Dotaz: CardBus nefunguje od jadra 2.6.15 (asi pb. ACPI+PCI+IRQ)

[venca]

Zdravím věechny. Na notebooku jsem ještě před nedávnem (s jádrem 2.6.12) používal úspesne CardBus wifi Edimax ew-7108pcg (chipset ralink rt2500). Pak jsem upgradoval na 2.6.15, kde byla podpora PCMCIA překopaná; od té doby se změnily 2 věci:

• jádro si nevšímá vložení karty do slotu (tj. je nutno napsat pccardctl insert), vytažení však detekuje.
• karta nechodi (viz níže), ani s původním ovladačem od ralinku, ani s novým od rt2x00.serialmonkey.com, ani s ndiswrapperem.

Zkoušel jsem různé optiony pro jádro, navržené v diskusích po webu (noacpi: nic nedělá(?), ACPI se stále užívá; irqpoll; pci=routeirq), taktéž novější jádro 2.6.17, bez výsledku. Indikací problému s přerušením je poslední řádek následujícího úseku z dmesg (detekce karty, natažení ovladače, pak ale ACPI: PCI interrupt for device 0000:05:00.0 disabled!:

17179583.772000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179583.772000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179583.772000] ACPI: PCI interrupt for device 0000:05:00.0 disabled

Pokud se někdo v téhle problematice vyznáte, prosím poraďte. Díky, Venca.

Další informace.

lspci:

0000:00:00.0 Host bridge: Intel Corporation 82440MX Host Bridge (rev 01)
0000:00:00.1 Multimedia audio controller: Intel Corporation 82440MX AC'97 Audio Controller
0000:00:00.2 Modem: Intel Corporation 82440MX AC'97 Modem Controller
0000:00:07.0 Bridge: Intel Corporation 82440MX ISA Bridge (rev 01)
0000:00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller
0000:00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller
0000:00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
0000:00:12.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
0000:00:13.0 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
0000:00:13.1 CardBus bridge: O2 Micro, Inc. OZ6933/711E1 CardBus/SmartCardBus Controller (rev 02)
0000:00:14.0 VGA compatible controller: ATI Technologies Inc Rage Mobility P/M (rev 64)
0000:05:00.0 Network controller: RaLink Ralink RT2500 802.11 Cardbus Reference Card (rev 01)

/proc/interrupts (není IRQ9 nějak příliš obsazené?):

           CPU0
  0:     465029          XT-PIC  timer
  1:       7158          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  8:          3          XT-PIC  rtc
  9:       7642          XT-PIC  acpi, yenta, yenta, Intel 440MX, eth0
 12:      23585          XT-PIC  i8042
 14:       8691          XT-PIC  ide0
 15:         34          XT-PIC  uhci_hcd:usb1
NMI:          0
LOC:          0
ERR:        632
MIS:          0

Dmesg, boot se zasunutou kartou ve slotu (/proc/cmdline: root=/dev/hda5 ro init=/sbin/initng pci=routeirq ro):

[17179569.184000] Linux version 2.6.15-26-686 (buildd@terranova) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Thu Aug 3 03:13:28 UTC 2006
[17179569.184000] BIOS-provided physical RAM map:
[17179569.184000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[17179569.184000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[17179569.184000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[17179569.184000]  BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
[17179569.184000]  BIOS-e820: 0000000007fe0000 - 0000000007fefc00 (ACPI data)
[17179569.184000]  BIOS-e820: 0000000007fefc00 - 0000000007ff0000 (ACPI NVS)
[17179569.184000]  BIOS-e820: 0000000007ff0000 - 0000000007ff2000 (reserved)
[17179569.184000]  BIOS-e820: 0000000007ff2000 - 0000000008000000 (usable)
[17179569.184000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[17179569.184000] 0MB HIGHMEM available.
[17179569.184000] 128MB LOWMEM available.
[17179569.184000] On node 0 totalpages: 32768
[17179569.184000]   DMA zone: 4096 pages, LIFO batch:0
[17179569.184000]   DMA32 zone: 0 pages, LIFO batch:0
[17179569.184000]   Normal zone: 28672 pages, LIFO batch:7
[17179569.184000]   HighMem zone: 0 pages, LIFO batch:0
[17179569.184000] DMI 2.3 present.
[17179569.184000] ACPI: RSDP (v000 FUJ                                   ) @ 0x000f6440
[17179569.184000] ACPI: RSDT (v001 FUJ    QUILT3   0x01200000 FUJ  0x00001000) @ 0x07fec336
[17179569.184000] ACPI: FADT (v001 FUJ    QUILT3   0x01200000 FUJ  0x00001000) @ 0x07fefb8c
[17179569.184000] ACPI: DSDT (v001 FUJ    QUILT3   0x01200000 MSFT 0x01000007) @ 0x00000000
[17179569.184000] ACPI: PM-Timer IO Port: 0xff08
[17179569.184000] Allocating PCI resources starting at 10000000 (gap: 08000000:f7f00000)
[17179569.184000] Built 1 zonelists
[17179569.184000] Kernel command line: root=/dev/hda5 ro init=/sbin/initng pci=routeirq ro
[17179569.184000] Local APIC disabled by BIOS (or by default) -- you can enable it with "lapic"
[17179569.184000] mapped APIC to ffffd000 (01161000)
[17179569.184000] Initializing CPU#0
[17179569.184000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[17179569.184000] Detected 696.673 MHz processor.
[17179569.184000] Using pmtmr for high-res timesource
[17179569.184000] Console: colour VGA+ 80x25
[17179569.864000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[17179569.868000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[17179569.876000] Memory: 119100k/131072k available (2110k kernel code, 11364k reserved, 595k data, 332k init, 0k highmem)
[17179569.876000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[17179569.960000] Calibrating delay using timer specific routine.. 1394.53 BogoMIPS (lpj=2789071)
[17179569.960000] Security Framework v1.0.0 initialized
[17179569.960000] SELinux:  Disabled at boot.
[17179569.960000] Mount-cache hash table entries: 512
[17179569.960000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.960000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[17179569.960000] CPU: L1 I cache: 16K, L1 D cache: 16K
[17179569.960000] CPU: L2 cache: 512K
[17179569.960000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[17179569.960000] mtrr: v2.0 (20020519)
[17179569.960000] Enabling fast FPU save and restore... done.
[17179569.960000] Enabling unmasked SIMD FPU exception support... done.
[17179569.960000] Checking 'hlt' instruction... OK.
[17179569.976000] SMP alternatives: switching to UP code
[17179569.976000] checking if image is initramfs... it is
[17179571.308000] Freeing initrd memory: 6253k freed
[17179571.344000] ACPI: Looking for DSDT ... not found!
[17179571.352000] ACPI: setting ELCR to 0200 (from 8200)
[17179571.356000] CPU0: Intel(R) Pentium(R) III Mobile CPU       700MHz stepping 01
[17179571.356000] SMP motherboard not detected.
[17179571.356000] Local APIC not detected. Using dummy APIC emulation.
[17179571.356000] Brought up 1 CPUs
[17179571.356000] NET: Registered protocol family 16
[17179571.356000] EISA bus registered
[17179571.356000] ACPI: bus type pci registered
[17179571.356000] PCI: PCI BIOS revision 2.10 entry at 0xfd9ce, last bus=2
[17179571.356000] PCI: Using configuration type 1
[17179571.360000] ACPI: Subsystem revision 20051216
[17179571.368000] ACPI: Interpreter enabled
[17179571.368000] ACPI: Using PIC for interrupt routing
[17179571.368000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[17179571.368000] PCI: Probing PCI hardware (bus 00)
[17179571.368000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[17179571.376000] Boot video device is 0000:00:14.0
[17179571.376000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[17179571.380000] ACPI: Embedded Controller [EC] (gpe 44) interrupt mode.
[17179571.388000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[17179571.388000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
[17179571.388000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11)
[17179571.392000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *15)
[17179571.392000] ACPI: Power Resource [USBP] (on)
[17179571.392000] Linux Plug and Play Support v0.97 (c) Adam Belay
[17179571.392000] pnp: PnP ACPI init
[17179571.400000] pnp: PnP ACPI: found 9 devices
[17179571.400000] PnPBIOS: Disabled by ACPI PNP
[17179571.400000] PCI: Using ACPI for IRQ routing
[17179571.400000] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
[17179571.400000] **** SET: Misaligned resource pointer: c119d182 Type 07 Len 0
[17179571.400000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[17179571.400000] PCI: setting IRQ 9 as level-triggered
[17179571.400000] ACPI: PCI Interrupt 0000:00:00.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179571.400000] ACPI: PCI Interrupt 0000:00:00.2[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179571.400000] **** SET: Misaligned resource pointer: c119d182 Type 07 Len 0
[17179571.400000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
[17179571.400000] PCI: setting IRQ 15 as level-triggered
[17179571.400000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
[17179571.404000] **** SET: Misaligned resource pointer: c119d182 Type 07 Len 0
[17179571.404000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[17179571.404000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[17179571.404000] **** SET: Misaligned resource pointer: c119d182 Type 07 Len 0
[17179571.404000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[17179571.404000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[17179571.404000] ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179571.404000] ACPI: PCI Interrupt 0000:00:14.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[17179571.408000] pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
[17179571.408000] pnp: 00:00: ioport range 0xff00-0xff3f could not be reserved
[17179571.408000] pnp: 00:00: ioport range 0xf800-0xf87f has been reserved
[17179571.408000] PCI: Bus 1, cardbus bridge: 0000:00:13.0
[17179571.408000]   IO window: 00001c00-00001cff
[17179571.408000]   IO window: 00002400-000024ff
[17179571.408000]   PREFETCH window: 10000000-11ffffff
[17179571.408000]   MEM window: 12000000-13ffffff
[17179571.408000] PCI: Bus 5, cardbus bridge: 0000:00:13.1
[17179571.408000]   IO window: 00002800-000028ff
[17179571.408000]   IO window: 00002c00-00002cff
[17179571.408000]   PREFETCH window: 14000000-15ffffff
[17179571.408000]   MEM window: 16000000-17ffffff
[17179571.408000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[17179571.408000] PCI: Setting latency timer of device 0000:00:13.0 to 64
[17179571.408000] ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179571.408000] PCI: Setting latency timer of device 0000:00:13.1 to 64
[17179571.408000] audit: initializing netlink socket (disabled)
[17179571.408000] audit(1156672657.404:1): initialized
[17179571.408000] VFS: Disk quotas dquot_6.5.1
[17179571.408000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[17179571.408000] Initializing Cryptographic API
[17179571.412000] io scheduler noop registered
[17179571.412000] io scheduler anticipatory registered
[17179571.412000] io scheduler deadline registered
[17179571.412000] io scheduler cfq registered
[17179571.412000] isapnp: Scanning for PnP cards...
[17179571.764000] isapnp: No Plug & Play device found
[17179571.808000] Real Time Clock Driver v1.12
[17179571.808000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[17179571.808000] serio: i8042 AUX port at 0x60,0x64 irq 12
[17179571.812000] serio: i8042 KBD port at 0x60,0x64 irq 1
[17179571.812000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[17179571.812000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.816000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[17179571.816000] PCI: Enabling device 0000:00:00.2 (0000 -> 0001)
[17179571.816000] ACPI: PCI Interrupt 0000:00:00.2[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179571.816000] ACPI: PCI interrupt for device 0000:00:00.2 disabled
[17179571.820000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[17179571.820000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[17179571.820000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[17179571.820000] mice: PS/2 mouse device common for all mice
[17179571.820000] EISA: Probing bus 0 at eisa.0
[17179571.820000] Cannot allocate resource for EISA slot 1
[17179571.820000] Cannot allocate resource for EISA slot 2
[17179571.820000] Cannot allocate resource for EISA slot 8
[17179571.820000] EISA: Detected 0 cards.
[17179571.820000] NET: Registered protocol family 2
[17179571.856000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[17179571.856000] TCP established hash table entries: 8192 (order: 4, 98304 bytes)
[17179571.856000] TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
[17179571.856000] TCP: Hash tables configured (established 8192 bind 8192)
[17179571.856000] TCP reno registered
[17179571.856000] TCP bic registered
[17179571.856000] NET: Registered protocol family 1
[17179571.856000] NET: Registered protocol family 8
[17179571.856000] NET: Registered protocol family 20
[17179571.856000] Using IPI No-Shortcut mode
[17179571.856000] ACPI wakeup devices:
[17179571.856000] PCI0 UAR1  MDM  LID
[17179571.856000] ACPI: (supports S0 S3 S4 S5)
[17179571.856000] Freeing unused kernel memory: 332k freed
[17179571.864000] input: AT Translated Set 2 keyboard as /class/input/input0
[17179571.972000] Capability LSM initialized
[17179572.060000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[17179572.060000] ACPI: Processor [CPU0] (supports 8 throttling states)
[17179573.000000] PIIX4: IDE controller at PCI slot 0000:00:07.1
[17179573.000000] PIIX4: chipset revision 0
[17179573.000000] PIIX4: not 100% native mode: will probe irqs later
[17179573.000000]     ide0: BM-DMA at 0x1460-0x1467, BIOS settings: hda:DMA, hdb:pio
[17179573.000000] Probing IDE interface ide0...
[17179573.292000] hda: TOSHIBA MK6034GAX, ATA DISK drive
[17179573.964000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[17179574.004000] hda: max request size: 1024KiB
[17179574.004000] hda: 117210240 sectors (60011 MB), CHS=16383/255/63, UDMA(33)
[17179574.004000] hda: cache flushes supported
[17179574.004000]  hda: hda1 hda2 hda3 < hda5 hda6 hda7 >
[17179574.444000] usbcore: registered new driver usbfs
[17179574.444000] usbcore: registered new driver hub
[17179574.452000] USB Universal Host Controller Interface driver v2.3
[17179574.452000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
[17179574.452000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[17179574.452000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[17179574.452000] uhci_hcd 0000:00:07.2: irq 15, io base 0x00001440
[17179574.456000] hub 1-0:1.0: USB hub found
[17179574.456000] hub 1-0:1.0: 2 ports detected
[17179574.612000] Probing IDE interface ide1...
[17179574.800000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[17179574.940000] hub 1-2:1.0: USB hub found
[17179574.944000] hub 1-2:1.0: 2 ports detected
[17179575.320000] EXT3-fs: mounted filesystem with ordered data mode.
[17179575.356000] kjournald starting.  Commit interval 5 seconds
[17179582.300000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[17179582.300000] Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10e6]
[17179582.300000] Yenta O2: res at 0x94/0xD4: ea/00
[17179582.300000] Yenta O2: enabling read prefetch/write burst
[17179582.368000] 8139too Fast Ethernet driver 0.9.27
[17179582.368000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[17179582.368000] eth0: RealTek RTL8139 at 0xc8932000, 00:e0:00:83:b0:ea, IRQ 9
[17179582.368000] eth0:  Identified 8139 chip type 'RTL-8139C'
[17179582.428000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[17179582.428000] Socket status: 30000006
[17179582.428000] ACPI: PCI Interrupt 0000:00:13.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179582.428000] Yenta: CardBus bridge found at 0000:00:13.1 [10cf:10e6]
[17179582.556000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[17179582.556000] Socket status: 30000820
[17179582.676000] ACPI: PCI Interrupt 0000:00:00.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179582.676000] PCI: Setting latency timer of device 0000:00:00.1 to 64
[17179582.688000] input: PC Speaker as /class/input/input1
[17179582.724000] input: LBPS/2 Fujitsu Lifebook TouchScreen as /class/input/input2
[17179582.732000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[17179583.192000] pccard: CardBus card inserted into slot 1
[17179583.244000] intel8x0_measure_ac97_clock: measured 55248 usecs
[17179583.244000] intel8x0: clocking to 48000
[17179583.244000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[17179583.772000] ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[17179583.772000] rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
[17179583.772000] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[17179583.800000] ts: Compaq touchscreen protocol output
[17179584.192000] cs: IO port probe 0x100-0x3af: clean.
[17179584.192000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179584.192000] cs: IO port probe 0x820-0x8ff: clean.
[17179584.192000] cs: IO port probe 0xc00-0xcf7: clean.
[17179584.192000] cs: IO port probe 0xa00-0xaff: clean.
[17179584.196000] cs: IO port probe 0x100-0x3af: clean.
[17179584.196000] cs: IO port probe 0x3e0-0x4ff: clean.
[17179584.196000] cs: IO port probe 0x820-0x8ff: clean.
[17179584.196000] cs: IO port probe 0xc00-0xcf7: clean.
[17179584.196000] cs: IO port probe 0xa00-0xaff: clean.
[17179584.808000] EXT3 FS on hda5, internal journal
[17179585.608000] kjournald starting.  Commit interval 5 seconds
[17179585.612000] EXT3 FS on hda7, internal journal
[17179585.612000] EXT3-fs: mounted filesystem with ordered data mode.
[17179585.628000] Linux agpgart interface v0.101 (c) Dave Jones
[17179585.644000] Adding 499688k swap on /dev/hda6.  Priority:-1 extents:1 across:499688k
[17179585.680000] [drm] Initialized drm 1.0.1 20051102
[17179585.920000] acpi-cpufreq: CPU0 - ACPI performance management activated.
[17179586.036000] SCSI subsystem initialized
[17179586.060000] Initializing USB Mass Storage driver...
[17179586.060000] usbcore: registered new driver usb-storage
[17179586.060000] USB Mass Storage support registered.
[17179588.752000] ACPI: Battery Slot [CMB1] (battery present)
[17179588.816000] ACPI: AC Adapter [AC] (on-line)
[17179589.712000] ACPI: Power Button (FF) [PWRF]
[17179589.712000] ACPI: Power Button (CM) [PWRB]
[17179589.712000] ACPI: Lid Switch [LID]
[17179590.160000] ibm_acpi: ec object not found
[17179590.316000] pcc_acpi: loading...
[17179590.524000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[17179595.204000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[17179598.172000] NET: Registered protocol family 17
[17179739.372000] spurious 8259A interrupt: IRQ7.

Odpovědi

[kEdAR]

Ahoj,
asi ti moc neporadim, ale predpokladam ze mas Fujitsu Lifebook ?
neni mi jasne jestli mas problem jen z tou wifi, nebo ti zlobi i jine.

Ja mam B142, s 2.6.17.4 mi funguje vyjmuti/vlozeni pcmcia ok (s jinym sem nezkousel)
Kdyz tak porovnavam, napada me:
- mame stejnej chipset
- v cmdline nemam routeirq (asi ti to ale neslo i bez neho)
- kompiloval sem s gcc 3.4.6
- mam jinej CardBus bridge
- pouzivam jinou pcmcia, navic ethernet :)
=========================================================

nicmene vyjmuti:
pccard: card ejected from slot 0
ACPI: PCI interrupt for device 0000:01:00.0 disabled

vlozeni:
pccard: CardBus card inserted into slot 0
PCI: Enabling device 0000:01:00.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
PCI: Setting latency timer of device 0000:01:00.0 to 64
eth0: RealTek RTL8139 at 0x1000, 00:a1:b0:00:89:9b, IRQ 9
eth0:  Identified 8139 chip type 'RTL-8139C'

=========================================================
# lspci
00:00.0 Host bridge: Intel Corporation 82440MX Host Bridge (rev 01)
00:07.0 Bridge: Intel Corporation 82440MX ISA Bridge (rev 01)
00:07.1 IDE interface: Intel Corporation 82440MX EIDE Controller
00:07.2 USB Controller: Intel Corporation 82440MX USB Universal Host Controller
00:07.3 Bridge: Intel Corporation 82440MX Power Management Controller
00:0d.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 02)
00:10.0 Communication controller: Rockwell International HSF 56k Data/Fax/Voice/Spkp (w/Handset) Modem (rev 01)
00:13.0 CardBus bridge: Ricoh Co Ltd RL5c475
00:14.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (rev 01)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)

# cat /proc/interrupts|grep 9:
  9:     360624          XT-PIC  acpi, yenta, uhci_hcd:usb1, ES1938

=========================================================


Jo a mel bych otazku, chodi ti touchscreen ? ne ze by to s tim souviselo :) 
Jestli chodi, pouzil jsi nejaky patche ? lbtouch ? evtouch ? psmouse-lifebook ?
btw: tim chodi, myslim tak jako touchscreen, ne jako mys :)

kEdAR

[kEdAR]

Tak si taky odpovim sam... :)
Touchscreen uz mi chodi, pouzil jsem binarni evtouch z http://www.stz-softwaretechnik.de/~ke/touchscreen/evtouch.html, zkalibroval rucne od oka zmnenou MinX,Y a MaxX,Y.(calibrace z ovladace mi nechodila)
Jo a hlavne, bylo potreba vyjmout a vlozit psmouse, pak se teprve touchscreen zacal hlasit ze je pripojen k LBPS/2 (pretim k PS/2).
Jadro mam 2.6.17.4, Xka 6.9.0
btw: binarka evtouch je pro 4.x, ale chodi :)

[Franta]

Sorry, byl jsem mimo net. Touchscreen mi chodi presne jak popisujes, vanillova psmouse podporuje lifebooky tusim od 2.6.13 vcetne. Koukam ze s tim PCMCIA se to nejak nevyresilo, ale jsem rad, ze nejsem jediny exot, kdo ma ten problem. Kdybych nejak pokrocil, ozvu se tady.