Dotaz: XFree 4.2.1 v DEBIANU

[#2741]

Trapim se s XFree-ckama 4.x nad Debianem. Nejak mi nejdou nastavit, tak, aby se to pustilo... Mam grafiku ATI Rage 128 PF 32Mb AGP a monitor SAMSUNG SyncMaster 753s, jo a jeste mysku Genius NetScroll Optical ( PS/2 )

Toto jsem nastavil pomoci debconfu, ale predtim jsem to zkousel i ruco...

Napiste mi mail a ja vam kdyztak poslu muj XF86Config-4 + XFree86.log

Jo a ty DIR`s s fontama opravdu existujou.

Predem diky za pomoc, protoze jsem stoprocentne presvedcen, ze se tady najde nekdo, kdo mi poradi. DIKY.

Odpovědi

[Vlastimil Ott]

Napiste mi mail a ja vam kdyztak poslu muj XF86Config-4 + XFree86.log Proč by to někdo dělal? Vy chcete informace!! Měl byste sem vložit chybová hlášení, na tohle vám nikdo nemůže odpovědět, protože je to málo informací. Takže je to na vás. --vo

[#2741]

Puvodne jsem to chtel udelat, ale kdyz jsem tu otazku psal, tak jsem dosel tomu, ze je to moc dlouhy a neprehledny. Takze to hodne zkratim a nebudu si jisty, tim, ze mi nekdo kvalitne poradi... Tak tady je to cely : 1.) XF86Config-4

Section "ServerLayout"
        Identifier     "XFree86 Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        RgbPath      "/usr/X11R6/lib/X11/rgb"
        ModulePath   "/usr/X11R6/lib/modules"
        FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
        FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
        FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "extmod"
        Load  "glx"
        Load  "pex5"
        Load  "record"
        Load  "xie"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "keyboard"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/mouse"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "SAM"
        ModelName    "SyncMaster"
        HorizSync    30.0 - 71.0
        VertRefresh  50.0 - 160.0
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: : integer, : float, : "True"/"False",
        ### : "String", : " Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # []
        #Option     "SWcursor"                  # []
        #Option     "Dac6Bit"                   # []
        #Option     "Dac8Bit"                   # []
        #Option     "ForcePCIMode"              # []
        #Option     "CCEPIOMode"                # []
        #Option     "CCENoSecurity"             # []
        #Option     "CCEusecTimeout"            # 
        #Option     "AGPMode"                   # 
        #Option     "AGPSize"                   # 
        #Option     "RingSize"                  # 
        #Option     "BufferSize"                # 
        #Option     "UseCCEfor2D"               # []
        #Option     "Display"                   # 
        #Option     "PanelWidth"                # 
        #Option     "PanelHeight"               # 
        #Option     "ProgramFPRegs"             # []
        #Option     "UseFBDev"                  # []
        #Option     "VideoKey"                  # 
        #Option     "ShowCache"                 # []
        Identifier  "Card0"
        Driver      "ati"
        VendorName  "ATI"
        BoardName   "Rage 128 Pro PF"
        BusID       "PCI:1:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Depth     1
        EndSubSection
        SubSection "Display"
                Depth     4
        EndSubSection
        SubSection "Display"
                Depth     8
        EndSubSection
        SubSection "Display"
                Depth     15
        EndSubSection
        SubSection "Display"
                Depth     16
        EndSubSection
        SubSection "Display"
                Depth     24
        EndSubSection
EndSection

2.)XFree86.log

warning: process set to nice value 0 instead of -10 as requested

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs)

XFree86 Version 4.1.0.1 / X Window System
(protocol Version 11, revision 0, vendor release 6510)
Release Date: 21 December 2001
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/FAQ)
Build Operating System: Linux 2.4.17 i686 [ELF]
Module Loader present
(==) Log file: "/var/log/XFree86.0.log", Time: Tue Jun 17 16:44:49 2003
(==) Using config file: "/etc/X11/XF86Config-4"
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist.
        Entry deleted from font path.
(WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist.
        Entry deleted from font path.
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(--) PCI:*(1:0:0) ATI Rage 128 Pro PF rev 0, Mem @ 0xd0000000/26, 0xd7000000/14, I/O @ 0x9000/8
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a
(II) Module pex5: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.13.0
(II) Loading /usr/X11R6/lib/modules/extensions/libxie.a
(II) Module xie: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 6.3.6
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) ATI: ATI driver (version 6.3.6) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI),
        ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI),
        ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI),
        ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI),
        ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI),
        ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP),
        ATI Rage 128 Mobility ML (AGP)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
        ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
        ATI Radeon VE (AGP)
(--) Chipset ATI Rage 128 Pro PF (AGP) found
(II) Loading /usr/X11R6/lib/modules/drivers/r128_drv.o
(II) Module r128: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 4.0.1
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) R128(0): PCI bus 1 card 0 func 0
(==) R128(0): Depth 8, (==) framebuffer bpp 8
(II) R128(0): Pixel depth = 8 bits stored in 1 byte (8 bpp pixmaps)
(==) R128(0): Default visual is PseudoColor
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): initializing int10
(II) R128(0): Primary V_BIOS segment is: 0xc000
(--) R128(0): Chipset: "ATI Rage 128 Pro PF (AGP)" (ChipID = 0x5046)
(--) R128(0): Linear framebuffer at 0xd0000000
(--) R128(0): MMIO registers at 0xd7000000
(--) R128(0): VideoRAM: 32768 kByte (64-bit SDR SGRAM 1:1)
(II) R128(0): PLL parameters: rf=2950 rd=65 min=12500 max=40000; xclk=12000
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) R128(0): VESA BIOS detected
(II) R128(0): VESA VBE DDC supported
(II) R128(0): Manufacturer: SAM  Model: 27  Serial#: 1095643447
(II) R128(0): Year: 2002  Week: 42
(II) R128(0): EDID Version: 1.3
(II) R128(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) R128(0): Sync:  Separate
(II) R128(0): Max H-Image Size [cm]: horiz.: 32  vert.: 24
(II) R128(0): Gamma: 2.07
(II) R128(0): DPMS capabilities: Off; RGB/Color Display
(II) R128(0): First detailed timing is preferred mode
(II) R128(0): redX: 0.645 redY: 0.321   greenX: 0.285 greenY: 0.600
(II) R128(0): blueX: 0.142 blueY: 0.057   whiteX: 0.283 whiteY: 0.298
(II) R128(0): Supported VESA Video Modes:
(II) R128(0): 720x400@70Hz
(II) R128(0): 640x480@60Hz
(II) R128(0): 640x480@75Hz
(II) R128(0): Manufacturer's mask: 0
(II) R128(0): Supported Future Video Modes:
(II) R128(0): #0: hsize: 640  vsize 480  refresh: 60  vid: 16433
(II) R128(0): #1: hsize: 640  vsize 480  refresh: 85  vid: 22833
(II) R128(0): #2: hsize: 800  vsize 600  refresh: 85  vid: 22853
(II) R128(0): #3: hsize: 1024  vsize 768  refresh: 85  vid: 22881
(II) R128(0): #4: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) R128(0): Supported additional Video Mode:
(II) R128(0): clock: 94.5 MHz   Image Size:  312 x 234 mm
(II) R128(0): h_active: 1024  h_sync: 1072  h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) R128(0): v_active: 768  v_sync: 769  v_sync_end 772 v_blanking: 808 v_border: 0
(II) R128(0): Ranges: V min: 50  V max: 160 Hz, H min: 30  H max: 71 kHz, PixClock max 110 MHz
(II) R128(0): Monitor name: SyncMaster
(II) R128(0): Serial No: HJFTA14257
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Monitor0: Using hsync range of 30.00-71.00 kHz
(II) R128(0): Monitor0: Using vrefresh range of 50.00-160.00 Hz
(II) R128(0): Clock range:  12.50 to 400.00 MHz
(II) R128(0): Not using default mode "1280x960" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1280x1024" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1600x1200" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1792x1344" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1856x1392" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1920x1440" (hsync out of range)
(II) R128(0): Not using default mode "1400x1050" (hsync out of range)
(--) R128(0): Virtual size is 1400x1050 (pitch 1408)
(**) R128(0): Default mode "1400x1050": 122.0 MHz, 64.9 kHz, 60.0 Hz
(--) R128(0): Display dimensions: (32, 24) cm
(--) R128(0): DPI set to (111, 111)
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 0.1.0
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.1.0.1, module version = 1.0.0
Symbol fbdevHWGetLineLength from module /usr/X11R6/lib/modules/drivers/r128_drv.o is unresolved!
(EE) R128(0): [dri] R128DRIScreenInit failed (depth 8 not supported).  [dri] Disabling DRI.
(II) R128(0): Memory manager initialized to (0,0) (1408,8191)
(II) R128(0): Reserved area from (0,1050) to (1408,1052)
(II) R128(0): Largest offscreen area available: 1408 x 7139
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Lines
        Dashed Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Setting up tile and stipple cache:
                32 128x128 slots
                32 256x256 slots
                16 512x512 slots
(II) R128(0): Acceleration enabled
(II) R128(0): Using hardware cursor (scanline 1052)
(II) R128(0): Largest offscreen area available: 1408 x 7137
(II) R128(0): Direct rendering disabled
PEXExtensionInit: Couldn't open default PEX font file  Roman_M
(**) Mouse0: Protocol: "auto"
(**) Mouse0: Core Pointer
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(EE) Mouse0: cannot determine the mouse protocol

Fatal server error:
could not open default font 'fixed'

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

[Robert Krátký]

no, myslim, ze bohate stacilo sem dat jen radky popisujici ty chyby. myslim, ze to z nich je docela patrne:

mas genius netscroll, takze zkus zadat jako protokol mysi 'ImPS/2'.

a pak nejde nacist font 'fixed'. takze jaky bys mohl mit problem s fonty? jsou skutecne nainstalovane v adresarich, ktere jsou v 'XF86Config-4' uvedeny ve 'FontPath'? mas nainstalovane baliky 'xfonts-base' a 'xfonts-100dpi'?

[#2741]

adresare existuji, baliky mam nainstalovane a proto jsem to sem dal cely, protoze mi bylo jasny, ze problem musi byt i jinde. Jinak diky za snahu.

[Robert Krátký]

naopak bych rekl, ze problem je prave v tom. zkus treba:

apt-get --reinstall install xfonts-base fontconfig

dale by to asi chtelo doplnit polozky 'Modes' do podsekci 'Display' v sekci 'Screen' v XF86Config-4. to proto, ze z logu to vypada, ze nastartuje-li nakonec ten xserver, tak pouzije jakesi defaultni rozliseni 1400x1050 na 65Hz...

nevim, jak je to u tvoji karty s podporou DRI, ale xserveru se nelibi, takze natahovani toho modulu se muze prozatim odkomentovat.

[Jiri Bajer]

Jeste to asi bude chtit zakomentovat radek Option "UseFBdevHW" "true" - rage a radeony to nejak nechteji brat a v logu si na to Xka stezuji. S nejvetsi pravdepodobnosti pak pojede DRI. (jeste si DRI stezuje na color depth - misto 8 bitu bych dal 24) Doporucoval bych nejdriv odstranit problem s fonty pri co nejjednodussi konfiguraci - male rozliseni a barevnost a pak se teprv zamerit na rozliseni, hloubku a akceleraci.

[#2741]

Jo uz to chodi, diky MOC.