Man Yue Mo z GitHub Security Lab se podrobně rozepsal o již opravené zranitelnosti CVE-2023-6241 v Arm Mali GPU umožňující získání roota na telefonu Pixel 8 s povoleným MTE (Memory Tagging Extension).
V San José probíhá vývojářská konference NVIDIA GTC 2024. CEO společnosti NVIDIA Jensen Huang měl dvouhodinovou keynote, ve které představil celou řadu novinek: NVIDIA Blackwell platform, NVIDIA NIM microservices, NVIDIA Omniverse Cloud APIs, Project GR00T, …
Byly zpracovány a na YouTube zveřejněny videozáznamy jednotlivých přednášek z letošního Installfestu.
Od 21. do 23. března proběhnou Arduino Days 2024. Sledovat bude možné oficiální streamy. Zúčastnit se lze i lokálních akcí. V Česku jsou aktuálně registrovány dvě: v Praze na Matfyzu a v Poličce v městské knihovně.
Letošní ročník konference LinuxDays se uskuteční o víkendu 12. a 13. října, opět se potkáme v pražských Dejvicích na FIT ČVUT. Také během letošního ročníku nás budou čekat desítky přednášek, workshopy, stánky a spousta doprovodného programu. Aktuální dění můžete sledovat na Twitteru, Facebooku nebo na Mastodonu, přidat se můžete také do telegramové diskusní skupiny.
Byla vydána nová major verze 2.0.0 a krátce na to opravné verze 2.0.1 open source online editoru Etherpad (Wikipedie) umožňujícího společné úpravy v reálném čase.
Matematický software GNU Octave byl vydán ve verzi 9.1.0. Podrobnosti v poznámkách k vydání. Nově je preferovaný grafický backend Qt a preferovaná verze Qt 6. V tomto vydání byly přepracovány funkce pro převod čísel z desítkové soustavy. Jako obvykle jsou zahrnuta také výkonnostní vylepšení a zlepšení kompatibility s Matlabem.
Společnost PINE64 stojící za telefony PinePhone nebo notebooky Pinebook publikovala na svém blogu březnový souhrn novinek. Vypíchnout lze, že pracují na virtuálním asistentu PineVox a zatím bezejmenných sluchátkách na lícní kosti (bone conduction).
Hyprland, kompozitor pro Wayland zaměřený na dláždění okny a zároveň grafické efekty, je již dva roky starý. Při té příležitosti byla vydána verze 0.37.0 (a záhy opravná 0.37.1 řešící chybu ve vykreslování oken). Nově závisí na knihovně hyprcursor, která poskytuje škálovatelné kurzory myši.
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)', # --------------- `install-mbr(8)', `/usr/share/doc/lilo/', # and `/usr/share/doc/mbr/'. # +---------------------------------------------------------------+ # | !! Reminder !! | # | | # | Don't forget to run `lilo' after you make changes to this | # | conffile, `/boot/bootmess.txt', or install a new kernel. The | # | computer will most likely fail to boot if a kernel-image | # | post-install script or you don't remember to run `lilo'. | # | | # +---------------------------------------------------------------+ # Support LBA for large hard disks. # lba32 # Overrides the default mapping between harddisk names and the BIOS' # harddisk order. Use with caution. disk=/dev/hdb bios=0x80 # Specifies the boot device. This is where Lilo installs its boot # block. It can be either a partition, or the raw device, in which # case it installs in the MBR, and will overwrite the current MBR. # boot=/dev/hdb # Specifies the device that should be mounted as root. (`/') # root=/dev/hdb6 # Enable map compaction: # Tries to merge read requests for adjacent sectors into a single # read request. This drastically reduces load time and keeps the # map smaller. Using `compact' is especially recommended when # booting from a floppy disk. It is disabled here by default # because it doesn't always work. # # compact # Installs the specified file as the new boot sector # You have the choice between: bmp, compat, menu and text # Look in /boot/ and in lilo.conf(5) manpage for details # install=/boot/boot-menu.b # Specifies the location of the map file # map=/boot/System.map-2.6.13.4 # You can set a password here, and uncomment the `restricted' lines # in the image definitions below to make it so that a password must # be typed to boot anything but a default configuration. If a # command line is given, other than one specified by an `append' # statement in `lilo.conf', the password will be required, but a # standard default boot will not require one. # # This will, for instance, prevent anyone with access to the # console from booting with something like `Linux init=/bin/sh', # and thus becoming `root' without proper authorization. # # Note that if you really need this type of security, you will # likely also want to use `install-mbr' to reconfigure the MBR # program, as well as set up your BIOS to disallow booting from # removable disk or CD-ROM, then put a password on getting into the # BIOS configuration as well. Please RTFM `install-mbr(8)'. # # password=tatercounter2000 # Specifies the number of deciseconds (0.1 seconds) LILO should # wait before booting the first image. # delay=20 # You can put a customized boot message up if you like. If you use # `prompt', and this computer may need to reboot unattended, you # must specify a `timeout', or it will sit there forever waiting # for a keypress. `single-key' goes with the `alias' lines in the # `image' configurations below. eg: You can press `1' to boot # `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'. # # message=/boot/bootmess.txt prompt timeout=150 # prompt # single-key # delay=100 # timeout=100 # Specifies the VGA text mode at boot time. (normal, extended, ask,mode) # # vga=ask # vga=9 # vga=normal # Kernel command line options that apply to all installed images go # here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in # the Linux kernel `Documentation' directory. # # append="" # Boot up Linux by default. # default=Linux2 #image=/vmlinuzn # label=Linux1 # read-only # restricted # alias=1 image=/boot/vmlinuz-2.6.13.4 label=Linux2 read-only # restricted # alias=2 image=/vmlinuz label=LinuxOLD read-only optional # restricted # alias=2 # If you have another OS on this machine to boot, you can uncomment the # following lines, changing the device name on the `other' line to # where your other OS' partition is. # # other=/dev/hda4 # label=HURD # restricted # alias=3 other=/dev/hdb1 label="Windows(hdb1)"
Tiskni Sdílej: