abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×
včera 02:09 | Komunita
V listopadu přešla Wikimedia z Bugzilly na Phabricator. K migraci se v příspěvku na svém blogu vrací André Klapper. Bugzilla byla používána 10 let. Vloženo bylo 73681 oznámení. Registrováno bylo přibližně 20000 uživatelských účtů. Porovnání Bugzilly s Phabricatorem na stránkách MediaWiki.
Ladislav Hagara | Komentářů: 32
18.12. 23:04 | Zajímavý software

Dnes vyšla na Steamu linuxová verze počítačové hry. Civilization: Beyond Earth Stalo se tak necelé dva měsíce po vydání Windows verze.Díky vánoční slevové akci lze hru na Steamu do zítřejších 19 hodin koupit s 40% slevou.

menphis | Komentářů: 12
18.12. 23:03 | Pozvánky
7. a 8.3.2015 proběhne na pražském Strahově další InstallFest. Můžete posílat náměty na přednášky nebo si rovnou svoji přednášku či svůj workshop přihlásit.
Jendа | Komentářů: 0
18.12. 23:02 | Nová verze
Laboratoře CZ.NIC vydaly ostrou verzi desktopové aplikace Datovka nesoucí označení 4. Tato verze plně nahrazuje starší Datovku 3.1 napsanou v jazyce Python. Podrobnější popis Datovky 4 a informace o rozdílech a vylepšeních naleznete na stránkách projektu nebo na blogu CZ.NIC. … více »
Vilem Sladek | Komentářů: 11
18.12. 18:00 | Nová verze
Byl vydán PostgreSQL 9.4. Nejnovější verze tohoto relačního databázového systému s otevřeným zdrojovým kódem přináší celou řadu nových vlastností a vylepšení. Zdůraznit lze například podporu nového datového typu JSONB. Podrobnosti v poznámkách k vydání.
Ladislav Hagara | Komentářů: 0
18.12. 02:30 | Nová verze
Byla vydána verze 14.12.0 KDE Aplikací (KDE Applications). Většina z nich je založena na knihovnách KDE Platform 4. Některé, například Kate, KWrite nebo Konsole, jsou už ale založené na KDE Frameworks 5. Podrobnosti v kompletním seznamu změn a na stránce s dalšími informacemi. Před několika dny vyšly také knihovny KDE Frameworks 5.5.0 a prostředí KDE Plasma 5.1.2.
Ladislav Hagara | Komentářů: 23
18.12. 02:30 | Bezpečnostní upozornění
Organizace ICANN se stala terčem spear phishingového útoku, při kterém útočníci získali přístup do několika zaměstnaneckých e-mailů. Následně získali administrátorský přístup také do aplikace "Centralized Zone Data System". Z tohoto důvodu byla hesla na účtech uživatelů CZDS deaktivována a uživatelé si musí požádat o reset hesla. Zároveň se uživatelům doporučuje provést změnu hesla i v dalších systémech, pokud někde používali stejné přihlašovací údaje. [CSIRT.CZ]
Ladislav Hagara | Komentářů: 8
17.12. 15:00 | Nová verze
Po ipfwadm, ipchains a iptables přichází nftables. Subsystém pro filtrování paketů nftables se v lednu dostal do Linuxu 3.13 (zprávička). Včera vyšla verze 0.4 balíku nftables. Nejnovější verze nftables a nástroje nft přináší například podporu Linuxu 3.18 a 3.19.
Ladislav Hagara | Komentářů: 0
17.12. 13:00 | IT novinky
Google na Google+ oznámil, že jeho Dokumenty, Tabulky a Prezentace nově otevřou také soubory ve třech hlavních ODF formátech (.odt, .ods a .odp).
Ladislav Hagara | Komentářů: 3
17.12. 11:30 | Zajímavý článek
Na serveru Hack A Day byl publikován článek o domácích počítačích za železnou oponou (Home Computers Behind The Iron Curtain). Martin Malý se zde věnuje počítačům jako JPR-1, Ondra, PMD 85, IQ 151 nebo Didaktik Gama.
Ladislav Hagara | Komentářů: 49
Disketu jsem naposledy použil během
 (46%)
 (3%)
 (11%)
 (37%)
 (2%)
Celkem 1603 hlasů
 Komentářů: 54, poslední 9.12. 17:16
    Rozcestník
    Reklama
    Autoškola testy online Levný benzín

    Dotaz: Jak nastavit Postfix, aby nelogoval do syslogu?

    24.3.2012 17:57 mrtn
    Jak nastavit Postfix, aby nelogoval do syslogu?
    Přečteno: 709×
    Snažím se nastavit Postfix/syslog tak, aby nelogoval do syslogu, ale nekam jinam.

    V syslog.conf mam nastavene:

    mail.* -/var/log/mail.log

    mail.info -/var/log/mail.info mail.warn -/var/log/mail.warn mail.err /var/log/mail.err

    Do techto souboru Postfix opravdu loguje.

    Ale porad je hodne zapisu v syslogu (postfix/pickup, postfix/cleanup, postfix/qmgr), to bych chtel presunout jinam.

    zkousel jsem pridat

    mail.qmgr -/var/log/mail.qmgr mail.local -/var/log/mail.local mail.cleanup -/var/log/mail.cleanup mail.pickup -/var/log/mail.pickup

    ale nefunguje to.

    Diky za radu.

    Odpovědi

    24.3.2012 21:31 Daniel Čižinský | skóre: 28
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    "Do syslogu" je IMHO neobratné vyjádření "pomocí syslog daemona". Takže "nelogovat do syslogu" by mělo znamenat logovat někam mimo syslog daemona, např. do databáze. Pak ale čtu "syslog.conf mam nastavene", což popisuje logování pomocí syslogu. Jde tedy o to, aby to syslog zapisoval do jiného souboru?
    25.3.2012 18:35 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    "Do syslogu" je IMHO neobratné vyjádření "pomocí syslog daemona".
    asi taky, akorat u mne (Ubuntu 10.04) se ten soubor jmenuje "syslog", takze lip pojmenovat to neumim
    Takže "nelogovat do syslogu" by mělo znamenat logovat někam mimo syslog daemona, např. do databáze. Pak ale čtu "syslog.conf mam nastavene", což popisuje logování pomocí syslogu. Jde tedy o to, aby to syslog zapisoval do jiného souboru?
    ano, presne tak, do jineho souboru, nez "/var/log/syslog"
    26.3.2012 00:02 GeorgeWH | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    skus upravit riadok, kde je definovane logovanie do syslogu:
    *.*;auth,authpriv.none;mail.none          -/var/log/syslog
    
    26.3.2012 08:55 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    skus upravit riadok, kde je definovane logovanie do syslogu:
    *.*;auth,authpriv.none;mail.none          -/var/log/syslog
    
    tak bohuzel nic, loguje tam porad dal; a daemona jsem restartoval a nechal jsem nacist novy config:

    sudo /etc/init.d/sysklogd restart sudo /etc/init.d/sysklogd reload
    26.3.2012 14:16 pupu | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    'postconf syslog_facility' rika co? Jestli 'mail' a pritom mas pro /var/log/syslog opravdu nadefinovane mail.none, tak mas neco rozbiteho a budes muset ukazat celou konfiguraci syslogu.
    26.3.2012 14:23 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    'postconf syslog_facility' rika co?
    syslog_facility = mail
    Jestli 'mail' a pritom mas pro /var/log/syslog opravdu nadefinovane mail.none, tak mas neco rozbiteho a budes muset ukazat celou konfiguraci syslogu.
    #  /etc/syslog.conf	Configuration file for syslogd.
    #
    #			For more information see syslog.conf(5)
    #			manpage.
    
    #
    # First some standard logfiles.  Log by facility.
    #
    
    auth,authpriv.*			/var/log/auth.log
    *.*;auth,authpriv.none;mail.none		-/var/log/syslog
    #cron.*				/var/log/cron.log
    daemon.*			-/var/log/daemon.log
    kern.*				-/var/log/kern.log
    lpr.*				-/var/log/lpr.log
    mail.*				-/var/log/mail.log
    user.*				-/var/log/user.log
    
    #
    # Logging for the mail system.  Split it up so that
    # it is easy to write scripts to parse these files.
    #
    mail.info			-/var/log/mail.info
    mail.warn			-/var/log/mail.warn
    mail.err			-/var/log/mail.err
    # logovani postfixu zvlast
    mail.qmgr			-/var/log/mail.qmgr
    mail.local			-/var/log/mail.local
    mail.cleanup			-/var/log/mail.cleanup
    mail.pickup			-/var/log/mail.pickup
    
    
    
    # Logging for INN news system
    #
    news.crit			/var/log/news/news.crit
    news.err			/var/log/news/news.err
    news.notice			-/var/log/news/news.notice
    
    #
    # Some `catch-all' logfiles.
    #
    *.=debug;\
    	auth,authpriv.none;\
    	news.none;mail.none	-/var/log/debug
    *.=info;*.=notice;*.=warn;\
    	auth,authpriv.none;\
    	cron,daemon.none;\
    	mail,news.none		-/var/log/messages
    
    #
    # Emergencies are sent to everybody logged in.
    #
    *.emerg				*
    
    #
    # I like to have messages displayed on the console, but only on a virtual
    # console I usually leave idle.
    #
    #daemon,mail.*;\
    #	news.=crit;news.=err;news.=notice;\
    #	*.=debug;*.=info;\
    #	*.=notice;*.=warn	/dev/tty8
    
    # The named pipe /dev/xconsole is for the `xconsole' utility.  To use it,
    # you must invoke `xconsole' with the `-file' option:
    # 
    #    $ xconsole -file /dev/xconsole [...]
    #
    # NOTE: adjust the list below, or you'll go crazy if you have a reasonably
    #      busy site..
    #
    daemon.*;mail.*;\
    	news.err;\
    	*.=debug;*.=info;\
    	*.=notice;*.=warn	|/dev/xconsole
    26.3.2012 15:33 GeorgeWH | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    mne to funguje, aj ked pouzivam rsyslog, konfigy su rovnake. s akymi parametrami sa ho spustas? pripadne ho skus pustit v debugovacom mode.
    27.3.2012 06:54 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    mne to funguje, aj ked pouzivam rsyslog, konfigy su rovnake. s akymi parametrami sa ho spustas? pripadne ho skus pustit v debugovacom mode.
    > postconf -n
    alias_maps = hash:/etc/aliases
    append_dot_mydomain = no
    biff = no
    config_directory = /etc/postfix
    debug_peer_level = 5
    html_directory = /usr/share/doc/postfix/html
    inet_protocols = all
    mailbox_size_limit = 0
    message_size_limit = 102400000
    mydestination = localhost.localdomain, localhost, s01
    myhostname = s01
    notify_classes = protocol
    readme_directory = /usr/share/doc/postfix
    recipient_delimiter = +
    smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache
    smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
    smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_inet_interfaces permit_sasl_authenticated
    smtpd_sasl_security_options = 
    smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem
    smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key
    smtpd_tls_security_level = may
    smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache
    smtpd_use_tls = yes
    > postconf
    2bounce_notice_recipient = postmaster
    access_map_defer_code = 450
    access_map_reject_code = 554
    address_verify_cache_cleanup_interval = 12h
    address_verify_default_transport = $default_transport
    address_verify_local_transport = $local_transport
    address_verify_map = btree:$data_directory/verify_cache
    address_verify_negative_cache = yes
    address_verify_negative_expire_time = 3d
    address_verify_negative_refresh_time = 3h
    address_verify_poll_count = ${stress?1}${stress:3}
    address_verify_poll_delay = 3s
    address_verify_positive_expire_time = 31d
    address_verify_positive_refresh_time = 7d
    address_verify_relay_transport = $relay_transport
    address_verify_relayhost = $relayhost
    address_verify_sender = $double_bounce_sender
    address_verify_sender_dependent_default_transport_maps = $sender_dependent_default_transport_maps
    address_verify_sender_dependent_relayhost_maps = $sender_dependent_relayhost_maps
    address_verify_service_name = verify
    address_verify_transport_maps = $transport_maps
    address_verify_virtual_transport = $virtual_transport
    alias_database = hash:/etc/aliases
    alias_maps = hash:/etc/aliases
    allow_mail_to_commands = alias, forward
    allow_mail_to_files = alias, forward
    allow_min_user = no
    allow_percent_hack = yes
    allow_untrusted_routing = no
    alternate_config_directories = 
    always_add_missing_headers = no
    always_bcc = 
    anvil_rate_time_unit = 60s
    anvil_status_update_time = 600s
    append_at_myorigin = yes
    append_dot_mydomain = no
    application_event_drain_time = 100s
    authorized_flush_users = static:anyone
    authorized_mailq_users = static:anyone
    authorized_submit_users = static:anyone
    backwards_bounce_logfile_compatibility = yes
    berkeley_db_create_buffer_size = 16777216
    berkeley_db_read_buffer_size = 131072
    best_mx_transport = 
    biff = no
    body_checks = 
    body_checks_size_limit = 51200
    bounce_notice_recipient = postmaster
    bounce_queue_lifetime = 5d
    bounce_service_name = bounce
    bounce_size_limit = 50000
    bounce_template_file = 
    broken_sasl_auth_clients = no
    canonical_classes = envelope_sender, envelope_recipient, header_sender, header_recipient
    canonical_maps = 
    cleanup_service_name = cleanup
    command_directory = /usr/sbin
    command_execution_directory = 
    command_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    command_time_limit = 1000s
    config_directory = /etc/postfix
    connection_cache_protocol_timeout = 5s
    connection_cache_service_name = scache
    connection_cache_status_update_time = 600s
    connection_cache_ttl_limit = 2s
    content_filter = 
    cyrus_sasl_config_path = 
    daemon_directory = /usr/lib/postfix
    daemon_timeout = 18000s
    data_directory = /var/lib/postfix
    debug_peer_level = 5
    debug_peer_list = 
    default_database_type = hash
    default_delivery_slot_cost = 5
    default_delivery_slot_discount = 50
    default_delivery_slot_loan = 3
    default_destination_concurrency_failed_cohort_limit = 1
    default_destination_concurrency_limit = 20
    default_destination_concurrency_negative_feedback = 1
    default_destination_concurrency_positive_feedback = 1
    default_destination_rate_delay = 0s
    default_destination_recipient_limit = 50
    default_extra_recipient_limit = 1000
    default_filter_nexthop = 
    default_minimum_delivery_slots = 3
    default_privs = nobody
    default_process_limit = 100
    default_rbl_reply = $rbl_code Service unavailable; $rbl_class [$rbl_what] blocked using $rbl_domain${rbl_reason?; $rbl_reason}
    default_recipient_limit = 20000
    default_recipient_refill_delay = 5s
    default_recipient_refill_limit = 100
    default_transport = smtp
    default_verp_delimiters = +=
    defer_code = 450
    defer_service_name = defer
    defer_transports = 
    delay_logging_resolution_limit = 2
    delay_notice_recipient = postmaster
    delay_warning_time = 0h
    deliver_lock_attempts = 20
    deliver_lock_delay = 1s
    destination_concurrency_feedback_debug = no
    detect_8bit_encoding_header = yes
    disable_dns_lookups = no
    disable_mime_input_processing = no
    disable_mime_output_conversion = no
    disable_verp_bounces = no
    disable_vrfy_command = no
    dnsblog_reply_delay = 0s
    dnsblog_service_name = dnsblog
    dont_remove = 0
    double_bounce_sender = double-bounce
    duplicate_filter_limit = 1000
    empty_address_default_transport_maps_lookup_key = <>
    empty_address_recipient = MAILER-DAEMON
    empty_address_relayhost_maps_lookup_key = <>
    enable_original_recipient = yes
    error_notice_recipient = postmaster
    error_service_name = error
    execution_directory_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    expand_owner_alias = no
    export_environment = TZ MAIL_CONFIG LANG
    fallback_transport = 
    fallback_transport_maps = 
    fast_flush_domains = $relay_domains
    fast_flush_purge_time = 7d
    fast_flush_refresh_time = 12h
    fault_injection_code = 0
    flush_service_name = flush
    fork_attempts = 5
    fork_delay = 1s
    forward_expansion_filter = 1234567890!@%-_=+:,./abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ
    forward_path = $home/.forward${recipient_delimiter}${extension}, $home/.forward
    frozen_delivered_to = yes
    hash_queue_depth = 1
    hash_queue_names = deferred, defer
    header_address_token_limit = 10240
    header_checks = 
    header_size_limit = 102400
    helpful_warnings = yes
    home_mailbox = 
    hopcount_limit = 50
    html_directory = /usr/share/doc/postfix/html
    ignore_mx_lookup_error = no
    import_environment = MAIL_CONFIG MAIL_DEBUG MAIL_LOGTAG TZ XAUTHORITY DISPLAY LANG=C
    in_flow_delay = 1s
    inet_interfaces = all
    inet_protocols = all
    initial_destination_concurrency = 5
    internal_mail_filter_classes = 
    invalid_hostname_reject_code = 501
    ipc_idle = 5s
    ipc_timeout = 3600s
    ipc_ttl = 1000s
    line_length_limit = 2048
    lmtp_address_preference = ipv6
    lmtp_assume_final = no
    lmtp_bind_address = 
    lmtp_bind_address6 = 
    lmtp_body_checks = 
    lmtp_cname_overrides_servername = no
    lmtp_connect_timeout = 0s
    lmtp_connection_cache_destinations = 
    lmtp_connection_cache_on_demand = yes
    lmtp_connection_cache_time_limit = 2s
    lmtp_connection_reuse_time_limit = 300s
    lmtp_data_done_timeout = 600s
    lmtp_data_init_timeout = 120s
    lmtp_data_xfer_timeout = 180s
    lmtp_defer_if_no_mx_address_found = no
    lmtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
    lmtp_destination_concurrency_limit = $default_destination_concurrency_limit
    lmtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
    lmtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
    lmtp_destination_rate_delay = $default_destination_rate_delay
    lmtp_destination_recipient_limit = $default_destination_recipient_limit
    lmtp_discard_lhlo_keyword_address_maps = 
    lmtp_discard_lhlo_keywords = 
    lmtp_dns_resolver_options = 
    lmtp_enforce_tls = no
    lmtp_generic_maps = 
    lmtp_header_checks = 
    lmtp_host_lookup = dns
    lmtp_initial_destination_concurrency = $initial_destination_concurrency
    lmtp_lhlo_name = $myhostname
    lmtp_lhlo_timeout = 300s
    lmtp_line_length_limit = 990
    lmtp_mail_timeout = 300s
    lmtp_mime_header_checks = 
    lmtp_mx_address_limit = 5
    lmtp_mx_session_limit = 2
    lmtp_nested_header_checks = 
    lmtp_pix_workaround_delay_time = 10s
    lmtp_pix_workaround_maps = 
    lmtp_pix_workaround_threshold_time = 500s
    lmtp_pix_workarounds = disable_esmtp,delay_dotcrlf
    lmtp_quit_timeout = 300s
    lmtp_quote_rfc821_envelope = yes
    lmtp_randomize_addresses = yes
    lmtp_rcpt_timeout = 300s
    lmtp_reply_filter = 
    lmtp_rset_timeout = 20s
    lmtp_sasl_auth_cache_name = 
    lmtp_sasl_auth_cache_time = 90d
    lmtp_sasl_auth_enable = no
    lmtp_sasl_auth_soft_bounce = yes
    lmtp_sasl_mechanism_filter = 
    lmtp_sasl_password_maps = 
    lmtp_sasl_path = 
    lmtp_sasl_security_options = noplaintext, noanonymous
    lmtp_sasl_tls_security_options = $lmtp_sasl_security_options
    lmtp_sasl_tls_verified_security_options = $lmtp_sasl_tls_security_options
    lmtp_sasl_type = cyrus
    lmtp_send_xforward_command = no
    lmtp_sender_dependent_authentication = no
    lmtp_skip_5xx_greeting = yes
    lmtp_skip_quit_response = no
    lmtp_starttls_timeout = 300s
    lmtp_tcp_port = 24
    lmtp_tls_CAfile = 
    lmtp_tls_CApath = 
    lmtp_tls_block_early_mail_reply = no
    lmtp_tls_cert_file = 
    lmtp_tls_ciphers = export
    lmtp_tls_dcert_file = 
    lmtp_tls_dkey_file = $lmtp_tls_dcert_file
    lmtp_tls_eccert_file = 
    lmtp_tls_eckey_file = $lmtp_tls_eccert_file
    lmtp_tls_enforce_peername = yes
    lmtp_tls_exclude_ciphers = 
    lmtp_tls_fingerprint_cert_match = 
    lmtp_tls_fingerprint_digest = md5
    lmtp_tls_key_file = $lmtp_tls_cert_file
    lmtp_tls_loglevel = 0
    lmtp_tls_mandatory_ciphers = medium
    lmtp_tls_mandatory_exclude_ciphers = 
    lmtp_tls_mandatory_protocols = SSLv3, TLSv1
    lmtp_tls_note_starttls_offer = no
    lmtp_tls_per_site = 
    lmtp_tls_policy_maps = 
    lmtp_tls_protocols = !SSLv2
    lmtp_tls_scert_verifydepth = 9
    lmtp_tls_secure_cert_match = nexthop
    lmtp_tls_security_level = 
    lmtp_tls_session_cache_database = 
    lmtp_tls_session_cache_timeout = 3600s
    lmtp_tls_verify_cert_match = hostname
    lmtp_use_tls = no
    lmtp_xforward_timeout = 300s
    local_command_shell = 
    local_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
    local_destination_concurrency_limit = 2
    local_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
    local_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
    local_destination_rate_delay = $default_destination_rate_delay
    local_destination_recipient_limit = 1
    local_header_rewrite_clients = permit_inet_interfaces
    local_initial_destination_concurrency = $initial_destination_concurrency
    local_recipient_maps = proxy:unix:passwd.byname $alias_maps
    local_transport = local:$myhostname
    luser_relay = 
    mail_name = Postfix
    mail_owner = postfix
    mail_release_date = 20110902
    mail_spool_directory = /var/mail
    mail_version = 2.8.5
    mailbox_command = 
    mailbox_command_maps = 
    mailbox_delivery_lock = fcntl, dotlock
    mailbox_size_limit = 0
    mailbox_transport = 
    mailbox_transport_maps = 
    mailq_path = /usr/bin/mailq
    manpage_directory = /usr/share/man
    maps_rbl_domains = 
    maps_rbl_reject_code = 554
    masquerade_classes = envelope_sender, header_sender, header_recipient
    masquerade_domains = 
    masquerade_exceptions = 
    master_service_disable = 
    max_idle = 100s
    max_use = 100
    maximal_backoff_time = 4000s
    maximal_queue_lifetime = 5d
    message_reject_characters = 
    message_size_limit = 102400000
    message_strip_characters = 
    milter_command_timeout = 30s
    milter_connect_macros = j {daemon_name} v
    milter_connect_timeout = 30s
    milter_content_timeout = 300s
    milter_data_macros = i
    milter_default_action = tempfail
    milter_end_of_data_macros = i
    milter_end_of_header_macros = i
    milter_header_checks = 
    milter_helo_macros = {tls_version} {cipher} {cipher_bits} {cert_subject} {cert_issuer}
    milter_macro_daemon_name = $myhostname
    milter_macro_v = $mail_name $mail_version
    milter_mail_macros = i {auth_type} {auth_authen} {auth_author} {mail_addr} {mail_host} {mail_mailer}
    milter_protocol = 6
    milter_rcpt_macros = i {rcpt_addr} {rcpt_host} {rcpt_mailer}
    milter_unknown_command_macros = 
    mime_boundary_length_limit = 2048
    mime_header_checks = $header_checks
    mime_nesting_limit = 100
    minimal_backoff_time = 300s
    multi_instance_directories = 
    multi_instance_enable = no
    multi_instance_group = 
    multi_instance_name = 
    multi_instance_wrapper = 
    multi_recipient_bounce_reject_code = 550
    mydestination = localhost.localdomain, localhost, s01
    mydomain = localdomain
    myhostname = s01
    mynetworks = 127.0.0.0/8 192.168.3.0/24 5.0.0.0/8 7.0.0.0/24 6.0.0.0/24 [::1]/128 [fe80::%eth2]/64 [fe80::%sedmicka]/64 
    mynetworks_style = subnet
    myorigin = $myhostname
    nested_header_checks = $header_checks
    newaliases_path = /usr/bin/newaliases
    non_fqdn_reject_code = 504
    non_smtpd_milters = 
    notify_classes = protocol
    owner_request_special = yes
    parent_domain_matches_subdomains = debug_peer_list,fast_flush_domains,mynetworks,permit_mx_backup_networks,qmqpd_authorized_clients,smtpd_access_maps
    permit_mx_backup_networks = 
    pickup_service_name = pickup
    plaintext_reject_code = 450
    postmulti_control_commands = reload flush
    postmulti_start_commands = start
    postmulti_stop_commands = stop abort drain quick-stop
    postscreen_access_list = permit_mynetworks
    postscreen_bare_newline_action = ignore
    postscreen_bare_newline_enable = no
    postscreen_bare_newline_ttl = 30d
    postscreen_blacklist_action = ignore
    postscreen_cache_cleanup_interval = 12h
    postscreen_cache_map = btree:$data_directory/postscreen_cache
    postscreen_cache_retention_time = 7d
    postscreen_client_connection_count_limit = $smtpd_client_connection_count_limit
    postscreen_command_count_limit = 20
    postscreen_command_filter = 
    postscreen_command_time_limit = ${stress?10}${stress:300}s
    postscreen_disable_vrfy_command = $disable_vrfy_command
    postscreen_discard_ehlo_keyword_address_maps = $smtpd_discard_ehlo_keyword_address_maps
    postscreen_discard_ehlo_keywords = $smtpd_discard_ehlo_keywords
    postscreen_dnsbl_action = ignore
    postscreen_dnsbl_reply_map = 
    postscreen_dnsbl_sites = 
    postscreen_dnsbl_threshold = 1
    postscreen_dnsbl_ttl = 1h
    postscreen_enforce_tls = $smtpd_enforce_tls
    postscreen_expansion_filter = $smtpd_expansion_filter
    postscreen_forbidden_commands = $smtpd_forbidden_commands
    postscreen_greet_action = ignore
    postscreen_greet_banner = $smtpd_banner
    postscreen_greet_ttl = 1d
    postscreen_greet_wait = ${stress?2}${stress:6}s
    postscreen_helo_required = $smtpd_helo_required
    postscreen_non_smtp_command_action = drop
    postscreen_non_smtp_command_enable = no
    postscreen_non_smtp_command_ttl = 30d
    postscreen_pipelining_action = enforce
    postscreen_pipelining_enable = no
    postscreen_pipelining_ttl = 30d
    postscreen_post_queue_limit = $default_process_limit
    postscreen_pre_queue_limit = $default_process_limit
    postscreen_reject_footer = $smtpd_reject_footer
    postscreen_tls_security_level = $smtpd_tls_security_level
    postscreen_use_tls = $smtpd_use_tls
    postscreen_watchdog_timeout = 10s
    prepend_delivered_header = command, file, forward
    process_id_directory = pid
    propagate_unmatched_extensions = canonical, virtual
    proxy_interfaces = 
    proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $sender_bcc_maps $recipient_bcc_maps $smtp_generic_maps $lmtp_generic_maps
    proxy_write_maps = $smtp_sasl_auth_cache_name $lmtp_sasl_auth_cache_name
    proxymap_service_name = proxymap
    proxywrite_service_name = proxywrite
    qmgr_clog_warn_time = 300s
    qmgr_daemon_timeout = 1000s
    qmgr_fudge_factor = 100
    qmgr_ipc_timeout = 60s
    qmgr_message_active_limit = 20000
    qmgr_message_recipient_limit = 20000
    qmgr_message_recipient_minimum = 10
    qmqpd_authorized_clients = 
    qmqpd_client_port_logging = no
    qmqpd_error_delay = 1s
    qmqpd_timeout = 300s
    queue_directory = /var/spool/postfix
    queue_file_attribute_count_limit = 100
    queue_minfree = 0
    queue_run_delay = 300s
    queue_service_name = qmgr
    rbl_reply_maps = 
    readme_directory = /usr/share/doc/postfix
    receive_override_options = 
    recipient_bcc_maps = 
    recipient_canonical_classes = envelope_recipient, header_recipient
    recipient_canonical_maps = 
    recipient_delimiter = +
    reject_code = 554
    reject_tempfail_action = defer_if_permit
    relay_clientcerts = 
    relay_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
    relay_destination_concurrency_limit = $default_destination_concurrency_limit
    relay_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
    relay_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
    relay_destination_rate_delay = $default_destination_rate_delay
    relay_destination_recipient_limit = $default_destination_recipient_limit
    relay_domains = $mydestination
    relay_domains_reject_code = 554
    relay_initial_destination_concurrency = $initial_destination_concurrency
    relay_recipient_maps = 
    relay_transport = relay
    relayhost = 
    relocated_maps = 
    remote_header_rewrite_domain = 
    require_home_directory = no
    reset_owner_alias = no
    resolve_dequoted_address = yes
    resolve_null_domain = no
    resolve_numeric_domain = no
    rewrite_service_name = rewrite
    sample_directory = /usr/share/doc/postfix/examples
    send_cyrus_sasl_authzid = no
    sender_bcc_maps = 
    sender_canonical_classes = envelope_sender, header_sender
    sender_canonical_maps = 
    sender_dependent_default_transport_maps = 
    sender_dependent_relayhost_maps = 
    sendmail_path = /usr/sbin/sendmail
    service_throttle_time = 60s
    setgid_group = postdrop
    show_user_unknown_table_name = yes
    showq_service_name = showq
    smtp_address_preference = ipv6
    smtp_always_send_ehlo = yes
    smtp_bind_address = 
    smtp_bind_address6 = 
    smtp_body_checks = 
    smtp_cname_overrides_servername = no
    smtp_connect_timeout = 30s
    smtp_connection_cache_destinations = 
    smtp_connection_cache_on_demand = yes
    smtp_connection_cache_time_limit = 2s
    smtp_connection_reuse_time_limit = 300s
    smtp_data_done_timeout = 600s
    smtp_data_init_timeout = 120s
    smtp_data_xfer_timeout = 180s
    smtp_defer_if_no_mx_address_found = no
    smtp_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
    smtp_destination_concurrency_limit = $default_destination_concurrency_limit
    smtp_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
    smtp_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
    smtp_destination_rate_delay = $default_destination_rate_delay
    smtp_destination_recipient_limit = $default_destination_recipient_limit
    smtp_discard_ehlo_keyword_address_maps = 
    smtp_discard_ehlo_keywords = 
    smtp_dns_resolver_options = 
    smtp_enforce_tls = no
    smtp_fallback_relay = $fallback_relay
    smtp_generic_maps = 
    smtp_header_checks = 
    smtp_helo_name = $myhostname
    smtp_helo_timeout = 300s
    smtp_host_lookup = dns
    smtp_initial_destination_concurrency = $initial_destination_concurrency
    smtp_line_length_limit = 990
    smtp_mail_timeout = 300s
    smtp_mime_header_checks = 
    smtp_mx_address_limit = 5
    smtp_mx_session_limit = 2
    smtp_nested_header_checks = 
    smtp_never_send_ehlo = no
    smtp_pix_workaround_delay_time = 10s
    smtp_pix_workaround_maps = 
    smtp_pix_workaround_threshold_time = 500s
    smtp_pix_workarounds = disable_esmtp,delay_dotcrlf
    smtp_quit_timeout = 300s
    smtp_quote_rfc821_envelope = yes
    smtp_randomize_addresses = yes
    smtp_rcpt_timeout = 300s
    smtp_reply_filter = 
    smtp_rset_timeout = 20s
    smtp_sasl_auth_cache_name = 
    smtp_sasl_auth_cache_time = 90d
    smtp_sasl_auth_enable = no
    smtp_sasl_auth_soft_bounce = yes
    smtp_sasl_mechanism_filter = 
    smtp_sasl_password_maps = 
    smtp_sasl_path = 
    smtp_sasl_security_options = noplaintext, noanonymous
    smtp_sasl_tls_security_options = $smtp_sasl_security_options
    smtp_sasl_tls_verified_security_options = $smtp_sasl_tls_security_options
    smtp_sasl_type = cyrus
    smtp_send_xforward_command = no
    smtp_sender_dependent_authentication = no
    smtp_skip_5xx_greeting = yes
    smtp_skip_quit_response = yes
    smtp_starttls_timeout = 300s
    smtp_tls_CAfile = 
    smtp_tls_CApath = 
    smtp_tls_block_early_mail_reply = no
    smtp_tls_cert_file = 
    smtp_tls_ciphers = export
    smtp_tls_dcert_file = 
    smtp_tls_dkey_file = $smtp_tls_dcert_file
    smtp_tls_eccert_file = 
    smtp_tls_eckey_file = $smtp_tls_eccert_file
    smtp_tls_enforce_peername = yes
    smtp_tls_exclude_ciphers = 
    smtp_tls_fingerprint_cert_match = 
    smtp_tls_fingerprint_digest = md5
    smtp_tls_key_file = $smtp_tls_cert_file
    smtp_tls_loglevel = 0
    smtp_tls_mandatory_ciphers = medium
    smtp_tls_mandatory_exclude_ciphers = 
    smtp_tls_mandatory_protocols = SSLv3, TLSv1
    smtp_tls_note_starttls_offer = no
    smtp_tls_per_site = 
    smtp_tls_policy_maps = 
    smtp_tls_protocols = !SSLv2
    smtp_tls_scert_verifydepth = 9
    smtp_tls_secure_cert_match = nexthop, dot-nexthop
    smtp_tls_security_level = 
    smtp_tls_session_cache_database = btree:${queue_directory}/smtp_scache
    smtp_tls_session_cache_timeout = 3600s
    smtp_tls_verify_cert_match = hostname
    smtp_use_tls = no
    smtp_xforward_timeout = 300s
    smtpd_authorized_verp_clients = $authorized_verp_clients
    smtpd_authorized_xclient_hosts = 
    smtpd_authorized_xforward_hosts = 
    smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu)
    smtpd_client_connection_count_limit = 50
    smtpd_client_connection_rate_limit = 0
    smtpd_client_event_limit_exceptions = ${smtpd_client_connection_limit_exceptions:$mynetworks}
    smtpd_client_message_rate_limit = 0
    smtpd_client_new_tls_session_rate_limit = 0
    smtpd_client_port_logging = no
    smtpd_client_recipient_rate_limit = 0
    smtpd_client_restrictions = 
    smtpd_command_filter = 
    smtpd_data_restrictions = 
    smtpd_delay_open_until_valid_rcpt = yes
    smtpd_delay_reject = yes
    smtpd_discard_ehlo_keyword_address_maps = 
    smtpd_discard_ehlo_keywords = 
    smtpd_end_of_data_restrictions = 
    smtpd_enforce_tls = no
    smtpd_error_sleep_time = 1s
    smtpd_etrn_restrictions = 
    smtpd_expansion_filter = \t\40!"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\\]^_`abcdefghijklmnopqrstuvwxyz{|}~
    smtpd_forbidden_commands = CONNECT GET POST
    smtpd_hard_error_limit = ${stress?1}${stress:20}
    smtpd_helo_required = no
    smtpd_helo_restrictions = 
    smtpd_history_flush_threshold = 100
    smtpd_junk_command_limit = ${stress?1}${stress:100}
    smtpd_milters = 
    smtpd_noop_commands = 
    smtpd_null_access_lookup_key = <>
    smtpd_peername_lookup = yes
    smtpd_policy_service_max_idle = 300s
    smtpd_policy_service_max_ttl = 1000s
    smtpd_policy_service_timeout = 100s
    smtpd_proxy_ehlo = $myhostname
    smtpd_proxy_filter = 
    smtpd_proxy_options = 
    smtpd_proxy_timeout = 100s
    smtpd_recipient_limit = 1000
    smtpd_recipient_overshoot_limit = 1000
    smtpd_recipient_restrictions = permit_mynetworks reject_unauth_destination permit_inet_interfaces permit_sasl_authenticated
    smtpd_reject_footer = 
    smtpd_reject_unlisted_recipient = yes
    smtpd_reject_unlisted_sender = no
    smtpd_restriction_classes = 
    smtpd_sasl_auth_enable = no
    smtpd_sasl_authenticated_header = no
    smtpd_sasl_exceptions_networks = 
    smtpd_sasl_local_domain = 
    smtpd_sasl_path = smtpd
    smtpd_sasl_security_options = 
    smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
    smtpd_sasl_type = cyrus
    smtpd_sender_login_maps = 
    smtpd_sender_restrictions = 
    smtpd_service_name = smtpd
    smtpd_soft_error_limit = 10
    smtpd_starttls_timeout = ${stress?10}${stress:300}s
    smtpd_timeout = ${stress?10}${stress:300}s
    smtpd_tls_CAfile = 
    smtpd_tls_CApath = 
    smtpd_tls_always_issue_session_ids = yes
    smtpd_tls_ask_ccert = no
    smtpd_tls_auth_only = no
    smtpd_tls_ccert_verifydepth = 9
    smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem
    smtpd_tls_ciphers = export
    smtpd_tls_dcert_file = 
    smtpd_tls_dh1024_param_file = 
    smtpd_tls_dh512_param_file = 
    smtpd_tls_dkey_file = $smtpd_tls_dcert_file
    smtpd_tls_eccert_file = 
    smtpd_tls_eckey_file = $smtpd_tls_eccert_file
    smtpd_tls_eecdh_grade = strong
    smtpd_tls_exclude_ciphers = 
    smtpd_tls_fingerprint_digest = md5
    smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key
    smtpd_tls_loglevel = 0
    smtpd_tls_mandatory_ciphers = medium
    smtpd_tls_mandatory_exclude_ciphers = 
    smtpd_tls_mandatory_protocols = SSLv3, TLSv1
    smtpd_tls_protocols = 
    smtpd_tls_received_header = no
    smtpd_tls_req_ccert = no
    smtpd_tls_security_level = may
    smtpd_tls_session_cache_database = btree:${queue_directory}/smtpd_scache
    smtpd_tls_session_cache_timeout = 3600s
    smtpd_tls_wrappermode = no
    smtpd_use_tls = yes
    soft_bounce = no
    stale_lock_time = 500s
    stress = 
    strict_7bit_headers = no
    strict_8bitmime = no
    strict_8bitmime_body = no
    strict_mailbox_ownership = yes
    strict_mime_encoding_domain = no
    strict_rfc821_envelopes = no
    sun_mailtool_compatibility = no
    swap_bangpath = yes
    syslog_facility = mail
    syslog_name = ${multi_instance_name:postfix}${multi_instance_name?$multi_instance_name}
    tcp_windowsize = 0
    tls_append_default_CA = no
    tls_daemon_random_bytes = 32
    tls_disable_workarounds = CVE-2005-2969 CVE-2010-4180
    tls_eecdh_strong_curve = prime256v1
    tls_eecdh_ultra_curve = secp384r1
    tls_export_cipherlist = ALL:+RC4:@STRENGTH
    tls_high_cipherlist = ALL:!EXPORT:!LOW:!MEDIUM:+RC4:@STRENGTH
    tls_low_cipherlist = ALL:!EXPORT:+RC4:@STRENGTH
    tls_medium_cipherlist = ALL:!EXPORT:!LOW:+RC4:@STRENGTH
    tls_null_cipherlist = eNULL:!aNULL
    tls_preempt_cipherlist = no
    tls_random_bytes = 32
    tls_random_exchange_name = ${data_directory}/prng_exch
    tls_random_prng_update_period = 3600s
    tls_random_reseed_period = 3600s
    tls_random_source = dev:/dev/urandom
    tlsproxy_enforce_tls = $smtpd_enforce_tls
    tlsproxy_service_name = tlsproxy
    tlsproxy_tls_CAfile = $smtpd_tls_CAfile
    tlsproxy_tls_CApath = $smtpd_tls_CApath
    tlsproxy_tls_always_issue_session_ids = $smtpd_tls_always_issue_session_ids
    tlsproxy_tls_ask_ccert = $smtpd_tls_ask_ccert
    tlsproxy_tls_ccert_verifydepth = $smtpd_tls_ccert_verifydepth
    tlsproxy_tls_cert_file = $smtpd_tls_cert_file
    tlsproxy_tls_ciphers = $smtpd_tls_ciphers
    tlsproxy_tls_dcert_file = $smtpd_tls_dcert_file
    tlsproxy_tls_dh1024_param_file = $smtpd_tls_dh1024_param_file
    tlsproxy_tls_dh512_param_file = $smtpd_tls_dh512_param_file
    tlsproxy_tls_dkey_file = $smtpd_tls_dkey_file
    tlsproxy_tls_eccert_file = $smtpd_tls_eccert_file
    tlsproxy_tls_eckey_file = $smtpd_tls_eckey_file
    tlsproxy_tls_eecdh_grade = $smtpd_tls_eecdh_grade
    tlsproxy_tls_exclude_ciphers = $smtpd_tls_exclude_ciphers
    tlsproxy_tls_fingerprint_digest = $smtpd_tls_fingerprint_digest
    tlsproxy_tls_key_file = $smtpd_tls_key_file
    tlsproxy_tls_loglevel = $smtpd_tls_loglevel
    tlsproxy_tls_mandatory_ciphers = $smtpd_tls_mandatory_ciphers
    tlsproxy_tls_mandatory_exclude_ciphers = $smtpd_tls_mandatory_exclude_ciphers
    tlsproxy_tls_mandatory_protocols = $smtpd_tls_mandatory_protocols
    tlsproxy_tls_protocols = $smtpd_tls_protocols
    tlsproxy_tls_req_ccert = $smtpd_tls_req_ccert
    tlsproxy_tls_security_level = $smtpd_tls_security_level
    tlsproxy_tls_session_cache_timeout = $smtpd_tls_session_cache_timeout
    tlsproxy_use_tls = $smtpd_use_tls
    tlsproxy_watchdog_timeout = 10s
    trace_service_name = trace
    transport_maps = 
    transport_retry_time = 60s
    trigger_timeout = 10s
    undisclosed_recipients_header = 
    unknown_address_reject_code = 450
    unknown_address_tempfail_action = $reject_tempfail_action
    unknown_client_reject_code = 450
    unknown_helo_hostname_tempfail_action = $reject_tempfail_action
    unknown_hostname_reject_code = 450
    unknown_local_recipient_reject_code = 550
    unknown_relay_recipient_reject_code = 550
    unknown_virtual_alias_reject_code = 550
    unknown_virtual_mailbox_reject_code = 550
    unverified_recipient_defer_code = 450
    unverified_recipient_reject_code = 450
    unverified_recipient_reject_reason = 
    unverified_recipient_tempfail_action = $reject_tempfail_action
    unverified_sender_defer_code = 450
    unverified_sender_reject_code = 450
    unverified_sender_reject_reason = 
    unverified_sender_tempfail_action = $reject_tempfail_action
    verp_delimiter_filter = -=+
    virtual_alias_domains = $virtual_alias_maps
    virtual_alias_expansion_limit = 1000
    virtual_alias_maps = $virtual_maps
    virtual_alias_recursion_limit = 1000
    virtual_destination_concurrency_failed_cohort_limit = $default_destination_concurrency_failed_cohort_limit
    virtual_destination_concurrency_limit = $default_destination_concurrency_limit
    virtual_destination_concurrency_negative_feedback = $default_destination_concurrency_negative_feedback
    virtual_destination_concurrency_positive_feedback = $default_destination_concurrency_positive_feedback
    virtual_destination_rate_delay = $default_destination_rate_delay
    virtual_destination_recipient_limit = $default_destination_recipient_limit
    virtual_gid_maps = 
    virtual_initial_destination_concurrency = $initial_destination_concurrency
    virtual_mailbox_base = 
    virtual_mailbox_domains = $virtual_mailbox_maps
    virtual_mailbox_limit = 51200000
    virtual_mailbox_lock = fcntl, dotlock
    virtual_mailbox_maps = 
    virtual_minimum_uid = 100
    virtual_transport = virtual
    virtual_uid_maps = 
    27.3.2012 08:56 pupu | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    Tohle vypada OK. Jsi si jist, ze pouzivas syslog daemona, ktery pouziva prave ten konfiguracni soubor, ktery jsi prepisoval?
    27.3.2012 08:59 pupu | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    A jeste jedna vec. Ta konfigurace by take nemusela byt syntakticky spravna (fakt si nejsem jisty, jak zrovna Tvuj syslog reaguje na zjevne ptakoviny jako prioritu 'qmgr'). Hlasi ten syslog daemon neco pri startu?
    28.3.2012 10:07 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    Tohle vypada OK. Jsi si jist, ze pouzivas syslog daemona, ktery pouziva prave ten konfiguracni soubor, ktery jsi prepisoval?
    vlastne nevim, jak to poznam?

    zkousel jsem to najit na netu, ale moje anglictina na to bohuzel nestaci
    27.3.2012 10:39 GeorgeWH | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    mal som na mysli syslog, nie postfix :)
    28.3.2012 10:10 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    mal som na mysli syslog, nie postfix :)
    jestli myslis syslog.conf, tak ten jsem postaoval predevcirem 14:23; nebo neco jineho?
    28.3.2012 14:07 GeorgeWH | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    nie, myslim s akymi parametrami bezi demon:
    ps ax | grep syslogd
    
    28.3.2012 16:12 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    nie, myslim s akymi parametrami bezi demon:
    ps ax | grep syslogd
    
    1046 ? Sl 0:41 rsyslogd -c4
    28.3.2012 16:43 GeorgeWH | skóre: 30
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    zeby to bolo tymto? restartujes demona syslogd
    sudo /etc/init.d/sysklogd
    
    ale bezi ti demon rsyslogd
    ps ax | grep syslogd
    1046 ? Sl 0:41 rsyslogd -c4
    
    29.3.2012 06:44 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    zeby to bolo tymto? restartujes demona syslogd
    sudo /etc/init.d/sysklogd
    
    ale bezi ti demon rsyslogd
    ps ax | grep syslogd
    1046 ? Sl 0:41 rsyslogd -c4
    
    no jo, mas pravdu, psal jsem to do spatneho configu, spravny je /etc/rsyslog.d/postfix.conf uz to funguje, diky za pomoc
    26.3.2012 17:00 maleprase | skóre: 28
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    nemelo by to byt spis /etc/init.d/rsyslog ?
    27.3.2012 06:56 mrtn
    Rozbalit Rozbalit vše Re: Jak nastavit Postfix, aby nelogoval do syslogu?
    nemelo by to byt spis /etc/init.d/rsyslog ?
    jsem ten server pro jistotu cely restartoval, takze ta konfigurace se nacetla urcite, i kdyby to byl ten jiny daemon

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   Powered by Hosting 90 Server hosting
    © 1999-2013 Argonit s. r. o. Všechna práva vyhrazena.