Přihlášení | Registrace

napište » Zprávičky

VASA-1, generování mluvící hlavy z jediné fotky a zvukového záznamu

dnes 14:22 | IT novinky

VASA-1, výzkumný projekt Microsoftu. Na vstupu stačí jediná fotka a zvukový záznam. Na výstupu je dokonalá mluvící nebo zpívající hlava. Prý si technologii nechá jenom pro sebe. Žádné demo, API nebo placená služba. Zatím.

Ladislav Hagara | Komentářů: 0

MagPi 140 a HackSpace 77

dnes 04:44 | Nová verze

Nová čísla časopisů od nakladatelství Raspberry Pi: MagPi 140 (pdf) a HackSpace 77 (pdf).

Ladislav Hagara | Komentářů: 0

ESPHome 2024.4.0

dnes 01:00 | Nová verze

ESPHome, tj. open source systém umožňující nastavovat zařízení s čipy ESP (i dalšími) pomocí konfiguračních souborů a připojit je do domácí automatizace, například do Home Assistantu, byl vydán ve verzi 2024.4.0.

Ladislav Hagara | Komentářů: 0

Open Platform for Enterprise AI (OPEA)

včera 22:11 | IT novinky

LF AI & Data Foundation patřící pod Linux Foundation spustila Open Platform for Enterprise AI (OPEA).

Ladislav Hagara | Komentářů: 0

OpenXR 1.1

včera 20:55 | Nová verze

Neziskové průmyslové konsorcium Khronos Group vydalo verzi 1.1 specifikace OpenXR (Wikipedie), tj. standardu specifikujícího přístup k platformám a zařízením pro XR, tj. platformám a zařízením pro AR (rozšířenou realitu) a VR (virtuální realitu). Do základu se z rozšíření dostalo XR_EXT_local_floor. Společnost Collabora implementuje novou verzi specifikace do platformy Monado, tj. open source implementace OpenXR.

Ladislav Hagara | Komentářů: 2

mpv 0.38.0

včera 17:22 | Nová verze

Byla vydána nová verze 0.38.0 multimediálního přehrávače mpv (Wikipedie) vycházejícího z přehrávačů MPlayer a mplayer2. Přehled novinek, změn a oprav na GitHubu. Požadován je FFmpeg 4.4 nebo novější a také libplacebo 6.338.2 nebo novější.

Ladislav Hagara | Komentářů: 13

ClamAV 1.3.1, 1.2.3 a 1.0.6

včera 17:11 | Nová verze

ClamAV (Wikipedie), tj. multiplatformní antivirový engine s otevřeným zdrojovým kódem pro detekci trojských koní, virů, malwaru a dalších škodlivých hrozeb, byl vydán ve verzích 1.3.1, 1.2.3 a 1.0.6. Ve verzi 1.3.1 je mimo jiné řešena bezpečnostní chyba CVE-2024-20380.

Ladislav Hagara | Komentářů: 2

Mobilní aplikace Portál občana je ode dneška oficiálně venku

včera 12:11 | IT novinky

Digitální a informační agentura (DIA) oznámila (PDF, X a Facebook), že mobilní aplikace Portál občana je ode dneška oficiálně venku.

Ladislav Hagara | Komentářů: 10

#HACKUJBRNO 2024

včera 05:11 | Komunita

#HACKUJBRNO 2024, byly zveřejněny výsledky a výstupy hackathonu města Brna nad otevřenými městskými daty, který se konal 13. a 14. dubna 2024.

Ladislav Hagara | Komentářů: 2

Volla Tablet na Kickstarteru

17.4. 17:55 | IT novinky

Společnost Volla Systeme stojící za telefony Volla spustila na Kickstarteru kampaň na podporu tabletu Volla Tablet s Volla OS nebo Ubuntu Touch.

Ladislav Hagara | Komentářů: 3

Centrum | Napsat | Starší

navrhněte » Anketa

KDE Plasma 6

už používám (68%)

čekám, až se dostane do mé distibuce (10%)

čekám na pozdější vydání v řadě (2%)

preferuji jiné desktopové prostředí (20%)

Celkem 563 hlasů

Komentářů: 4, poslední 6.4. 15:51

Rozcestník

AbcLinuxu

HDmag.cz

Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

7.5.2009 23:48 SHX
Rozbalit Rozbalit vše Re: Arch: Po aktulizaci nejde zvuk

<code>FATAL: Module snd_intel_hda not found.</code>

<pre>

bash-3.2# dmesg
Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.3.3 (GCC) ) #1 SMP PREEMPT Wed Apr 29 14:25:30 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff90000 (usable)
BIOS-e820: 000000003ff90000 - 000000003ff9e000 (ACPI data)
BIOS-e820: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS)
BIOS-e820: 000000003ffe0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Malformed early option 'acpi'
DMI 2.4 present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
last_pfn = 0x3ff90 max_arch_pfn = 0x100000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e4000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000003ff90000 (usable)
modified: 000000003ff90000 - 000000003ff9e000 (ACPI data)
modified: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS)
modified: 000000003ffe0000 - 0000000040000000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ffb00000 - 0000000100000000 (reserved)
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 3fec9000 - 3ff7f80b
Allocated new RAMDISK: 005ae000 - 0066480b
Move RAMDISK from 000000003fec9000 - 000000003ff7f80a to 005ae000 - 0066480a
ACPI: RSDP 000FA9B0, 0024 (r2 ACPIAM)
ACPI: XSDT 3FF90100, 004C (r1 MSTEST OEMXSDT 12000830 MSFT       97)
ACPI: FACP 3FF90290, 00F4 (r3 MSTEST OEMFACP 12000830 MSFT       97)
FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
ACPI: DSDT 3FF905C0, 928C (r1 A0545 A0545000        0 INTL 20060113)
ACPI: FACS 3FF9E000, 0040
ACPI: APIC 3FF90390, 006C (r1 MSTEST OEMAPIC 12000830 MSFT       97)
ACPI: MCFG 3FF90400, 003C (r1 MSTEST OEMMCFG 12000830 MSFT       97)
ACPI: OEMB 3FF9E040, 007B (r1 MSTEST AMI_OEM 12000830 MSFT       97)
ACPI: HPET 3FF99850, 0038 (r1 MSTEST OEMHPET 12000830 MSFT       97)
ACPI: Local APIC address 0xfee00000
135MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 00000000 - 377fe000
bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 00005aa604]    TEXT DATA BSS ==> [0000100000 - 00005aa604]
#4 [00005ab000 - 00005ae000]    INIT_PG_TABLE ==> [00005ab000 - 00005ae000]
#5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
#6 [0000010000 - 0000011000]          PGTABLE ==> [0000010000 - 0000011000]
#7 [00005ae000 - 000066480b]      NEW RAMDISK ==> [00005ae000 - 000066480b]
#8 [0000011000 - 0000018000]          BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA      0x00000010 -> 0x00001000
Normal   0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0003ff90
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x0003ff90
On node 0 totalpages: 261919
free_area_init_node: node 0, pgdat c0434600, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 272 pages used for memmap
HighMem zone: 34434 pages, LIFO batch:7
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a202 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Allocating 36864 bytes of per cpu data
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259871
Kernel command line: root=/dev/disk/by-uuid/961ed512-9405-4c73-8852-af95416b2475 ro acpi=on apm=off
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
Fast TSC calibration using PIT
Detected 4326.553 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1032652k/1048128k available (2379k kernel code, 14696k reserved, 1059k data, 356k init, 138824k highmem)
virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000   (1116 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000   ( 887 MB)
      .init : 0xc0461000 - 0xc04ba000   ( 356 kB)
      .data : 0xc0352cbf - 0xc045ba88   (1059 kB)
      .text : 0xc0100000 - 0xc0352cbf   (2379 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 8656.65 BogoMIPS (lpj=14421843)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20081204
ACPI: Checking initramfs for custom DSDT
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel Pentium(R) Dual-Core CPU      E5300 @ 2.60GHz stepping 0a
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 8656.19 BogoMIPS (lpj=14421114)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel Pentium(R) Dual-Core CPU      E5300 @ 2.60GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (17312.84 BogoMIPS).
net_namespace: 1016 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20 io port: [0xdc00-0xdc1f]
pci 0000:00:1a.1: reg 20 io port: [0xe000-0xe01f]
pci 0000:00:1a.7: reg 10 32bit mmio: [0xfebffc00-0xfebfffff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10 64bit mmio: [0xfebf8000-0xfebfbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.1: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.2: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xfebff800-0xfebffbff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
pci 0000:00:1f.2: reg 10 io port: [0xec00-0xec07]
pci 0000:00:1f.2: reg 14 io port: [0xe880-0xe883]
pci 0000:00:1f.2: reg 18 io port: [0xe800-0xe807]
pci 0000:00:1f.2: reg 1c io port: [0xe480-0xe483]
pci 0000:00:1f.2: reg 20 io port: [0xe400-0xe40f]
pci 0000:00:1f.2: reg 24 io port: [0xe080-0xe08f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
pci 0000:00:1f.5: reg 10 io port: [0xd400-0xd407]
pci 0000:00:1f.5: reg 14 io port: [0xd080-0xd083]
pci 0000:00:1f.5: reg 18 io port: [0xd000-0xd007]
pci 0000:00:1f.5: reg 1c io port: [0xcc00-0xcc03]
pci 0000:00:1f.5: reg 20 io port: [0xc880-0xc88f]
pci 0000:00:1f.5: reg 24 io port: [0xc800-0xc80f]
pci 0000:00:1f.5: PME# supported from D3hot
pci 0000:00:1f.5: PME# disabled
pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xd7ffffff]
pci 0000:01:00.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
pci 0000:01:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
pci 0000:00:01.0: bridge 32bit mmio: [0xfa800000-0xfe8fffff]
pci 0000:00:01.0: bridge 64bit mmio pref: [0xcfe00000-0xdfdfffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff]
pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff]
pci 0000:03:00.0: reg 18 64bit mmio: [0xfeaff000-0xfeafffff]
pci 0000:03:00.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.3: bridge io port: [0xb000-0xbfff]
pci 0000:00:1c.3: bridge 32bit mmio: [0xfea00000-0xfeafffff]
pci 0000:02:00.0: reg 24 32bit mmio: [0xfe9fe000-0xfe9fffff]
pci 0000:02:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9effff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10 io port: [0xac00-0xac07]
pci 0000:02:00.1: reg 14 io port: [0xa880-0xa883]
pci 0000:02:00.1: reg 18 io port: [0xa800-0xa807]
pci 0000:02:00.1: reg 1c io port: [0xa480-0xa483]
pci 0000:02:00.1: reg 20 io port: [0xa400-0xa40f]
pci 0000:00:1c.4: bridge io port: [0xa000-0xafff]
pci 0000:00:1c.4: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15)
ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 12, should be 0D [20081204]
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 15 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
system 00:07: ioport range 0x290-0x297 has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved
system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved
system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0e: iomem range 0x0-0x9ffff could not be reserved
system 00:0e: iomem range 0xc0000-0xcffff could not be reserved
system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0:   IO window: disabled
pci 0000:00:01.0:   MEM window: 0xfa800000-0xfe8fffff
pci 0000:00:01.0:   PREFETCH window: 0x000000cfe00000-0x000000dfdfffff
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0:   IO window: disabled
pci 0000:00:1c.0:   MEM window: disabled
pci 0000:00:1c.0:   PREFETCH window: 0x000000dfe00000-0x000000dfefffff
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.3:   IO window: 0xb000-0xbfff
pci 0000:00:1c.3:   MEM window: 0xfea00000-0xfeafffff
pci 0000:00:1c.3:   PREFETCH window: disabled
pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.4:   IO window: 0xa000-0xafff
pci 0000:00:1c.4:   MEM window: 0xfe900000-0xfe9fffff
pci 0000:00:1c.4:   PREFETCH window: disabled
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0:   IO window: disabled
pci 0000:00:1e.0:   MEM window: disabled
pci 0000:00:1e.0:   PREFETCH window: disabled
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:01: resource 0 mem: [0x0-0x0]
pci_bus 0000:01: resource 1 mem: [0xfa800000-0xfe8fffff]
pci_bus 0000:01: resource 2 mem: [0xcfe00000-0xdfdfffff]
pci_bus 0000:01: resource 3 mem: [0x0-0x0]
pci_bus 0000:04: resource 0 mem: [0x0-0x0]
pci_bus 0000:04: resource 1 mem: [0x0-0x0]
pci_bus 0000:04: resource 2 mem: [0xdfe00000-0xdfefffff]
pci_bus 0000:04: resource 3 mem: [0x0-0x0]
pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
pci_bus 0000:03: resource 2 mem: [0x0-0x0]
pci_bus 0000:03: resource 3 mem: [0x0-0x0]
pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
pci_bus 0000:02: resource 2 mem: [0x0-0x0]
pci_bus 0000:02: resource 3 mem: [0x0-0x0]
pci_bus 0000:05: resource 0 mem: [0x0-0x0]
pci_bus 0000:05: resource 1 mem: [0x0-0x0]
pci_bus 0000:05: resource 2 mem: [0x0-0x0]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs... done
Freeing initrd memory: 730k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled on user request.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1241694369.310:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1747
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:01.0: setting latency timer to 64
pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.4: setting latency timer to 64
pcieport-driver 0000:00:1c.4: irq 27 for MSI/MSI-X
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 356k freed
SCSI subsystem initialized
libata version 3.00 loaded.
pata_acpi 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.2: setting latency timer to 64
pata_acpi 0000:00:1f.2: PCI INT B disabled
pata_acpi 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:00:1f.5: setting latency timer to 64
pata_acpi 0000:00:1f.5: PCI INT B disabled
pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_acpi 0000:02:00.1: setting latency timer to 64
pata_acpi 0000:02:00.1: PCI INT B disabled
pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pata_jmicron 0000:02:00.1: setting latency timer to 64
scsi0 : pata_jmicron
scsi1 : pata_jmicron
ata1: PATA max UDMA/100 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 17
ata2: PATA max UDMA/100 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4163B, A104, max UDMA/33
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-4163B A104 PQ: 0 ANSI: 5
ahci 0000:02:00.0: version 3.0
ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:02:00.0: setting latency timer to 64
scsi2 : ahci
scsi3 : ahci
ata3: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe100 irq 16
ata4: SATA max UDMA/133 abar m8192@0xfe9fe000 port 0xfe9fe180 irq 16
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata_piix 0000:00:1f.2: version 2.12
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: SATA max UDMA/133 cmd 0xec00 ctl 0xe880 bmdma 0xe400 irq 19
ata6: SATA max UDMA/133 cmd 0xe800 ctl 0xe480 bmdma 0xe408 irq 19
ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.01: SATA link down (SStatus 4 SControl 300)
ata5.00: ATA-8: WDC WD1600AAJS-00B4A0, 01.03A01, max UDMA/133
ata5.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata5.00: configured for UDMA/133
scsi 4:0:0:0: Direct-Access     ATA      WDC WD1600AAJS-0 01.0 PQ: 0 ANSI: 5
ata6.00: SATA link down (SStatus 0 SControl 300)
ata6.01: SATA link down (SStatus 4 SControl 300)
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi6 : ata_piix
scsi7 : ata_piix
ata7: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xc880 irq 19
ata8: SATA max UDMA/133 cmd 0xd000 ctl 0xcc00 bmdma 0xc888 irq 19
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfebffc00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebff800
Driver 'sr' needs updating - please use bus_type methods
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000dc00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000e000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d480
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d880
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
Driver 'sd' needs updating - please use bus_type methods
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 4:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 4:0:0:0: [sda] Attached SCSI disk
usb 5-2: new low speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: MLK Trust Mouse 15313 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2
generic-usb 0003:04FC:0538.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MLK Trust Mouse 15313] on usb-0000:00:1d.0-2/input0
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
udev: starting version 141
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: irq 28 for MSI/MSI-X
eth0: RTL8168b/8111b at 0xf8222000, 00:1d:60:74:b2:8f, XID 38000000 IRQ 28
input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button (CM) [PWRB]
ACPI: SSDT 3FF9E0C0, 0184 (r1    AMI   CPU1PM        1 INTL 20060113)
processor ACPI_CPU:00: registered as cooling_device0
ACPI: SSDT 3FF9E250, 013A (r1    AMI   CPU2PM        1 INTL 20060113)
processor ACPI_CPU:01: registered as cooling_device1
Linux agpgart interface v0.103
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
lp0: using parport0 (interrupt-driven).
input: PC Speaker as /devices/platform/pcspkr/input/input5
ppdev: user-space parallel port driver
i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003)
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
ACPI: Device needs an ACPI driver
sr 0:0:0:0: Attached scsi generic sg0 type 5
sd 4:0:0:0: Attached scsi generic sg1 type 0
nvidia: module license 'NVIDIA' taints kernel.
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
NVRM: loading NVIDIA UNIX x86 Kernel Module 180.51 Thu Apr 16 19:02:15 PDT 2009
EXT3 FS on sda2, internal journal
fuse init (API version 7.11)
EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2096440k swap on /dev/sda6. Priority:-1 extents:1 across:2096440k
r8169: eth0: link up
r8169: eth0: link up
warning: `proftpd' uses 32-bit capabilities (legacy support in use)
r8169: eth0: link up
r8169: eth0: link down
r8169: eth0: link up
r8169: eth0: link up
r8169: eth0: link down
r8169: eth0: link up
r8169: eth0: link up
IRQ 16/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
bash-3.2#

</pre>

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Píšeme jinde

ISSN 1214-1267 www.czech-server.cz

Redakce | Inzerce | Podmínky použití | Osobní údaje

Vaše jméno
Váš email
Typ požadavku

Slovní popis