Administrace komentářů

dmesg
Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000002000000 (usable)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
32MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 8192
zone(0): 4096 pages.
zone(1): 4096 pages.
zone(2): 0 pages.
DMI not present.
ACPI: Unable to locate RSDP
Building zonelist for node : 0
Kernel command line: root=/dev/hda1 devfs=mount hdb=ide-scsi
resume=/dev/hda5 splash=silent vga=785
ide_setup: hdb=ide-scsi
bootsplash: silent mode.
No local APIC present or hardware disabled
Initializing CPU#0
Detected 167.048 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 333.41 BogoMIPS
Memory: 28692k/32768k available (1508k kernel code, 3688k reserved,
-1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
Intel Pentium with F0 0F bug - workaround enabled. CPU: After generic, caps: 008001bf 00000000 00000000 00000000
CPU: Common caps: 008001bf 00000000 00000000 00000000
CPU: Intel Pentium MMX stepping 03
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: none
ACPI: Subsystem revision 20030813
PCI: PCI BIOS revision 2.10 entry at 0xfda01, last bus=0
PCI: Using configuration type 1
ACPI: System description tables not found
ACPI-0084: *** Error: acpi_load_tables: Could not get RSDP, AE_NOT_FOUND
ACPI-0134: *** Error: acpi_load_tables: Could not load tables: AE_NOT_FOUND
ACPI: Unable to load the System Description Tables
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
Activating ISA DMA hang workarounds.
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SAX Sound Board'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xfc000000, mapped to 0xc2800000, size 1200k
vesafb: mode is 640x480x16, linelength=1280, pages=2
vesafb: protected mode interface info at c000:7ea0
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture... no good signature found.
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c586b (rev 41) IDE UDMA33 controller on pci00:07.1
ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio
hda: WDC AC2850F, ATA DISK drive
hdb: WDC AC2200F, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdb: set_drive_speed_status: error=0x04 { DriveStatusError }
ide0: Drive 1 didn't accept speed setting. Oh, well.
hdb: set_drive_speed_status: status=0x51 { DriveReady SeekComplete Error }
hdb: set_drive_speed_status: error=0x04 { DriveStatusError }
ide0: Drive 1 didn't accept speed setting. Oh, well.
blk: queue c0180e5c, I/O limit 4095Mb (mask 0xffffffff)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 1667232 sectors (854 MB) w/64KiB Cache, CHS=827/32/63, DMA
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
hdb:<6>end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 0
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 1
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 3
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 4
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 5
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 6
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 7
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 0
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 1
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 3
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 4
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 5
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 6
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 7
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483640
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483641
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483642
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483643
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483644
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483645
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483640
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483641
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483642
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483643
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483644
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2147483645
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 0
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 4
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 6
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 0
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 4
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 6
ldm_validate_partition_table(): Disk read failed.
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 0
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 2
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 4
end_request: I/O error, cmd 0 dev 03:40 (hdb), sector 6
unable to read partition table
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine: This is normal swap space
Swsusp 1.0.3: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 89k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Real Time Clock Driver v1.10e
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
Adding Swap: 76568k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
8139too Fast Ethernet driver 0.9.26
eth0: RealTek RTL8139 Fast Ethernet at 0xc2995f00, 00:11:3b:01:7d:ff, IRQ 10
eth0: Identified 8139 chip type 'RTL-8139C'
inserting floppy driver for 2.4.22-10mdk
FDC 0 is a post-1991 82077
i2c-core.o: i2c core module version 2.8.0 (20030714)
i2c-proc.o version 2.8.0 (20030714)
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

cat /proc/partitions
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect wuse running use aveq
3 0 833616 ide/host0/bus0/target0/lun0/disc 3949 6005 79466 95240 608 1810 19392 45250 -1 508020 42529052
3 1 756976 ide/host0/bus0/target0/lun0/part1 3920 5879 78386 94130 482 529 8128 30530 0 75970 124660
3 2 1 ide/host0/bus0/target0/lun0/part2 0 0 0 0 0 0 0 0 0 0 0
3 5 76576 ide/host0/bus0/target0/lun0/part5 25 106 1048 1020 126 1281 11264 14720 0 5450 15740
3 64 1073741823 hdb 7 33 52 120 0 0 0 0 0 120 120