Přihlášení | Registrace

napište » Zprávičky

inzerujte » Pracovní nabídky

MagPi 140 a HackSpace 77

dnes 04:44 | Nová verze

Nová čísla časopisů od nakladatelství Raspberry Pi: MagPi 140 (pdf) a HackSpace 77 (pdf).

Ladislav Hagara | Komentářů: 0

ESPHome 2024.4.0

dnes 01:00 | Nová verze

ESPHome, tj. open source systém umožňující nastavovat zařízení s čipy ESP (i dalšími) pomocí konfiguračních souborů a připojit je do domácí automatizace, například do Home Assistantu, byl vydán ve verzi 2024.4.0.

Ladislav Hagara | Komentářů: 0

Open Platform for Enterprise AI (OPEA)

včera 22:11 | IT novinky

LF AI & Data Foundation patřící pod Linux Foundation spustila Open Platform for Enterprise AI (OPEA).

Ladislav Hagara | Komentářů: 0

OpenXR 1.1

včera 20:55 | Nová verze

Neziskové průmyslové konsorcium Khronos Group vydalo verzi 1.1 specifikace OpenXR (Wikipedie), tj. standardu specifikujícího přístup k platformám a zařízením pro XR, tj. platformám a zařízením pro AR (rozšířenou realitu) a VR (virtuální realitu). Do základu se z rozšíření dostalo XR_EXT_local_floor. Společnost Collabora implementuje novou verzi specifikace do platformy Monado, tj. open source implementace OpenXR.

Ladislav Hagara | Komentářů: 2

mpv 0.38.0

včera 17:22 | Nová verze

Byla vydána nová verze 0.38.0 multimediálního přehrávače mpv (Wikipedie) vycházejícího z přehrávačů MPlayer a mplayer2. Přehled novinek, změn a oprav na GitHubu. Požadován je FFmpeg 4.4 nebo novější a také libplacebo 6.338.2 nebo novější.

Ladislav Hagara | Komentářů: 5

ClamAV 1.3.1, 1.2.3 a 1.0.6

včera 17:11 | Nová verze

ClamAV (Wikipedie), tj. multiplatformní antivirový engine s otevřeným zdrojovým kódem pro detekci trojských koní, virů, malwaru a dalších škodlivých hrozeb, byl vydán ve verzích 1.3.1, 1.2.3 a 1.0.6. Ve verzi 1.3.1 je mimo jiné řešena bezpečnostní chyba CVE-2024-20380.

Ladislav Hagara | Komentářů: 2

Mobilní aplikace Portál občana je ode dneška oficiálně venku

včera 12:11 | IT novinky

Digitální a informační agentura (DIA) oznámila (PDF, X a Facebook), že mobilní aplikace Portál občana je ode dneška oficiálně venku.

Ladislav Hagara | Komentářů: 8

#HACKUJBRNO 2024

včera 05:11 | Komunita

#HACKUJBRNO 2024, byly zveřejněny výsledky a výstupy hackathonu města Brna nad otevřenými městskými daty, který se konal 13. a 14. dubna 2024.

Ladislav Hagara | Komentářů: 2

Volla Tablet na Kickstarteru

17.4. 17:55 | IT novinky

Společnost Volla Systeme stojící za telefony Volla spustila na Kickstarteru kampaň na podporu tabletu Volla Tablet s Volla OS nebo Ubuntu Touch.

Ladislav Hagara | Komentářů: 3

Robot HD Atlas šel do důchodu. Nastupuje nová vylepšená elektrická varianta

17.4. 17:44 | IT novinky

Společnost Boston Dynamics oznámila, že humanoidní hydraulický robot HD Atlas šel do důchodu (YouTube). Nastupuje nová vylepšená elektrická varianta (YouTube).

Ladislav Hagara | Komentářů: 1

Centrum | Napsat | Starší

navrhněte » Anketa

KDE Plasma 6

už používám (68%)

čekám, až se dostane do mé distibuce (10%)

čekám na pozdější vydání v řadě (2%)

preferuji jiné desktopové prostředí (19%)

Celkem 560 hlasů

Komentářů: 4, poslední 6.4. 15:51

Rozcestník

AbcLinuxu

HDmag.cz

AbcLinuxu:/ Poradna / Linuxová poradna / CentOS 5.2 + memory upgrade => udev timeout

Štítky: AAC, ACPI, ahci, AMD, BIND, bitmap, bridge, cat, CD-ROM, CentOS, clo, DHCP, disk, distribuce, DNS, driver, duplex, DVD-RAM, ext3, filesystem, find, framework, GNU/Linux, GPG, hardware, hash, HTML, image, init, initrd, input, Intel, Internet, IPsec, kernel, Linux, LSM, msi, PATA, PC, PCI, RAID, RAM, řadiče, SATA, sběrnice, SCSI, server, sítě, SMP, software, souborové systémy, TCP, top, traffic, udev, upgrade, USB, VIA, web

Dotaz: CentOS 5.2 + memory upgrade => udev timeout

6.5.2009 09:47 Monty
CentOS 5.2 + memory upgrade => udev timeout

Přečteno: 353×

Odpovědět | Admin

Ahoj vespolek,

mám server s CentOS 5.2. Původně se 4GB. Po rozšíření paměti na 8GB počítač najednou strašně zlenivěl, udev mu místo cca. minuty trvá i přes 10 minut (někdy timeoutuje). Pro jistotu jsem zkusil přidat stejné paměti jako tam už byly a i jiné - u obou druhů to má za následek pomalost

uname -a

Linux nana2 2.6.18-53.el5 #1 SMP Mon Nov 12 02:14:55 EST 2007 x86_64 x86_64 x86_64 GNU/Linux

Přitom top normálně úkáže 8GB, paměť jsem testoval pomocí memtesteru a ten žádnou chybu nehlásí. Netušíte někdo čím by to mohlo být?

cat /var/log/messages

May 3 04:02:03 nana2 syslogd 1.4.1: restart. May 6 09:24:13 nana2 shutdown[9273]: shutting down for system halt May 6 09:24:13 nana2 init: Switching to runlevel: 0 May 6 09:24:21 nana2 xinetd[2819]: Exiting... May 6 09:24:21 nana2 auditd[2496]: The audit daemon is exiting. May 6 09:24:21 nana2 kernel: audit(1241594661.992:6221): audit_pid=0 old=2496 by auid=4294967295 May 6 09:24:22 nana2 kernel: Kernel logging (proc) stopped. May 6 09:24:22 nana2 kernel: Kernel log daemon terminating. May 6 09:24:23 nana2 exiting on signal 15 May 6 10:02:32 nana2 syslogd 1.4.1: restart. May 6 10:02:32 nana2 kernel: klogd 1.4.1, log source = /proc/kmsg started. May 6 10:02:32 nana2 kernel: Linux version 2.6.18-53.el5 (mockbuild@builder6.centos.org) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Mon Nov 12 02:14:55 EST 2007 May 6 10:02:32 nana2 kernel: Command line: ro root=LABEL=/ May 6 10:02:32 nana2 kernel: BIOS-provided physical RAM map: May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000000100000 - 00000000cfa17000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfa17000 - 00000000cfa19000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfa19000 - 00000000cfafe000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfafe000 - 00000000cfbe5000 (ACPI NVS) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbe5000 - 00000000cfbe9000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbe9000 - 00000000cfbf3000 (ACPI data) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbf3000 - 00000000cfbf4000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbf4000 - 00000000cfbff000 (ACPI data) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfbff000 - 00000000cfc00000 (usable) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000f0000000 - 00000000f8000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) May 6 10:02:32 nana2 kernel: BIOS-e820: 0000000100000000 - 000000022c000000 (usable) May 6 10:02:32 nana2 kernel: DMI 2.4 present. May 6 10:02:33 nana2 kernel: No NUMA configuration found May 6 10:02:33 nana2 kernel: Faking a node at 0000000000000000-000000022c000000 May 6 10:02:33 nana2 kernel: Bootmem setup node 0 0000000000000000-000000022c000000 May 6 10:02:33 nana2 kernel: Memory for crash kernel (0x0 to 0x0) notwithin permissible range May 6 10:02:33 nana2 kernel: disabling kdump May 6 10:02:33 nana2 kernel: ACPI: PM-Timer IO Port: 0x408 May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) May 6 10:02:33 nana2 kernel: Processor #0 6:15 APIC version 20 May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) May 6 10:02:33 nana2 kernel: ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) May 6 10:02:33 nana2 kernel: ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) May 6 10:02:33 nana2 kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) May 6 10:02:33 nana2 kernel: IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 May 6 10:02:33 nana2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) May 6 10:02:33 nana2 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) May 6 10:02:33 nana2 kernel: Setting APIC routing to physical flat May 6 10:02:33 nana2 kernel: Using ACPI (MADT) for SMP configuration information May 6 10:02:33 nana2 kernel: Nosave address range: 000000000009e000 - 000000000009f000 May 6 10:02:33 nana2 kernel: Nosave address range: 000000000009f000 - 00000000000a0000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000000a0000 - 00000000000e0000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000000e0000 - 0000000000100000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfa17000 - 00000000cfa19000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfafe000 - 00000000cfbe5000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfbe9000 - 00000000cfbf3000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfbf4000 - 00000000cfbff000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000cfc00000 - 00000000d0000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000d0000000 - 00000000f0000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000f0000000 - 00000000f8000000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000f8000000 - 00000000fff00000 May 6 10:02:33 nana2 kernel: Nosave address range: 00000000fff00000 - 0000000100000000 May 6 10:02:33 nana2 kernel: Allocating PCI resources starting at d2000000 (gap: d0000000:20000000) May 6 10:02:33 nana2 kernel: SMP: Allowing 4 CPUs, 3 hotplug CPUs May 6 10:02:33 nana2 kernel: Built 1 zonelists. Total pages: 2047016 May 6 10:02:33 nana2 kernel: Kernel command line: ro root=LABEL=/ May 6 10:02:33 nana2 kernel: Initializing CPU#0 May 6 10:02:33 nana2 kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) May 6 10:02:33 nana2 kernel: Console: colour VGA+ 80x25 May 6 10:02:33 nana2 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) May 6 10:02:33 nana2 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) May 6 10:02:33 nana2 kernel: Checking aperture... May 6 10:02:33 nana2 kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) May 6 10:02:33 nana2 kernel: Placing software IO TLB between 0x1c3b000 - 0x5c3b000 May 6 10:02:33 nana2 kernel: Memory: 8105980k/9109504k available (2434k kernel code, 211588k reserved, 1235k data, 192k init) May 6 10:02:33 nana2 kernel: Calibrating delay using timer specific routine.. 4802.06 BogoMIPS (lpj=2401033) May 6 10:02:33 nana2 kernel: Security Framework v1.0.0 initialized May 6 10:02:33 nana2 kernel: SELinux: Initializing. May 6 10:02:33 nana2 kernel: selinux_register_security: Registering secondary module capability May 6 10:02:33 nana2 kernel: Capability LSM initialized as secondary May 6 10:02:33 nana2 kernel: Mount-cache hash table entries: 256 May 6 10:02:33 nana2 kernel: CPU: L1 I cache: 32K, L1 D cache: 32K May 6 10:02:33 nana2 kernel: CPU: L2 cache: 4096K May 6 10:02:33 nana2 kernel: using mwait in idle threads. May 6 10:02:33 nana2 kernel: CPU: Physical Processor ID: 0 May 6 10:02:33 nana2 kernel: CPU: Processor Core ID: 0 May 6 10:02:33 nana2 kernel: CPU0: Thermal monitoring enabled (TM2) May 6 10:02:33 nana2 kernel: SMP alternatives: switching to UP code May 6 10:02:33 nana2 kernel: ACPI: Core revision 20060707 May 6 10:02:33 nana2 kernel: Using local APIC timer interrupts. May 6 10:02:33 nana2 kernel: result 16667479 May 6 10:02:33 nana2 kernel: Detected 16.667 MHz APIC timer. May 6 10:02:33 nana2 kernel: Brought up 1 CPUs May 6 10:02:33 nana2 kernel: testing NMI watchdog ... OK. May 6 10:02:33 nana2 kernel: time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer. May 6 10:02:33 nana2 kernel: time.c: Detected 2400.116 MHz processor. May 6 10:02:33 nana2 kernel: checking if image is initramfs... it is May 6 10:02:33 nana2 kernel: Freeing initrd memory: 2389k freed May 6 10:02:33 nana2 kernel: NET: Registered protocol family 16 May 6 10:02:33 nana2 kernel: ACPI: bus type pci registered May 6 10:02:33 nana2 kernel: PCI: Using MMCONFIG at f0000000 May 6 10:02:33 nana2 kernel: ACPI: Interpreter enabled May 6 10:02:33 nana2 kernel: ACPI: Using IOAPIC for interrupt routing May 6 10:02:33 nana2 kernel: ACPI: PCI Root Bridge [PCI0] (0000:00) May 6 10:02:33 nana2 kernel: PCI: Transparent bridge - 0000:00:1e.0 May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 *10 11 12) May 6 10:02:33 nana2 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12) May 6 10:02:34 nana2 kernel: Linux Plug and Play Support v0.97 (c) Adam Belay May 6 10:02:34 nana2 kernel: pnp: PnP ACPI init May 6 10:02:34 nana2 kernel: pnp: PnP ACPI: found 10 devices May 6 10:02:34 nana2 kernel: usbcore: registered new driver usbfs May 6 10:02:34 nana2 kernel: usbcore: registered new driver hub May 6 10:02:34 nana2 kernel: PCI: Using ACPI for IRQ routing May 6 10:02:34 nana2 kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report May 6 10:02:34 nana2 kernel: NetLabel: Initializing May 6 10:02:34 nana2 kernel: NetLabel: domain hash size = 128 May 6 10:02:34 nana2 kernel: NetLabel: protocols = UNLABELED CIPSOv4 May 6 10:02:34 nana2 kernel: NetLabel: unlabeled traffic allowed by default May 6 10:02:34 nana2 kernel: PCI-GART: No AMD northbridge found. May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x500-0x53f has been reserved May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x400-0x47f could not be reserved May 6 10:02:34 nana2 kernel: pnp: 00:06: ioport range 0x680-0x6ff has been reserved May 6 10:02:34 nana2 kernel: PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0 May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:01.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e0000000-e1ffffff May 6 10:02:34 nana2 kernel: PREFETCH window: d0000000-dfffffff May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2300000-e23fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.1 May 6 10:02:34 nana2 kernel: IO window: 1000-1fff May 6 10:02:34 nana2 kernel: MEM window: e2100000-e21fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.2 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2400000-e24fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.3 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2500000-e25fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1c.4 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2600000-e26fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: PCI: Bridge: 0000:00:1e.0 May 6 10:02:34 nana2 kernel: IO window: disabled. May 6 10:02:34 nana2 kernel: MEM window: e2000000-e20fffff May 6 10:02:34 nana2 kernel: PREFETCH window: disabled. May 6 10:02:34 nana2 kernel: GSI 16 sharing vector 0xA9 and IRQ 16 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.0 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 17 sharing vector 0xB1 and IRQ 17 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:34 nana2 kernel: GSI 18 sharing vector 0xB9 and IRQ 18 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 20 (level, low) -> IRQ 185 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.2 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 19 sharing vector 0xC1 and IRQ 19 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.3 (0000 -> 0002) May 6 10:02:34 nana2 kernel: GSI 20 sharing vector 0xC9 and IRQ 20 May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 201 May 6 10:02:34 nana2 kernel: PCI: Enabling device 0000:00:1c.4 (0000 -> 0002) May 6 10:02:34 nana2 kernel: ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:34 nana2 kernel: NET: Registered protocol family 2 May 6 10:02:34 nana2 kernel: IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) May 6 10:02:34 nana2 kernel: TCP established hash table entries: 262144 (order: 10, 4194304 bytes) May 6 10:02:34 nana2 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) May 6 10:02:34 nana2 kernel: TCP: Hash tables configured (established 262144 bind 65536) May 6 10:02:34 nana2 kernel: TCP reno registered May 6 10:02:34 nana2 kernel: audit: initializing netlink socket (disabled) May 6 10:02:34 nana2 kernel: audit(1241603400.881:1): initialized May 6 10:02:34 nana2 kernel: Total HugeTLB memory allocated, 0 May 6 10:02:34 nana2 kernel: VFS: Disk quotas dquot_6.5.1 May 6 10:02:34 nana2 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) May 6 10:02:34 nana2 kernel: Initializing Cryptographic API May 6 10:02:34 nana2 kernel: ksign: Installing public key data May 6 10:02:34 nana2 kernel: Loading keyring May 6 10:02:34 nana2 kernel: - Added public key FA719CFD42DF8150 May 6 10:02:34 nana2 kernel: - User ID: CentOS (Kernel Module GPG key) May 6 10:02:34 nana2 kernel: io scheduler noop registered May 6 10:02:34 nana2 kernel: io scheduler anticipatory registered May 6 10:02:34 nana2 kernel: io scheduler deadline registered May 6 10:02:34 nana2 kernel: io scheduler cfq registered (default) May 6 10:02:34 nana2 kernel: assign_interrupt_mode Found MSI capability May 6 10:02:34 nana2 last message repeated 5 times May 6 10:02:34 nana2 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5 May 6 10:02:34 nana2 kernel: ACPI: Processor [CPU0] (supports 8 throttling states) May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x2 May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x3 May 6 10:02:34 nana2 kernel: ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] May 6 10:02:34 nana2 kernel: ACPI: Getting cpuindex for acpiid 0x4 May 6 10:02:34 nana2 kernel: Real Time Clock Driver v1.12ac May 6 10:02:34 nana2 kernel: Non-volatile memory driver v1.2 May 6 10:02:34 nana2 kernel: Linux agpgart interface v0.101 (c) Dave Jones May 6 10:02:34 nana2 kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled May 6 10:02:34 nana2 kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A May 6 10:02:34 nana2 kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize May 6 10:02:34 nana2 kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 May 6 10:02:34 nana2 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx May 6 10:02:34 nana2 kernel: ide-floppy driver 0.99.newide May 6 10:02:34 nana2 kernel: usbcore: registered new driver hiddev May 6 10:02:34 nana2 kernel: usbcore: registered new driver usbhid May 6 10:02:34 nana2 kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver May 6 10:02:34 nana2 kernel: PNP: No PS/2 controller found. Probing ports directly. May 6 10:02:34 nana2 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1 May 6 10:02:34 nana2 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12 May 6 10:02:34 nana2 kernel: mice: PS/2 mouse device common for all mice May 6 10:02:34 nana2 kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 May 6 10:02:34 nana2 kernel: md: bitmap version 4.39 May 6 10:02:34 nana2 kernel: TCP bic registered May 6 10:02:34 nana2 kernel: Initializing IPsec netlink socket May 6 10:02:34 nana2 kernel: NET: Registered protocol family 1 May 6 10:02:34 nana2 kernel: NET: Registered protocol family 17 May 6 10:02:35 nana2 kernel: ACPI: (supports S0 S1 S3 S4 S5) May 6 10:02:35 nana2 kernel: Freeing unused kernel memory: 192k freed May 6 10:02:35 nana2 kernel: Write protecting the kernel read-only data: 468k May 6 10:02:35 nana2 kernel: USB Universal Host Controller Interface driver v3.0 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.0: irq 193, io base 0x000020e0 May 6 10:02:35 nana2 kernel: usb usb1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 1-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 1-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: GSI 21 sharing vector 0x4A and IRQ 21 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 74 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.1: irq 74, io base 0x000020c0 May 6 10:02:35 nana2 kernel: usb usb2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 2-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 2-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1a.2: irq 177, io base 0x000020a0 May 6 10:02:35 nana2 kernel: usb usb3: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 3-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 3-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: usb 1-1: new low speed USB device using uhci_hcd and address 2 May 6 10:02:35 nana2 kernel: GSI 22 sharing vector 0x52 and IRQ 22 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 82 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.0: irq 82, io base 0x00002080 May 6 10:02:35 nana2 kernel: usb usb4: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 4-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 4-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 201 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.1: irq 201, io base 0x00002060 May 6 10:02:35 nana2 kernel: usb usb5: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: usb 1-1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 5-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 5-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input0 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Keyboard [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input1 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Mouse [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 May 6 10:02:35 nana2 kernel: uhci_hcd 0000:00:1d.2: irq 193, io base 0x00002040 May 6 10:02:35 nana2 kernel: usb usb6: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 6-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 6-0:1.0: 2 ports detected May 6 10:02:35 nana2 kernel: usb 4-2: new low speed USB device using uhci_hcd and address 2 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: EHCI Host Controller May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 7 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: debug port 1 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: irq 177, io mem 0xe2225c00 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 6 10:02:35 nana2 kernel: usb usb7: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 7-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 7-0:1.0: 6 ports detected May 6 10:02:35 nana2 kernel: usb 4-2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input2 May 6 10:02:35 nana2 kernel: input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 82 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: EHCI Host Controller May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8 May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input3 May 6 10:02:35 nana2 kernel: input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: debug port 1 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: irq 82, io mem 0xe2225800 May 6 10:02:35 nana2 kernel: ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 May 6 10:02:35 nana2 kernel: usb usb8: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: hub 8-0:1.0: USB hub found May 6 10:02:35 nana2 kernel: hub 8-0:1.0: 6 ports detected May 6 10:02:35 nana2 kernel: usb 1-1: USB disconnect, address 2 May 6 10:02:35 nana2 kernel: usb 1-1: new low speed USB device using uhci_hcd and address 3 May 6 10:02:35 nana2 kernel: usb 1-1: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: SCSI subsystem initialized May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input4 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Keyboard [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: input: Cypress PS2toUSB KBM Bridge V2.02a as /class/input/input5 May 6 10:02:35 nana2 kernel: input: USB HID v1.00 Mouse [Cypress PS2toUSB KBM Bridge V2.02a] on usb-0000:00:1a.0-1 May 6 10:02:35 nana2 kernel: ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 21 (level, low) -> IRQ 74 May 6 10:02:35 nana2 kernel: usb 4-2: USB disconnect, address 2 May 6 10:02:35 nana2 kernel: usb 4-2: new low speed USB device using uhci_hcd and address 3 May 6 10:02:35 nana2 kernel: usb 4-2: configuration #1 chosen from 1 choice May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input6 May 6 10:02:35 nana2 kernel: input: USB HID v1.10 Keyboard [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: input: Chicony USB Keyboard as /class/input/input7 May 6 10:02:35 nana2 kernel: input,hiddev96: USB HID v1.10 Device [Chicony USB Keyboard] on usb-0000:00:1d.0-2 May 6 10:02:35 nana2 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode May 6 10:02:35 nana2 kernel: ahci 0000:00:1f.2: flags: 64bit ncq led clo pmp pio slum part May 6 10:02:35 nana2 kernel: scsi0 : ahci May 6 10:02:35 nana2 kernel: scsi1 : ahci May 6 10:02:35 nana2 kernel: scsi2 : ahci May 6 10:02:35 nana2 kernel: scsi3 : ahci May 6 10:02:35 nana2 kernel: scsi4 : ahci May 6 10:02:35 nana2 kernel: scsi5 : ahci May 6 10:02:35 nana2 kernel: ata1: SATA max UDMA/133 cmd 0xffffc2000002c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata2: SATA max UDMA/133 cmd 0xffffc2000002c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata3: SATA max UDMA/133 cmd 0xffffc2000002c200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata4: SATA max UDMA/133 cmd 0xffffc2000002c280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata5: SATA max UDMA/133 cmd 0xffffc2000002c300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata6: SATA max UDMA/133 cmd 0xffffc2000002c380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 90 May 6 10:02:35 nana2 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 6 10:02:35 nana2 kernel: ata1.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 May 6 10:02:35 nana2 kernel: ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) May 6 10:02:35 nana2 kernel: ata1.00: configured for UDMA/133 May 6 10:02:35 nana2 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) May 6 10:02:35 nana2 kernel: ata2.00: ATA-7: ST3250310AS, 3.AAC, max UDMA/133 May 6 10:02:35 nana2 kernel: ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) May 6 10:02:35 nana2 kernel: ata2.00: configured for UDMA/133 May 6 10:02:35 nana2 kernel: ata3: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata4: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata5: SATA link down (SStatus 0 SControl 300) May 6 10:02:35 nana2 kernel: ata6: SATA link down (SStatus 0 SControl 300) May 6 10:02:36 nana2 kernel: Vendor: ATA Model: ST3250310AS Rev: 3.AA May 6 10:02:36 nana2 kernel: Type: Direct-Access ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sda: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sda: drive cache: write back May 6 10:02:36 nana2 kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sda: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sda: drive cache: write back May 6 10:02:36 nana2 kernel: sda: sda1 sda2 sda3 May 6 10:02:36 nana2 kernel: sd 0:0:0:0: Attached scsi disk sda May 6 10:02:36 nana2 kernel: Vendor: ATA Model: ST3250310AS Rev: 3.AA May 6 10:02:36 nana2 kernel: Type: Direct-Access ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sdb: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sdb: drive cache: write back May 6 10:02:36 nana2 kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) May 6 10:02:36 nana2 kernel: sdb: Write Protect is off May 6 10:02:36 nana2 kernel: SCSI device sdb: drive cache: write back May 6 10:02:36 nana2 kernel: sdb: sdb1 May 6 10:02:36 nana2 kernel: sd 1:0:0:0: Attached scsi disk sdb May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 177 May 6 10:02:36 nana2 kernel: scsi6 : pata_marvell May 6 10:02:36 nana2 kernel: scsi7 : pata_marvell May 6 10:02:36 nana2 kernel: ata7: PATA max UDMA/100 cmd 0x0000000000011018 ctl 0x0000000000011026 bmdma 0x0000000000011000 irq 177 May 6 10:02:36 nana2 kernel: ata8: DUMMY May 6 10:02:36 nana2 kernel: BAR5:00:00 01:7F 02:22 03:CA 04:00 05:00 06:00 07:00 08:00 09:00 0A:00 0B:00 0C:01 0D:00 0E:00 0F:00 May 6 10:02:36 nana2 kernel: ata7.00: ATAPI, max UDMA/66 May 6 10:02:36 nana2 kernel: ata7.00: configured for UDMA/66 May 6 10:02:36 nana2 kernel: Vendor: ASUS Model: DRW-2014L1 Rev: 1.00 May 6 10:02:36 nana2 kernel: Type: CD-ROM ANSI SCSI revision: 05 May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: SELinux: Disabled at runtime. May 6 10:02:36 nana2 kernel: audit(1241603413.647:2): selinux=0 auid=4294967295 May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 18 (level, low) -> IRQ 193 May 6 10:02:36 nana2 kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 May 6 10:02:36 nana2 kernel: input: PC Speaker as /class/input/input8 May 6 10:02:36 nana2 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0 May 6 10:02:36 nana2 kernel: sd 1:0:0:0: Attached scsi generic sg1 type 0 May 6 10:02:36 nana2 kernel: scsi 6:0:0:0: Attached scsi generic sg2 type 5 May 6 10:02:36 nana2 kernel: Intel(R) PRO/1000 Network Driver - 0.2.0 May 6 10:02:36 nana2 kernel: Copyright (c) 1999-2007 Intel Corporation. May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 20 (level, low) -> IRQ 185 May 6 10:02:36 nana2 kernel: pci0000:00: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:2a:f3:cf May 6 10:02:36 nana2 kernel: pci0000:00: eth0: Intel(R) PRO/1000 Network Connection May 6 10:02:36 nana2 kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray May 6 10:02:36 nana2 kernel: Uniform CD-ROM driver Revision: 3.20 May 6 10:02:36 nana2 kernel: GSI 23 sharing vector 0x62 and IRQ 23 May 6 10:02:36 nana2 kernel: ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 98 May 6 10:02:36 nana2 kernel: hda-intel: no codecs found! May 6 10:02:36 nana2 kernel: ACPI: PCI interrupt for device 0000:00:1b.0 disabled May 6 10:02:36 nana2 kernel: FDC 0 is a National Semiconductor PC87306 May 6 10:02:36 nana2 kernel: lp: driver loaded but no devices found May 6 10:02:36 nana2 kernel: ACPI: Power Button (FF) [PWRF] May 6 10:02:36 nana2 kernel: ACPI: Sleep Button (CM) [SLPB] May 6 10:02:36 nana2 kernel: ibm_acpi: ec object not found May 6 10:02:36 nana2 kernel: md: Autodetecting RAID arrays. May 6 10:02:36 nana2 kernel: md: autorun ... May 6 10:02:36 nana2 kernel: md: ... autorun DONE. May 6 10:02:36 nana2 kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com May 6 10:02:36 nana2 kernel: device-mapper: multipath: version 1.0.5 loaded May 6 10:02:36 nana2 kernel: EXT3 FS on sda1, internal journal May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3 FS on sda3, internal journal May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: kjournald starting. Commit interval 5 seconds May 6 10:02:36 nana2 kernel: EXT3 FS on sdb1, internal journal May 6 10:02:36 nana2 kernel: EXT3-fs: mounted filesystem with ordered data mode. May 6 10:02:36 nana2 kernel: loop: loaded (max 8 devices) May 6 10:02:36 nana2 kernel: Adding 12586916k swap on /dev/sda2. Priority:-1 extents:1 across:12586916k May 6 10:02:36 nana2 kernel: IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com> May 6 10:02:36 nana2 kernel: ip_tables: (C) 2000-2006 Netfilter Core Team May 6 10:02:36 nana2 kernel: Netfilter messages via NETLINK v0.30. May 6 10:02:36 nana2 kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack May 6 10:02:36 nana2 kernel: pci0000:00: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX May 6 10:02:36 nana2 kernel: pci0000:00: eth0: 10/100 speed: disabling TSO May 6 10:04:24 nana2 kernel: vmmon: module license 'unspecified' taints kernel. May 6 10:06:00 nana2 kernel: bridge-eth0: already up May 6 10:06:03 nana2 vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0 May 6 10:06:03 nana2 vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. May 6 10:06:03 nana2 vmnet-dhcpd: All rights reserved. May 6 10:06:03 nana2 vmnet-dhcpd: May 6 10:06:03 nana2 vmnet-dhcpd: Please contribute if you find this software useful. May 6 10:06:03 nana2 vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html May 6 10:06:03 nana2 vmnet-dhcpd: May 6 10:06:03 nana2 vmnet-dhcpd: Configured subnet: 192.168.217.0 May 6 10:06:03 nana2 vmnet-dhcpd: Setting vmnet-dhcp IP address: 192.168.217.254 May 6 10:06:04 nana2 vmnet-dhcpd: Recving on VNet/vmnet1/192.168.217.0 May 6 10:06:04 nana2 vmnet-dhcpd: Sending on VNet/vmnet1/192.168.217.0 May 6 10:06:10 nana2 vmnet-dhcpd: Internet Software Consortium DHCP Server 2.0 May 6 10:06:10 nana2 vmnet-dhcpd: Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. May 6 10:06:10 nana2 vmnet-dhcpd: All rights reserved. May 6 10:06:10 nana2 vmnet-dhcpd: May 6 10:06:10 nana2 vmnet-dhcpd: Please contribute if you find this software useful. May 6 10:06:10 nana2 vmnet-dhcpd: For info, please visit http://www.isc.org/dhcp-contrib.html May 6 10:06:10 nana2 vmnet-dhcpd: May 6 10:06:10 nana2 vmnet-dhcpd: Configured subnet: 172.16.192.0 May 6 10:06:10 nana2 vmnet-dhcpd: Setting vmnet-dhcp IP address: 172.16.192.254 May 6 10:06:10 nana2 vmnet-dhcpd: Recving on VNet/vmnet8/172.16.192.0 May 6 10:06:10 nana2 vmnet-dhcpd: Sending on VNet/vmnet8/172.16.192.0 May 6 10:06:46 nana2 automount[2548]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master May 6 10:07:02 nana2 xinetd[2609]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in. May 6 10:07:02 nana2 xinetd[2609]: Started working: 2 available services May 6 10:07:03 nana2 gpm[2624]: *** info [startup.c(95)]: May 6 10:07:03 nana2 gpm[2624]: Started gpm successfully. Entered daemon mode.