Administrace komentářů

jeste nechapu jak to pozna, ze tam je ta, ci ona pcmcia karta -- ktera se vyndala? A take nevim, kam bych mel tu remove akci napsat. Nasel jsem jeste soubor pci.rc -- co ten dela?

#!/bin/sh
# vim: syntax=sh
#
# pci.rc        mostly to recover lost boot-time pci hotplug events
#
# $Id: pci.rc,v 1.7 2003/06/06 18:27:23 dbrownell Exp $
#

PATH=/sbin:/bin:/usr/sbin:/usr/bin

cd /etc/hotplug

. hotplug.functions

sys_file ()
{
    cut -f2 -dx $DEVICE/$1
}

pci_boot_events ()
{
    #
    # FIXME on 2.5, /sys/bus/pci/devices gives some of this
    # information, and more can be gotten with 'lspci'.
    # don't expect pcimodules to exist!!
    #
    LISTER=`type -p pcimodules`
    if [ "$LISTER" = "" -o ! -f /proc/bus/pci/devices -o ! -x pci.agent ]; then
            echo $"** can't synthesize pci hotplug events"
            return 1
    fi

   # make sure the pci agent will run
    ACTION=add
    PCI_CLASS=0
    PCI_ID=0:0
    PCI_SLOT=0:0.0
    PCI_SUBSYS_ID=0:0
    export ACTION PCI_CLASS PCI_ID PCI_SLOT PCI_SUBSYS_ID

    case $KERNEL in
        2.5*|2.6*)
            for DEVICE in /sys/bus/pci/devices/*; do
                PCI_CLASS=`sys_file class`
                PCI_ID=`sys_file vendor`:`sys_file device`
                PCI_SLOT=`echo $DEVICE | cut -d: -f2-`
                PCI_SUBSYS_ID=`sys_file subsystem_vendor`:`sys_file subsystem_device`
                /sbin/hotplug pci
            done
            ;;
        2.4*)
        # these notifications will be handled by pcimodules
        for BUS in `cd /proc/bus/pci;find * -type d -print`; do
            for SLOT_FUNC in `cd /proc/bus/pci/$BUS; echo *`; do
                PCI_SLOT=$BUS:$SLOT_FUNC
                : hotplug pci for $PCI_SLOT
                /sbin/hotplug pci
            done
        done
        ;;
    esac
}

# See how we were called.
case "$1" in
  start)
        pci_boot_events
        ;;
  stop)
        # echo $"pci stop -- ignored"
        ;;
  status)
        echo $"PCI Status for kernel: "  `uname -srm`
        echo ''


        if [ -f /proc/bus/pci/devices ]; then
            COUNT=`ls /proc/bus/pci | wc -l`
            if [ $COUNT -gt 1 ]; then
                COUNT=`expr $COUNT - 1`
                echo $"PCI up; bus count is $COUNT"
                if [ -x /sbin/lspci ]; then
                    /sbin/lspci
                fi
            else
                echo $"no PCI busses?"
            fi
            echo ''
        else
            echo $"no PCI /proc support?"
        fi
        echo ''

        ;;
  restart)
        # always invoke by absolute path, else PATH=$PATH:
        $0 stop && $0 start
        ;;
  *)
        echo $"Usage: $0 {start|stop|status|restart}"
        exit 1
esac

na co je /etc/pcmcia/config? nasel jsem tam zaznam o sve karte:

card "Xircom R2BEM56G-100 CardBus 10/100 Ethernet + 56K Modem" version "Xircom", "*", "R2BEM56G" bind "tulip_cb" to 0, "serial_cb" to 1

na co tam je?

jeste jsem zjistil, ze kdyz vyndam wifi kartu(moduly orinoco_cs,orinoco) tak se moduly z jadra automaticky odstrani, ale kdyz vyndam tu xircom, tak tam zustanou. A take me vadi, ze kdyz vyndam wifi kartu a zastrcim tu xircom, tak musim znovu nastavit pomoci ifconfig sit. Ale kdyz vyndam wifi a znovu ji zandam, tak sit se sama zase nahodi.

JUR