Byl vydán TrueNAS SCALE 24.04 “Dragonfish”. Přehled novinek této open source storage platformy postavené na Debianu v poznámkách k vydání.
Oznámeny byly nové Raspberry Pi Compute Module 4S. Vedle původní 1 GB varianty jsou nově k dispozici také varianty s 2 GB, 4 GB a 8 GB paměti. Compute Modules 4S mají na rozdíl od Compute Module 4 tvar a velikost Compute Module 3+ a předchozích. Lze tak provést snadný upgrade.
Po roce vývoje od vydání verze 1.24.0 byla vydána nová stabilní verze 1.26.0 webového serveru a reverzní proxy nginx (Wikipedie). Nová verze přináší řadu novinek. Podrobný přehled v souboru CHANGES-1.26.
Byla vydána nová verze 6.2 živé linuxové distribuce Tails (The Amnesic Incognito Live System), jež klade důraz na ochranu soukromí uživatelů a anonymitu. Přehled změn v příslušném seznamu. Tor Browser byl povýšen na verzi 13.0.14.
Byla vydána nová verze 30.0.0 frameworku pro vývoj multiplatformních desktopových aplikací pomocí JavaScriptu, HTML a CSS Electron (Wikipedie, GitHub). Chromium bylo aktualizováno na verzi 124.0.6367.49, V8 na verzi 12.4 a Node.js na verzi 20.11.1. Electron byl původně vyvíjen pro editor Atom pod názvem Atom Shell. Dnes je na Electronu postavena celá řada dalších aplikací.
Byla vydána nová verze 9.0.0 otevřeného emulátoru procesorů a virtualizačního nástroje QEMU (Wikipedie). Přispělo 220 vývojářů. Provedeno bylo více než 2 700 commitů. Přehled úprav a nových vlastností v seznamu změn.
Evropský parlament dnes přijal směrnici týkající se tzv. práva spotřebitele na opravu. Poslanci ji podpořili 584 hlasy (3 bylo proti a 14 se zdrželo hlasování). Směrnice ujasňuje povinnosti výrobců opravovat zboží a motivovat spotřebitele k tomu, aby si výrobky nechávali opravit a prodloužili tak jejich životnost.
Bylo oznámeno (cs) vydání Fedora Linuxu 40. Přehled novinek ve Fedora Workstation 40 a Fedora KDE 40 na stránkách Fedora Magazinu. Současně byl oznámen notebook Slimbook Fedora 2.
ČTK (Česká tisková kancelář) upozorňuje (X), že na jejím zpravodajském webu České noviny byly dnes dopoledne neznámým útočníkem umístěny dva smyšlené texty, které nepocházejí z její produkce. Jde o text s titulkem „BIS zabránila pokusu o atentát na nově zvoleného slovenského prezidenta Petra Pelligriniho“ a o údajné mimořádné prohlášení ministra Lipavského k témuž. Tyto dezinformace byly útočníky zveřejněny i s příslušnými notifikacemi v mobilní aplikaci Českých novin. ČTK ve svém zpravodajském servisu žádnou informaci v tomto znění nevydala.
Byla založena nadace Open Home Foundation zastřešující více než 240 projektů, standardů, ovladačů a knihoven (Home Assistant, ESPHome, Zigpy, Piper, Improv Wi-Fi, Wyoming, …) pro otevřenou chytrou domácnost s důrazem na soukromí, možnost výběru a udržitelnost.
AbcLinuxu.cz
ITBiz.cz
HDmag.cz
AbcPráce.cz
The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (2.6.32-24-generic) or it failed to
load. Please recompile the kernel module and install it by
sudo /etc/init.d/vboxdrv setup
You will not be able to start VMs until this problem is fixed.
Rekompilace modulu proběhne bez problémů a spuštění VirtualBoxu také. Vše funguje až do restartu. Pak se modul opět nenačte. Tuší někdo, co s tím?
sudo /sbin/depmod - dlouze "přemýšlí", ale provede
sudo modprobe vboxdrv - okamžitě a bez problémů
VirtualBox pak také bez problémů. Ale opět jen do restartu. 
Každopádně pokrok - tohle je rychlejší než sudo /etc/init.d/vboxdrv setup
/etc/init.d/vboxdrv start jsem obdržel výpis
* Starting VirtualBox kernel module * modprobe vboxdrv failed. Please use 'dmesg' to find out whyTak jsem zadal požadovaný příkaz. Řekl bych, že VirtualBoxu se týká pouze poslední řádek, ale raději to sem dávám celé:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-24-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #41-Ubuntu SMP Thu Aug 19 01:38:40 UTC 2010 (Ubuntu 2.6.32-24.41-generic 2.6.32.15+drm33.5)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=11e3f793-d58e-4cc2-b2fe-2329743ebf18 ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bf6df000 - 00000000bf700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0xbf6d0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DBFFF uncachable
[ 0.000000] DC000-DFFFF write-back
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BF700000 mask FFFF00000 uncachable
[ 0.000000] 3 base 0BF800000 mask FFF800000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000001000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (usable)
[ 0.000000] modified: 0000000000001000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009f000 (usable)
[ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000d2000 - 00000000000d4000 (reserved)
[ 0.000000] modified: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bf6d0000 (usable)
[ 0.000000] modified: 00000000bf6d0000 - 00000000bf6df000 (ACPI data)
[ 0.000000] modified: 00000000bf6df000 - 00000000bf700000 (ACPI NVS)
[ 0.000000] modified: 00000000bf700000 - 00000000c0000000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] modified: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] modified: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bf6d0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bf600000 page 2M
[ 0.000000] 00bf600000 - 00bf6d0000 page 4k
[ 0.000000] kernel direct mapping tables up to bf6d0000 @ 8000-d000
[ 0.000000] RAMDISK: 377fd000 - 37fef294
[ 0.000000] ACPI: RSDP 00000000000f67e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000bf6d13c7 0008C (v01 LENOVO TP-79 00002170 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000bf6d1500 000F4 (v03 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 (20090903/tbfadt-526)
[ 0.000000] ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 (20090903/tbfadt-557)
[ 0.000000] ACPI: DSDT 00000000bf6d185e 0D3C2 (v01 LENOVO TP-79 00002170 MSFT 0100000E)
[ 0.000000] ACPI: FACS 00000000bf6f4000 00040
[ 0.000000] ACPI: SSDT 00000000bf6d16b4 001AA (v01 LENOVO TP-79 00002170 MSFT 0100000E)
[ 0.000000] ACPI: ECDT 00000000bf6dec20 00052 (v01 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI: TCPA 00000000bf6dec72 00032 (v02 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI: APIC 00000000bf6deca4 00068 (v01 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI: MCFG 00000000bf6ded0c 0003C (v01 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI: HPET 00000000bf6ded48 00038 (v01 LENOVO TP-79 00002170 LNVO 00000001)
[ 0.000000] ACPI: SLIC 00000000bf6dee62 00176 (v01 LENOVO TP-79 00002170 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000bf6defd8 00028 (v01 LENOVO TP-79 00002170 LTP 00000001)
[ 0.000000] ACPI: SSDT 00000000bf6f2655 0025F (v01 LENOVO TP-79 00002170 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bf6f28b4 000A6 (v01 LENOVO TP-79 00002170 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bf6f295a 004F7 (v01 LENOVO TP-79 00002170 INTL 20050513)
[ 0.000000] ACPI: SSDT 00000000bf6f2e51 001D8 (v01 LENOVO TP-79 00002170 INTL 20050513)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bf6d0000
[ 0.000000] Bootmem setup node 0 0000000000000000-00000000bf6d0000
[ 0.000000] NODE_DATA [000000000000b000 - 000000000000ffff]
[ 0.000000] bootmap [0000000000010000 - 0000000000027edf] pages 18
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 00bf6d0000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a2fe64] TEXT DATA BSS ==> [0001000000 - 0001a2fe64]
[ 0.000000] #3 [00377fd000 - 0037fef294] RAMDISK ==> [00377fd000 - 0037fef294]
[ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #5 [0001a30000 - 0001a3014c] BRK ==> [0001a30000 - 0001a3014c]
[ 0.000000] #6 [0000008000 - 000000b000] PGTABLE ==> [0000008000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6810] f6810
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff880002000000-ffff8800049fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00100000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000001
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bf6d0
[ 0.000000] On node 0 totalpages: 783978
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 103 pages reserved
[ 0.000000] DMA zone: 3835 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10664 pages used for memmap
[ 0.000000] DMA32 zone: 769320 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000001000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:30000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001c00000 s91544 r8192 d23144 u1048576
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 773155
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-24-generic root=UUID=11e3f793-d58e-4cc2-b2fe-2329743ebf18 ro
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3073860k/3136320k available (5422k kernel code, 408k absent, 62052k reserved, 2979k data, 880k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:424
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 31457280 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1828.194 MHz processor.
[ 0.010008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3656.38 BogoMIPS (lpj=18281940)
[ 0.010153] Security Framework initialized
[ 0.010231] AppArmor: AppArmor initialized
[ 0.010765] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.014252] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.020863] Mount-cache hash table entries: 256
[ 0.021119] Initializing cgroup subsys ns
[ 0.021178] Initializing cgroup subsys cpuacct
[ 0.021235] Initializing cgroup subsys memory
[ 0.021297] Initializing cgroup subsys devices
[ 0.021353] Initializing cgroup subsys freezer
[ 0.021408] Initializing cgroup subsys net_cls
[ 0.021488] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.021577] CPU: L2 cache: 2048K
[ 0.021631] CPU 0/0x0 -> Node 0
[ 0.021685] CPU: Physical Processor ID: 0
[ 0.021739] CPU: Processor Core ID: 0
[ 0.021794] mce: CPU supports 6 MCE banks
[ 0.021857] CPU0: Thermal monitoring enabled (TM2)
[ 0.021916] using mwait in idle threads.
[ 0.021970] Performance Events: Core2 events, Intel PMU driver.
[ 0.022099] ... version: 2
[ 0.022153] ... bit width: 40
[ 0.022207] ... generic registers: 2
[ 0.022261] ... value mask: 000000ffffffffff
[ 0.022317] ... max period: 000000007fffffff
[ 0.022373] ... fixed-purpose events: 3
[ 0.022426] ... event mask: 0000000700000003
[ 0.025480] ACPI: Core revision 20090903
[ 0.050010] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.050071] ftrace: allocating 22527 entries in 89 pages
[ 0.060073] Setting APIC routing to flat
[ 0.060506] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.167812] CPU0: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
[ 0.170000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.020000] CPU: L2 cache: 2048K
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.020000] CPU1: Thermal monitoring enabled (TM2)
[ 0.320124] CPU1: Intel(R) Core(TM)2 CPU T5600 @ 1.83GHz stepping 06
[ 0.320617] checking TSC synchronization [CPU#0 -> CPU#1]:
[ 0.330000] Measured 565939 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.330000] Marking TSC unstable due to check_tsc_sync_source failed
[ 0.330022] Brought up 2 CPUs
[ 0.330077] Total of 2 processors activated (7312.68 BogoMIPS).
[ 0.330632] CPU0 attaching sched-domain:
[ 0.330636] domain 0: span 0-1 level MC
[ 0.330639] groups: 0 1
[ 0.330647] CPU1 attaching sched-domain:
[ 0.330649] domain 0: span 0-1 level MC
[ 0.330652] groups: 1 0
[ 0.330762] devtmpfs: initialized
[ 0.330762] regulator: core version 0.5
[ 0.330762] Time: 10:48:01 Date: 08/20/10
[ 0.330762] NET: Registered protocol family 16
[ 0.330762] Trying to unpack rootfs image as initramfs...
[ 0.330762] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.330762] ACPI: bus type pci registered
[ 0.330762] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.330762] PCI: MCFG area at f0000000 reserved in E820
[ 0.331952] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.332009] PCI: Using configuration type 1 for base access
[ 0.340159] bio: create slab {bio-0} at 0
[ 0.341803] ACPI: EC: EC description table is found, configuring boot EC
[ 0.352200] ACPI: Interpreter enabled
[ 0.352200] ACPI: (supports S0 S3 S4 S5)
[ 0.352200] ACPI: Using IOAPIC for interrupt routing
[ 0.362599] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.362723] ACPI: Power Resource [PUBS] (on)
[ 0.371812] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.372361] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.372532] pci 0000:00:02.0: reg 10 32bit mmio: [0xee100000-0xee17ffff]
[ 0.372538] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.372543] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.372549] pci 0000:00:02.0: reg 1c 32bit mmio: [0xee200000-0xee23ffff]
[ 0.372595] pci 0000:00:02.1: reg 10 32bit mmio: [0xee180000-0xee1fffff]
[ 0.372725] pci 0000:00:1b.0: reg 10 64bit mmio: [0xee240000-0xee243fff]
[ 0.372791] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.372856] pci 0000:00:1b.0: PME# disabled
[ 0.373009] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.373070] pci 0000:00:1c.0: PME# disabled
[ 0.373227] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.373288] pci 0000:00:1c.1: PME# disabled
[ 0.373443] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.373505] pci 0000:00:1c.2: PME# disabled
[ 0.373661] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.373723] pci 0000:00:1c.3: PME# disabled
[ 0.373850] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.373921] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.373990] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.374059] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.374137] pci 0000:00:1d.7: reg 10 32bit mmio: [0xee444000-0xee4443ff]
[ 0.374205] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.374267] pci 0000:00:1d.7: PME# disabled
[ 0.374508] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.374583] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.374645] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f)
[ 0.374723] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f)
[ 0.374800] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f)
[ 0.374931] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.374940] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.374948] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.374957] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.374965] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.375035] pci 0000:00:1f.2: reg 10 io port: [0x18d0-0x18d7]
[ 0.375043] pci 0000:00:1f.2: reg 14 io port: [0x18c4-0x18c7]
[ 0.375052] pci 0000:00:1f.2: reg 18 io port: [0x18c8-0x18cf]
[ 0.375060] pci 0000:00:1f.2: reg 1c io port: [0x18c0-0x18c3]
[ 0.375068] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.375076] pci 0000:00:1f.2: reg 24 32bit mmio: [0xee444400-0xee4447ff]
[ 0.375115] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.375177] pci 0000:00:1f.2: PME# disabled
[ 0.375306] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.375490] pci 0000:02:00.0: reg 10 32bit mmio: [0xee000000-0xee01ffff]
[ 0.375516] pci 0000:02:00.0: reg 18 io port: [0x2000-0x201f]
[ 0.375627] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.375750] pci 0000:02:00.0: PME# disabled
[ 0.375949] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff]
[ 0.375955] pci 0000:00:1c.0: bridge 32bit mmio: [0xee000000-0xee0fffff]
[ 0.376150] pci 0000:03:00.0: reg 10 32bit mmio: [0xedf00000-0xedf00fff]
[ 0.376398] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.376469] pci 0000:03:00.0: PME# disabled
[ 0.376641] pci 0000:00:1c.1: bridge io port: [0x3000-0x4fff]
[ 0.376646] pci 0000:00:1c.1: bridge 32bit mmio: [0xec000000-0xedffffff]
[ 0.376655] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xe4000000-0xe40fffff]
[ 0.376719] pci 0000:00:1c.2: bridge io port: [0x5000-0x6fff]
[ 0.376725] pci 0000:00:1c.2: bridge 32bit mmio: [0xe8000000-0xe9ffffff]
[ 0.376733] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xe4100000-0xe41fffff]
[ 0.376799] pci 0000:00:1c.3: bridge io port: [0x7000-0x8fff]
[ 0.376804] pci 0000:00:1c.3: bridge 32bit mmio: [0xea000000-0xebffffff]
[ 0.376813] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xe4200000-0xe42fffff]
[ 0.376869] pci 0000:15:00.0: reg 10 32bit mmio: [0xe4300000-0xe4300fff]
[ 0.376900] pci 0000:15:00.0: supports D1 D2
[ 0.376902] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.376965] pci 0000:15:00.0: PME# disabled
[ 0.377097] pci 0000:00:1e.0: transparent bridge
[ 0.377156] pci 0000:00:1e.0: bridge io port: [0x9000-0xcfff]
[ 0.377161] pci 0000:00:1e.0: bridge 32bit mmio: [0xe4300000-0xe7ffffff]
[ 0.377169] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xe0000000-0xe3ffffff]
[ 0.377235] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.377401] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.377477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.377550] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.377632] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.377713] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.383389] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.384008] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.384623] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.385231] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.385846] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.386456] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.387062] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.387664] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.388241] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.388331] vgaarb: loaded
[ 0.388514] SCSI subsystem initialized
[ 0.400339] libata version 3.00 loaded.
[ 0.400339] usbcore: registered new interface driver usbfs
[ 0.400339] usbcore: registered new interface driver hub
[ 0.400360] usbcore: registered new device driver usb
[ 0.400608] ACPI: WMI: Mapper loaded
[ 0.400662] PCI: Using ACPI for IRQ routing
[ 0.401162] NetLabel: Initializing
[ 0.401216] NetLabel: domain hash size = 128
[ 0.401272] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.401344] NetLabel: unlabeled traffic allowed by default
[ 0.401454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.401652] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.410033] Switching to clocksource hpet
[ 0.412282] AppArmor: AppArmor Filesystem Enabled
[ 0.412363] pnp: PnP ACPI init
[ 0.412437] ACPI: bus type pnp registered
[ 0.417522] pnp: PnP ACPI: found 14 devices
[ 0.417579] ACPI: ACPI bus type pnp unregistered
[ 0.417652] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.417713] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.417773] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.417832] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.417892] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.417952] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.418015] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.418076] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.418137] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.418198] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.418260] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.418321] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.418386] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.418461] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.418535] system 00:00: iomem range 0xfed41000-0xffffffff could not be reserved
[ 0.418616] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.418676] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.418737] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.418797] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.418857] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.418947] system 00:02: ioport range 0x1600-0x165f could not be reserved
[ 0.419008] system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.419071] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.419133] system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.419194] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.419255] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.424153] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.424215] pci 0000:00:1c.0: IO window: 0x2000-0x2fff
[ 0.424278] pci 0000:00:1c.0: MEM window: 0xee000000-0xee0fffff
[ 0.424340] pci 0000:00:1c.0: PREFETCH window: 0x000000c0000000-0x000000c01fffff
[ 0.424420] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.424482] pci 0000:00:1c.1: IO window: 0x3000-0x4fff
[ 0.424544] pci 0000:00:1c.1: MEM window: 0xec000000-0xedffffff
[ 0.424605] pci 0000:00:1c.1: PREFETCH window: 0x000000e4000000-0x000000e40fffff
[ 0.424685] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.424749] pci 0000:00:1c.2: IO window: 0x5000-0x6fff
[ 0.424811] pci 0000:00:1c.2: MEM window: 0xe8000000-0xe9ffffff
[ 0.424872] pci 0000:00:1c.2: PREFETCH window: 0x000000e4100000-0x000000e41fffff
[ 0.424953] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:0c
[ 0.425012] pci 0000:00:1c.3: IO window: 0x7000-0x8fff
[ 0.425073] pci 0000:00:1c.3: MEM window: 0xea000000-0xebffffff
[ 0.425137] pci 0000:00:1c.3: PREFETCH window: 0x000000e4200000-0x000000e42fffff
[ 0.425219] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[ 0.425278] pci 0000:15:00.0: IO window: 0x009000-0x0090ff
[ 0.425341] pci 0000:15:00.0: IO window: 0x009400-0x0094ff
[ 0.425403] pci 0000:15:00.0: PREFETCH window: 0xe0000000-0xe3ffffff
[ 0.425467] pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.425529] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[ 0.425588] pci 0000:00:1e.0: IO window: 0x9000-0xcfff
[ 0.425651] pci 0000:00:1e.0: MEM window: 0xe4300000-0xe7ffffff
[ 0.425713] pci 0000:00:1e.0: PREFETCH window: 0x000000e0000000-0x000000e3ffffff
[ 0.425809] alloc irq_desc for 20 on node -1
[ 0.425811] alloc kstat_irqs on node -1
[ 0.425819] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.425884] pci 0000:00:1c.0: setting latency timer to 64
[ 0.425897] alloc irq_desc for 21 on node -1
[ 0.425899] alloc kstat_irqs on node -1
[ 0.425902] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.425967] pci 0000:00:1c.1: setting latency timer to 64
[ 0.425978] alloc irq_desc for 22 on node -1
[ 0.425979] alloc kstat_irqs on node -1
[ 0.425983] pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 0.426045] pci 0000:00:1c.2: setting latency timer to 64
[ 0.426056] alloc irq_desc for 23 on node -1
[ 0.426058] alloc kstat_irqs on node -1
[ 0.426061] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.426124] pci 0000:00:1c.3: setting latency timer to 64
[ 0.426131] pci 0000:00:1e.0: enabling device (0005 -> 0007)
[ 0.426194] pci 0000:00:1e.0: setting latency timer to 64
[ 0.426208] alloc irq_desc for 16 on node -1
[ 0.426210] alloc kstat_irqs on node -1
[ 0.426214] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.426281] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.426284] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.426287] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.426290] pci_bus 0000:02: resource 1 mem: [0xee000000-0xee0fffff]
[ 0.426293] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xc01fffff]
[ 0.426295] pci_bus 0000:03: resource 0 io: [0x3000-0x4fff]
[ 0.426298] pci_bus 0000:03: resource 1 mem: [0xec000000-0xedffffff]
[ 0.426301] pci_bus 0000:03: resource 2 pref mem [0xe4000000-0xe40fffff]
[ 0.426304] pci_bus 0000:04: resource 0 io: [0x5000-0x6fff]
[ 0.426306] pci_bus 0000:04: resource 1 mem: [0xe8000000-0xe9ffffff]
[ 0.426309] pci_bus 0000:04: resource 2 pref mem [0xe4100000-0xe41fffff]
[ 0.426311] pci_bus 0000:0c: resource 0 io: [0x7000-0x8fff]
[ 0.426314] pci_bus 0000:0c: resource 1 mem: [0xea000000-0xebffffff]
[ 0.426317] pci_bus 0000:0c: resource 2 pref mem [0xe4200000-0xe42fffff]
[ 0.426319] pci_bus 0000:15: resource 0 io: [0x9000-0xcfff]
[ 0.426322] pci_bus 0000:15: resource 1 mem: [0xe4300000-0xe7ffffff]
[ 0.426324] pci_bus 0000:15: resource 2 pref mem [0xe0000000-0xe3ffffff]
[ 0.426327] pci_bus 0000:15: resource 3 io: [0x00-0xffff]
[ 0.426329] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.426332] pci_bus 0000:16: resource 0 io: [0x9000-0x90ff]
[ 0.426335] pci_bus 0000:16: resource 1 io: [0x9400-0x94ff]
[ 0.426337] pci_bus 0000:16: resource 2 pref mem [0xe0000000-0xe3ffffff]
[ 0.426340] pci_bus 0000:16: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.426385] NET: Registered protocol family 2
[ 0.426662] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.428334] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.434651] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.435463] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.435523] TCP reno registered
[ 0.435725] NET: Registered protocol family 1
[ 0.435804] pci 0000:00:02.0: Boot video device
[ 0.435992] Simple Boot Flag at 0x35 set to 0x1
[ 0.436271] Scanning for low memory corruption every 60 seconds
[ 0.436503] audit: initializing netlink socket (disabled)
[ 0.436571] type=2000 audit(1282301280.430:1): initialized
[ 0.447741] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.449453] VFS: Disk quotas dquot_6.5.2
[ 0.449567] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.450345] fuse init (API version 7.13)
[ 0.450493] msgmni has been set to 6003
[ 0.450794] alg: No test for stdrng (krng)
[ 0.450910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.451716] io scheduler noop registered
[ 0.451769] io scheduler anticipatory registered
[ 0.451825] io scheduler deadline registered
[ 0.451920] io scheduler cfq registered (default)
[ 0.452173] alloc irq_desc for 24 on node -1
[ 0.452175] alloc kstat_irqs on node -1
[ 0.452189] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.452202] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.452368] alloc irq_desc for 25 on node -1
[ 0.452370] alloc kstat_irqs on node -1
[ 0.452379] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.452390] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.452558] alloc irq_desc for 26 on node -1
[ 0.452560] alloc kstat_irqs on node -1
[ 0.452569] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.452581] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.452746] alloc irq_desc for 27 on node -1
[ 0.452748] alloc kstat_irqs on node -1
[ 0.452758] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.452769] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.452881] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.453564] pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
[ 0.453693] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.453718] pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
[ 0.453833] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.453856] pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 27d4 ss_vid 0 ss_did 0
[ 0.453971] pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
[ 0.453994] pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
[ 0.454112] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.454122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.454427] ACPI: AC Adapter [AC] (on-line)
[ 0.454578] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.454838] ACPI: Lid Switch [LID]
[ 0.454949] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[ 0.455030] ACPI: Sleep Button [SLPB]
[ 0.455142] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.455216] ACPI: Power Button [PWRF]
[ 0.456018] ACPI: SSDT 00000000bf6f1d36 00240 (v01 PmRef Cpu0Ist 00000100 INTL 20050513)
[ 0.456885] ACPI: SSDT 00000000bf6f1ffb 0065A (v01 PmRef Cpu0Cst 00000100 INTL 20050513)
[ 0.460228] Monitor-Mwait will be used to enter C-1 state
[ 0.460272] Monitor-Mwait will be used to enter C-2 state
[ 0.460300] Monitor-Mwait will be used to enter C-3 state
[ 0.460360] processor LNXCPU:00: registered as cooling_device0
[ 0.460847] ACPI: SSDT 00000000bf6f1c6e 000C8 (v01 PmRef Cpu1Ist 00000100 INTL 20050513)
[ 0.461496] ACPI: SSDT 00000000bf6f1f76 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513)
[ 0.482739] processor LNXCPU:01: registered as cooling_device1
[ 0.488734] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.488802] ACPI: Thermal Zone [THM0] (75 C)
[ 0.490444] thermal LNXTHERM:02: registered as thermal_zone1
[ 0.490509] ACPI: Thermal Zone [THM1] (77 C)
[ 0.492260] Linux agpgart interface v0.103
[ 0.492359] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.492559] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.493051] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.494326] brd: module loaded
[ 0.494932] loop: module loaded
[ 0.495088] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.495298] ata_piix 0000:00:1f.1: version 2.13
[ 0.495315] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
[ 0.495421] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.495538] scsi0 : ata_piix
[ 0.495668] scsi1 : ata_piix
[ 0.496521] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.496583] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.497073] Fixed MDIO Bus: probed
[ 0.497165] PPP generic driver version 2.4.2
[ 0.497265] tun: Universal TUN/TAP device driver, 1.6
[ 0.497325] tun: (C) 1999-2004 Max Krasnyansky {maxk@qualcomm.com}
[ 0.497484] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.497798] ata2: port disabled. ignoring.
[ 0.502814] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.503240] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.503308] alloc irq_desc for 19 on node -1
[ 0.503311] alloc kstat_irqs on node -1
[ 0.503320] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.503402] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.503406] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.503576] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.503676] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.503775] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.507746] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.507768] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xee444000
[ 0.520909] ACPI: Battery Slot [BAT0] (battery present)
[ 0.530034] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.530249] usb usb1: configuration #1 chosen from 1 choice
[ 0.530340] hub 1-0:1.0: USB hub found
[ 0.530404] hub 1-0:1.0: 8 ports detected
[ 0.530545] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.530627] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.530968] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.531202] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.531271] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.531339] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.531344] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.531457] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.531577] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001820
[ 0.531742] usb usb2: configuration #1 chosen from 1 choice
[ 0.531826] hub 2-0:1.0: USB hub found
[ 0.531890] hub 2-0:1.0: 2 ports detected
[ 0.531998] alloc irq_desc for 17 on node -1
[ 0.532001] alloc kstat_irqs on node -1
[ 0.532008] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.532076] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.532080] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.532174] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.532282] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001840
[ 0.532439] usb usb3: configuration #1 chosen from 1 choice
[ 0.532523] hub 3-0:1.0: USB hub found
[ 0.532584] hub 3-0:1.0: 2 ports detected
[ 0.532869] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 0.533105] uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0
[ 0.533172] alloc irq_desc for 18 on node -1
[ 0.533174] alloc kstat_irqs on node -1
[ 0.533179] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.533244] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.533248] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.533342] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.533453] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.533617] usb usb4: configuration #1 chosen from 1 choice
[ 0.533703] hub 4-0:1.0: USB hub found
[ 0.533763] hub 4-0:1.0: 2 ports detected
[ 0.533871] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.533936] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.533940] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.534029] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.534129] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001880
[ 0.534289] usb usb5: configuration #1 chosen from 1 choice
[ 0.534373] hub 5-0:1.0: USB hub found
[ 0.534433] hub 5-0:1.0: 2 ports detected
[ 0.534608] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.543739] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.543810] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.544069] mice: PS/2 mouse device common for all mice
[ 0.544290] rtc_cmos 00:07: RTC can wake from S4
[ 0.544392] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.544484] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.544710] device-mapper: uevent: version 1.0.3
[ 0.544903] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.545060] device-mapper: multipath: version 1.1.0 loaded
[ 0.545119] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.545440] cpuidle: using governor ladder
[ 0.545619] cpuidle: using governor menu
[ 0.546068] TCP cubic registered
[ 0.546258] NET: Registered protocol family 10
[ 0.546822] lo: Disabled Privacy Extensions
[ 0.547194] NET: Registered protocol family 17
[ 0.548160] PM: Resume from disk failed.
[ 0.548174] registered taskstats version 1
[ 0.548904] Magic number: 6:362:831
[ 0.549072] rtc_cmos 00:07: setting system clock to 2010-08-20 10:48:01 UTC (1282301281)
[ 0.549149] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.549208] EDD information not available.
[ 0.552436] Freeing initrd memory: 8136k freed
[ 0.570167] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.670445] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-4083N, 1.08, max UDMA/33
[ 0.710333] ata1.00: configured for UDMA/33
[ 0.715721] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4083N 1.08 PQ: 0 ANSI: 5
[ 0.726187] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.726263] Uniform CD-ROM driver Revision: 3.20
[ 0.726439] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 0.726503] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 0.726635] Freeing unused kernel memory: 880k freed
[ 0.727138] Write protecting the kernel read-only data: 7696k
[ 0.744737] udev: starting version 151
[ 0.850077] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 0.867153] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
[ 0.867222] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 0.867402] e1000e 0000:02:00.0: Disabling L1 ASPM
[ 0.867542] e1000e 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.867647] e1000e 0000:02:00.0: setting latency timer to 64
[ 0.867842] alloc irq_desc for 28 on node -1
[ 0.867845] alloc kstat_irqs on node -1
[ 0.867866] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 0.872123] ahci 0000:00:1f.2: version 3.0
[ 0.872143] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.872249] alloc irq_desc for 29 on node -1
[ 0.872252] alloc kstat_irqs on node -1
[ 0.872263] ahci 0000:00:1f.2: irq 29 for MSI/MSI-X
[ 0.872332] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 0.872409] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 0.872473] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.872766] scsi2 : ahci
[ 0.872920] scsi3 : ahci
[ 0.873057] scsi4 : ahci
[ 0.873194] scsi5 : ahci
[ 0.873364] ata3: SATA max UDMA/133 abar m1024@0xee444400 port 0xee444500 irq 29
[ 0.873438] ata4: DUMMY
[ 0.873491] ata5: DUMMY
[ 0.873542] ata6: DUMMY
[ 0.942519] e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
[ 1.000503] usb 1-6: configuration #1 chosen from 1 choice
[ 1.000686] hub 1-6:1.0: USB hub found
[ 1.000897] hub 1-6:1.0: 4 ports detected
[ 1.034718] 0000:02:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:15:58:81:e7:5b
[ 1.035494] 0000:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.035629] 0000:02:00.0: eth0: MAC: 2, PHY: 2, PBA No: 005301-003
[ 1.220056] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.221268] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.221272] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.221348] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.222477] ata3.00: ATA-8: Hitachi HTS722012K9SA00, DCCOC54P, max UDMA/133
[ 1.222539] ata3.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.223906] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.223910] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.223986] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.225128] ata3.00: configured for UDMA/133
[ 1.242427] ata3.00: configured for UDMA/133
[ 1.242484] ata3: EH complete
[ 1.242645] scsi 2:0:0:0: Direct-Access ATA Hitachi HTS72201 DCCO PQ: 0 ANSI: 5
[ 1.242893] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.242925] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 1.242976] sd 2:0:0:0: [sda] Write Protect is off
[ 1.242979] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.243005] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.243160] sda: sda1 sda2 { sda5 }
[ 1.276923] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.330173] usb 1-6.1: new low speed USB device using ehci_hcd and address 5
[ 1.446027] usb 1-6.1: configuration #1 chosen from 1 choice
[ 1.459492] usbcore: registered new interface driver hiddev
[ 1.462685] input: Genius Navigator 335 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.0/input/input5
[ 1.462877] generic-usb 0003:0458:0072.0001: input,hidraw0: USB HID v1.00 Keyboard [Genius Navigator 335] on usb-0000:00:1d.7-6.1/input0
[ 1.468663] input: Genius Navigator 335 as /devices/pci0000:00/0000:00:1d.7/usb1/1-6/1-6.1/1-6.1:1.1/input/input6
[ 1.468861] generic-usb 0003:0458:0072.0002: input,hidraw1: USB HID v1.00 Mouse [Genius Navigator 335] on usb-0000:00:1d.7-6.1/input1
[ 1.468972] usbcore: registered new interface driver usbhid
[ 1.469038] usbhid: v2.6:USB HID core driver
[ 1.507125] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 1.507258] EXT4-fs (sda1): write access will be enabled during recovery
[ 1.720043] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 1.895405] usb 5-1: configuration #1 chosen from 1 choice
[ 2.170048] usb 5-2: new full speed USB device using uhci_hcd and address 3
[ 2.352435] usb 5-2: configuration #1 chosen from 1 choice
[ 3.702763] EXT4-fs (sda1): recovery complete
[ 3.703583] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 6.093133] Adding 4803392k swap on /dev/sda5. Priority:-1 extents:1 across:4803392k
[ 7.098145] udev: starting version 151
[ 9.378454] cfg80211: Calling CRDA to update world regulatory domain
[ 9.850317] acpi device:01: registered as cooling_device2
[ 9.850723] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 9.850868] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 9.909026] [drm] Initialized drm 1.1.0 20060810
[ 10.019344] intel_rng: FWH not detected
[ 10.109285] Bluetooth: Core ver 2.15
[ 10.109385] NET: Registered protocol family 31
[ 10.109387] Bluetooth: HCI device and connection manager initialized
[ 10.109390] Bluetooth: HCI socket layer initialized
[ 10.151312] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 10.151456] usbcore: registered new interface driver btusb
[ 10.169080] tpm_tis 00:0d: 1.2 TPM (device-id 0x3202, rev-id 5)
[ 10.177003] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 10.177629] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 10.180579] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 10.219318] lp: driver loaded but no devices found
[ 10.219533] i915 0000:00:02.0: power state changed by ACPI to D0
[ 10.219579] i915 0000:00:02.0: power state changed by ACPI to D0
[ 10.219590] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 10.219596] i915 0000:00:02.0: setting latency timer to 64
[ 10.230870] [drm] set up 7M of stolen space
[ 10.241359] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 10.257804] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input8
[ 10.305245] irda_init()
[ 10.305260] NET: Registered protocol family 23
[ 10.347105] nsc-ircc 00:0c: activated
[ 10.347110] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 10.347178] nsc-ircc, chip->init
[ 10.347192] nsc-ircc, Found chip at base=0x164e
[ 10.347233] nsc-ircc, driver loaded (Dag Brattli)
[ 10.349196] IrDA: Registered device irda0
[ 10.349199] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 10.349557] nsc-ircc, chip->init
[ 10.349576] nsc-ircc, Found chip at base=0x02e
[ 10.349616] nsc-ircc, driver loaded (Dag Brattli)
[ 10.349621] nsc_ircc_open(), can't get iobase of 0x2f8
[ 10.349637] nsc-ircc, chip->init
[ 10.352429] Non-volatile memory driver v1.3
[ 10.525126] cfg80211: World regulatory domain updated:
[ 10.525129] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 10.525133] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.525136] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.525139] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 10.525142] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.525145] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 10.544070] parport_pc 00:0b: reported by Plug and Play ACPI
[ 10.544132] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 10.620676] lp0: using parport0 (interrupt-driven).
[ 10.668322] [drm] initialized overlay support
[ 10.692148] ppdev: user-space parallel port driver
[ 10.730191] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 10.730195] iwl3945: Copyright(c) 2003-2009 Intel Corporation
[ 10.730330] iwl3945 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 10.730346] iwl3945 0000:03:00.0: setting latency timer to 64
[ 10.800230] iwl3945 0000:03:00.0: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 10.800234] iwl3945 0000:03:00.0: Detected Intel Wireless WiFi Link 3945ABG
[ 10.800352] alloc irq_desc for 30 on node -1
[ 10.800355] alloc kstat_irqs on node -1
[ 10.800389] iwl3945 0000:03:00.0: irq 30 for MSI/MSI-X
[ 11.219077] fb0: inteldrmfb frame buffer device
[ 11.219080] registered panic notifier
[ 11.219090] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 11.235070] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 11.615376] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:2012]
[ 11.615405] yenta_cardbus 0000:15:00.0: Using INTVAL to route CSC interrupts to PCI
[ 11.615407] yenta_cardbus 0000:15:00.0: Routing CardBus interrupts to PCI
[ 11.615415] yenta_cardbus 0000:15:00.0: TI: mfunc 0x01d01002, devctl 0x64
[ 11.813631] vga16fb: initializing
[ 11.813636] vga16fb: mapped to 0xffff8800000a0000
[ 11.813641] vga16fb: not registering due to another framebuffer present
[ 11.860739] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0c70, PCI irq 16
[ 11.860744] yenta_cardbus 0000:15:00.0: Socket status: 30000007
[ 11.860752] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x9000 - 0xcfff
[ 11.860756] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe4300000 - 0xe7ffffff
[ 11.860760] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xe0000000 - 0xe3ffffff
[ 12.083383] type=1505 audit(1282301293.030:2): operation="profile_load" pid=544 name="/sbin/dhclient3"
[ 12.084123] type=1505 audit(1282301293.030:3): operation="profile_load" pid=544 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 12.084521] type=1505 audit(1282301293.030:4): operation="profile_load" pid=544 name="/usr/lib/connman/scripts/dhclient-script"
[ 12.244216] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 12.244223] hda_intel: probe_mask set to 0x1 for device 17aa:2010
[ 12.244277] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 12.442337] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 13.087109] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 13.087112] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 13.087114] thinkpad_acpi: ThinkPad BIOS 79ETD7WW (2.17 ), EC 79HT50WW-1.07
[ 13.087116] thinkpad_acpi: Lenovo ThinkPad T60, model 1951FEG
[ 13.087118] thinkpad_acpi: WARNING: Outdated ThinkPad BIOS/EC firmware
[ 13.087119] thinkpad_acpi: WARNING: This firmware may be missing critical bug fixes and/or important features
[ 13.088038] thinkpad_acpi: radio switch found; radios are enabled
[ 13.088149] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 13.088152] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 13.093371] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[ 13.094321] Registered led device: tpacpi::thinklight
[ 13.094544] Registered led device: tpacpi::power
[ 13.094826] Registered led device: tpacpi::standby
[ 13.094995] Registered led device: tpacpi::thinkvantage
[ 13.097099] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one.
[ 13.097470] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 13.100763] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input10
[ 13.152883] Console: switching to colour frame buffer device 128x48
[ 14.725577] Bluetooth: L2CAP ver 2.14
[ 14.725580] Bluetooth: L2CAP socket layer initialized
[ 15.046289] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 15.046292] Bluetooth: BNEP filters: protocol multicast
[ 15.089191] Bridge firewalling registered
[ 15.341046] Bluetooth: SCO (Voice Link) ver 0.6
[ 15.341049] Bluetooth: SCO socket layer initialized
[ 15.620640] Bluetooth: RFCOMM TTY layer initialized
[ 15.620646] Bluetooth: RFCOMM socket layer initialized
[ 15.620648] Bluetooth: RFCOMM ver 1.11
[ 16.482855] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 16.542627] e1000e 0000:02:00.0: irq 28 for MSI/MSI-X
[ 16.543632] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.650872] iwl3945 0000:03:00.0: firmware: requesting iwlwifi-3945-2.ucode
[ 16.818699] iwl3945 0000:03:00.0: loaded firmware version 15.32.2.9
[ 16.889125] Registered led device: iwl-phy0::radio
[ 16.889579] Registered led device: iwl-phy0::assoc
[ 16.890013] Registered led device: iwl-phy0::RX
[ 16.890440] Registered led device: iwl-phy0::TX
[ 17.004246] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.114778] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 18.114782] 0000:02:00.0: eth0: 10/100 speed: disabling TSO
[ 18.115442] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 28.190034] eth0: no IPv6 routers present
[ 92.642553] CE: hpet increasing min_delta_ns to 15000 nsec
[ 148.364043] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
/etc/init.d/vboxdrv start pouštěl jako běžný uživatel. Teď řeším, proč se nepouští při startu
sudo update-rc.d vboxdrv defaults a dověděl se System start/stop links for /etc/init.d/vboxdrv already exist.
(Na brněnském linuxovém srazu jsme ještě zkusili tento návod, ale nenaběhla mi pak Wifi, tak to šlo zpět.
Došlo i na "důkladnější" odebrání a novou instalaci, ale stále stejný výsledek sudo /etc/init.d/vboxdrv start musím pouštět ručně)
20.8.2010 14:27
Ruža Becelin | skóre: 40
| blog: RuzaBecelinBlog
http://download.virtualbox.org/virtualbox/debian
Ať to není tak úplně do ztracena, připojuji link na jednu obsáhlejší ubuntí diskuzi na toto téma
Díky všem za pomoc
Tiskni
Sdílej:
