apcupsd spatne obsluhuje UPSku

Ahoj, mam takovy problem - apcupsd nejak spatne obsluhuje Smart APC upsku, totiz okamzite po vypadku napajeni se zahaji shutdown PC. I kdyz jsem odzkousel, ze UPSka utahne kompa bez napajeni cca 35 minut. Kdyz pustim /etc/init.d/apcupsd status, ziskam mimojine toto:

CABLE    : Custom Cable Smart
MODEL    : Smart-UPS 620
UPSMODE  : Stand Alone
STARTTIME: Sat Aug 04 14:27:26 CEST 2007
STATUS   : ONLINE LOWBATT
LINEV    : 234.7 Volts
LOADPCT  :  27.9 Percent Load Capacity
BCHARGE  : 100.0 Percent
TIMELEFT :   2.0 Minutes

Tam se mi moc nelibi to TIMELEFT a STATUS LOWBAT.

apcupsd.conf vypada nasledovne:

UPSCABLE 940-0024C
UPSTYPE apcsmart
DEVICE /dev/ttyS0
LOCKFILE /var/lock
SCRIPTDIR /etc/apcupsd
PWRFAILDIR /etc/apcupsd
NOLOGINDIR /etc
ONBATTERYDELAY 6
BATTERYLEVEL 5
MINUTES 3
TIMEOUT 0
ANNOY 300
ANNOYDELAY 60
NOLOGON disable
KILLDELAY 0
NETSERVER on
NISIP 0.0.0.0
NISPORT 3551
EVENTSFILE /var/log/apcupsd.events
EVENTSFILEMAX 10
UPSCLASS standalone
UPSMODE disable
STATTIME 0
STATFILE /var/log/apcupsd.status
LOGSTATS off
DATATIME 0

Je tam nekde chyba nebo muze byt chyba v komunikaci s UPSkou? Jinak verze apcupsd jsem zkousel 3.12.4 a 3.14.1

Dik za odpovedi...

Dotaz: apcupsd spatne obsluhuje UPSku

Odpovědi