Administrace komentářů

Tak tu je poslední příkaz

====dmesg====

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008 (Ubuntu 2.6.24-19.34-generic)

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)

[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)

[ 0.000000] BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)

[ 0.000000] BIOS-e820: 00000000c0000000 - 00000000d0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)

[ 0.000000] 0MB HIGHMEM available.

[ 0.000000] 511MB LOWMEM available.

[ 0.000000] found SMP MP-table at 000f5160

[ 0.000000] Entering add_active_range(0, 0, 131056) 0 entries of 256 used

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0 -> 4096

[ 0.000000] Normal 4096 -> 131056

[ 0.000000] HighMem 131056 -> 131056

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] early_node_map[1] active PFN ranges

[ 0.000000] 0: 0 -> 131056

[ 0.000000] On node 0 totalpages: 131056

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 4064 pages, LIFO batch:0

[ 0.000000] Normal zone: 991 pages used for memmap

[ 0.000000] Normal zone: 125969 pages, LIFO batch:31

[ 0.000000] HighMem zone: 0 pages used for memmap

[ 0.000000] Movable zone: 0 pages used for memmap

[ 0.000000] DMI 2.3 present.

[ 0.000000] ACPI: RSDP signature @ 0xC00F6B40 checksum 0

[ 0.000000] ACPI: RSDP 000F6B40, 0014 (r0 GBT )

[ 0.000000] ACPI: RSDT 1FFF3040, 0030 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)

[ 0.000000] ACPI: FACP 1FFF30C0, 0074 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)

[ 0.000000] ACPI: DSDT 1FFF3180, 388E (r1 GBT AWRDACPI 1000 MSFT 100000C)

[ 0.000000] ACPI: FACS 1FFF0000, 0040

[ 0.000000] ACPI: MCFG 1FFF6B40, 003C (r1 GBT AWRDACPI 42302E31 AWRD 1010101)

[ 0.000000] ACPI: APIC 1FFF6A80, 0068 (r1 GBT AWRDACPI 42302E31 AWRD 1010101)

[ 0.000000] ACPI: PM-Timer IO Port: 0x408

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)

[ 0.000000] Processor #0 15:4 APIC version 20

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:a0000000)

[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000

[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130033

[ 0.000000] Kernel command line: root=UUID=682e8c9d-1b7d-417c-b491-38bbaf1f6eee ro quiet splash

[ 0.000000] mapped APIC to ffffb000 (fee00000)

[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)

[ 0.000000] Enabling fast FPU save and restore... done.

[ 0.000000] Enabling unmasked SIMD FPU exception support... done.

[ 0.000000] Initializing CPU#0

[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)

[ 0.000000] Detected 2679.717 MHz processor.

[ 14.589889] Console: colour VGA+ 80x25

[ 14.589893] console [tty0] enabled

[ 14.590115] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 14.590352] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 14.599187] Memory: 507268k/524224k available (2177k kernel code, 16360k reserved, 1006k data, 368k init, 0k highmem)

[ 14.599195] virtual kernel memory layout:

[ 14.599196] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)

[ 14.599197] pkmap : 0xff800000 - 0xffc00000 (4096 kB)

[ 14.599198] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)

[ 14.599199] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)

[ 14.599200] .init : 0xc0421000 - 0xc047d000 ( 368 kB)

[ 14.599201] .data : 0xc0320434 - 0xc041bdc4 (1006 kB)

[ 14.599203] .text : 0xc0100000 - 0xc0320434 (2177 kB)

[ 14.599207] Checking if this processor honours the WP bit even in supervisor mode... Ok.

[ 14.599245] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1

[ 14.679240] Calibrating delay using timer specific routine.. 5364.85 BogoMIPS (lpj=10729714)

[ 14.679266] Security Framework initialized

[ 14.679270] SELinux: Disabled at boot.

[ 14.679284] AppArmor: AppArmor initialized

[ 14.679289] Failure registering capabilities with primary security module.

[ 14.679298] Mount-cache hash table entries: 512

[ 14.679427] Initializing cgroup subsys ns

[ 14.679433] Initializing cgroup subsys cpuacct

[ 14.679447] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000451d 00000000 00000000 00000000

[ 14.679458] monitor/mwait feature present.

[ 14.679460] using mwait in idle threads.

[ 14.679467] CPU: Trace cache: 12K uops, L1 D cache: 16K

[ 14.679470] CPU: L2 cache: 256K

[ 14.679472] CPU: Hyper-Threading is disabled

[ 14.679475] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000451d 00000000 00000000 00000000

[ 14.679486] Compat vDSO mapped to ffffe000.

[ 14.679504] Checking 'hlt' instruction... OK.

[ 14.695713] SMP alternatives: switching to UP code

[ 14.697678] Freeing SMP alternatives: 11k freed

[ 14.697826] Early unpacking initramfs... done

[ 15.046617] ACPI: Core revision 20070126

[ 15.046674] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.

[ 15.049045] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 01

[ 15.049088] Total of 1 processors activated (5364.85 BogoMIPS).

[ 15.049241] ENABLING IO-APIC IRQs

[ 15.049420] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 15.195131] Brought up 1 CPUs

[ 15.195158] CPU0 attaching sched-domain:

[ 15.195162] domain 0: span 01

[ 15.195164] groups: 01

[ 15.195405] net_namespace: 64 bytes

[ 15.195414] Booting paravirtualized kernel on bare hardware

[ 15.196094] Time: 8:02:03 Date: 06/25/08

[ 15.196126] NET: Registered protocol family 16

[ 15.196453] EISA bus registered

[ 15.196484] ACPI: bus type pci registered

[ 15.221473] PCI: PCI BIOS revision 3.00 entry at 0xfb290, last bus=2

[ 15.221477] PCI: Using configuration type 1

[ 15.221483] Setting up standard PCI resources

[ 15.224038] ACPI: EC: Look up EC in DSDT

[ 15.227835] ACPI: Interpreter enabled

[ 15.227841] ACPI: (supports S0 S1 S4 S5)

[ 15.227860] ACPI: Using IOAPIC for interrupt routing

[ 15.234032] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 15.234645] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO

[ 15.234650] PCI quirk: region 0480-04bf claimed by ICH6 GPIO

[ 15.235158] PCI: Transparent bridge - 0000:00:1e.0

[ 15.235193] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 15.235374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]

[ 15.243390] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)

[ 15.243502] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)

[ 15.243611] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)

[ 15.243721] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 15.243829] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[ 15.243937] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)

[ 15.244043] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.

[ 15.244156] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)

[ 15.244359] Linux Plug and Play Support v0.97 (c) Adam Belay

[ 15.244411] pnp: PnP ACPI init

[ 15.244424] ACPI: bus type pnp registered

[ 15.248064] pnpacpi: exceeded the max number of mem resources: 12

[ 15.248182] pnp: PnP ACPI: found 13 devices

[ 15.248186] ACPI: ACPI bus type pnp unregistered

[ 15.248192] PnPBIOS: Disabled by ACPI PNP

[ 15.248562] PCI: Using ACPI for IRQ routing

[ 15.248567] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report

[ 15.271105] NET: Registered protocol family 8

[ 15.271109] NET: Registered protocol family 20

[ 15.271220] AppArmor: AppArmor Filesystem Enabled

[ 15.275048] Time: tsc clocksource has been installed.

[ 15.283122] system 00:01: ioport range 0x4d0-0x4d1 has been reserved

[ 15.283126] system 00:01: ioport range 0x290-0x29f has been reserved

[ 15.283129] system 00:01: ioport range 0x800-0x87f has been reserved

[ 15.283132] system 00:01: ioport range 0x880-0x88f has been reserved

[ 15.283146] system 00:0a: ioport range 0x400-0x4bf could not be reserved

[ 15.283154] system 00:0b: iomem range 0xc0000000-0xcfffffff could not be reserved

[ 15.283161] system 00:0c: iomem range 0xcee00-0xcffff has been reserved

[ 15.283164] system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved

[ 15.283166] system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved

[ 15.283169] system 00:0c: iomem range 0xfc000-0xfffff could not be reserved

[ 15.283172] system 00:0c: iomem range 0x1fff0000-0x1fffffff could not be reserved

[ 15.283175] system 00:0c: iomem range 0x0-0x9ffff could not be reserved

[ 15.283178] system 00:0c: iomem range 0x100000-0x1ffeffff could not be reserved

[ 15.283181] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 15.283184] system 00:0c: iomem range 0xfed13000-0xfed1dfff could not be reserved

[ 15.283187] system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved

[ 15.283190] system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved

[ 15.283193] system 00:0c: iomem range 0xffb00000-0xffbfffff could not be reserved

[ 15.313836] PCI: Bridge: 0000:00:01.0

[ 15.313839] IO window: disabled.

[ 15.313844] MEM window: d0000000-efffffff

[ 15.313849] PREFETCH window: 30000000-300fffff

[ 15.313855] PCI: Bridge: 0000:00:1e.0

[ 15.313858] IO window: a000-afff

[ 15.313863] MEM window: f0000000-f1ffffff

[ 15.313867] PREFETCH window: disabled.

[ 15.313889] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 15.313896] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 15.313908] PCI: Setting latency timer of device 0000:00:1e.0 to 64

[ 15.313924] NET: Registered protocol family 2

[ 15.351108] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

[ 15.351403] TCP established hash table entries: 16384 (order: 5, 131072 bytes)

[ 15.351488] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)

[ 15.351571] TCP: Hash tables configured (established 16384 bind 16384)

[ 15.351574] TCP reno registered

[ 15.363221] checking if image is initramfs... it is

[ 15.814876] Switched to high resolution mode on CPU 0

[ 16.042692] Freeing initrd memory: 7722k freed

[ 16.043610] audit: initializing netlink socket (disabled)

[ 16.043627] audit(1214380923.340:1): initialized

[ 16.046357] VFS: Disk quotas dquot_6.5.1

[ 16.046469] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 16.046673] io scheduler noop registered

[ 16.046676] io scheduler anticipatory registered

[ 16.046678] io scheduler deadline registered

[ 16.046698] io scheduler cfq registered (default)

[ 16.046817] Boot video device is 0000:01:00.0

[ 16.046982] PCI: Setting latency timer of device 0000:00:01.0 to 64

[ 16.047030] assign_interrupt_mode Found MSI capability

[ 16.047070] Allocate Port Service[0000:00:01.0:pcie00]

[ 16.047431] isapnp: Scanning for PnP cards...

[ 16.399346] isapnp: No Plug & Play device found

[ 16.479351] Real Time Clock Driver v1.12ac

[ 16.479490] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled

[ 16.479646] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 16.479940] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 16.481202] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 16.481866] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A

[ 16.483143] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize

[ 16.483242] input: Macintosh mouse button emulation as /devices/virtual/input/input0

[ 16.483394] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1

[ 16.483398] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[ 16.483855] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 16.486826] mice: PS/2 mouse device common for all mice

[ 16.487026] EISA: Probing bus 0 at eisa.0

[ 16.487057] EISA: Detected 0 cards.

[ 16.487060] cpuidle: using governor ladder

[ 16.487062] cpuidle: using governor menu

[ 16.487156] NET: Registered protocol family 1

[ 16.487191] Using IPI No-Shortcut mode

[ 16.487225] registered taskstats version 1

[ 16.487324] Magic number: 12:685:18

[ 16.487337] hash matches device ttycf

[ 16.487459] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 16.487461] EDD information not available.

[ 16.487763] Freeing unused kernel memory: 368k freed

[ 16.522591] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1

[ 17.775198] fuse init (API version 7.9)

[ 17.803430] ACPI: Processor [CPU0] (supports 2 throttling states)

[ 17.803449] ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]

[ 18.464629] usbcore: registered new interface driver usbfs

[ 18.464660] usbcore: registered new interface driver hub

[ 18.473870] usbcore: registered new device driver usb

[ 18.485198] USB Universal Host Controller Interface driver v3.0

[ 18.485276] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 17

[ 18.485292] PCI: Setting latency timer of device 0000:00:1d.0 to 64

[ 18.485296] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 18.485613] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1

[ 18.485652] uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000bc00

[ 18.486160] usb usb1: configuration #1 chosen from 1 choice

[ 18.486203] hub 1-0:1.0: USB hub found

[ 18.486212] hub 1-0:1.0: 2 ports detected

[ 18.578087] SCSI subsystem initialized

[ 18.589887] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18

[ 18.589902] PCI: Setting latency timer of device 0000:00:1d.1 to 64

[ 18.589907] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 18.589941] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2

[ 18.589973] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000

[ 18.590107] usb usb2: configuration #1 chosen from 1 choice

[ 18.590139] hub 2-0:1.0: USB hub found

[ 18.590147] hub 2-0:1.0: 2 ports detected

[ 18.621910] libata version 3.00 loaded.

[ 18.693854] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19

[ 18.693869] PCI: Setting latency timer of device 0000:00:1d.2 to 64

[ 18.693874] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 18.693908] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3

[ 18.693940] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400

[ 18.694078] usb usb3: configuration #1 chosen from 1 choice

[ 18.694114] hub 3-0:1.0: USB hub found

[ 18.694123] hub 3-0:1.0: 2 ports detected

[ 18.797857] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16

[ 18.797872] PCI: Setting latency timer of device 0000:00:1d.3 to 64

[ 18.797876] uhci_hcd 0000:00:1d.3: UHCI Host Controller

[ 18.797910] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4

[ 18.797944] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800

[ 18.798092] usb usb4: configuration #1 chosen from 1 choice

[ 18.798125] hub 4-0:1.0: USB hub found

[ 18.798133] hub 4-0:1.0: 2 ports detected

[ 18.901921] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 17

[ 18.901940] PCI: Setting latency timer of device 0000:00:1d.7 to 64

[ 18.901944] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 18.901988] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5

[ 18.905910] PCI: cache line size of 128 is not supported by device 0000:00:1d.7

[ 18.905919] ehci_hcd 0000:00:1d.7: irq 17, io mem 0xf2000000

[ 18.921635] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004

[ 18.921797] usb usb5: configuration #1 chosen from 1 choice

[ 18.921830] hub 5-0:1.0: USB hub found

[ 18.921839] hub 5-0:1.0: 8 ports detected

[ 19.025975] ACPI: PCI Interrupt 0000:02:05.0[A] -> GSI 21 (level, low) -> IRQ 20

[ 19.026018] skge 1.13 addr 0xf1000000 irq 20 chip Yukon-Lite rev 9

[ 19.026380] skge eth0: addr 00:0f:ea:8b:f2:99

[ 19.026552] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18

[ 19.026602] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 19.026617] ACPI: PCI interrupt for device 0000:00:1f.2 disabled

[ 19.034522] ata_piix 0000:00:1f.2: version 2.12

[ 19.034531] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]

[ 19.034554] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18

[ 19.034599] PCI: Setting latency timer of device 0000:00:1f.2 to 64

[ 19.035726] scsi0 : ata_piix

[ 19.036813] scsi1 : ata_piix

[ 19.037592] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14

[ 19.037596] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15

[ 19.209713] ata1.00: HPA unlocked: 625140335 -> 625142448, native 625142448

[ 19.209722] ata1.00: ATA-6: WDC WD3200SD-01KNB0, 08.05J08, max UDMA/100

[ 19.209725] ata1.00: 625142448 sectors, multi 16: LBA48

[ 19.225955] ata1.00: configured for UDMA/100

[ 19.553804] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H12N, UL01, max UDMA/66

[ 19.557374] usb 3-1: new low speed USB device using uhci_hcd and address 2

[ 19.561690] ata2.01: HPA unlocked: 156365903 -> 156368016, native 156368016

[ 19.561696] ata2.01: ATA-6: SAMSUNG SP8004H, QW100-60, max UDMA/100

[ 19.561699] ata2.01: 156368016 sectors, multi 16: LBA

[ 19.733569] ata2.00: configured for UDMA/66

[ 19.741654] ata2.01: configured for UDMA/100

[ 19.741802] scsi 0:0:0:0: Direct-Access ATA WDC WD3200SD-01K 08.0 PQ: 0 ANSI: 5

[ 19.746059] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H12N UL01 PQ: 0 ANSI: 5

[ 19.746669] scsi 1:0:1:0: Direct-Access ATA SAMSUNG SP8004H QW10 PQ: 0 ANSI: 5

[ 19.756691] usb 3-1: configuration #1 chosen from 1 choice

[ 19.760190] Driver 'sd' needs updating - please use bus_type methods

[ 19.760301] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)

[ 19.760319] sd 0:0:0:0: [sda] Write Protect is off

[ 19.760323] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 19.760348] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.760421] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)

[ 19.760436] sd 0:0:0:0: [sda] Write Protect is off

[ 19.760439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 19.760464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.760469] sda: sda2 < sda5 sda6 > sda3

[ 19.770739] sd 0:0:0:0: [sda] Attached SCSI disk

[ 19.770839] sd 1:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)

[ 19.770857] sd 1:0:1:0: [sdb] Write Protect is off

[ 19.770860] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 19.770886] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.770949] sd 1:0:1:0: [sdb] 156368016 512-byte hardware sectors (80060 MB)

[ 19.770964] sd 1:0:1:0: [sdb] Write Protect is off

[ 19.770967] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 19.770991] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 19.770997] sdb:<4>Driver 'sr' needs updating - please use bus_type methods

[ 19.774756] sdb1 sdb2 < sdb5<6>usbcore: registered new interface driver hiddev

[ 19.801093] sdb6 sdb7 >

[ 19.818988] sd 1:0:1:0: [sdb] Attached SCSI disk

[ 19.831215] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 19.831243] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 19.831266] sd 1:0:1:0: Attached scsi generic sg2 type 0

[ 19.834802] input: HID 1241:1166 as /devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/input/input2

[ 19.835685] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray

[ 19.835692] Uniform CD-ROM driver Revision: 3.20

[ 19.835763] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 19.845393] input,hidraw0: USB HID v1.10 Mouse [HID 1241:1166] on usb-0000:00:1d.2-1

[ 19.845416] usbcore: registered new interface driver usbhid

[ 19.845420] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver

[ 20.234305] Attempting manual resume

[ 20.234311] swsusp: Resume From Partition 8:5

[ 20.234312] PM: Checking swsusp image.

[ 20.234527] PM: Resume from disk failed.

[ 20.245845] ReiserFS: sda6: found reiserfs format "3.6" with standard journal

[ 20.245857] ReiserFS: sda6: using ordered data mode

[ 20.256316] ReiserFS: sda6: journal params: device sda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30

[ 20.257337] ReiserFS: sda6: checking transaction log (sda6)

[ 20.281964] ReiserFS: sda6: Using r5 hash to sort names

[ 28.421981] Linux agpgart interface v0.102

[ 28.478475] iTCO_vendor_support: vendor-support=0

[ 28.538742] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)

[ 28.538886] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)

[ 28.538922] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

[ 28.689832] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 28.731371] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 28.894386] intel_rng: FWH not detected

[ 28.937770] input: PC Speaker as /devices/platform/pcspkr/input/input3

[ 29.165793] input: Power Button (FF) as /devices/virtual/input/input4

[ 29.181132] ACPI: Power Button (FF) [PWRF]

[ 29.181270] input: Power Button (CM) as /devices/virtual/input/input5

[ 29.193781] ACPI: Power Button (CM) [PWRB]

[ 29.657569] parport_pc 00:08: reported by Plug and Play ACPI

[ 29.657621] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]

[ 30.418508] ACPI: PCI Interrupt 0000:00:1e.2[A] -> GSI 17 (level, low) -> IRQ 21

[ 30.418536] PCI: Setting latency timer of device 0000:00:1e.2 to 64

[ 30.740924] intel8x0_measure_ac97_clock: measured 54486 usecs

[ 30.740928] intel8x0: clocking to 48000

[ 30.859345] nvidia: module license 'NVIDIA' taints kernel.

[ 31.754834] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

[ 31.754846] PCI: Setting latency timer of device 0000:01:00.0 to 64

[ 31.755099] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008

[ 34.226669] lp0: using parport0 (interrupt-driven).

[ 34.281233] Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k

[ 40.760705] device-mapper: uevent: version 1.0.3

[ 40.760742] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com

[ 42.022884] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 42.474176] No dock devices found.

[ 43.713674] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

[ 43.713681] apm: overridden by ACPI.

[ 43.829280] ppdev: user-space parallel port driver

[ 43.926119] audit(1214380951.817:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4897 profile="/usr/sbin/cupsd" namespace="default"

[ 45.584796] skge eth0: enabling interface

[ 45.736372] Bluetooth: Core ver 2.11

[ 45.737183] NET: Registered protocol family 31

[ 45.737189] Bluetooth: HCI device and connection manager initialized

[ 45.737194] Bluetooth: HCI socket layer initialized

[ 45.778068] Bluetooth: L2CAP ver 2.9

[ 45.778075] Bluetooth: L2CAP socket layer initialized

[ 45.866969] Bluetooth: RFCOMM socket layer initialized

[ 45.867278] Bluetooth: RFCOMM TTY layer initialized

[ 45.867285] Bluetooth: RFCOMM ver 1.8

[ 48.866731] skge eth0: Link is up at 100 Mbps, full duplex, flow control both

[ 51.135538] NET: Registered protocol family 17

[ 53.953459] NET: Registered protocol family 10

[ 53.954062] lo: Disabled Privacy Extensions

[ 64.710713] eth0: no IPv6 routers present

[ 2397.584954] process `skype' is using obsolete setsockopt SO_BSDCOMPAT