Administrace komentářů

vzhladom na to ze mi prisiel dotaz mailom ako som to robil, tak popisem presne postup.

nameif premenovava nazov sietoveho rozhrania (u mna ethX) podla mac adresy
nameif sa MUSI pustat pred nahodenim network, inac bude koncit chybou
network sa v fc5 startuje linkom:

/etc/rc3.d/@S10network

teda som si spravil dalsie dva linky, ktore sa startuju pred network a spustaju nameif s konfiguracnym suborom urcenim pomocou -c /cesta/k/file:

lrwxrwxrwx 1 root root 19 May 29 11:29 S08eth_mac -> /etc/init.d/eth_mac
lrwxrwxrwx 1 root root 20 May 29 11:29 S09eth_mac1 -> /etc/init.d/eth_mac1

cat eth_mac
/sbin/nameif -c /etc/mactab

cat eth_mac1
/sbin/nameif -c /etc/mactab1

teda S08 pusti nameif s configom mactab
a S09 s configom mactab1

preco najskor s mactab a potom s mactab1 ?
lebo pri premenovavani interface sa nemoze pouzit nazov i-face, ktory uz v systeme existuje, teda je mu nieco priradene (davalo mi to chybu, tak som to takto obisiel) - tak si najskor interface premenujem na nejake pomocne eethX (take v systeme urcite nie je) podla mac adries a hned potom na ethX, pretoze ani take uz v systeme nie je, lebo mame v systeme eethX

cat mactab
eeth0 00:30:4f:49:a4:33
eeth1 00:30:4f:15:fc:64
eeth2 00:30:4f:49:a4:47
eeth3 00:13:d3:99:aa:7b

cat mactab1
eth0 00:30:4f:49:a4:33
eth1 00:30:4f:15:fc:64
eth2 00:30:4f:49:a4:47
eth3 00:13:d3:99:aa:7b

a teraz vzdy po reboote(aspon dufam :) bude pridenie ethX podla mac adries ako je v mactab1

 ip addr
1: lo:  mtu 16436 qdisc noqueue
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth1:  mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:30:4f:15:fc:64 brd ff:ff:ff:ff:ff:ff
3: eth0: mtu 1500 qdisc htb qlen 1000
    link/ether 00:30:4f:49:a4:33 brd ff:ff:ff:ff:ff:ff
4: eth2:  mtu 1500 qdisc htb qlen 1000
    link/ether 00:30:4f:49:a4:47 brd ff:ff:ff:ff:ff:ff
5: eth3:  mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:13:d3:99:aa:7b brd ff:ff:ff:ff:ff:ff
    

nazvy jednotlivych linkov a suborou si zvolte asi ine, "viacej vypovedajuce" ako som pisal pomocou udev som to neskusal, ale asi by to bolo "elegantnejsie riesenie" ...