Siemens I-gate 11M V4411-Z9X1

Podpora:	kompletní
Ovladač:	v jádře
Zastaralý:	ano

Technické parametry

802.11b, tedy pouze 11 Mb/s

Identifikace pod Linuxem

Karta se v lspci vubec nevypisuje, takze prikladam pouze vypis iwconfig a iwlist wlan0 event.

# iwconfig
wifi0     IEEE 802.11b  ESSID:"test"
          Mode:Master  Frequency:2.422 GHz  Access Point: 00:90:D1:00:7B:06
          Bit Rate:11 Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off

wlan0     IEEE 802.11b  ESSID:"test"
          Mode:Master  Frequency:2.422 GHz  Access Point: 00:90:D1:00:7B:06
          Bit Rate:11 Mb/s   Sensitivity=1/3
          Retry min limit:8   RTS thr:off   Fragment thr:off
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:35   Missed beacon:0

# iwlist wlan0 event
wlan0     Wireless Events supported :
          0x8B04 : Set Frequency/Channel (kernel generated)
          0x8B06 : Set Mode (kernel generated)
          0x8B13 : Spy threshold crossed
          0x8B15 : New Access Point/Cell address - roaming
          0x8B19 : Scan request completed
          0x8B1A : Set ESSID (kernel generated)
          0x8B2A : Set Encoding (kernel generated)
          0x8C00 : Tx packet dropped - retry exceeded
          0x8C02 : Custom driver event
          0x8C03 : Registered node
          0x8C04 : Expired node

Postup zprovoznění pod Linuxem

K zprovozneni mi stacilo zasunout kartu a napsat:
# ifconfig wlan0 up
Tato PCMCIA karta umi Access Point mod, dokonce primo po vsunuti a zprovozneni je nastavena na mode master. Karta mi nefungovala jako klient tedy v modu Managed. Proste se nepripojila ani po zadani:

# iwconfig wlan0 mode managed
# iwconfig wifi0 mode managed
# iwconfig wlan0 ap < MAC adresa AP >

Navic se mi kartu nepodarilo primet scanovat (hned vedle AP):

# iwconfig wlan0 mode managed
# iwconfig wifi0 mode managed
# iwlist wifi0 scan
wifi0     No scan results
# iwlist wlan0 scan
wlan0     No scan results

Poznámka

Testovane jadra: 2.6.17-gentoo-r4, 2.6.15-1.2054_FC5

Pri pingovani na takto vytvoreny PC Card Access Point prichazeli duplicitni odpovedi.

Dokument vytvořil: krata, 9.8.2006 14:20 | Poslední úprava: krata, 27.2.2011 15:09 | Historie změn | Zobrazeno: 926×