Dotaz: Nouzový grafický režim

[OndraK]

Vážení pánové Linuxové!

Nedávno jsem se dozvěděl o novém superlevném počítači. Chci si jej pořídit na domácí hraní. Značku nebudu zmiňovat, nechci dělat reklamu. Má na něm běžet Fedora. Cena do 3000Kč (a to nejdražší bude monitor, jestli neseženu nějaký jetý, nebo pojedu přes vzdálenou plochu, pak do 1000Kč). Processor ARM. Tím tak asi všechny informaci končí. Jelikož jsem neználek ve světě Linuxu, nainstaloval jsem Fedoru 16 na svůj notebook (Dell Latitude D505). A zde se dostávám k jádru věci.

Grafika jede stále v nouzovém režimu !. Zkoušel jsem už všechno možný. Včetně přeinstalace systému a zvětšení swap, boot prostoru; instalace nového ovladače pro grafiku. Není třeba doinstalovat grafické prostředí? Myslím, že mám Gnome 3.2.1. Netí třeba ještě něco. Někde to zapnout. Prosím pomoc, nechci se vzdávat. Děkuji za podporu a přeji krásný den. Ondra

---

---

Odpovědi

[nekdo]

Pošli výstup lspci | grep VGA

Ať víme, co máš přesně za grafiku.

[OndraK]

00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)

[nekdo]

Nevím, jaká je verze Xorg a ovladače "intel" ve Fedoře 16. Obecně by to chtělo vyzkoušet co nejnovější verzi ovladače "intel", resp. co nejnovější Xorg. Možná bude potřeba i novější jádro.

[OndraK]

jak zjistím verzi Xorg?

[nekdo]

Xorg -version

[OndraK]

X.Org X Server 1.11.4
Release Date: 2012-01-27
X Protocol Version 11, Revision 0
Build Operating System: x86-16 2.6.32-220.4.1.el6.x86_64
Current Operating System: Linux kapucian.deimos.prag 3.3.0-4.fc16.i686 #1 SMP Tue Mar 20 18:45:14 UTC 2012 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-4.fc16.i686 root=UUID=06d88fca-7ae9-4aaf-b9c3-f23b744fcca6 ro rd.md=0 rd.lvm=0 rd.dm=0 KEYTABLE=cz-us-qwertz quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8
Build Date: 08 March 2012  11:30:40PM
Build ID: xorg-x11-server 1.11.4-2.fc16
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

[OndraK]

koukám na http://wiki.x.org a nejsem z toho moudrý.

[OndraK]

Nástroj automatického hlášení chyb mic nehlásí. Před přeinstalací systému to hlásilo něco jako: "was killed by signal 6 (SIGABRT)". což jsem se dočetl, že je nedostatek paměti, proto jsem přeinstaloval a zvětšil prostor swap a boot.Teď je to snad v pořádku. total used free shared buffers cached Mem: 2058060 698820 1359240 0 28764 391616 -/+ buffers/cache: 278440 1779620 Swap: 1048572 0 1048572

nicméně chyba není a grafický mód taky ne.

:(

[OndraK]

Nástroj automatického hlášení chyb mic nehlásí. Před přeinstalací systému to hlásilo něco jako: "was killed by signal 6 (SIGABRT)". což jsem se dočetl, že je nedostatek paměti, proto jsem přeinstaloval a zvětšil prostor swap a boot.Teď je to snad v pořádku .

výpis paměti:free

.                         total          used                free     shared     buffers      cached

Mem:          2058060      698820        1359240             0      28764      391616

-/+ buffers/cache:            278440        1779620

Swap:          1048572               0         1048572

nicméně chyba není a grafický mód taky ne. :(

ještě jednou srovnaný výpis

[nekdo]

Pokud se máme posunout vpřed, tak je nutné říct, co znamená přesně "chyba není a grafický mód taky ne".

Bootování skončí v textové konzoli a výpiše to nějaké hlášení? Jaké přesně hlášení to výpíše?

[OndraK]

Když jsem měl jaskousi chybu (was killed by signal 6 (SIGABRT)), tak při spuštění "Nástroje automatického hlášení chyb" zde byl jakýsi popis chyby. Při googlování jsem našel, že je nedostatek paměti. Tedy jsem přeinstaloval Fedoru (mám ji na Flash jako Live). Zvětšil jsem paměť boot a swap. Po té se již nehlássí v tomto nástroji nic. V "Systémové Info" je zobrazeno Režim: Nouzový. Celé prostředí je takové základní, grafika jen strohá, animace žádná... Vlastně nevím, jak má vypadat, usuzuji, že bude lepší až bude režim standardní. Zatím děkuji za podporu. Ondra

[nekdo]

Díky za info. Jak psal kolega, pošli výstup příkazu df -h Jinak Fedoru vůbec neznám.

[GAZDOWN]

Dobrý den, nepoužívám fedoru a tak si nejsem zcela jist kde je uložen /var a /tmp, zkuste poslat df -h, tato chyba se může objevit při nedostatku místa na /tmp. Nevím jestli se Vám vůbec rozjede Gnome, nebo X spadnou ihned po tom, co se pokusí spustit Gnome.

[OndraK]

Souborový systém Velikost Užito Volno Uži% Připojeno do
rootfs                    5,9G    2,8G      3,1G  47% /
devtmpfs             997M          0     997M   0% /dev
tmpfs                 1005M   228K   1005M   1% /dev/shm
/dev/sda6              5,9G    2,8G      3,1G  47% /
tmpfs                 1005M     42M     964M   5% /run
tmpfs                 1005M          0   1005M   0% /sys/fs/cgroup
tmpfs                 1005M          0   1005M   0% /media
/dev/sda5            505M    137M    343M  29% /home
/dev/sda2            1,5G     103M      1,3G   8% /boot

 

Nepřijde mi, že je někde nedostatek...

[nekdo]

Zakopaný pes bude asi v tom, že v live systému zřejmě není obsaženo Gnome/KDE... Nainstalujte systém (Linux) na pevný disk.

[OndraK]

asi jsem to špatně popsal, měl jsem jej na flash a po nabutování zde byla nabídka na instalaci na HDD, což jsem provedl. Po té jsem upgradoval SW. Nicméně instalační CD nemám. nicméně kde se přesvědčím? V systemovém Info je v přehledu Gnome 3.2.1.

[rADOn]

Posti /var/log/Xorg.0.log a výstup glxinfo. Intelí GMA grafiku jsem měl v několika notesech bez problémů.

[OndraK]

# glxinfo
name of display: :0.0
display: :0  screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.4
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_INTEL_swap_event
client glx vendor string: Mesa Project and SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_framebuffer_sRGB,
GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent,
GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap,
GLX_INTEL_swap_event
GLX version: 1.4
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_MESA_multithread_makecurrent, GLX_MESA_swap_control,
GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read,
GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group,
GLX_EXT_texture_from_pixmap
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Intel(R) 852GM/855GM
OpenGL version string: 1.3 Mesa 7.11.2
OpenGL extensions:
GL_ARB_multisample, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_copy_texture, GL_EXT_polygon_offset, GL_EXT_subtexture,
GL_EXT_texture_object, GL_EXT_vertex_array, GL_EXT_compiled_vertex_array,
GL_EXT_texture, GL_EXT_texture3D, GL_IBM_rasterpos_clip,
GL_ARB_point_parameters, GL_EXT_draw_range_elements, GL_EXT_packed_pixels,
GL_EXT_point_parameters, GL_EXT_rescale_normal,
GL_EXT_separate_specular_color, GL_EXT_texture_edge_clamp,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_ARB_multitexture,
GL_IBM_multimode_draw_arrays, GL_IBM_texture_mirrored_repeat,
GL_3DFX_texture_compression_FXT1, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_transpose_matrix,
GL_EXT_blend_func_separate, GL_EXT_fog_coord, GL_EXT_multi_draw_arrays,
GL_EXT_secondary_color, GL_EXT_texture_env_add,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_INGR_blend_func_separate, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_texgen_reflection, GL_SUN_multi_draw_arrays,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_EXT_framebuffer_object, GL_EXT_texture_env_dot3, GL_MESA_window_pos,
GL_NV_packed_depth_stencil, GL_NV_texture_rectangle, GL_NV_vertex_program,
GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_window_pos, GL_EXT_texture_cube_map, GL_NV_vertex_program1_1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_APPLE_vertex_array_object, GL_ARB_draw_buffers, GL_ARB_shader_objects,
GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ATI_draw_buffers,
GL_EXT_stencil_wrap, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_ARB_half_float_pixel, GL_ARB_point_sprite, GL_ARB_shading_language_100,
GL_ARB_sync, GL_ARB_vertex_buffer_object, GL_ATI_blend_equation_separate,
GL_EXT_blend_equation_separate, GL_OES_read_format,
GL_ARB_pixel_buffer_object, GL_ARB_texture_rectangle,
GL_EXT_pixel_buffer_object, GL_EXT_texture_rectangle,
GL_ARB_framebuffer_object, GL_EXT_framebuffer_blit,
GL_EXT_framebuffer_multisample, GL_EXT_packed_depth_stencil,
GL_APPLE_object_purgeable, GL_ARB_vertex_array_object,
GL_EXT_gpu_program_parameters, GL_EXT_texture_env_combine,
GL_OES_EGL_image, GL_ARB_copy_buffer, GL_ARB_map_buffer_range,
GL_EXT_separate_shader_objects, GL_ARB_ES2_compatibility,
GL_ARB_draw_elements_base_vertex, GL_ARB_explicit_attrib_location,
GL_ARB_provoking_vertex, GL_ARB_sampler_objects, GL_EXT_provoking_vertex,
GL_ARB_robustness

32 GLX Visuals
visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x021 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x022 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x081 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x082 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x083 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x084 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x085 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x086 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x087 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x088 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x089 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x08a 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x08c 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x08d 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x08e 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x08f 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x090 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x091 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x092 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x093 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x094 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x095 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x096 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x097 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x098 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x099 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x09a 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x09b 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x09c 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x09d 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x050 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None

48 GLXFBConfigs:
visual  x   bf lv rg d st  colorbuffer  sr ax dp st accumbuffer  ms  cav
id dep cl sp  sz l  ci b ro  r  g  b  a F gb bf th cl  r  g  b  a ns b eat
----------------------------------------------------------------------------
0x051  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x052  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x053  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x054  0 tc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x055  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x056  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x057 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x058 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x059 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x05a 24 tc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x05b 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x05c 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x05d 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x05e 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x05f 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x060 24 tc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x061 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x062 32 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x063  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x064  0 tc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x065 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x066 24 tc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x067 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x068 24 tc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow
0x069  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x06a  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x06b  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0  0  0  0  0  0  0  0 0 None
0x06c  0 dc  0  16  0 r  . .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x06d  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x06e  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x06f 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x070 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x071 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0  0  0  0  0  0  0  0 0 None
0x072 24 dc  0  24  0 r  . .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x073 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x074 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x075 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x076 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x077 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0  0  0  0  0  0  0  0 0 None
0x078 24 dc  0  32  0 r  . .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x079 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x07a 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x07b  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0  0  0  0  0  0 0 None
0x07c  0 dc  0  16  0 r  y .   5  6  5  0 .  .  0 16  0 16 16 16  0  0 0 Slow
0x07d 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8  0  0  0  0  0 0 None
0x07e 24 dc  0  24  0 r  y .   8  8  8  0 .  .  0 24  8 16 16 16  0  0 0 Slow
0x07f 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8  0  0  0  0  0 0 None
0x080 24 dc  0  32  0 r  y .   8  8  8  8 .  .  0 24  8 16 16 16 16  0 0 Slow

 

 

co s tím?

je vše OK?

[OndraK]

vypis /var/log/Xorg.0.log

 

 

[    52.302]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[    52.302] X Protocol Version 11, Revision 0
[    52.302] Build Operating System: x86-16 2.6.32-220.4.1.el6.x86_64
[    52.302] Current Operating System: Linux kapucian.deimos.prag 3.3.0-4.fc16.i686 #1 SMP Tue Mar 20 18:45:14 UTC 2012 i686
[    52.302] Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.0-4.fc16.i686 root=UUID=06d88fca-7ae9-4aaf-b9c3-f23b744fcca6 ro rd.md=0 rd.lvm=0 rd.dm=0 KEYTABLE=cz-us-qwertz quiet SYSFONT=latarcyrheb-sun16 rhgb rd.luks=0 LANG=en_US.UTF-8
[    52.302] Build Date: 08 March 2012  11:30:40PM
[    52.302] Build ID: xorg-x11-server 1.11.4-2.fc16
[    52.302] Current version of pixman: 0.22.2
[    52.302]     Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[    52.302] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    52.302] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 28 15:06:52 2012
[    52.321] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    52.321] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    52.321] (==) No Layout section.  Using the first Screen section.
[    52.321] (==) No screen section available. Using defaults.
[    52.321] (**) |-->Screen "Default Screen Section" (0)
[    52.321] (**) |   |-->Monitor "<default monitor>"
[    52.321] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[    52.321] (==) Automatically adding devices
[    52.321] (==) Automatically enabling devices
[    52.322] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[    52.322] (==) ModulePath set to "/usr/lib/xorg/modules"
[    52.322] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[    52.322] (II) Loader magic: 0x8222580
[    52.322] (II) Module ABI versions:
[    52.322]     X.Org ANSI C Emulation: 0.4
[    52.322]     X.Org Video Driver: 11.0
[    52.322]     X.Org XInput driver : 13.0
[    52.322]     X.Org Server Extension : 6.0
[    52.325] (--) PCI:*(0:0:2:0) 8086:3582:1028:0163 rev 2, Mem @ 0xf0000000/134217728, 0xfaf80000/524288, I/O @ 0x0000c000/8, BIOS @ 0x????????/131072
[    52.325] (--) PCI: (0:0:2:1) 8086:3582:1028:0163 rev 2, Mem @ 0xe8000000/134217728, 0xfaf00000/524288, BIOS @ 0x????????/65536
[    52.325] (II) LoadModule: "extmod"
[    52.341] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[    52.343] (II) Module extmod: vendor="X.Org Foundation"
[    52.343]     compiled for 1.11.4, module version = 1.0.0
[    52.343]     Module class: X.Org Server Extension
[    52.343]     ABI class: X.Org Server Extension, version 6.0
[    52.343] (II) Loading extension SELinux
[    52.343] (II) Loading extension MIT-SCREEN-SAVER
[    52.343] (II) Loading extension XFree86-VidModeExtension
[    52.343] (II) Loading extension XFree86-DGA
[    52.343] (II) Loading extension DPMS
[    52.344] (II) Loading extension XVideo
[    52.344] (II) Loading extension XVideo-MotionCompensation
[    52.344] (II) Loading extension X-Resource
[    52.344] (II) LoadModule: "dbe"
[    52.345] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[    52.346] (II) Module dbe: vendor="X.Org Foundation"
[    52.346]     compiled for 1.11.4, module version = 1.0.0
[    52.346]     Module class: X.Org Server Extension
[    52.346]     ABI class: X.Org Server Extension, version 6.0
[    52.346] (II) Loading extension DOUBLE-BUFFER
[    52.346] (II) LoadModule: "glx"
[    52.348] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    52.348] (II) Module glx: vendor="X.Org Foundation"
[    52.348]     compiled for 1.11.4, module version = 1.0.0
[    52.348]     ABI class: X.Org Server Extension, version 6.0
[    52.348] (==) AIGLX enabled
[    52.349] (II) Loading extension GLX
[    52.349] (II) LoadModule: "record"
[    52.350] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[    52.351] (II) Module record: vendor="X.Org Foundation"
[    52.351]     compiled for 1.11.4, module version = 1.13.0
[    52.351]     Module class: X.Org Server Extension
[    52.351]     ABI class: X.Org Server Extension, version 6.0
[    52.351] (II) Loading extension RECORD
[    52.351] (II) LoadModule: "dri"
[    52.352] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[    52.353] (II) Module dri: vendor="X.Org Foundation"
[    52.353]     compiled for 1.11.4, module version = 1.0.0
[    52.353]     ABI class: X.Org Server Extension, version 6.0
[    52.353] (II) Loading extension XFree86-DRI
[    52.353] (II) LoadModule: "dri2"
[    52.353] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    52.353] (II) Module dri2: vendor="X.Org Foundation"
[    52.353]     compiled for 1.11.4, module version = 1.2.0
[    52.353]     ABI class: X.Org Server Extension, version 6.0
[    52.353] (II) Loading extension DRI2
[    52.353] (==) Matched intel as autoconfigured driver 0
[    52.353] (==) Matched vesa as autoconfigured driver 1
[    52.353] (==) Matched fbdev as autoconfigured driver 2
[    52.353] (==) Assigned the driver to the xf86ConfigLayout
[    52.353] (II) LoadModule: "intel"
[    52.354] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    52.354] (II) Module intel: vendor="X.Org Foundation"
[    52.354]     compiled for 1.11.3, module version = 2.17.0
[    52.354]     Module class: X.Org Video Driver
[    52.354]     ABI class: X.Org Video Driver, version 11.0
[    52.354] (II) LoadModule: "vesa"
[    52.354] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    52.354] (II) Module vesa: vendor="X.Org Foundation"
[    52.354]     compiled for 1.10.99.902, module version = 2.3.0
[    52.354]     Module class: X.Org Video Driver
[    52.354]     ABI class: X.Org Video Driver, version 11.0
[    52.354] (II) LoadModule: "fbdev"
[    52.355] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[    52.355] (II) Module fbdev: vendor="X.Org Foundation"
[    52.355]     compiled for 1.10.99.902, module version = 0.4.2
[    52.355]     ABI class: X.Org Video Driver, version 11.0
[    52.355] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[    52.356] (II) VESA: driver for VESA chipsets: vesa
[    52.356] (II) FBDEV: driver for framebuffer: fbdev
[    52.356] (++) using VT number 1

[    52.363] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    52.363] (WW) Falling back to old probe method for vesa
[    52.363] (WW) Falling back to old probe method for fbdev
[    52.364] (II) Loading sub module "fbdevhw"
[    52.364] (II) LoadModule: "fbdevhw"
[    52.364] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[    52.365] (II) Module fbdevhw: vendor="X.Org Foundation"
[    52.365]     compiled for 1.11.4, module version = 0.0.2
[    52.365]     ABI class: X.Org Video Driver, version 11.0
[    52.365] drmOpenDevice: node name is /dev/dri/card0
[    52.365] drmOpenDevice: open result is 8, (OK)
[    52.365] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    52.365] drmOpenDevice: node name is /dev/dri/card0
[    52.365] drmOpenDevice: open result is 8, (OK)
[    52.365] drmOpenByBusid: drmOpenMinor returns 8
[    52.365] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    52.365] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[    52.365] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    52.365] (==) intel(0): RGB weight 888
[    52.365] (==) intel(0): Default visual is TrueColor
[    52.365] (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[    52.365] (--) intel(0): Chipset: "852GM/855GM"
[    52.366] (**) intel(0): Relaxed fencing disabled
[    52.366] (**) intel(0): Wait on SwapBuffers? enabled
[    52.366] (**) intel(0): Triple buffering? enabled
[    52.366] (**) intel(0): Framebuffer tiled
[    52.366] (**) intel(0): Pixmaps tiled
[    52.366] (**) intel(0): 3D buffers tiled
[    52.366] (**) intel(0): SwapBuffers wait enabled
[    52.366] (==) intel(0): video overlay key set to 0x101fe
[    52.366] (II) intel(0): Output LVDS1 has no monitor section
[    52.366] (II) intel(0): found backlight control interface /sys/class/backlight/intel_backlight
[    52.740] (II) intel(0): Output VGA1 has no monitor section
[    52.752] (II) intel(0): Output DVI1 has no monitor section
[    52.752] (II) intel(0): EDID for output LVDS1
[    52.752] (II) intel(0): Manufacturer: LPL  Model: 0  Serial#: 0
[    52.752] (II) intel(0): Year: 2004  Week: 0
[    52.752] (II) intel(0): EDID Version: 1.3
[    52.752] (II) intel(0): Digital Display Input
[    52.753] (II) intel(0): Max Image Size [cm]: horiz.: 30  vert.: 23
[    52.753] (II) intel(0): Gamma: 2.20
[    52.753] (II) intel(0): No DPMS capabilities specified
[    52.753] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[    52.753] (II) intel(0): First detailed timing is preferred mode
[    52.753] (II) intel(0): redX: 0.590 redY: 0.343   greenX: 0.319 greenY: 0.539
[    52.753] (II) intel(0): blueX: 0.154 blueY: 0.133   whiteX: 0.312 whiteY: 0.328
[    52.753] (II) intel(0): Manufacturer's mask: 0
[    52.753] (II) intel(0): Supported detailed timing:
[    52.753] (II) intel(0): clock: 108.0 MHz   Image Size:  305 x 2280 mm
[    52.753] (II) intel(0): h_active: 1400  h_sync: 1440  h_sync_end 1560 h_blank_end 1680 h_border: 0
[    52.753] (II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1062 v_blanking: 1071 v_border: 0
[    52.753] (II) intel(0): Supported detailed timing:
[    52.753] (II) intel(0): clock: 108.0 MHz   Image Size:  305 x 2280 mm
[    52.753] (II) intel(0): h_active: 1400  h_sync: 1440  h_sync_end 1560 h_blank_end 1680 h_border: 0
[    52.754] (II) intel(0): v_active: 1050  v_sync: 1053  v_sync_end 1062 v_blanking: 1071 v_border: 0
[    52.754] (II) intel(0):  C1147?150E07
[    52.754] (II) intel(0):  ÐÀ° xP
[    52.754] (II) intel(0): EDID (in hex):
[    52.754] (II) intel(0):     00ffffffffffff00320c000000000000
[    52.754] (II) intel(0):     000e0103801e17780a3c809757518a27
[    52.754] (II) intel(0):     22505400000001010101010101010101
[    52.754] (II) intel(0):     010101010101302a7818511a15402878
[    52.754] (II) intel(0):     390031e410000018302a7818511a1540
[    52.754] (II) intel(0):     2878390031e410000000000000fe0043
[    52.754] (II) intel(0):     31313437033135304530370a000000fe
[    52.754] (II) intel(0):     00d0c0b0a09078500002000a202000b6
[    52.754] (II) intel(0): EDID vendor "LPL", prod id 0
[    52.754] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    52.754] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    52.754] (II) intel(0): Printing DDC gathered Modelines:
[    52.754] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    52.755] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    52.755] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    52.755] (II) intel(0): Printing probed modes for output LVDS1
[    52.755] (II) intel(0): Modeline "1400x1050"x60.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    52.756] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
[    52.756] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[    52.756] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz)
[    52.756] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
[    52.756] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
[    52.756] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
[    52.756] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
[    53.139] (II) intel(0): EDID for output VGA1
[    53.151] (II) intel(0): EDID for output DVI1
[    53.151] (II) intel(0): Output LVDS1 connected
[    53.151] (II) intel(0): Output VGA1 disconnected
[    53.151] (II) intel(0): Output DVI1 disconnected
[    53.151] (II) intel(0): Using exact sizes for initial modes
[    53.151] (II) intel(0): Output LVDS1 using initial mode 1400x1050 +0+0
[    53.151] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    53.151] (II) intel(0): Kernel page flipping support detected, enabling
[    53.152] (**) intel(0): Display dimensions: (300, 230) mm
[    53.152] (**) intel(0): DPI set to (118, 115)
[    53.152] (II) Loading sub module "fb"
[    53.152] (II) LoadModule: "fb"
[    53.153] (II) Loading /usr/lib/xorg/modules/libfb.so
[    53.154] (II) Module fb: vendor="X.Org Foundation"
[    53.154]     compiled for 1.11.4, module version = 1.0.0
[    53.154]     ABI class: X.Org ANSI C Emulation, version 0.4
[    53.154] (II) Loading sub module "dri2"
[    53.154] (II) LoadModule: "dri2"
[    53.155] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[    53.155] (II) Module dri2: vendor="X.Org Foundation"
[    53.155]     compiled for 1.11.4, module version = 1.2.0
[    53.155]     ABI class: X.Org Server Extension, version 6.0
[    53.155] (II) UnloadModule: "vesa"
[    53.155] (II) Unloading vesa
[    53.155] (II) UnloadModule: "fbdev"
[    53.155] (II) Unloading fbdev
[    53.155] (II) UnloadModule: "fbdevhw"
[    53.155] (II) Unloading fbdevhw
[    53.155] (==) Depth 24 pixmap format is 32 bpp
[    53.155] (II) intel(0): [DRI2] Setup complete
[    53.155] (II) intel(0): [DRI2]   DRI driver: i915
[    53.155] (II) intel(0): Allocated new frame buffer 1408x1050 stride 8192, tiled
[    53.155] (II) UXA(0): Driver registered support for the following operations:
[    53.155] (II)         solid
[    53.155] (II)         copy
[    53.155] (II)         composite (RENDER acceleration)
[    53.155] (II)         put_image
[    53.155] (II)         get_image
[    53.155] (==) intel(0): Backing store disabled
[    53.155] (==) intel(0): Silken mouse enabled
[    53.155] (II) intel(0): Initializing HW Cursor
[    53.187] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    53.190] (==) intel(0): DPMS enabled
[    53.190] (==) intel(0): Intel XvMC decoder disabled
[    53.190] (II) intel(0): Set up overlay video
[    53.190] (II) intel(0): direct rendering: DRI2 Enabled
[    53.190] (==) intel(0): hotplug detection: "enabled"
[    53.192] (--) RandR disabled
[    53.192] (II) Initializing built-in extension Generic Event Extension
[    53.192] (II) Initializing built-in extension SHAPE
[    53.192] (II) Initializing built-in extension MIT-SHM
[    53.192] (II) Initializing built-in extension XInputExtension
[    53.192] (II) Initializing built-in extension XTEST
[    53.192] (II) Initializing built-in extension BIG-REQUESTS
[    53.192] (II) Initializing built-in extension SYNC
[    53.192] (II) Initializing built-in extension XKEYBOARD
[    53.192] (II) Initializing built-in extension XC-MISC
[    53.192] (II) Initializing built-in extension XINERAMA
[    53.192] (II) Initializing built-in extension XFIXES
[    53.192] (II) Initializing built-in extension RENDER
[    53.192] (II) Initializing built-in extension RANDR
[    53.192] (II) Initializing built-in extension COMPOSITE
[    53.192] (II) Initializing built-in extension DAMAGE
[    53.193] (II) SELinux: Disabled by boolean
[    53.214] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    53.214] (II) AIGLX: enabled GLX_INTEL_swap_event
[    53.214] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    53.214] (II) AIGLX: enabled GLX_SGI_make_current_read
[    53.214] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    53.214] (II) AIGLX: Loaded and initialized i915
[    53.214] (II) GLX: Initialized DRI2 GL provider for screen 0
[    53.215] (II) intel(0): Setting screen physical size to 370 x 277
[    53.294] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    53.294] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    53.294] (**) Video Bus: Applying InputClass "system-setup-keyboard"
[    53.294] (II) LoadModule: "evdev"
[    53.295] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.295] (II) Module evdev: vendor="X.Org Foundation"
[    53.295]     compiled for 1.11.3, module version = 2.6.99
[    53.295]     Module class: X.Org XInput Driver
[    53.295]     ABI class: X.Org XInput driver, version 13.0
[    53.295] (II) Using input driver 'evdev' for 'Video Bus'
[    53.295] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.295] (**) Video Bus: always reports core events
[    53.295] (**) evdev: Video Bus: Device: "/dev/input/event4"
[    53.295] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    53.295] (--) evdev: Video Bus: Found keys
[    53.295] (II) evdev: Video Bus: Configuring as keyboard
[    53.295] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input4/event4"
[    53.295] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6)
[    53.295] (**) Option "xkb_rules" "evdev"
[    53.295] (**) Option "xkb_model" "pc105"
[    53.296] (**) Option "xkb_layout" "cz,us"
[    53.296] (WW) Option "xkb_variant" requires an string value
[    53.296] (WW) Option "XkbVariant" requires an string value
[    53.296] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    53.336] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    53.336] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    53.336] (**) Power Button: Applying InputClass "system-setup-keyboard"
[    53.336] (II) Using input driver 'evdev' for 'Power Button'
[    53.336] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.336] (**) Power Button: always reports core events
[    53.336] (**) evdev: Power Button: Device: "/dev/input/event1"
[    53.336] (--) evdev: Power Button: Vendor 0 Product 0x1
[    53.336] (--) evdev: Power Button: Found keys
[    53.336] (II) evdev: Power Button: Configuring as keyboard
[    53.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[    53.336] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    53.336] (**) Option "xkb_rules" "evdev"
[    53.336] (**) Option "xkb_model" "pc105"
[    53.336] (**) Option "xkb_layout" "cz,us"
[    53.336] (WW) Option "xkb_variant" requires an string value
[    53.336] (WW) Option "XkbVariant" requires an string value
[    53.336] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    53.337] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    53.337] (II) No input driver specified, ignoring this device.
[    53.337] (II) This device may have been added with another device file.
[    53.337] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    53.337] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    53.337] (**) Sleep Button: Applying InputClass "system-setup-keyboard"
[    53.338] (II) Using input driver 'evdev' for 'Sleep Button'
[    53.338] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.338] (**) Sleep Button: always reports core events
[    53.338] (**) evdev: Sleep Button: Device: "/dev/input/event2"
[    53.338] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[    53.338] (--) evdev: Sleep Button: Found keys
[    53.338] (II) evdev: Sleep Button: Configuring as keyboard
[    53.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[    53.338] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    53.338] (**) Option "xkb_rules" "evdev"
[    53.338] (**) Option "xkb_model" "pc105"
[    53.338] (**) Option "xkb_layout" "cz,us"
[    53.338] (WW) Option "xkb_variant" requires an string value
[    53.338] (WW) Option "XkbVariant" requires an string value
[    53.338] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    53.339] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    53.339] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    53.339] (**) AT Translated Set 2 keyboard: Applying InputClass "system-setup-keyboard"
[    53.339] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    53.339] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.339] (**) AT Translated Set 2 keyboard: always reports core events
[    53.339] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event3"
[    53.339] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    53.339] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    53.339] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    53.339] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    53.339] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    53.339] (**) Option "xkb_rules" "evdev"
[    53.339] (**) Option "xkb_model" "pc105"
[    53.339] (**) Option "xkb_layout" "cz,us"
[    53.339] (WW) Option "xkb_variant" requires an string value
[    53.339] (WW) Option "XkbVariant" requires an string value
[    53.339] (**) Option "xkb_options" "terminate:ctrl_alt_bksp,grp:shifts_toggle,grp_led:scroll"
[    53.340] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/event5)
[    53.340] (**) PS/2 Mouse: Applying InputClass "evdev pointer catchall"
[    53.340] (II) Using input driver 'evdev' for 'PS/2 Mouse'
[    53.340] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    53.340] (**) PS/2 Mouse: always reports core events
[    53.340] (**) evdev: PS/2 Mouse: Device: "/dev/input/event5"
[    53.340] (--) evdev: PS/2 Mouse: Vendor 0x2 Product 0x8
[    53.340] (--) evdev: PS/2 Mouse: Found 3 mouse buttons
[    53.340] (--) evdev: PS/2 Mouse: Found relative axes
[    53.340] (--) evdev: PS/2 Mouse: Found x and y relative axes
[    53.340] (II) evdev: PS/2 Mouse: Configuring as mouse
[    53.340] (**) evdev: PS/2 Mouse: YAxisMapping: buttons 4 and 5
[    53.340] (**) evdev: PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    53.340] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[    53.340] (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE, id 10)
[    53.340] (II) evdev: PS/2 Mouse: initialized for relative axes.
[    53.341] (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
[    53.341] (**) PS/2 Mouse: (accel) acceleration profile 0
[    53.341] (**) PS/2 Mouse: (accel) acceleration factor: 2.000
[    53.341] (**) PS/2 Mouse: (accel) acceleration threshold: 4
[    53.341] (II) config/udev: Adding input device PS/2 Mouse (/dev/input/mouse0)
[    53.341] (II) No input driver specified, ignoring this device.
[    53.341] (II) This device may have been added with another device file.
[    53.341] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/event6)
[    53.341] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "evdev touchpad catchall"
[    53.341] (**) AlpsPS/2 ALPS GlidePoint: Applying InputClass "touchpad catchall"
[    53.341] (II) LoadModule: "synaptics"
[    53.342] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    53.342] (II) Module synaptics: vendor="X.Org Foundation"
[    53.342]     compiled for 1.11.1, module version = 1.5.0
[    53.342]     Module class: X.Org XInput Driver
[    53.342]     ABI class: X.Org XInput driver, version 13.0
[    53.342] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS GlidePoint'
[    53.342] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    53.342] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    53.342] (**) Option "Device" "/dev/input/event6"
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
[    53.342] (II) synaptics: AlpsPS/2 ALPS GlidePoint: device does not report finger width.
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: buttons: left right middle
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: Vendor 0x2 Product 0x8
[    53.342] (--) synaptics: AlpsPS/2 ALPS GlidePoint: invalid finger width range.  defaulting to 0 - 15
[    53.343] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    53.343] (**) AlpsPS/2 ALPS GlidePoint: always reports core events
[    53.343] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event6"
[    53.343] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD, id 11)
[    53.343] (**) synaptics: AlpsPS/2 ALPS GlidePoint: (accel) MinSpeed is now constant deceleration 2.5
[    53.343] (**) synaptics: AlpsPS/2 ALPS GlidePoint: MaxSpeed is now 1.75
[    53.343] (**) synaptics: AlpsPS/2 ALPS GlidePoint: AccelFactor is now 0.156
[    53.343] (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
[    53.343] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration profile 1
[    53.343] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration factor: 2.000
[    53.343] (**) AlpsPS/2 ALPS GlidePoint: (accel) acceleration threshold: 4
[    53.343] (--) synaptics: AlpsPS/2 ALPS GlidePoint: touchpad found
[    53.343] (II) config/udev: Adding input device AlpsPS/2 ALPS GlidePoint (/dev/input/mouse1)
[    53.343] (II) No input driver specified, ignoring this device.
[    53.343] (II) This device may have been added with another device file.
[    53.355] (II) intel(0): EDID vendor "LPL", prod id 0
[    53.355] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    53.355] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    53.355] (II) intel(0): Printing DDC gathered Modelines:
[    53.355] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    55.266] (II) intel(0): EDID vendor "LPL", prod id 0
[    55.266] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    55.266] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    55.266] (II) intel(0): Printing DDC gathered Modelines:
[    55.266] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    55.747] (II) intel(0): EDID vendor "LPL", prod id 0
[    55.748] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    55.748] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    55.748] (II) intel(0): Printing DDC gathered Modelines:
[    55.748] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    56.158] (II) intel(0): EDID vendor "LPL", prod id 0
[    56.159] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    56.159] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    56.159] (II) intel(0): Printing DDC gathered Modelines:
[    56.159] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    56.547] (II) intel(0): EDID vendor "LPL", prod id 0
[    56.547] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    56.547] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    56.547] (II) intel(0): Printing DDC gathered Modelines:
[    56.547] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    56.946] (II) intel(0): EDID vendor "LPL", prod id 0
[    56.946] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    56.946] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    56.946] (II) intel(0): Printing DDC gathered Modelines:
[    56.947] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    66.769] (II) intel(0): EDID vendor "LPL", prod id 0
[    66.769] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    66.769] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    66.769] (II) intel(0): Printing DDC gathered Modelines:
[    66.769] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    67.269] (II) intel(0): EDID vendor "LPL", prod id 0
[    67.269] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    67.269] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    67.269] (II) intel(0): Printing DDC gathered Modelines:
[    67.269] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    67.697] (II) intel(0): EDID vendor "LPL", prod id 0
[    67.697] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    67.697] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    67.697] (II) intel(0): Printing DDC gathered Modelines:
[    67.697] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    68.104] (II) intel(0): EDID vendor "LPL", prod id 0
[    68.104] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    68.104] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    68.104] (II) intel(0): Printing DDC gathered Modelines:
[    68.104] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    68.517] (II) intel(0): EDID vendor "LPL", prod id 0
[    68.517] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    68.517] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    68.517] (II) intel(0): Printing DDC gathered Modelines:
[    68.517] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    73.751] (II) intel(0): EDID vendor "LPL", prod id 0
[    73.751] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    73.751] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    73.751] (II) intel(0): Printing DDC gathered Modelines:
[    73.751] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)
[    80.351] (II) intel(0): EDID vendor "LPL", prod id 0
[    80.351] (II) intel(0):     EDID quirk: Detailed timings give vertical size in cm.
[    80.351] (II) intel(0): DDCModeFromDetailedTiming: 1400x1050 Warning: We only handle separate sync.
[    80.351] (II) intel(0): Printing DDC gathered Modelines:
[    80.351] (II) intel(0): Modeline "1400x1050"x0.0  108.00  1400 1440 1560 1680  1050 1053 1062 1071 -hsync -vsync (64.3 kHz)

 

 

co dál? mám to vzdát?

[nekdo]

Nevzdávat. Letmým pohledem jsem nic špatného nenašel.

[rastos]

[ 53.151] (II) intel(0): Output LVDS1 using initial mode 1400x1050 +0+0

Aj záver toho Xorg.0.log naznačuje, že bola zvolená rozlišovačka 1400x1050. A ty tvrdíš, že to tak nie je? Čo vypíše xdpyinfo ?

co dál? mám to vzdát?

To je ČO??? Nikdy!

[nekdo]

Ověřil bych, zda je Gnome nebo KDE... opravdu nainstalováno. Protože jsem pochopil, že "grafickým režimem" myslíš právě Gnome/KDE...

[MadCatX]

Klasická desktopová verze Fedory 16 obsahuje GNOME 3 a tudíž by se měl nainstalovat. Ty logy vypadají v pohodě, doopravdy by mě zajímalo, co tazazel míní tím "nouzovým" režimem. Funguje na i855 GNOME Shell, nebo to na té kartě spadne do fallbacku, což tazazel vyhodnotil jako "nouzový" režim?

[rADOn]

Jak praví kolegové, je to naprosto v pořádku. Nepřepnul jsi se náhodou do twm nebo tak něco? Jak to vypadá?

[OndraK]

Ahoj. Radit se nema, ale s prihlednutim k Vasim zkusenostem bych se tedy necemu s ARM procesorem vyhnul velkym obloukem. Muzete pekne (a zcela zbytecne) narazit a pokazit si nazor na Linux hned na zacatku. Navic neni ARM jako ARM. Pokud chcete zacit s Linuxem vazneji, rozhodne zkuste napr. tu Fedoru, ale na necem x86.

Apropos. Nic takoveho, jako "nouzovy rezim grafiky" v Linuxu neexistuje. Muzete napr. mit nejake orezane prostredi, muzete mit nizke rozliseni, vypnutou 3D/2D akceleraci a pod, ale analogie k nouzovy rezim jako ve Windows to neni. Jak to tak ctu, bude nejjednodussi, kdyz sem date fotku dipleje :)