SM718 Rev 2.00

Ovladač:

v jádře

Technické parametry

Pouzity chipset: YAMAHA YMF7193-S

Vlastnosti teto zvukovky
• 16-bit ISA-PnP karta
• kompatibilni se standardy SB Pro a WSS
• YAMAHA opl3 synteza
• moznost rozsireni na wavetable syntezu
• vstupy/vystupy: (micro) (line-in) (speaker/line-out) [MIDI/game]
• IDE rozhrani pro CD

Identifikace pod Linuxem

/proc/isapnp:

Card 1 'YMH0020:OPL3-SA3 Sound Board' PnP version 1.0
  Logical device 0 'YMH0021:Unknown'
    Device is active
    Active port 0x240,0xe80,0x388,0x300,0x100
    Active IRQ 5 [0x2]
    Active DMA 1,3
    Resources 0
      Priority preferred
      Port 0x220-0x220, align 0xf, size 0x10, 16-bit address decoding
      Port 0x530-0x530, align 0x7, size 0x8, 16-bit address decoding
      Port 0x388-0x388, align 0x3, size 0x4, 16-bit address decoding
      Port 0x330-0x330, align 0x1, size 0x2, 16-bit address decoding
      Port 0x370-0x370, align 0x1, size 0x2, 16-bit address decoding
      IRQ 5 High-Edge
      DMA 0 8-bit byte-count type-A
      DMA 1 8-bit byte-count type-A
      Alternate resources 0:1
        Priority acceptable
        Port 0x240-0x240, align 0xf, size 0x10, 16-bit address decoding
        Port 0xe80-0xe80, align 0x7, size 0x8, 16-bit address decoding
        Port 0x388-0x388, align 0x7, size 0x4, 16-bit address decoding
        Port 0x300-0x300, align 0x1, size 0x2, 16-bit address decoding
        Port 0x100-0xffe, align 0x1, size 0x2, 16-bit address decoding
        IRQ 5,7,2/9,10,11 High-Edge
        DMA 0,1,3 8-bit byte-count type-A
        DMA 0,1,3 8-bit byte-count type-A
      Alternate resources 0:2
        Priority functional
        Port 0x220-0x280, align 0xf, size 0x10, 16-bit address decoding
        Port 0x530-0xf48, align 0x7, size 0x8, 16-bit address decoding
        Port 0x388-0x3f8, align 0x7, size 0x4, 16-bit address decoding
        Port 0x300-0x334, align 0x1, size 0x2, 16-bit address decoding
        Port 0x100-0xffe, align 0x1, size 0x2, 16-bit address decoding
        IRQ 3,5,7,2/9,10,11 High-Edge
        DMA 0,1,3 8-bit byte-count type-A
        DMA 0,1,3 8-bit byte-count type-A
  Logical device 1 'YMH0022:Unknown'
    Compatible device PNPb02f
    Device is not active
    Active DMA 0,0
    Resources 0
      Priority preferred
      Port 0x201-0x201, align 0x0, size 0x1, 16-bit address decoding
      Alternate resources 0:1
        Priority functional
        Port 0x201-0x211, align 0xf, size 0x1, 16-bit address decoding
  Logical device 2 'YMH002f:Unknown'
    Device is not active
    Active DMA 0,0
    Resources 0
      Priority preferred
      Port 0x100-0xff8, align 0x7, size 0x8, 16-bit address decoding
  Logical device 3 'YMH0024:Unknown'
    Compatible device PNP0600
    Device is not active
    Active DMA 0,0
    Resources 0
      Priority preferred
      Port 0x1e0-0x1e0, align 0x7, size 0x8, 16-bit address decoding
      Port 0x3e6-0x3e6, align 0x0, size 0x1, 16-bit address decoding
      IRQ 11 High-Edge
      Alternate resources 0:1
        Priority functional
        Port 0x100-0x1f8, align 0x7, size 0x8, 16-bit address decoding
        Port 0x306-0x3f6, align 0x7, size 0x1, 16-bit address decoding
        IRQ 3,5,7,2/9,10,11 High-Edge

dmesg:

ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
opl3sa2: Activated ISA PnP card 0 (active=1)
opl3sa2: chipset version = 0x4
opl3sa2: Found OPL3-SA3 (YMF715E or YMF719E)
          at 0x100
          at 0xe84 irq 5 dma 1,3
          at 0x300 irq 5
opl3sa2: 1 PnP card(s) found.

Postup zprovoznění pod Linuxem

Hardwarova cast
1. Karta je PnP, presto je na ni jumper JP1 a JP2: OUTPUT-SPEAKER/LINE. Doporucuji nastavit ho spravne, nebot pri volbe SPEAKER a aktivnich beden zvukovka muze sumet (plati pro vsechny zvukovky s vystupnimi zesilovaci).
2. Jumpery JP3 a JP4 mohou byt pripajeny natvrdo na volbu 3D OFF. Nenamahejte se s jejich prepajovanim, protoze na karte tim padem nebude ani prislusny svab (plus hafo dalsich veci kolem), starajici se o 3D.

Softwarova cast
1. Karta je PnP - BIOS nebo kernel kartu na nejaka IRQ nastavi. Tato IRQ ale nejsou sdilena s PCI! To je dobre si uvedomit, rovnez durazne nedoporucuji rezervovat pro kartu vlastni IRQ volbou Legacy ISA v BIOSu. Tim dosahneme akorat toho, ze tyto IRQ zustanou neobsazena a zbytek systemu se bude chovat velmi zajimave.
2. Je dobre v novejsich BIOSech vypnout volbu

     PnP OS: No
   

   Muzeme se tim padem dozvedet z tabluky BIOSu pred bootem na cem je karta povesena a tak dale.
3. V Linuxovem jadre bychom meli mit ovladac pro karty OPL3SA2 a v radach 2.4 tez PnP ISA (oba bud jako moduly nebo v jadre).
4. Pokud mame oba ovladace v jadre, melo by jadro detekovat zvukovku jiz pri startu. Pokud mame modularni jadro, vyzkousime zavest rucne ovladac zvukovky:

     modprobe -v opl3sa2
   

5. Pokud vse chodi jak ma, pridame natahovani modulu do startovacich script, popr. upravime /etc/modules.conf napr. nasledovne:

     # Zvukova karta SM718 (?) - YMF7193-S
     alias sound-slot-0 opl3sa2
     options opl3sa2 io=0x370 mss_io=0x530 mpu_io=0x330 irq=5 dma=1 dma2=3
     options opl3 io=0x388
   

6. Pokud je neco blbe, popr. k dalsimu studiu doporucuji si precist dokumentaci v jadre: Documentation/sound/OPL3-SA2.
7. Pokud nemame PnP ISA modul, muzeme pouzit nastroje isapnp. Potom kartu inicializujeme v startovacich scriptech.
8. Pokud chceme pouzivat IDE, staci ho nastavit na karte nastrojem isapnp a jadru pri startu pomoci parametru napr.:

     ide3=0x168,0x36e,10
   

   rici, ze ma k dispozci dalsi IDE (spolehlive uchozeno i na 386 s 4xdisk 1xCD

Poznámka

Testovano v jadre 2.4.7. S jadrem 2.0 karta chodi budto jako emulace SB Pro/WSS nebo jako cs4232.

Dokument vytvořil: David Jež, 26.9.2001 09:36 | Zobrazeno: 1581×