Portál AbcLinuxu, 24. dubna 2024 22:38
18.3.2009 21:03
J1hnD1e
bash-3.2# ls -l /lib/modules/$(uname -r)/kernel/drivers/acpi celkem 260 -rw-r--r-- 1 root root 8023 8. bře 11.21 ac.ko -rw-r--r-- 1 root root 22724 8. bře 11.21 asus_acpi.ko -rw-r--r-- 1 root root 15915 8. bře 11.21 battery.ko -rw-r--r-- 1 root root 10720 8. bře 11.21 button.ko -rw-r--r-- 1 root root 7148 8. bře 11.21 container.ko -rw-r--r-- 1 root root 8402 8. bře 11.21 fan.ko -rw-r--r-- 1 root root 9575 8. bře 11.21 pci_slot.ko -rw-r--r-- 1 root root 51931 8. bře 11.21 processor.ko -rw-r--r-- 1 root root 16924 8. bře 11.21 sbs.ko -rw-r--r-- 1 root root 8696 8. bře 11.21 sbshc.ko -rw-r--r-- 1 root root 23979 8. bře 11.21 thermal.ko -rw-r--r-- 1 root root 12652 8. bře 11.21 toshiba_acpi.ko -rw-r--r-- 1 root root 24682 8. bře 11.21 video.ko -rw-r--r-- 1 root root 10513 8. bře 11.21 wmi.ko
18.3.2009 21:08
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
A co jít postupně ... co máš v /proc/acpi? U mne je ta cesta /proc/acpi/thermal_zone/THM0/temperature ... kernel 2.6.28-gentoo-r1, IBM r51e.
18.3.2009 21:12
J1hnD1e
bash-3.2# /proc/acpi/ ac_adapter/ button/ fan/ processor/ battery/ embedded_controller/ power_resource/ thermal_zone/ bash-3.2# /proc/acpi/thermal_zone/
bash-3.2# dmesg | grep ACPI BIOS-e820: 000000003ff90000 - 000000003ff9e000 (ACPI data) BIOS-e820: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS) modified: 000000003ff90000 - 000000003ff9e000 (ACPI data) modified: 000000003ff9e000 - 000000003ffe0000 (ACPI NVS) ACPI: RSDP 000FA9B0, 0024 (r2 ACPIAM) ACPI: XSDT 3FF90100, 004C (r1 MSTEST OEMXSDT 12000830 MSFT 97) ACPI: FACP 3FF90290, 00F4 (r3 MSTEST OEMFACP 12000830 MSFT 97) ACPI: DSDT 3FF905C0, 928C (r1 A0545 A0545000 0 INTL 20060113) ACPI: FACS 3FF9E000, 0040 ACPI: APIC 3FF90390, 006C (r1 MSTEST OEMAPIC 12000830 MSFT 97) ACPI: MCFG 3FF90400, 003C (r1 MSTEST OEMMCFG 12000830 MSFT 97) ACPI: OEMB 3FF9E040, 007B (r1 MSTEST AMI_OEM 12000830 MSFT 97) ACPI: HPET 3FF99850, 0038 (r1 MSTEST OEMHPET 12000830 MSFT 97) ACPI: Local APIC address 0xfee00000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. ACPI: HPET id: 0x8086a202 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information ACPI: Core revision 20080926 ACPI: Checking initramfs for custom DSDT ACPI: bus type pci registered ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG area at e0000000 reserved in ACPI motherboard resources ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 *14 15) ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 12, should be 0D [20080926] PCI: Using ACPI for IRQ routing pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: SSDT 3FF9E0C0, 0184 (r1 AMI CPU1PM 1 INTL 20060113) processor ACPI_CPU:00: registered as cooling_device0 ACPI: SSDT 3FF9E250, 013A (r1 AMI CPU2PM 1 INTL 20060113) processor ACPI_CPU:01: registered as cooling_device1 parport_pc 00:0a: reported by Plug and Play ACPI ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] ACPI: Device needs an ACPI driver
18.3.2009 22:06
vencour | skóre: 56
| blog: Tady je Vencourovo
| Praha+západní Čechy
Hmmm ... co vidim já ...
$ ls /proc/acpi/ ac_adapter battery debug_layer dsdt event fan info processor thermal_zone alarm button debug_level embedded_controller fadt ibm power_resource sleep wakeupa v kernelu mam v /power/acpi zaškrtnutý deprecated i future. Jestli potřebujete nějaký patche nebo ebuildy, třeba někdo doplní?
A co takhle nainstalovat balicek lm_sensors.
Ten ma v sobe perlovy skript lm_detect. Tento script si osaha vsechny senzory a napise prehledny report.
------
A nebo si precist tenhle clanek:
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.