abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×

včera 22:22 | Komunita

Dle plánu byl měl Debian 9 s kódovým názvem Stretch vyjít v sobotu 17. června. Po celém světě se začínají plánovat Release Parties. Oznámeno bylo vydání čtvrté RC (release candidate) verze instalátoru pro Debian 9 Stretch.

Ladislav Hagara | Komentářů: 5
26.5. 22:22 | Komunita

V Norimberku probíhá do neděle 28. května openSUSE Conference 2017. Na programu je celá řada zajímavých přednášek. Sledovat je lze online. K dispozici jsou také videozáznamy (YouTube) již proběhnuvších přednášek. Dění lze sledovat na Twitteru.

Ladislav Hagara | Komentářů: 0
26.5. 11:33 | IT novinky

Red Hat kupuje společnost Codenvy stojící za stejnojmenným webovým (cloudovým) integrovaným vývojovým prostředím (WIDE) postaveném na Eclipse Che.

Ladislav Hagara | Komentářů: 0
26.5. 08:55 | Nová verze

V listopadu 2014 byl představen fork Debianu bez systemd pojmenovaný Devuan. Po dva a půl roce jeho vývojáři oznámili vydání první stabilní verze 1.0. Jedná se o verzi s dlouhodobou podporou (LTS) a její kódové jméno je Jessie, podle planetky s katalogovým číslem 10 464.

Ladislav Hagara | Komentářů: 13
25.5. 20:22 | Zajímavý článek

Nadace Raspberry Pi vydala již osmapadesáté číslo (pdf) stostránkového anglicky psaného časopisu MagPi věnovanému Raspberry Pi a projektům postaveným na tomto jednodeskovém počítači a druhé číslo (pdf) časopisu Hello World primárně určeného pro učitele informatiky a výpočetní techniky.

Ladislav Hagara | Komentářů: 0
25.5. 19:55 | Humor

Portál Stack Overflow informuje na svém blogu, že pomohl ukončit editor Vim už více než milionu vývojářů. V loňském roce například hledal odpověď na otázku Jak ukončit editor Vim v průměru 1 z 20 000 návštěvníků.

Ladislav Hagara | Komentářů: 13
25.5. 19:22 | Nová verze

Po pěti měsících od vydání verze 3.5.0 byla vydána nová stabilní verze 3.6.0, tj. první z nové řady 3.6, minimalistické linuxové distribuce zaměřené na bezpečnost Alpine Linux (Wikipedie). Z novinek lze zmínit například podporu dvou nových 64bitových platforem little-endian POWER machines (ppc64le) a IBM z Systems (s390x) nebo nové balíčky Rust 1.17.0, Cargo 0.18.0, GHC 8.0.2 a Julia 0.5.2.

Ladislav Hagara | Komentářů: 0
24.5. 21:33 | Bezpečnostní upozornění

V Sambě byla nalezena a opravena bezpečnostní chyba CVE-2017-7494. Má-li útočník právo ukládat soubory na vzdálený server, může tam uložit připravenou sdílenou knihovnu a přinutit smbd server k jejímu načtení a tím pádem ke spuštění libovolných příkazů. Chyba je opravena v upstream verzích 4.6.4, 4.5.10 a 4.4.14. Chyba se týká všech verzí Samby od verze 3.5.0 vydané 1. března 2010.

Ladislav Hagara | Komentářů: 7
24.5. 20:44 | Nová verze

Byla vydána nová stabilní verze 4.3.0 integrovaného vývojového prostředí (IDE) Qt Creator. Z novinek lze zmínit například integraci editoru kódu do Qt Quick Designeru.

Ladislav Hagara | Komentářů: 1
24.5. 20:11 | Bezpečnostní upozornění

Společnost Check Point informuje na svém blogu o novém vektoru útoku. Pomocí titulků lze útočit na multimediální přehrávače VLC, Kodi, Popcorn Time, Stremio a pravděpodobně i další. Otevření útočníkem připraveného souboru s titulky v neaktualizovaném multimediálním přehrávači může vést ke spuštění libovolných příkazů pod právy uživatele. Ukázka na YouTube. Chyba je opravena v Kodi 17.2 nebo ve VLC 2.2.6.

Ladislav Hagara | Komentářů: 14
Chystáte se pořídit CPU AMD Ryzen?
 (6%)
 (32%)
 (1%)
 (8%)
 (44%)
 (9%)
Celkem 631 hlasů
 Komentářů: 62, poslední 19.5. 01:57
    Rozcestník

    Dotaz: debian sid: problem s nvidia 302.17

    29.6.2012 13:11 Martin Landa | skóre: 6
    debian sid: problem s nvidia 302.17
    Přečteno: 606×
    Zdravim,

    po vcerejsim upgradu (mam Debian GNU/Linux unstable) mam problem s nvidia driverem (302.17). Bohuzel mod, ktery mam v xorg.conf nastaveny - 1440x900 nefunguje. Obrazovka mi bezi v rozliseni 1920x1080, kdyz spustim nvidia-settings, tak vidim pouze toto rozliseni a nic vic.

    Prosel jsem nejake internetove diskuze, ale nenasel jsem nic co by mi pomohlo. Nemate nekdo podobny problem? Nepomuze nejaka specialni volba v xorg.conf anebo je jedina cesta downgrade nvidia na radu 2xx (v tomto pripade, jak to udelat elegantne bez zapleveleni systemu)?

    Diky predem za jakekoliv tipy! Martin

    Odpovědi

    30.6.2012 13:25 2X4B-523P | skóre: 38 | blog: Zelezo_vs_Debian
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    problém je v xorg, protože změnili ABI a nvidii (společnosti) se to moc nelíbí... v podstatě jediná speciální volba v xorg.conf je
    Section "ServerFlags"
        Option      "IgnoreABI"     "True"
    EndSection
    
    jinak může být prázdný (pokud není potřeba konfigurovat nějaký exotický monitor či HID)

    jinak stávající xorg.conf je tajný?
    30.6.2012 15:19 MadCatX
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    Pokud vím, tak s ABI tohle nemá co dělat. nVidia z ovladačů řady 302.xx odstranila GPU scaling a u LCD panelů tak zůstanete viset na jejich nativním rozlišení. Dá se to jakž takž řešit pomocí MetaModes, viz např zde http://nvnews.net/vbulletin/showthread.php?t=184968
    30.6.2012 15:33 2X4B-523P | skóre: 38 | blog: Zelezo_vs_Debian
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    mám sida na desktopu i notebooku, gtx470/gt540m a stěžuje si to jen na ABI, s LCD na těchto kartách (s posledním ovladačem) problémy nemám, asi mám kliku na panely
    30.6.2012 15:39 MadCatX
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    To je zajímavé. Určitě máte ovladač 302.17 a ne 295.xx? 302.17 s XOrg 1.12.2 se mi chová přesně tak, jak popisuje tazatel a žádné stížnosti na ABI v logu nevidím...
    1.7.2012 13:36 Martin Landa | skóre: 6
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    diky za tip, zatim se mi bohuzel nepodarilo do xorg.conf dostat "metamodes", ktera by zafungovala...
    2.7.2012 10:32 2X4B-523P | skóre: 38 | blog: Zelezo_vs_Debian
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    není to přímo vzorový xorg.conf, původně je generovaný nvidiáckým xconfigem a ještě jsem si hrál s multiseat...
    #NVidia-settings: X configuration file generated by nvidia-settings
    # nvid
    #Ryddtings:  version 256.25  (buildmeister@builder101)  Tue May 18 21:02:57 PDT 2010
    #YYYYZZ
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nv
    #idia-xconfig:  version 1.0  (buildmeister@builder58)  Fri Dec 18 18:35:05 PST 2009
    #YYZZ
    Section "ServerLayout"
        Identifier     "Seat_A"
        Screen      0  "Screen0"    0       0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
    #   Option         "Xinerama" "0"
    EndSection
    
    Section "Module"
            Load  "extmod"
            Load  "dbe"
            Load  "vbe"
            Load  "record"
            Load  "glx"
            Load  "xtrap"
            Load  "dri"
            Load "evdev"
            Load "evdev"
            Load "evdev"
            Load "evdev"
    EndSection
    
    Section "Files"
    EndSection
    
    Section "InputDevice"
    
        # generated from default
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/input/mice"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
    
        # generated from default
        Identifier     "Keyboard0"
        Driver         "evdev"
        Option         "Device" "/dev/input/event3"
    EndSection
    
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "Samsung SyncMaster"
        HorizSync       30.0 - 81.0
        VertRefresh     56.0 - 60.0
        Option         "DPMS"
    EndSection
    
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "GeForce GTX 470"
        BusID          "PCI:1:0:0"
        Screen          0
    #    Option        "TripleBuffer" "true"
    EndSection
    
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
    #    Option         "TwinView" "0"
        Option         "metamodes" "DFP-0: nvidia-auto-select +0+0"
        SubSection     "Display"
            Depth       24
        EndSubSection
    EndSection
    
    Section "ServerFlags"
        Option      "IgnoreABI"     "True"
    EndSection
    2.7.2012 11:52 Martin Landa | skóre: 6
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    vami prilozeny xorg.conf v mem pripade nic neresi, opravdu mate nvidia driver 302.17? Z internetovych diskuzi bych rekl, ze je problem v metamodes (jak naznacil kolega v teto diskuzi).
    2.7.2012 15:43 2X4B-523P | skóre: 38 | blog: Zelezo_vs_Debian
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    Příloha:
    ano, xorg.conf je vygenerován starší verzí... ale koukám do logu, dost nových hlášek co jsem nikdy neviděl, ale funguje to... jinak i v logu
    [    35.107] (**) Option "IgnoreABI" "True"
    [    35.107] (**) Ignoring ABI Version
    asi to není správný směr, ale zkusil jsem, co kdyby... ještě přidávám log a screen...
    cat /var/log/Xorg.0.log
    [    34.903] 
    X.Org X Server 1.12.1.902 (1.12.2 RC 2)
    Release Date: 2012-05-19
    [    34.903] X Protocol Version 11, Revision 0
    [    34.903] Build Operating System: Linux 3.2.0-2-amd64 x86_64 Debian
    [    34.903] Current Operating System: Linux debian 3.2.0-2-amd64 #1 SMP Mon Jun 11 17:24:18 UTC 2012 x86_64
    [    34.903] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-amd64 root=UUID=e0861cc7-6df4-4221-9553-1b896972c9fb ro
    [    34.903] Build Date: 20 May 2012  08:57:17AM
    [    34.903] xorg-server 2:1.12.1.902-1 (Cyril Brulebois kibiatdebian.org) 
    [    34.903] Current version of pixman: 0.26.0
    [    34.903]    Before reporting problems, check http://wiki.x.org
            to make sure that you have the latest version.
    [    34.903] Markers: (--) probed, (**) from config file, (==) default setting,
            (++) from command line, (!!) notice, (II) informational,
            (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [    34.903] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul  1 23:07:56 2012
    [    34.968] (==) Using config file: "/etc/X11/xorg.conf"
    [    34.968] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
    [    35.079] (==) ServerLayout "Seat_A"
    [    35.079] (**) |-->Screen "Screen0" (0)
    [    35.079] (**) |   |-->Monitor "Monitor0"
    [    35.107] (**) |   |-->Device "Device0"
    [    35.107] (**) |-->Input Device "Keyboard0"
    [    35.107] (**) |-->Input Device "Mouse0"
    [    35.107] (**) Option "IgnoreABI" "True"
    [    35.107] (**) Ignoring ABI Version
    [    35.107] (==) Automatically adding devices
    [    35.107] (==) Automatically enabling devices
    [    35.242] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    [    35.242]    Entry deleted from font path.
    [    35.242] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
    [    35.242]    Entry deleted from font path.
    [    35.242] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
    [    35.242]    Entry deleted from font path.
    [    35.285] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
    [    35.285]    Entry deleted from font path.
    [    35.285] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
    [    35.285]    Entry deleted from font path.
    [    35.285] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
    [    35.285]    Entry deleted from font path.
    [    35.285] (==) FontPath set to:
            /usr/share/fonts/X11/misc,
            /usr/share/fonts/X11/Type1,
            built-ins
    [    35.285] (==) ModulePath set to "/usr/lib/xorg/modules"
    [    35.285] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [    35.285] (WW) Disabling Mouse0
    [    35.285] (II) Loader magic: 0x7fa75bdc2ae0
    [    35.285] (II) Module ABI versions:
    [    35.285]    X.Org ANSI C Emulation: 0.4
    [    35.285]    X.Org Video Driver: 12.0
    [    35.285]    X.Org XInput driver : 16.0
    [    35.285]    X.Org Server Extension : 6.0
    [    35.285] (--) PCI:*(0:1:0:0) 10de:06cd:1043:8347 rev 163, Mem @ 0xf4000000/33554432, 0xe8000000/134217728, 0xf0000000/67108864, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [    35.285] (II) Open ACPI successful (/var/run/acpid.socket)
    [    35.285] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [    35.285] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [    35.285] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [    35.285] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [    35.286] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [    35.286] (II) "dri2" will be loaded by default.
    [    35.286] (II) LoadModule: "extmod"
    [    35.319] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [    35.384] (II) Module extmod: vendor="X.Org Foundation"
    [    35.384]    compiled for 1.12.1.902, module version = 1.0.0
    [    35.385]    Module class: X.Org Server Extension
    [    35.385]    ABI class: X.Org Server Extension, version 6.0
    [    35.385] (II) Loading extension SELinux
    [    35.385] (II) Loading extension MIT-SCREEN-SAVER
    [    35.385] (II) Loading extension XFree86-VidModeExtension
    [    35.385] (II) Loading extension XFree86-DGA
    [    35.385] (II) Loading extension DPMS
    [    35.385] (II) Loading extension XVideo
    [    35.385] (II) Loading extension XVideo-MotionCompensation
    [    35.385] (II) Loading extension X-Resource
    [    35.385] (II) LoadModule: "dbe"
    [    35.385] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [    35.405] (II) Module dbe: vendor="X.Org Foundation"
    [    35.405]    compiled for 1.12.1.902, module version = 1.0.0
    [    35.405]    Module class: X.Org Server Extension
    [    35.405]    ABI class: X.Org Server Extension, version 6.0
    [    35.405] (II) Loading extension DOUBLE-BUFFER
    [    35.405] (II) LoadModule: "vbe"
    [    35.405] (II) Loading /usr/lib/xorg/modules/libvbe.so
    [    35.446] (II) Module vbe: vendor="X.Org Foundation"
    [    35.446]    compiled for 1.12.1.902, module version = 1.1.0
    [    35.446]    ABI class: X.Org Video Driver, version 12.0
    [    35.446] (II) LoadModule: "record"
    [    35.446] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [    35.447] (II) Module record: vendor="X.Org Foundation"
    [    35.447]    compiled for 1.12.1.902, module version = 1.13.0
    [    35.447]    Module class: X.Org Server Extension
    [    35.447]    ABI class: X.Org Server Extension, version 6.0
    [    35.447] (II) Loading extension RECORD
    [    35.447] (II) LoadModule: "glx"
    [    35.447] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [    39.554] (II) Module glx: vendor="NVIDIA Corporation"
    [    39.554]    compiled for 4.0.2, module version = 1.0.0
    [    39.554]    Module class: X.Org Server Extension
    [    39.554] (II) NVIDIA GLX Module  302.17  Tue Jun 12 16:22:45 PDT 2012
    [    39.554] (II) Loading extension GLX
    [    39.554] (II) LoadModule: "xtrap"
    [    39.554] (WW) Warning, couldn't open module xtrap
    [    39.554] (II) UnloadModule: "xtrap"
    [    39.554] (II) Unloading xtrap
    [    39.554] (EE) Failed to load module "xtrap" (module does not exist, 0)
    [    39.554] (II) LoadModule: "dri"
    [    39.554] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [    39.657] (II) Module dri: vendor="X.Org Foundation"
    [    39.657]    compiled for 1.12.1.902, module version = 1.0.0
    [    39.657]    ABI class: X.Org Server Extension, version 6.0
    [    39.657] (II) Loading extension XFree86-DRI
    [    39.657] (II) LoadModule: "evdev"
    [    39.657] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    39.891] (II) Module evdev: vendor="X.Org Foundation"
    [    39.891]    compiled for 1.12.1, module version = 2.7.0
    [    39.891]    Module class: X.Org XInput Driver
    [    39.891]    ABI class: X.Org XInput driver, version 16.0
    [    39.891] (II) LoadModule: "evdev"
    [    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    39.891] (II) Module evdev: vendor="X.Org Foundation"
    [    39.891]    compiled for 1.12.1, module version = 2.7.0
    [    39.891]    Module class: X.Org XInput Driver
    [    39.891]    ABI class: X.Org XInput driver, version 16.0
    [    39.891] (II) LoadModule: "evdev"
    [    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    39.891] (II) Module evdev: vendor="X.Org Foundation"
    [    39.891]    compiled for 1.12.1, module version = 2.7.0
    [    39.891]    Module class: X.Org XInput Driver
    [    39.891]    ABI class: X.Org XInput driver, version 16.0
    [    39.891] (II) LoadModule: "evdev"
    [    39.891] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    39.891] (II) Module evdev: vendor="X.Org Foundation"
    [    39.891]    compiled for 1.12.1, module version = 2.7.0
    [    39.891]    Module class: X.Org XInput Driver
    [    39.891]    ABI class: X.Org XInput driver, version 16.0
    [    39.891] (II) LoadModule: "dri2"
    [    39.891] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    39.944] (II) Module dri2: vendor="X.Org Foundation"
    [    39.944]    compiled for 1.12.1.902, module version = 1.2.0
    [    39.944]    ABI class: X.Org Server Extension, version 6.0
    [    39.944] (II) Loading extension DRI2
    [    39.944] (II) LoadModule: "nvidia"
    [    39.945] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [    40.220] (II) Module nvidia: vendor="NVIDIA Corporation"
    [    40.220]    compiled for 4.0.2, module version = 1.0.0
    [    40.220]    Module class: X.Org Video Driver
    [    40.282] (II) LoadModule: "evdev"
    [    40.283] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [    40.283] (II) Module evdev: vendor="X.Org Foundation"
    [    40.283]    compiled for 1.12.1, module version = 2.7.0
    [    40.283]    Module class: X.Org XInput Driver
    [    40.283]    ABI class: X.Org XInput driver, version 16.0
    [    40.283] (II) NVIDIA dlloader X Driver  302.17  Tue Jun 12 16:04:53 PDT 2012
    [    40.283] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [    40.306] (++) using VT number 7
    
    [    40.336] (II) Loading sub module "fb"
    [    40.336] (II) LoadModule: "fb"
    [    40.336] (II) Loading /usr/lib/xorg/modules/libfb.so
    [    40.429] (II) Module fb: vendor="X.Org Foundation"
    [    40.429]    compiled for 1.12.1.902, module version = 1.0.0
    [    40.429]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    40.429] (II) Loading sub module "wfb"
    [    40.429] (II) LoadModule: "wfb"
    [    40.429] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [    40.550] (II) Module wfb: vendor="X.Org Foundation"
    [    40.550]    compiled for 1.12.1.902, module version = 1.0.0
    [    40.550]    ABI class: X.Org ANSI C Emulation, version 0.4
    [    40.550] (II) Loading sub module "ramdac"
    [    40.550] (II) LoadModule: "ramdac"
    [    40.550] (II) Module "ramdac" already built-in
    [    40.589] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [    40.589] (==) NVIDIA(0): RGB weight 888
    [    40.589] (==) NVIDIA(0): Default visual is TrueColor
    [    40.589] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [    40.589] (**) NVIDIA(0): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
    [    40.589] (**) NVIDIA(0): Enabling 2D acceleration
    [    41.550] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [    41.550] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [    41.551] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 470 (GF100) at PCI:1:0:0 (GPU-0)
    [    41.551] (--) NVIDIA(0): Memory: 1310720 kBytes
    [    41.551] (--) NVIDIA(0): VideoBIOS: 70.00.21.00.03
    [    41.551] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [    41.551] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [    41.557] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 470 at PCI:1:0:0
    [    41.557] (--) NVIDIA(0):     CRT-0
    [    41.557] (--) NVIDIA(0):     CRT-1
    [    41.557] (--) NVIDIA(0):     Samsung SyncMaster (DFP-0) (connected)
    [    41.557] (--) NVIDIA(0):     DFP-1
    [    41.557] (--) NVIDIA(0):     DFP-2
    [    41.557] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [    41.557] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [    41.557] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
    [    41.557] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
    [    41.557] (--) NVIDIA(0): DFP-1: 165.0 MHz maximum pixel clock
    [    41.557] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [    41.557] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
    [    41.557] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
    [    41.557] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    41.557] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [    41.557] (**) NVIDIA(0):     has been enabled on all display devices.)
    [    41.558] (II) NVIDIA(0): Validated modes:
    [    41.558] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select+0+0"
    [    41.558] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [    41.585] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
    [    41.585] (--) NVIDIA(0):     option
    [    41.585] (--) Depth 24 pixmap format is 32 bpp
    [    41.585] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
    [    41.585] (II) NVIDIA:     access.
    [    41.589] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select+0+0"
    [    41.627] (II) Loading extension NV-GLX
    [    41.707] (==) NVIDIA(0): Disabling shared memory pixmaps
    [    41.707] (==) NVIDIA(0): Backing store disabled
    [    41.707] (==) NVIDIA(0): Silken mouse enabled
    [    41.708] (**) NVIDIA(0): DPMS enabled
    [    41.708] (II) Loading extension NV-CONTROL
    [    41.708] (II) Loading extension XINERAMA
    [    41.708] (II) Loading sub module "dri2"
    [    41.708] (II) LoadModule: "dri2"
    [    41.708] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [    41.709] (II) Module dri2: vendor="X.Org Foundation"
    [    41.709]    compiled for 1.12.1.902, module version = 1.2.0
    [    41.709]    ABI class: X.Org Server Extension, version 6.0
    [    41.709] (II) NVIDIA(0): [DRI2] Setup complete
    [    41.709] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
    [    41.709] (--) RandR disabled
    [    41.709] (II) Initializing built-in extension Generic Event Extension
    [    41.709] (II) Initializing built-in extension SHAPE
    [    41.709] (II) Initializing built-in extension MIT-SHM
    [    41.709] (II) Initializing built-in extension XInputExtension
    [    41.709] (II) Initializing built-in extension XTEST
    [    41.709] (II) Initializing built-in extension BIG-REQUESTS
    [    41.709] (II) Initializing built-in extension SYNC
    [    41.709] (II) Initializing built-in extension XKEYBOARD
    [    41.709] (II) Initializing built-in extension XC-MISC
    [    41.709] (II) Initializing built-in extension SECURITY
    [    41.709] (II) Initializing built-in extension XINERAMA
    [    41.709] (II) Initializing built-in extension XFIXES
    [    41.709] (II) Initializing built-in extension RENDER
    [    41.709] (II) Initializing built-in extension RANDR
    [    41.709] (II) Initializing built-in extension COMPOSITE
    [    41.709] (II) Initializing built-in extension DAMAGE
    [    41.709] (II) SELinux: Disabled on system
    [    41.711] (II) Initializing extension GLX
    [    42.085] (II) Using input driver 'evdev' for 'Keyboard0'
    [    42.085] (**) Option "CoreKeyboard"
    [    42.085] (**) Keyboard0: always reports core events
    [    42.085] (**) evdev: Keyboard0: Device: "/dev/input/event3"
    [    42.086] (--) evdev: Keyboard0: Vendor 0 Product 0x1
    [    42.086] (--) evdev: Keyboard0: Found keys
    [    42.086] (II) evdev: Keyboard0: Configuring as keyboard
    [    42.086] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 6)
    [    42.086] (**) Option "xkb_rules" "evdev"
    [    42.086] (**) Option "xkb_model" "evdev"
    [    42.086] (**) Option "xkb_layout" "us"
    [    42.111] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [    42.111] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    42.111] (II) Using input driver 'evdev' for 'Power Button'
    [    42.111] (**) Power Button: always reports core events
    [    42.111] (**) evdev: Power Button: Device: "/dev/input/event3"
    [    42.111] (WW) evdev: Power Button: device file is duplicate. Ignoring.
    [    42.140] (EE) PreInit returned 8 for "Power Button"
    [    42.140] (II) UnloadModule: "evdev"
    [    42.140] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [    42.140] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [    42.140] (II) Using input driver 'evdev' for 'Power Button'
    [    42.140] (**) Power Button: always reports core events
    [    42.140] (**) evdev: Power Button: Device: "/dev/input/event2"
    [    42.140] (--) evdev: Power Button: Vendor 0 Product 0x1
    [    42.140] (--) evdev: Power Button: Found keys
    [    42.140] (II) evdev: Power Button: Configuring as keyboard
    [    42.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [    42.140] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [    42.140] (**) Option "xkb_rules" "evdev"
    [    42.140] (**) Option "xkb_model" "pc105"
    [    42.140] (**) Option "xkb_layout" "cz"
    [    42.163] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event6)
    [    42.163] (II) No input driver specified, ignoring this device.
    [    42.163] (II) This device may have been added with another device file.
    [    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event7)
    [    42.164] (II) No input driver specified, ignoring this device.
    [    42.164] (II) This device may have been added with another device file.
    [    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event8)
    [    42.164] (II) No input driver specified, ignoring this device.
    [    42.164] (II) This device may have been added with another device file.
    [    42.164] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event9)
    [    42.164] (II) No input driver specified, ignoring this device.
    [    42.164] (II) This device may have been added with another device file.
    [    42.164] (II) config/udev: Adding input device sonixb (/dev/input/event5)
    [    42.164] (**) sonixb: Applying InputClass "evdev keyboard catchall"
    [    42.164] (II) Using input driver 'evdev' for 'sonixb'
    [    42.164] (**) sonixb: always reports core events
    [    42.164] (**) evdev: sonixb: Device: "/dev/input/event5"
    [    42.165] (--) evdev: sonixb: Vendor 0xc45 Product 0x602c
    [    42.165] (--) evdev: sonixb: Found keys
    [    42.165] (II) evdev: sonixb: Configuring as keyboard
    [    42.165] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.1/input/input5/event5"
    [    42.165] (II) XINPUT: Adding extended input device "sonixb" (type: KEYBOARD, id 8)
    [    42.165] (**) Option "xkb_rules" "evdev"
    [    42.165] (**) Option "xkb_model" "pc105"
    [    42.165] (**) Option "xkb_layout" "cz"
    [    42.165] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/event0)
    [    42.165] (**) Genius Optical Mouse: Applying InputClass "evdev pointer catchall"
    [    42.165] (II) Using input driver 'evdev' for 'Genius Optical Mouse'
    [    42.165] (**) Genius Optical Mouse: always reports core events
    [    42.165] (**) evdev: Genius Optical Mouse: Device: "/dev/input/event0"
    [    42.165] (--) evdev: Genius Optical Mouse: Vendor 0x458 Product 0x3a
    [    42.165] (--) evdev: Genius Optical Mouse: Found 3 mouse buttons
    [    42.165] (--) evdev: Genius Optical Mouse: Found scroll wheel(s)
    [    42.165] (--) evdev: Genius Optical Mouse: Found relative axes
    [    42.165] (--) evdev: Genius Optical Mouse: Found x and y relative axes
    [    42.165] (II) evdev: Genius Optical Mouse: Configuring as mouse
    [    42.165] (II) evdev: Genius Optical Mouse: Adding scrollwheel support
    [    42.165] (**) evdev: Genius Optical Mouse: YAxisMapping: buttons 4 and 5
    [    42.165] (**) evdev: Genius Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    42.166] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input11/event0"
    [    42.166] (II) XINPUT: Adding extended input device "Genius Optical Mouse" (type: MOUSE, id 9)
    [    42.166] (II) evdev: Genius Optical Mouse: initialized for relative axes.
    [    42.166] (**) Genius Optical Mouse: (accel) keeping acceleration scheme 1
    [    42.166] (**) Genius Optical Mouse: (accel) acceleration profile 0
    [    42.166] (**) Genius Optical Mouse: (accel) acceleration factor: 2.000
    [    42.166] (**) Genius Optical Mouse: (accel) acceleration threshold: 4
    [    42.166] (II) config/udev: Adding input device Genius Optical Mouse (/dev/input/mouse0)
    [    42.166] (II) No input driver specified, ignoring this device.
    [    42.166] (II) This device may have been added with another device file.
    [    42.167] (II) config/udev: Adding input device SIGMACH1P USB Keykoard (/dev/input/event1)
    [    42.167] (**) SIGMACH1P USB Keykoard: Applying InputClass "evdev keyboard catchall"
    [    42.167] (II) Using input driver 'evdev' for 'SIGMACH1P USB Keykoard'
    [    42.167] (**) SIGMACH1P USB Keykoard: always reports core events
    [    42.167] (**) evdev: SIGMACH1P USB Keykoard: Device: "/dev/input/event1"
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Vendor 0x1c4f Product 0xe
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found keys
    [    42.167] (II) evdev: SIGMACH1P USB Keykoard: Configuring as keyboard
    [    42.167] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.0/input/input1/event1"
    [    42.167] (II) XINPUT: Adding extended input device "SIGMACH1P USB Keykoard" (type: KEYBOARD, id 10)
    [    42.167] (**) Option "xkb_rules" "evdev"
    [    42.167] (**) Option "xkb_model" "pc105"
    [    42.167] (**) Option "xkb_layout" "cz"
    [    42.167] (II) config/udev: Adding input device SIGMACH1P USB Keykoard (/dev/input/event10)
    [    42.167] (**) SIGMACH1P USB Keykoard: Applying InputClass "evdev keyboard catchall"
    [    42.167] (II) Using input driver 'evdev' for 'SIGMACH1P USB Keykoard'
    [    42.167] (**) SIGMACH1P USB Keykoard: always reports core events
    [    42.167] (**) evdev: SIGMACH1P USB Keykoard: Device: "/dev/input/event10"
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Vendor 0x1c4f Product 0xe
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found 1 mouse buttons
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found scroll wheel(s)
    [    42.167] (--) evdev: SIGMACH1P USB Keykoard: Found relative axes
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: Forcing relative x/y axes to exist.
    [    42.168] (--) evdev: SIGMACH1P USB Keykoard: Found absolute axes
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: Forcing absolute x/y axes to exist.
    [    42.168] (--) evdev: SIGMACH1P USB Keykoard: Found keys
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: Configuring as mouse
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: Configuring as keyboard
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: Adding scrollwheel support
    [    42.168] (**) evdev: SIGMACH1P USB Keykoard: YAxisMapping: buttons 4 and 5
    [    42.168] (**) evdev: SIGMACH1P USB Keykoard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [    42.168] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4:1.1/input/input10/event10"
    [    42.168] (II) XINPUT: Adding extended input device "SIGMACH1P USB Keykoard" (type: KEYBOARD, id 11)
    [    42.168] (**) Option "xkb_rules" "evdev"
    [    42.168] (**) Option "xkb_model" "pc105"
    [    42.168] (**) Option "xkb_layout" "cz"
    [    42.168] (II) evdev: SIGMACH1P USB Keykoard: initialized for relative axes.
    [    42.168] (WW) evdev: SIGMACH1P USB Keykoard: ignoring absolute axes.
    [    42.168] (**) SIGMACH1P USB Keykoard: (accel) keeping acceleration scheme 1
    [    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration profile 0
    [    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration factor: 2.000
    [    42.168] (**) SIGMACH1P USB Keykoard: (accel) acceleration threshold: 4
    [    42.168] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [    42.169] (II) No input driver specified, ignoring this device.
    [    42.169] (II) This device may have been added with another device file.
    [    80.328] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [    80.328] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [    80.328] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    80.328] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [    80.328] (**) NVIDIA(0):     has been enabled on all display devices.)
    [    80.947] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [    80.947] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [    80.947] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    80.947] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [    80.947] (**) NVIDIA(0):     has been enabled on all display devices.)
    [    84.964] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [    84.964] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [    84.964] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [    84.964] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [    84.964] (**) NVIDIA(0):     has been enabled on all display devices.)
    [   623.004] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [   623.004] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [   623.004] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   623.004] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [   623.004] (**) NVIDIA(0):     has been enabled on all display devices.)
    [   623.075] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [   623.075] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [   623.075] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   623.075] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [   623.075] (**) NVIDIA(0):     has been enabled on all display devices.)
    [   623.132] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [   623.132] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [   623.132] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   623.132] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [   623.132] (**) NVIDIA(0):     has been enabled on all display devices.)
    [   647.427] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [   647.427] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [   647.427] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [   647.427] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [   647.427] (**) NVIDIA(0):     has been enabled on all display devices.)
    [ 13996.226] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
    [ 13996.226] (II) NVIDIA(GPU-0):     3D Vision stereo.
    [ 13996.226] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 13996.226] (**) NVIDIA(0):     device Samsung SyncMaster (DFP-0) (Using EDID frequencies
    [ 13996.226] (**) NVIDIA(0):     has been enabled on all display devices.)
    
    1.7.2012 13:35 Martin Landa | skóre: 6
    Rozbalit Rozbalit vše Re: debian sid: problem s nvidia 302.17
    samozrejme, ze neni tajny ;-) kazdopadne IgnoreABI nema u me zadny ucinek
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder75)  Wed Jun  2 00:20:35 PDT 2010
    
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings:  version 1.0  (buildmeister@builder75)  Wed Jun  2 00:21:51 PDT 2010
    
    Section "Module"  
            Load "evdev"  
    EndSection
    
    Section "ServerFlags"
        Option "BlankTime"   "0"
        Option "StandbyTime" "0"
        Option "SuspendTime" "0"
        Option "OffTime"     "0"
    EndSection
    
    Section "ServerLayout"
        Identifier     "Layout0"
        Screen      0  "Screen0" 0 0
        InputDevice    "Keyboard0" "CoreKeyboard"
        InputDevice    "Mouse0" "CorePointer"
        Option         "Xinerama"       "0"
        Option         "AutoAddDevices" "0"
    EndSection
    
    Section "Files"
        FontPath        "/usr/share/fonts/X11/misc"
        FontPath        "/usr/share/fonts/X11/100dpi:unscaled"
        FontPath        "/usr/share/fonts/X11/75dpi:unscaled"
        FontPath        "/usr/share/fonts/X11/Type1"
        FontPath        "/usr/local/share/fonts"
    EndSection
    
    Section "InputDevice"
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/psaux"
        Option         "Emulate3Buttons" "no"
        Option         "ZAxisMapping" "4 5"
    EndSection
    
    Section "InputDevice"
        Identifier     "Keyboard0"
        Driver         "keyboard"
        Option         "CoreKeyboard"
        Option         "XkbRules"    "xorg"
        Option         "XkbModel"    "pc105"
        Option         "XkbLayout"   "us,cz"
        Option         "XkbVariant"  "qwerty_bksl"
        Option         "XkbOptions"  "grp:lwin_toggle"
    EndSection
    
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Unknown"
        ModelName      "LGD"
        HorizSync       44.5 - 66.7
        VertRefresh     40.0 - 60.0
        Option         "DPMS" "false"
    EndSection
    
    Section "Device"
        Identifier     "Device0"
        Driver         "nvidia"
        VendorName     "NVIDIA Corporation"
        BoardName      "NVS 3100M"
    EndSection
    
    Section "Screen"
        Identifier     "Screen0"
        Device         "Device0"
        Monitor        "Monitor0"
        DefaultDepth    24
        Option         "UseEdidDpi" "false"
        Option         "DPI" "96 x 96"
        SubSection     "Display"
            Depth       24
    	Modes       "1440x900"
        EndSubSection
    EndSection
    

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.