Valkey, tj. svobodný fork již nesvobodného Redisu, byl vydán v první stabilní verzi 7.2.5.
Společnost Espressif Systems oznámila, že rodinu SoC ESP32 brzy rozšíří o ESP32-H4 s IEEE 802.15.4 a Bluetooth 5.4 (LE) s podporou protokolů Thread 1.3, Zigbee 3.0 a Bluetooth Mesh 1.1.
Kevin Bentley zveřejnil na GitHubu zdrojové kódy počítačové hry Descent 3 z roku 1999: "Někdo se nedávno zeptal, zda budou zveřejněny zdrojové kódy Descent 3. Oslovil jsem svého bývalého šéfa (Matt Toschlog) z Outrage Entertainment a ten mi to povolil. Budu pracovat na tom, aby se to znovu rozběhlo a hledám spolusprávce." [Hacker News]
Byla vydána verze 0.81 telnet a ssh klienta PuTTY. Opravena je kritická bezpečnostní chyba CVE-2024-31497 obsažena ve verzích 0.68 až 0.80. Používáte-li klíč ECDSA NIST P521 a použili jste jej v PuTTY nebo Pageantu, považujte jej za kompromitovaný.
Hra MineClone2 postavena nad voxelovým herním enginem Minetest byla přejmenována na VoxeLibre.
Společnosti Avast Software s.r.o. byla pravomocně uložena pokuta ve výši 351 milionů Kč. Tu uložil Úřad pro ochranu osobních údajů za neoprávněné zpracování osobních údajů uživatelů jejího antivirového programu Avast a jeho rozšíření internetových prohlížečů (Browser Extensions), k čemuž docházelo prokazatelně po část roku 2019.
… více »Bylo vydáno do češtiny přeložené číslo 714 týdeníku WeeklyOSM přinášející zprávy ze světa OpenStreetMap.
V sobotu 20. dubna lze navštívit Maker Faire Jihlava, festival plný workshopů, interaktivních činností a především nadšených a zvídavých lidí.
Knihovna pro potlačení šumu RNNoise byla vydána ve verzi 0.2. Kvalitu potlačení lze vyzkoušet na webovém demu.
FRRouting (FRR) (Wikipedie), tj. softwarová sada pro směrování síťové komunikace, fork Quagga, byl vydán ve verzi 10.0.
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
1.Takze vypis dmesg
2. cat /var/log/messages
3. lsmod
4. lspci
The update-modules command is deprecated and should not be used!
/etc/init.d/alsa reload
$ dmesg .. .. .. NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8. kobject_add failed for audio with -EEXIST, don't try to register things with the same name in the same directory. [c01c8db0>] kobject_shadow_add+0x150/0x182 [c01c8f7e>] kobject_set_name+0x2b/0x92 [c0225e8f>] device_add+0xa7/0x611 [c01c8a6c>] kobject_get+0xf/0x13 [c0226905>] device_create+0x77/0x9a [e0bae0b7>] oss_init+0xb7/0x146 [sound] [c013ee72>] sys_init_module+0x1698/0x17cf [e0ca68a7>] ext3_mark_inode_dirty+0x20/0x27 [ext3] [c015b7dc>] do_mmap_pgoff+0x564/0x6c4 [e0c91236>] register_sound_midi+0x0/0x3c [soundcore] [c0103d8c>] syscall_call+0x7/0xb ======================= fuse init (API version 7.8) ADDRCONF(NETDEV_UP): eth1: link is not ready ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready eth1: no IPv6 routers present ACPI: PCI interrupt for device 0000:00:1f.5 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55453 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt for device 0000:00:1f.5 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55387 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt for device 0000:00:1f.5 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55496 usecs intel8x0: clocking to 48000 ACPI: PCI interrupt for device 0000:00:1f.5 disabled ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 55468 usecs intel8x0: clocking to 48000 mtrr: no more MTRRs available
cat /proc/asound/cards
$ dmesg
>Yenta: ISA IRQ mask 0x0438, PCI irq 11
Socket status: 30000086
pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
cs: IO port probe 0x4000-0x8fff: clean.
pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
serio: Synaptics pass-through port at isa0060/serio1/input0
input: SynPS/2 Synaptics TouchPad as /class/input/input1
pnp: Device 00:0c activated.
nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
nsc-ircc, chip->init
nsc-ircc, Found chip at base=0x02e
nsc-ircc, driver loaded (Dag Brattli)
IrDA: Registered device irda0
nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
intel8x0_measure_ac97_clock: measured 55452 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
Adding 967640k swap on /dev/hda7. Priority:-1 extents:1 across:967640k
EXT3 FS on hda6, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
NTFS driver 2.1.28 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
NTFS-fs warning (device hda1): load_system_files(): Unsupported volume flags 0x4000 encountered.
NTFS-fs warning (device hda1): load_system_files(): Volume has unsupported flags set. Will not be able to remount read-write. Run chkdsk and mount in Windows.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: AC Adapter [AC] (on-line)
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input5
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
ieee80211_crypt: registered algorithm 'TKIP'
eth1: no IPv6 routers present
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x5b53.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x59fe.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x5a85.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x240.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x5c28.
printk: 6 messages suppressed.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x6130.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x50ab.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x50ad.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x50b9.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x4d77.
Stopping tasks ... done.
Suspending console(s)
usbdev4.1: PM: suspend 0->2, parent usb4 already 2
usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
usbdev3.1: PM: suspend 0->2, parent usb3 already 2
usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
usbdev2.1: PM: suspend 0->2, parent usb2 already 2
usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
pnp: Device 00:0c disabled.
pnp: Device 00:0b disabled.
pnp: Device 00:0a disabled.
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:02:01.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801)
usb usb1: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821)
usb usb2: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841)
usb usb3: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing c0000000)
PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900006, writing 2900106)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000)
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Clocksource tsc unstable (delta = 3465658433431 ns)
Time: acpi_pm clocksource has been installed.
PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001)
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
PM: Writing back config space on device 0000:02:01.0 at offset f (was ff0100, writing ff010b)
PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 1, writing 8001)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing c0200000)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing c0220000)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2300000, writing 2300117)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:0a activated.
pnp: Device 00:0b activated.
pnp: Device 00:0c activated.
usbdev4.1_ep00: PM: resume from 0, parent usb4 still 2
usbdev4.1_ep81: PM: resume from 0, parent 4-0:1.0 still 2
usbdev4.1: PM: resume from 0, parent usb4 still 2
Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
hub 2-0:1.0: over-current change on port 2
done.
hub 4-0:1.0: over-current change on port 3
hub 4-0:1.0: over-current change on port 4
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55465 usecs
intel8x0: clocking to 48000
Stopping tasks ... done.
Suspending console(s)
usbdev4.1: PM: suspend 0->2, parent usb4 already 2
usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
usbdev3.1: PM: suspend 0->2, parent usb3 already 2
usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
usbdev2.1: PM: suspend 0->2, parent usb2 already 2
usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
pnp: Device 00:0c disabled.
pnp: Device 00:0b disabled.
pnp: Device 00:0a disabled.
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:02:01.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801)
usb usb1: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821)
usb usb2: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841)
usb usb3: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing c0000000)
PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900006, writing 2900106)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000)
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001)
PM: Writing back config space on device 0000:02:01.0 at offset f (was ff0100, writing ff010b)
PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 1, writing 8001)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing c0200000)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing c0220000)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2300000, writing 2300117)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:0a activated.
pnp: Device 00:0b activated.
pnp: Device 00:0c activated.
usbdev4.1_ep00: PM: resume from 0, parent usb4 still 2
usbdev4.1_ep81: PM: resume from 0, parent 4-0:1.0 still 2
usbdev4.1: PM: resume from 0, parent usb4 still 2
Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
done.
hub 2-0:1.0: over-current change on port 2
hub 4-0:1.0: over-current change on port 3
hub 4-0:1.0: over-current change on port 4
printk: 4 messages suppressed.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x71e9.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x617e.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x6916.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x6d7c.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x144a.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x67f7.
NTFS-fs error (device hda1): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda1): ntfs_filldir(): Skipping unrepresentable inode 0x5f78.
printk: 4 messages suppressed.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
NTFS-fs warning (device hda5): ntfs_filldir(): Skipping unrepresentable inode 0x6130.
printk: 414 messages suppressed.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
printk: 15 messages suppressed.
NTFS-fs error (device hda5): ntfs_ucstonls(): Unicode name contains characters that cannot be converted to character set iso8859-1. You might want to try to use the mount option nls=utf8.
kobject_add failed for audio with -EEXIST, don't try to register things with the same name in the same directory.
[c01c8db0>] kobject_shadow_add+0x150/0x182
c01c8f7e>] kobject_set_name+0x2b/0x92
[c0225e8f>] device_add+0xa7/0x611
[c01c8a6c>] kobject_get+0xf/0x13
[c0226905>] device_create+0x77/0x9a
[e0bae0b7>] oss_init+0xb7/0x146 [sound]
[c013ee72>] sys_init_module+0x1698/0x17cf
[e0ca68a7>] ext3_mark_inode_dirty+0x20/0x27 [ext3]
[c015b7dc>] do_mmap_pgoff+0x564/0x6c4
[e0c91236>] register_sound_midi+0x0/0x3c [soundcore]
[c0103d8c>] syscall_call+0x7/0xb
=======================
fuse init (API version 7.8)
ADDRCONF(NETDEV_UP): eth1: link is not ready
ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
eth1: no IPv6 routers present
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55453 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55387 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55496 usecs
intel8x0: clocking to 48000
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 55468 usecs
intel8x0: clocking to 48000
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
mtrr: no more MTRRs available
speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
Stopping tasks ... done.
Suspending console(s)
usbdev4.1: PM: suspend 0->2, parent usb4 already 2
usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
usbdev3.1: PM: suspend 0->2, parent usb3 already 2
usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
usbdev2.1: PM: suspend 0->2, parent usb2 already 2
usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
pnp: Device 00:0c disabled.
pnp: Device 00:0b disabled.
pnp: Device 00:0a disabled.
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:02:01.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801)
usb usb1: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821)
usb usb2: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841)
usb usb3: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing c0000000)
PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900006, writing 2900106)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000)
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001)
PM: Writing back config space on device 0000:02:01.0 at offset f (was ff0100, writing ff010b)
PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 1, writing 8001)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing c0200000)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing c0220000)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2300000, writing 2300117)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:0a activated.
pnp: Device 00:0b activated.
pnp: Device 00:0c activated.
usbdev4.1_ep00: PM: resume from 0, parent usb4 still 2
usbdev4.1_ep81: PM: resume from 0, parent 4-0:1.0 still 2
usbdev4.1: PM: resume from 0, parent usb4 still 2
Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
done.
hub 2-0:1.0: over-current change on port 2
hub 4-0:1.0: over-current change on port 3
hub 4-0:1.0: over-current change on port 4
Stopping tasks ... done.
Suspending console(s)
usbdev4.1: PM: suspend 0->2, parent usb4 already 2
usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
usbdev3.1: PM: suspend 0->2, parent usb3 already 2
usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
usbdev2.1: PM: suspend 0->2, parent usb2 already 2
usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
usbdev1.1: PM: suspend 0->2, parent usb1 already 2
usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
pnp: Device 00:0c disabled.
pnp: Device 00:0b disabled.
pnp: Device 00:0a disabled.
ACPI: PCI interrupt for device 0000:02:02.0 disabled
ACPI: PCI interrupt for device 0000:02:01.0 disabled
ACPI: PCI interrupt for device 0000:00:1f.5 disabled
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
Disabling non-boot CPUs ...
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Back to C!
PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
PM: Writing back config space on device 0000:00:1d.0 at offset f (was 100, writing 10b)
PM: Writing back config space on device 0000:00:1d.0 at offset 8 (was 1, writing 1801)
usb usb1: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20b)
PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing 1821)
usb usb2: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 30b)
PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing 1841)
usb usb3: root hub lost power or was reset
PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.7 to 64
PM: Writing back config space on device 0000:00:1d.7 at offset f (was 400, writing 40b)
PM: Writing back config space on device 0000:00:1d.7 at offset 4 (was 0, writing c0000000)
PM: Writing back config space on device 0000:00:1d.7 at offset 1 (was 2900006, writing 2900106)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PM: Writing back config space on device 0000:00:1f.1 at offset 9 (was 0, writing 30000000)
PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800005, writing 2800007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PM: Writing back config space on device 0000:00:1f.5 at offset 1 (was 2900007, writing 2900003)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
PM: Writing back config space on device 0000:00:1f.6 at offset 1 (was 2900005, writing 2900001)
PM: Writing back config space on device 0000:02:01.0 at offset f (was ff0100, writing ff010b)
PM: Writing back config space on device 0000:02:01.0 at offset 6 (was 1, writing 8001)
PM: Writing back config space on device 0000:02:01.0 at offset 5 (was 0, writing c0200000)
PM: Writing back config space on device 0000:02:01.0 at offset 4 (was 0, writing c0220000)
PM: Writing back config space on device 0000:02:01.0 at offset 3 (was 0, writing 4008)
PM: Writing back config space on device 0000:02:01.0 at offset 1 (was 2300000, writing 2300117)
ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
pnp: Device 00:0a activated.
pnp: Device 00:0b activated.
pnp: Device 00:0c activated.
usbdev4.1_ep00: PM: resume from 0, parent usb4 still 2
usbdev4.1_ep81: PM: resume from 0, parent 4-0:1.0 still 2
usbdev4.1: PM: resume from 0, parent usb4 still 2
Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
done.
hub 2-0:1.0: over-current change on port 2
hub 4-0:1.0: over-current change on port 3
hub 4-0:1.0: over-current change on port 4
$ cat /proc/asound/cards
0 [I82801DBICH4 ]: ICH4 - Intel 82801DB-ICH4
Intel 82801DB-ICH4 with AD1981B at irq 11
$ amixer contents numid=5,iface=MIXER,name='Master Mono Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=6,iface=MIXER,name='Master Mono Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0 : values=0 | dBscale-min=-46.50dB,step=1.50dB,mute=0 numid=1,iface=MIXER,name='Master Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=off,off numid=2,iface=MIXER,name='Master Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=0,0 | dBscale-min=-46.50dB,step=1.50dB,mute=0 numid=3,iface=MIXER,name='Headphone Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=off,off numid=4,iface=MIXER,name='Headphone Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=0,0 | dBscale-min=-46.50dB,step=1.50dB,mute=0 numid=18,iface=MIXER,name='PCM Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on numid=19,iface=MIXER,name='PCM Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=15,15 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=12,iface=MIXER,name='Line Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=off,off numid=13,iface=MIXER,name='Line Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=0,0 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=14,iface=MIXER,name='CD Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=off,off numid=15,iface=MIXER,name='CD Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=0,0 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=11,iface=MIXER,name='Mic Boost (+20dB)' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=24,iface=MIXER,name='Mic Select' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Mic1' ; Item #1 'Mic2' : values=0 numid=9,iface=MIXER,name='Mic Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=10,iface=MIXER,name='Mic Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0 : values=0 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=7,iface=MIXER,name='Phone Playback Switch' ; type=BOOLEAN,access=rw------,values=1 : values=off numid=8,iface=MIXER,name='Phone Playback Volume' ; type=INTEGER,access=rw---R--,values=1,min=0,max=31,step=0 : values=0 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=16,iface=MIXER,name='Aux Playback Switch' ; type=BOOLEAN,access=rw------,values=2 : values=off,off numid=17,iface=MIXER,name='Aux Playback Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=31,step=0 : values=0,0 | dBscale-min=-34.50dB,step=1.50dB,mute=0 numid=23,iface=MIXER,name='Mono Output Select' ; type=ENUMERATED,access=rw------,values=1,items=2 ; Item #0 'Mix' ; Item #1 'Mic' : values=0 numid=20,iface=MIXER,name='Capture Source' ; type=ENUMERATED,access=rw------,values=2,items=8 ; Item #0 'Mic' ; Item #1 'CD' ; Item #2 'Video' ; Item #3 'Aux' ; Item #4 'Line' ; Item #5 'Mix' ; Item #6 'Mix Mono' ; Item #7 'Phone' : values=0,0 numid=21,iface=MIXER,name='Capture Switch' ; type=BOOLEAN,access=rw------,values=2 : values=on,on numid=22,iface=MIXER,name='Capture Volume' ; type=INTEGER,access=rw---R--,values=2,min=0,max=15,step=0 : values=0,0 | dBscale-min=0.00dB,step=1.50dB,mute=0 numid=26,iface=MIXER,name='External Amplifier' ; type=BOOLEAN,access=rw------,values=1 : values=on numid=25,iface=MIXER,name='Stereo Mic' ; type=BOOLEAN,access=rw------,values=1 : values=off $ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
Tiskni
Sdílej:
