Portál AbcLinuxu, 18. dubna 2024 08:31
glxinfo | grep direct
direct rendering: Yes
glxgears -printfps 2888 frames in 5.0 seconds = 577.510 FPS 3032 frames in 5.0 seconds = 606.290 FPS 3071 frames in 5.0 seconds = 614.129 FPS 3091 frames in 5.0 seconds = 618.049 FPS 3097 frames in 5.0 seconds = 619.300 FPS 3126 frames in 5.0 seconds = 625.045 FPS 3174 frames in 5.0 seconds = 634.738 FPS 3169 frames in 5.0 seconds = 632.758 FPS 3209 frames in 5.0 seconds = 640.231 FPS 3198 frames in 5.0 seconds = 637.876 FPS 3193 frames in 5.0 seconds = 636.967 FPS 3196 frames in 5.0 seconds = 637.228 FPS 3222 frames in 5.0 seconds = 643.403 FPS 3210 frames in 5.0 seconds = 639.914 FPS 3217 frames in 5.0 seconds = 641.779 FPS 3217 frames in 5.0 seconds = 640.286 FPS 3197 frames in 5.0 seconds = 638.342 FPS 3174 frames in 5.0 seconds = 633.017 FPS 3212 frames in 5.0 seconds = 640.438 FPS 3211 frames in 5.0 seconds = 640.092 FPS 3181 frames in 5.0 seconds = 634.174 FPS 3156 frames in 5.0 seconds = 629.240 FPS 3171 frames in 5.0 seconds = 632.068 FPS 3080 frames in 5.0 seconds = 613.767 FPS 3088 frames in 5.0 seconds = 615.304 FPS 3110 frames in 5.0 seconds = 621.309 FPS 3094 frames in 5.0 seconds = 616.767 FPS 3146 frames in 5.0 seconds = 627.046 FPS 3130 frames in 5.0 seconds = 624.237 FPS X connection to :0.0 broken (explicit kill or server shutdown).Co mam spatne nastaveny (popr. kde) ze to dava tak maly hodnoty?? Instaloval jsem to podle navodu (ty ovladace) a tam psali, ze by to melo by alespon nad 1000FPS
Jeste prikladam xorg.confERROR: Installation has failed.).
Po správnom kompilovaní je ten log oveľa dlhší (sú v ňom aj výpisi gcc...).
Máš nainštalované zdrojové kódy kernelu (ale keďže používaš Ubuntu, tak asi áno).
[CTRL]+[ALT]+[F1]Prihlasim se jako root
/etc/init.d/gdm stop apt-get remove nvidia-glx nvidia- ..... (vse nvidia*) cd /nvidia/; sh NVIDIA-Linux-x86-1.0-9742-pkg1.runNa otazku zda chci chci stahnout z nvidia.com dam ne...a posleze to da to stejne, co predtim.
linux, linux-386, linux 686, linux-generic, inux-restricted-modules-2.6.17-10-generic, linux-restricted-modules-2.6.17-10-386Kdyz tam necham
nvidia-kernel-commontak tam muzu mit ty balicky....(zavisi na ni). Ale stejne me to vyhodi.
rmmod nvidiaa take
/etc/init.d/nvidia-kernel stopa nepomohlo to.
* Stopping GNOME Display Manager... [ok]
Nainst. balicky pred sputenim: linux-source - ten zavisi na linux-source-2.6.17 (coz je verze meho jadra) Jeste jsem si nainst. linux-386, linux-image-2.6.17-10-386jelikoz je to ma architektura
#cat /proc/version Linux version 2.6.17-10-386 (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease)Odkaz : nvidia-installer2.log
(Ubuntu 4.1.1-13ubuntu5)) #2 Fri Oct 13 18:41:40 UTC 2006 (Ubuntu 2.6.17-10.33-386)
-> Kernel source path: '/lib/modules/2.6.17-10-386/build' u me je cesta /usr/src/linux-verze a jako parametr instalatoru to je --kernel-source-path=/usr/src/linux-verze...
9.12.2006 14:12
Jiří Němec | skóre: 22
| blog: BluPix
| Horní Smrčné
mplayer -vo helpXvMC je. Ale pokud dam
mplayer -vo xvmczkonci to chybou.
~# mplayer -vo xvmc a.avi MPlayer 2:0.99+1.0pre8-0ubuntu8 (C) 2000-2006 MPlayer Team CPU: AMD Athlon(tm) 64 Processor 3000+ (Family: 15, Model: 47, Stepping: 2) CPUflags: MMX: 1 MMX2: 1 3DNow: 1 3DNow2: 1 SSE: 1 SSE2: 1 Compiled with runtime CPU detection. Cannot load font: /usr/X11R6/lib/X11/fonts/TTF/arial.ttf Opening joystick device /dev/input/js0 Can't open joystick device /dev/input/js0: No such file or directory Can't init input joystick Setting up LIRC support... mplayer: could not connect to socket mplayer: No such file or directory Failed to open LIRC support. You will not be able to use your remote control. Playing a.avi AVI file format detected. VIDEO: [DIV3] 640x336 24bpp 23.976 fps 609.8 kbps (74.4 kbyte/s) SUB: Detected subtitle file format: microdvd SUB: Read 1650 subtitles. SUB: Added subtitle file (1): ./a.srt ========================================================================== Requested audio codec family [mp3] (afm=mp3lib) not available. Enable it at compilation. Opening audio decoder: [ffmpeg] FFmpeg/libavcodec audio decoders AUDIO: 48000 Hz, 2 ch, s16le, 128.0 kbit/8.33% (ratio: 16000->192000) Selected audio codec: [ffmp3] afm: ffmpeg (FFmpeg MPEG layer-3 audio decoder) ========================================================================== vo_xvmc: X-Video extension 2.2 vo_xvmc: X-Video MotionCompensation Extension version 1.1 ========================================================================== Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivXna ten font se nedivejte:)) (arial.ttf)(MS MPEG-4 v3)) ========================================================================== alsa-init: using device default alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample) Starting playback... VDec: vo config request - 640 x 336 (preferred colorspace: Planar YV12) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp. VDec: vo config request - 640 x 336 (preferred colorspace: Planar YV12) Could not find matching colorspace - retrying with -vf scale... Opening video filter: [scale] The selected video_out device is incompatible with this codec. Try adding the scale filter, e.g. -vf spp,scale instead of -vf spp. FATAL: Could not initialize video filters (-vf) or video output (-vo). alsa-uninit: pcm closed Exiting... (End of file)
9.12.2006 15:57
Luboš Doležel (Doli) | skóre: 98
| blog: Doliho blog
| Kladensko
9.12.2006 16:11
Jiří Němec | skóre: 22
| blog: BluPix
| Horní Smrčné
Forced video codec: ffmpeg12mc Cannot find codec matching selected -vo and video format 0x33564944. Read DOCS/HTML/en/codecs.html! ========================================================================== mcop warning: user defined signal handler found for SIG_PIPE, overriding Creating link /home/murry/.kde/socket-petr. can't create mcop directoryJinak HD film -- ja nevim co to je...takze vam to doopravdy nereknu
))
9.12.2006 16:33
Jiří Němec | skóre: 22
| blog: BluPix
| Horní Smrčné
9.12.2006 16:13
Luboš Doležel (Doli) | skóre: 98
| blog: Doliho blog
| Kladensko
delal jsem to presne podle navodu a
napsalo to konkretne toto:
[: 896: ==: unexpected operator
make[1]: Makefile: No such file or directory
make[1]: *** No rule to make target `Makefile'. Stop.
make: *** [print-module-filename] Error 2
ERROR: Unable to determine the NVIDIA kernel module filename.
ERROR: Installation has failed. Please see the file
'/var/log/nvidia-installer.log' for details. You may find
suggestions on fixing installation problems in the README available
on the Linux driver download page at www.nvidia.com.
Prikladam log:nvidia-installer3.log
http://murry.ic.cz/nvidia-installer3.log
/usr/src/linux-headers-2.6.17-10-generic/
`uname -r`ktery mi dava
2.6.17-10-386Tak jakto tedy mam udelat?
nvidia-installer --kernel-name=2.6.17-10-386?
00:05.0 VGA compatible controller: nVidia Corporation C51PV [GeForce 6150] (rev a2) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device 81cd
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
Memory at f8000000 (32-bit, non-prefetchable) [size=16M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
Která má:
[petr@soban ~]$ glxgears 10580 frames in 5.0 seconds = 2115.934 FPS 11449 frames in 5.0 seconds = 2289.697 FPS 11464 frames in 5.0 seconds = 2292.798 FPS 11457 frames in 5.0 seconds = 2291.390 FPS 11452 frames in 5.0 seconds = 2290.359 FPS 11446 frames in 5.0 seconds = 2289.046 FPSOvladače:
[petr@soban /proc/driver/nvidia]$ cat version NVRM version: NVIDIA Linux x86_64 Kernel Module 1.0-9631 Thu Nov 9 17:35:27 PST 2006 GCC version: gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)Jinak taky by to chtělo možná upravit konfigurák X ek zda se mu něco nelíbí. Já mám v /etc/X11/xorg.conf:
[petr@soban ~]$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder26) Tue Aug 1 22:01:29 PDT 2006
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
EndSection
Section "Module"
Load "dbe"
# Load the glx module.
Load "glx"
Load "extmod"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "cz"
Option "XkbVariant" "qwerty"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
Option "AddARGBGLXVisuals" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
Option "NoLogo"
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.