Přihlášení | Registrace

napište » Zprávičky

Node.js 22

dnes 04:55 | Nová verze

OpenJS Foundation, oficiální projekt konsorcia Linux Foundation, oznámila vydání verze 22 otevřeného multiplatformního prostředí pro vývoj a běh síťových aplikací napsaných v JavaScriptu Node.js (Wikipedie). V říjnu se verze 22 stane novou aktivní LTS verzí. Podpora je plánována do dubna 2027.

Ladislav Hagara | Komentářů: 0

Proxmox Virtual Environment 8.2

dnes 04:22 | Nová verze

Byla vydána verze 8.2 open source virtualizační platformy Proxmox VE (Proxmox Virtual Environment, Wikipedie) založené na Debianu. Přehled novinek v poznámkách k vydání a v informačním videu. Zdůrazněn je průvodce migrací hostů z VMware ESXi do Proxmoxu.

Ladislav Hagara | Komentářů: 0

R 4.4.0 (Puppy Cup)

dnes 04:11 | Nová verze

R (Wikipedie), programovací jazyk a prostředí určené pro statistickou analýzu dat a jejich grafické zobrazení, bylo vydáno ve verzi 4.4.0. Její kódové jméno je Puppy Cup.

Ladislav Hagara | Komentářů: 0

IBM kupuje společnost HashiCorp za 6,4 miliardy dolarů

včera 22:44 | IT novinky

IBM kupuje společnost HashiCorp (Terraform, Packer, Vault, Boundary, Consul, Nomad, Waypoint, Vagrant, …) za 6,4 miliardy dolarů, tj. 35 dolarů za akcii.

Ladislav Hagara | Komentářů: 6

TrueNAS SCALE 24.04 “Dragonfish”

včera 15:55 | Nová verze

Byl vydán TrueNAS SCALE 24.04 “Dragonfish”. Přehled novinek této open source storage platformy postavené na Debianu v poznámkách k vydání.

Ladislav Hagara | Komentářů: 0

Raspberry Pi Compute Module 4S s 2 GB, 4 GB a 8 GB paměti

včera 13:44 | IT novinky

Oznámeny byly nové Raspberry Pi Compute Module 4S. Vedle původní 1 GB varianty jsou nově k dispozici také varianty s 2 GB, 4 GB a 8 GB paměti. Compute Modules 4S mají na rozdíl od Compute Module 4 tvar a velikost Compute Module 3+ a předchozích. Lze tak provést snadný upgrade.

Ladislav Hagara | Komentářů: 0

nginx 1.26.0

včera 04:44 | Nová verze

Po roce vývoje od vydání verze 1.24.0 byla vydána nová stabilní verze 1.26.0 webového serveru a reverzní proxy nginx (Wikipedie). Nová verze přináší řadu novinek. Podrobný přehled v souboru CHANGES-1.26.

Ladislav Hagara | Komentářů: 0

Tails 6.2

včera 04:33 | Nová verze

Byla vydána nová verze 6.2 živé linuxové distribuce Tails (The Amnesic Incognito Live System), jež klade důraz na ochranu soukromí uživatelů a anonymitu. Přehled změn v příslušném seznamu. Tor Browser byl povýšen na verzi 13.0.14.

Ladislav Hagara | Komentářů: 0

Electron 30.0.0

včera 04:22 | Nová verze

Byla vydána nová verze 30.0.0 frameworku pro vývoj multiplatformních desktopových aplikací pomocí JavaScriptu, HTML a CSS Electron (Wikipedie, GitHub). Chromium bylo aktualizováno na verzi 124.0.6367.49, V8 na verzi 12.4 a Node.js na verzi 20.11.1. Electron byl původně vyvíjen pro editor Atom pod názvem Atom Shell. Dnes je na Electronu postavena celá řada dalších aplikací.

Ladislav Hagara | Komentářů: 2

QEMU 9.0.0

včera 04:11 | Nová verze

Byla vydána nová verze 9.0.0 otevřeného emulátoru procesorů a virtualizačního nástroje QEMU (Wikipedie). Přispělo 220 vývojářů. Provedeno bylo více než 2 700 commitů. Přehled úprav a nových vlastností v seznamu změn.

Ladislav Hagara | Komentářů: 0

Centrum | Napsat | Starší

navrhněte » Anketa

KDE Plasma 6

už používám (72%)

čekám, až se dostane do mé distibuce (9%)

čekám na pozdější vydání v řadě (2%)

preferuji jiné desktopové prostředí (17%)

Celkem 739 hlasů

Komentářů: 4, poslední 6.4. 15:51

Rozcestník

AbcLinuxu

HDmag.cz

Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

6.5.2009 09:47 Monty
Rozbalit Rozbalit vše CentOS 5.2 + memory upgrade => udev timeout

Ahoj vespolek,

mám server s CentOS 5.2. Původně se 4GB. Po rozšíření paměti na 8GB počítač najednou strašně zlenivěl, udev mu místo cca. minuty trvá i přes 10 minut (někdy timeoutuje). Pro jistotu jsem zkusil přidat stejné paměti jako tam už byly a i jiné - u obou druhů to má za následek pomalost

uname -a

Linux nana2 2.6.18-53.el5 #1 SMP Mon Nov 12 02:14:55 EST 2007 x86_64 x86_64 x86_64 GNU/Linux

Přitom top normálně úkáže 8GB, paměť jsem testoval pomocí memtesteru a ten žádnou chybu nehlásí. Netušíte někdo čím by to mohlo být?

cat /var/log/messages

May 3 04:02:03 nana2 syslogd 1.4.1: restart. May 6 09:24:13 nana2 shutdown[9273]: shutting down for system halt May 6 09:24:13 nana2 init: Switching to runlevel: 0 May 6 09:24:21 nana2 xinetd[2819]: Exiting... May 6 09:24:21 nana2 auditd[2496]: The audit daemon is exiting. May 6 09:24:21 nana2 kernel: audit(1241594661.992:6221): audit_pid=0 old=2496 by auid=4294967295 May 6 09:24:22 nana2 kernel: Kernel logging (proc) stopped. May 6 09:24:22 nana2 kernel: Kernel log daemon terminating. May 6 09:24:23 nana2 exiting on signal 15 May 6 10:02:32 nana2 syslogd 1.4.1: restart. May 6 10:02:32 nana2 kernel: klogd 1.4.1, log source = /proc/kmsg started. May 6 10:02:32 nana2 kernel: Linux version 2.6.18-53.el5 (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Mon Nov 12 02:14:55 EST 2007 May 6 10:02:32 nana2 kernel: Command line: ro root=LABEL=/ May 6 10:02:32 nana2 kernel: BIOS-provided physical RAM map: May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000000100000 - 00000000cfa17000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfa17000 - 00000000cfa19000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfa19000 - 00000000cfafe000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfafe000 - 00000000cfbe5000 (ACPI NVS) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbe5000 - 00000000cfbe9000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbe9000 - 00000000cfbf3000 (ACPI data) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbf3000 - 00000000cfbf4000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbf4000 - 00000000cfbff000 (ACPI data) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbff000 - 00000000cfc00000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000100000000 - 000000022c000000 (usable) May 6 10:02:32 nana2 kernel: DMI 2.4 present. May 6 10:02:33 nana2 kernel: No NUMA configuration found May 6 10:02:33 nana2 kernel: Faking a node at 0000000000000000-000000022c000000 May 6 10:02:33 nana2 kernel: Bootmem setup node 0 0000000000000000-000000022c000000 May 6 10:02:33 nana2 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range May 6 10:02:33 nana2 kernel: disabling kdump May 6 10:02:33 nana2 kernel: ACPI: PM-Timer IO Port: 0x408 May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 6 10:02:33 nana2 kernel: Processor #0 6:15 APIC version 20 May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 6 10:02:33 nana2 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 6 10:02:33 nana2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 6 10:02:33 nana2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 May 6 10:02:33 nana2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 6 10:02:33 nana2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 6 10:02:33 nana2 kernel: Setting APIC routing to physical flat May 6 10:02:33 nana2 kernel: Using ACPI (MADT) for SMP configuration information May 6 10:02:33 nana2 kernel: Nosave address range: 000000000009e000 - 000000000009f000 May 6 10:02:33 nana2 kernel: Nosave address range: 000000000009f000 - 00000000000a0000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000000a0000 - 00000000000e0000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000000e0000 - 0000000000100000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfa17000 - 00000000cfa19000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfafe000 - 00000000cfbe5000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfbe9000 - 00000000cfbf3000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfbf4000 - 00000000cfbff000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfc00000 - 00000000d0000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000d0000000 - 00000000f0000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000f0000000 - 00000000f8000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000f8000000 - 00000000fff00000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000fff00000 - 0000000100000000 May 6 10:02:33 nana2 kernel: Allocating PCI resources starting at d2000000 (gap: d0000000:20000000) May 6 10:02:33 nana2 kernel: SMP: Allowing 4 CPUs, 3 hotplug CPUs May 6 10:02:33 nana2 kernel: Built 1 zonelists. Total pages: 2047016 May 6 10:02:33 nana2 kernel: Kernel command line: ro root=LABEL=/ May 6 10:02:33 nana2 kernel: Initializing CPU#0 May 6 10:02:33 nana2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) May 6 10:02:33 nana2 kernel: Console: colour VGA+ 80x25 May 6 10:02:33 nana2 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) May 6 10:02:33 nana2 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) May 6 10:02:33 nana2 kernel: Checking aperture... May 6 10:02:33 nana2 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 6 10:02:33 nana2 kernel: Placing software IO TLB between 0x1c3b000 - 0x5c3b000 May 6 10:02:33 nana2 kernel: Memory: 8105980k/9109504k available (2434k kernel code, 211588k reserved, 1235k data, 192k init) May 6 10:02:33 nana2 kernel: Calibrating delay using timer specific routine.. 4802.06 BogoMIPS (lpj=2401033) May 6 10:02:33 nana2 kernel: Security Framework v1.0.0 initialized May 6 10:02:33 nana2 kernel: SELinux: Initializing. May 6 10:02:33 nana2 kernel: selinux_register_security: Registering secondary module capability May 6 10:02:33 nana2 kernel: Capability LSM initialized as secondary May 6 10:02:33 nana2 kernel: Mount-cache hash table entries: 256 May 6 10:02:33 nana2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K May 6 10:02:33 nana2 kernel: CPU: L2 cache: 4096K May 6 10:02:33 nana2 kernel: using mwait in idle threads. May 6 10:02:33 nana2 kernel: CPU: Physical Processor ID: 0 May 6 10:02:33 nana2 kernel: CPU: Processor Core ID: 0 May 6 10:02:33 nana2 kernel: CPU0: Thermal monitoring enabled (TM2) May 6 10:02:33 nana2 kernel: SMP alternatives: switching to UP code May 6 10:02:33 nana2 kernel: ACPI: Core revision 20060707 May 6 10:02:33 nana2 kernel: Using local APIC timer interrupts. May 6 10:02:33 nana2 kernel: result 16667479 May 6 10:02:33 nana2 kernel: Detected 16.667 MHz APIC timer. May 6 10:02:33 nana2 kernel: Brought up 1 CPUs May 6 10:02:33 nana2 kernel: testing NMI watchdog ... OK. May 6 10:02:33 nana2 kernel: time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. May 6 10:02:33 nana2 kernel: time.c: Detected 2400.116 MHz processor. May 6 10:02:33 nana2 kernel: checking if image is initramfs... it is May 6 10:02:33 nana2 kernel: Freeing initrd memory: 2389k freed May 6 10:02:33 nana2 kernel: NET: Registered protocol family 16 May 6 10:02:33 nana2 kernel: ACPI: bus type pci registered May 6 10:02:33 nana2 kernel: PCI: Using MMCONFIG at f0000000 May 6 10:02:33 nana2 kernel: ACPI: Interpreter enabled May 6 10:02:33 nana2 kernel: ACPI: Using IOAPIC for interrupt routing May 6 10:02:33 nana2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) May 6 10:02:33 nana2 kernel: PCI: Transparent bridge - 0000:00:1e.0 May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay May 6 10:02:34 nana2 kernel: pnp: PnP ACPI init May 6 10:02:34 nana2 kernel: pnp: PnP ACPI: found 10 devices May 6 10:02:34 nana2 kernel: usbcore: registered new driver usbfs May 6 10:02:34 nana2 kernel: usbcore: registered new driver hub May 6 10:02:34 nana2 kernel: PCI: Using ACPI for IRQ routing May 6 10:02:34 nana2 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report May 6 10:02:34 nana2 kernel: NetLabel: Initializing May 6 10:02:34 nana2 kernel: NetLabel: domain hash size = 128 May 6 10:02:34 nana2 kernel: NetLabel: protocols = UNLABELED CIPSOv4 May 6 10:02:34 nana2 kernel: NetLabel: unlabeled traffic allowed by default May 6 10:02:34 nana2 kernel: PCI-GART: No AMD northbridge found. May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x500-0x53f has been reserved May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x400-0x47f could not be reserved May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x680-0x6ff has been reserved May 6 10:02:34 nana2 kernel: PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:01.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e0000000-e1ffffff May 6 10:02:34 nana2 kernel: PREFETCH window: d0000000-dfffffff May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2300000-e23fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.1 May 6 10:02:34 nana2 kernel: IO window: 1000-1fff May 6 10:02:34 nana2 kernel: MEM window: e2100000-e21fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.2 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2400000-e24fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.3 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2500000-e25fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.4 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2600000-e26fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1e.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2000000-e20fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:34 nana2 kernel: GSI 18 sharing vector 0xB9 and IRQ 18 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 185 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 19 sharing vector 0xC1 and IRQ 19 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.3 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 20 sharing vector 0xC9 and IRQ 20 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 201 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.4 (0000 -> 0002) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:34 nana2 kernel: NET: Registered protocol family 2 May 6 10:02:34 nana2 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) May 6 10:02:34 nana2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) May 6 10:02:34 nana2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 6 10:02:34 nana2 kernel: TCP: Hash tables configured (established 262144 bind 65536) May 6 10:02:34 nana2 kernel: TCP reno registered May 6 10:02:34 nana2 kernel: audit: initializing netlink socket (disabled) May 6 10:02:34 nana2 kernel: audit(1241603400.881:1): initialized May 6 10:02:34 nana2 kernel: Total HugeTLB memory allocated, 0 May 6 10:02:34 nana2 kernel: VFS: Disk quotas dquot_6.5.1 May 6 10:02:34 nana2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 6 10:02:34 nana2 kernel: Initializing Cryptographic API May 6 10:02:34 nana2 kernel: ksign: Installing public key data May 6 10:02:34 nana2 kernel: Loading keyring May 6 10:02:34 nana2 kernel: - Added public key FA719CFD42DF8150 May 6 10:02:34 nana2 kernel: - User ID: CentOS (Kernel Module GPG key) May 6 10:02:34 nana2 kernel: io scheduler noop registered May 6 10:02:34 nana2 kernel: io scheduler anticipatory registered May 6 10:02:34 nana2 kernel: io scheduler deadline registered May 6 10:02:34 nana2 kernel: io scheduler cfq registered (default) May 6 10:02:34 nana2 kernel: assign_interrupt_mode Found MSI capability May 6 10:02:34 nana2 last message repeated 5 times May 6 10:02:34 nana2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 6 10:02:34 nana2 kernel: ACPI: Processor [CPU0] (supports 8 throttling states) May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x2 May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x3 May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x4 May 6 10:02:34 nana2 kernel: Real Time Clock Driver v1.12ac May 6 10:02:34 nana2 kernel: Non-volatile memory driver v1.2 May 6 10:02:34 nana2 kernel: Linux agpgart interface v0.101 (c) Dave Jones May 6 10:02:34 nana2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled May 6 10:02:34 nana2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A May 6 10:02:34 nana2 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize May 6 10:02:34 nana2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 May 6 10:02:34 nana2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx May 6 10:02:34 nana2 kernel: ide-floppy driver 0.99.newide May 6 10:02:34 nana2 kernel: usbcore: registered new driver hiddev May 6 10:02:34 nana2 kernel: usbcore: registered new driver usbhid May 6 10:02:34 nana2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver May 6 10:02:34 nana2 kernel: PNP: No PS/2 controller found. Probing ports directly. May 6 10:02:34 nana2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 May 6 10:02:34 nana2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 May 6 10:02:34 nana2 kernel: mice: PS/2 mouse device common for all mice May 6 10:02:34 nana2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 May 6 10:02:34 nana2 kernel: md: bitmap version 4.39 May 6 10:02:34 nana2 kernel: TCP bic registered May 6 10:02:34 nana2 kernel: Initializing IPsec netlink socket May 6 10:02:34 nana2 kernel: NET: Registered protocol family 1 May 6 10:02:34 nana2 kernel: NET: Registered protocol family 17 May 6 10:02:35 nana2 kernel: ACPI: (supports S0 S1 S3 S4 S5) May 6 10:02:35 nana2 kernel: Freeing unused kernel memory: 192k freed May 6 10:02:35 nana2 kernel: Write protecting the kernel read-only data: 468k May 6 10:02:35 nana2 kernel: USB Universal Host Controller Interface driver v3.0 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: irq 193, io base 0x000020e0 May 6 10:02:35 nana2 kernel: usb usb1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 1-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 1-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: GSI 21 sharing vector 0x4A and IRQ 21 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 74 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: irq 74, io base 0x000020c0 May 6 10:02:35 nana2 kernel: usb usb2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 2-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 2-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: irq 177, io base 0x000020a0 May 6 10:02:35 nana2 kernel: usb usb3: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 3-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 3-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2 May 6 10:02:35 nana2 kernel: GSI 22 sharing vector 0x52 and IRQ 22 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 82 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: irq 82, io base 0x00002080 May 6 10:02:35 nana2 kernel: usb usb4: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 4-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 4-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: irq 201, io base 0x00002060 May 6 10:02:35 nana2 kernel: usb usb5: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: usb 1-1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 5-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 5-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input0 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Keyboard [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input1 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Mouse [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: irq 193, io base 0x00002040 May 6 10:02:35 nana2 kernel: usb usb6: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 6-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 6-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: usb 4-2: new low speed USB device using uhci_hcd and address 2 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: debug port 1 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: irq 177, io mem 0xe2225c00 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 6 10:02:35 nana2 kernel: usb usb7: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 7-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 7-0:1.0: 6 ports detected May 6 10:02:35 nana2 kernel: usb 4-2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input2 May 6 10:02:35 nana2 kernel: input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 82 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input3 May 6 10:02:35 nana2 kernel: input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: debug port 1 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: irq 82, io mem 0xe2225800 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 6 10:02:35 nana2 kernel: usb usb8: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 8-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 8-0:1.0: 6 ports detected May 6 10:02:35 nana2 kernel: usb 1-1: USB disconnect, address 2 May 6 10:02:35 nana2 kernel: usb 1-1: new low speed USB device using uhci_hcd and address 3 May 6 10:02:35 nana2 kernel: usb 1-1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: SCSI subsystem initialized May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input4 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Keyboard [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input5 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Mouse [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 74 May 6 10:02:35 nana2 kernel: usb 4-2: USB disconnect, address 2 May 6 10:02:35 nana2 kernel: usb 4-2: new low speed USB device using uhci_hcd and address 3 May 6 10:02:35 nana2 kernel: usb 4-2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input6 May 6 10:02:35 nana2 kernel: input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input7 May 6 10:02:35 nana2 kernel: input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode May 6 10:02:35 nana2 kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp pio slum part May 6 10:02:35 nana2 kernel: scsi0 : ahci May 6 10:02:35 nana2 kernel: scsi1 : ahci May 6 10:02:35 nana2 kernel: scsi2 : ahci May 6 10:02:35 nana2 kernel: scsi3 : ahci May 6 10:02:35 nana2 kernel: scsi4 : ahci May 6 10:02:35 nana2 kernel: scsi5 : ahci May 6 10:02:35 nana2 kernel: ata1: SATA max UDMA/133 cmd 0xffffc2000002c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata2: SATA max UDMA/133 cmd 0xffffc2000002c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata3: SATA max UDMA/133 cmd 0xffffc2000002c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata4: SATA max UDMA/133 cmd 0xffffc2000002c280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata5: SATA max UDMA/133 cmd 0xffffc2000002c300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata6: SATA max UDMA/133 cmd 0xffffc2000002c380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 6 10:02:35 nana2 kernel: ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 May 6 10:02:35 nana2 kernel: ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) May 6 10:02:35 nana2 kernel: ata1.00: configured for UDMA/133 May 6 10:02:35 nana2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 6 10:02:35 nana2 kernel: ata2.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 May 6 10:02:35 nana2 kernel: ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) May 6 10:02:35 nana2 kernel: ata2.00: configured for UDMA/133 May 6 10:02:35 nana2 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata4: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata5: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata6: SATA link down (SStatus 0 SControl 300) May 6 10:02:36 nana2 kernel: Vendor: ATA Model: ST3250310AS Rev: 3.AA May 6 10:02:36 nana2 kernel: Type: Direct-Access ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sda: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sda: drive cache: write back May 6 10:02:36 nana2 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sda: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sda: drive cache: write back May 6 10:02:36 nana2 kernel: sda: sda1 sda2 sda3 May 6 10:02:36 nana2 kernel: sd 0:0:0:0: Attached scsi disk sda May 6 10:02:36 nana2 kernel: Vendor: ATA Model: ST3250310AS Rev: 3.AA May 6 10:02:36 nana2 kernel: Type: Direct-Access ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sdb: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sdb: drive cache: write back May 6 10:02:36 nana2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sdb: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sdb: drive cache: write back May 6 10:02:36 nana2 kernel: sdb: sdb1 May 6 10:02:36 nana2 kernel: sd 1:0:0:0: Attached scsi disk sdb May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:36 nana2 kernel: scsi6 : pata_marvell May 6 10:02:36 nana2 kernel: scsi7 : pata_marvell May 6 10:02:36 nana2 kernel: ata7: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 177 May 6 10:02:36 nana2 kernel: ata8: DUMMY May 6 10:02:36 nana2 kernel: BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 May 6 10:02:36 nana2 kernel: ata7.00: ATAPI, max UDMA/66 May 6 10:02:36 nana2 kernel: ata7.00: configured for UDMA/66 May 6 10:02:36 nana2 kernel: Vendor: ASUS Model: DRW-2014L1 Rev: 1.00 May 6 10:02:36 nana2 kernel: Type: CD-ROM ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: SELinux: Disabled at runtime. May 6 10:02:36 nana2 kernel: audit(1241603413.647:2): selinux=0 auid=4294967295 May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:36 nana2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 May 6 10:02:36 nana2 kernel: input: PC Speaker as /class/input/input8 May 6 10:02:36 nana2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 6 10:02:36 nana2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 May 6 10:02:36 nana2 kernel: scsi 6:0:0:0: Attached scsi generic sg2 type 5 May 6 10:02:36 nana2 kernel: Intel(R) PRO/1000 Network Driver - 0.2.0 May 6 10:02:36 nana2 kernel: Copyright (c) 1999-2007 Intel Corporation. May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 185 May 6 10:02:36 nana2 kernel: pci0000:00: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:2a:f3:cf May 6 10:02:36 nana2 kernel: pci0000:00: eth0: Intel(R) PRO/1000 Network Connection May 6 10:02:36 nana2 kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 6 10:02:36 nana2 kernel: Uniform CD-ROM driver Revision: 3.20 May 6 10:02:36 nana2 kernel: GSI 23 sharing vector 0x62 and IRQ 23 May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 98 May 6 10:02:36 nana2 kernel: hda-intel: no codecs found! May 6 10:02:36 nana2 kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 6 10:02:36 nana2 kernel: FDC 0 is a National Semiconductor PC87306 May 6 10:02:36 nana2 kernel: lp: driver loaded but no devices found May 6 10:02:36 nana2 kernel: ACPI: Power Button (FF) [PWRF] May 6 10:02:36 nana2 kernel: ACPI: Sleep Button (CM) [SLPB] May 6 10:02:36 nana2 kernel: ibm_acpi: ec object not found May 6 10:02:36 nana2 kernel: md: Autodetecting RAID arrays. May 6 10:02:36 nana2 kernel: md: autorun ... May 6 10:02:36 nana2 kernel: md: ... autorun DONE. May 6 10:02:36 nana2 kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com May 6 10:02:36 nana2 kernel: device-mapper: multipath: version 1.0.5 loaded May 6 10:02:36 nana2 kernel: EXT3 FS on sda1, internal journal May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3 FS on sda3, internal journal May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3 FS on sdb1, internal journal May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: loop: loaded (max 8 devices) May 6 10:02:36 nana2 kernel: Adding 12586916k swap on /dev/sda2. Priority:-1 extents:1 across:12586916k May 6 10:02:36 nana2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> May 6 10:02:36 nana2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 6 10:02:36 nana2 kernel: Netfilter messages via NETLINK v0.30. May 6 10:02:36 nana2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack May 6 10:02:36 nana2 kernel: pci0000:00: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX May 6 10:02:36 nana2 kernel: pci0000:00: eth0: 10/100 speed: disabling TSO May 6 10:04:24 nana2 kernel: vmmon: module license 'unspecified' taints kernel. May 6 10:06:00 nana2 kernel: bridge-eth0: already up May 6 10:06:03 nana2 vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0 May 6 10:06:03 nana2 vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. May 6 10:06:03 nana2 vmnet-dhcpd: All rights reserved. May 6 10:06:03 nana2 vmnet-dhcpd: May 6 10:06:03 nana2 vmnet-dhcpd: Please contribute if you find this software useful. May 6 10:06:03 nana2 vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html May 6 10:06:03 nana2 vmnet-dhcpd: May 6 10:06:03 nana2 vmnet-dhcpd: Configured subnet: 192.168.217.0 May 6 10:06:03 nana2 vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.217.254 May 6 10:06:04 nana2 vmnet-dhcpd: Recving on VNet/vmnet1/192.168.217.0 May 6 10:06:04 nana2 vmnet-dhcpd: Sending on VNet/vmnet1/192.168.217.0 May 6 10:06:10 nana2 vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0 May 6 10:06:10 nana2 vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. May 6 10:06:10 nana2 vmnet-dhcpd: All rights reserved. May 6 10:06:10 nana2 vmnet-dhcpd: May 6 10:06:10 nana2 vmnet-dhcpd: Please contribute if you find this software useful. May 6 10:06:10 nana2 vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html May 6 10:06:10 nana2 vmnet-dhcpd: May 6 10:06:10 nana2 vmnet-dhcpd: Configured subnet: 172.16.192.0 May 6 10:06:10 nana2 vmnet-dhcpd: Setting vmnet-dhcp IP address: 172.16.192.254 May 6 10:06:10 nana2 vmnet-dhcpd: Recving on VNet/vmnet8/172.16.192.0 May 6 10:06:10 nana2 vmnet-dhcpd: Sending on VNet/vmnet8/172.16.192.0 May 6 10:06:46 nana2 automount[2548]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master May 6 10:07:02 nana2 xinetd[2609]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. May 6 10:07:02 nana2 xinetd[2609]: Started working: 2 available services May 6 10:07:03 nana2 gpm[2624]: *** info [startup.c(95)]: May 6 10:07:03 nana2 gpm[2624]: Started gpm successfully. Entered daemon mode.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Píšeme jinde

ISSN 1214-1267 www.czech-server.cz

Redakce | Inzerce | Podmínky použití | Osobní údaje

Vaše jméno
Váš email
Typ požadavku

Slovní popis