abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×

dnes 13:53 | Nová verze

Simon Long představil na blogu Raspberry Pi novou verzi 2017-06-21 linuxové distribuce Raspbian určené především pro jednodeskové miniaturní počítače Raspberry Pi. Společně s Raspbianem byl aktualizován také instalační nástroj NOOBS (New Out Of the Box Software). Z novinek lze zdůraznit IDE Thonny pro vývoj v programovacím jazyce Python a především offline verzi Scratche 2.0. Ten bylo dosud možné používat pouze online. Offline bylo možné používat pouze Scratch ve verzi 1.4. Z nového Scratchu lze ovládat také GPIO piny. Scratch 2.0 vyžaduje Flash.

Ladislav Hagara | Komentářů: 0
včera 14:24 | Nová verze

Opera 46, verze 46.0.2597.26, byla prohlášena za stabilní. Nejnovější verze tohoto webového prohlížeče je postavena na Chromiu 59. Z novinek lze zmínit například podporu APNG (Animated Portable Network Graphics). Přehled novinek pro vývojáře na blogu Dev.Opera. Oznámení o vydání zmiňuje také první televizní reklamu.

Ladislav Hagara | Komentářů: 0
včera 13:37 | IT novinky

I čtenáři AbcLinuxu před dvěma lety vyplňovali dotazníky věnované Retro ThinkPadu. Nyní bylo potvrzeno, že iniciativa Retro ThinkPad je stále naživu a Lenovo připravuje speciální edici ThinkPadu jako součást oslav jeho 25. výročí.

Ladislav Hagara | Komentářů: 14
včera 10:22 | Komunita

Bylo oznámeno, že frontend a runtime programovacího jazyka D bude začleněn do kolekce kompilátorů GCC (GNU Compiler Collection). Správcem byl ustanoven Iain Buclaw.

Ladislav Hagara | Komentářů: 4
21.6. 18:47 | IT novinky
Bulharská firma Olimex je známá jako výrobce kvalitních mini arm desek, u nichž se snaží být maximálně open source. Kromě velké otevřenosti taktéž zaručují dlouhodobou podporu výroby, což je vítáno ve firemním prostředí. Nyní firma ohlásila ESP32-GATEWAY, malou IoT desku s Wifi, Bluetooth, Ethernetem a 20 GPIO porty za 22EUR. Tato malá deska je ořezanou verzí ESP32-EVB.
Max | Komentářů: 20
21.6. 18:00 | Zajímavý článek

LinuxGizmos (v dubnu loňského roku přejmenován na HackerBoards a v lednu letošního roku zpět na LinuxGizmos) zveřejnil výsledky čtenářské ankety o nejoblíbenější jednodeskový počítač (SBC) v roce 2017. Letos se vybíralo z 98 jednodeskových počítačů (Tabulky Google). Nejoblíbenějšími jednodeskovými počítači v letošním roce jsou Raspberry Pi 3 Model B, Raspberry Pi Zero W a Raspberry Pi 2 Model B.

Ladislav Hagara | Komentářů: 0
21.6. 14:22 | Pozvánky

Ne-konference jOpenSpace 2017 se koná od 13. do 15. října 2017 v hotelu Farma u Pelhřimova. Registrace účastníků je nutná. Více informací na stránkách ne-konference.

Zdenek H. | Komentářů: 0
21.6. 14:11 | Nová verze

Vyšla nová verze 1.2 audio kodeku Opus, která přináší mnoho drobných optimalizací a tím i celkové vylepšení poměru bitrate/kvalita. Fullband (do 20 kHz) stereo hudba je možná již od 32 kbit/s, fullband mono řeč již od 14 kbit/s. Více informací sepsal vývojář Opusu J. M. Valin formou již tradiční demo stránky.

Petr Tomášek | Komentářů: 20
21.6. 14:00 | Zajímavý článek

Na MojeFedora.cz byl zveřejněn překlad příspěvku na blogu Christiana Schallera, vedoucího desktopového týmu v Red Hatu, v němž se zabývá novinkami ve Fedoře Workstation 26 a následujících vydáních. Například již ve Fedoře 27 by se měl objevit jednotný server pro audio a video v Linuxu PipeWire. Ten byl představen před dvěma lety. Tenkrát ještě pod názvem Pinos (PulseVideo).

Ladislav Hagara | Komentářů: 0
21.6. 05:55 | Bezpečnostní upozornění

V KMailu byla nalezena a opravena bezpečnostní chyba CVE-2017-9604 týkající se uživatelů, již své maily podepisují a šifrují pomocí OpenPGP. Pokud uživatel KMailu při odesílání mailu zvolil možnost Odeslat později, tak byl mail odeslán nepodepsaný a v otevřeném tvaru.

Ladislav Hagara | Komentářů: 15
Chystáte se pořídit CPU AMD Ryzen?
 (6%)
 (31%)
 (1%)
 (9%)
 (44%)
 (9%)
Celkem 822 hlasů
 Komentářů: 65, poslední 1.6. 19:16
    Rozcestník

    Dotaz: Problem s 3 dny starym diskem:-(

    15.10.2013 10:21 Tommy
    Problem s 3 dny starym diskem:-(
    Přečteno: 818×
    Ahoj. Pred tydnem jsem tady resil, jaky mam koupit disk do RAID1. Nakonec jsem se rozhodl pro WD RED. Po třech dnech mi vypadl z RAIDu, nevidi ho ani fdisk a log mam plny techto hlasek:
    [  891.721684]          res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  891.726233] ata1.00: status: { DRDY }
    [  891.728495] ata1.00: failed command: WRITE FPDMA QUEUED
    [  891.730745] ata1.00: cmd 61/80:78:00:5a:38/00:00:00:00:00/40 tag 15 ncq 65536 out
    [  891.730747]          res 40/00:1c:00:5b:38/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  891.735290] ata1.00: status: { DRDY }
    [  891.737526] ata1: hard resetting link
    [  892.336019] ata1: SATA link up unknown (SStatus 103 SControl 310)
    [  892.336971] ata1.00: configured for UDMA/133
    [  892.336991] ata1: EH complete
    [  895.032839] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x400000 action 0x6 frozen
    [  895.033296] ata1.00: irq_stat 0x08000000, interface fatal error
    [  895.035291] ata1: SError: { Handshk }
    [  895.037539] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.039776] ata1.00: cmd 61/00:00:80:0b:39/01:00:00:00:00/40 tag 0 ncq 131072 out
    [  895.039778]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.044340] ata1.00: status: { DRDY }
    [  895.046562] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.048835] ata1.00: cmd 61/80:08:80:0c:39/00:00:00:00:00/40 tag 1 ncq 65536 out
    [  895.048837]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.053363] ata1.00: status: { DRDY }
    [  895.055598] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.057873] ata1.00: cmd 61/00:10:00:03:39/04:00:00:00:00/40 tag 2 ncq 524288 out
    [  895.057874]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.062434] ata1.00: status: { DRDY }
    [  895.064663] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.066912] ata1.00: cmd 61/00:18:00:07:39/03:00:00:00:00/40 tag 3 ncq 393216 out
    [  895.066914]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.071451] ata1.00: status: { DRDY }
    [  895.073697] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.075953] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
    [  895.075954]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.080508] ata1.00: status: { DRDY }
    [  895.082751] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.085005] ata1.00: cmd 61/80:28:00:0e:39/00:00:00:00:00/40 tag 5 ncq 65536 out
    [  895.085006]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.089548] ata1.00: status: { DRDY }
    [  895.091772] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.094042] ata1.00: cmd 61/80:30:80:0a:39/00:00:00:00:00/40 tag 6 ncq 65536 out
    [  895.094044]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.098589] ata1.00: status: { DRDY }
    [  895.100828] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.103062] ata1.00: cmd 61/80:38:00:0b:39/00:00:00:00:00/40 tag 7 ncq 65536 out
    [  895.103063]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.107626] ata1.00: status: { DRDY }
    [  895.109864] ata1.00: failed command: WRITE FPDMA QUEUED
    [  895.112123] ata1.00: cmd 61/00:40:00:0d:39/01:00:00:00:00/40 tag 8 ncq 131072 out
    [  895.112125]          res 40/00:44:00:0d:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  895.116668] ata1.00: status: { DRDY }
    [  895.118903] ata1: hard resetting link
    [  895.600024] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  900.600021] ata1.00: qc timeout (cmd 0xec)
    [  900.600027] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  900.600030] ata1.00: revalidation failed (errno=-5)
    [  900.600476] ata1: hard resetting link
    [  901.084017] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  911.084017] ata1.00: qc timeout (cmd 0xec)
    [  911.084023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  911.084026] ata1.00: revalidation failed (errno=-5)
    [  911.084476] ata1: hard resetting link
    [  911.568016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  911.568993] ata1.00: configured for UDMA/133
    [  911.569008] ata1: EH complete
    [  911.569045] ata1.00: exception Emask 0x10 SAct 0x3f SErr 0x1800000 action 0x6 frozen
    [  911.569490] ata1.00: irq_stat 0x08000000, interface fatal error
    [  911.571392] ata1: SError: { LinkSeq TrStaTrns }
    [  911.573627] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.575839] ata1.00: cmd 61/00:00:00:0d:39/01:00:00:00:00/40 tag 0 ncq 131072 out
    [  911.575840]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.580317] ata1.00: status: { DRDY }
    [  911.582524] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.584756] ata1.00: cmd 61/80:08:00:0b:39/00:00:00:00:00/40 tag 1 ncq 65536 out
    [  911.584757]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.589205] ata1.00: status: { DRDY }
    [  911.591407] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.593628] ata1.00: cmd 61/80:10:80:0a:39/00:00:00:00:00/40 tag 2 ncq 65536 out
    [  911.593629]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.598087] ata1.00: status: { DRDY }
    [  911.600301] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.602504] ata1.00: cmd 61/80:18:00:0e:39/00:00:00:00:00/40 tag 3 ncq 65536 out
    [  911.602505]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.606969] ata1.00: status: { DRDY }
    [  911.609157] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.611365] ata1.00: cmd 61/80:20:00:0a:39/00:00:00:00:00/40 tag 4 ncq 65536 out
    [  911.611366]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.615820] ata1.00: status: { DRDY }
    [  911.618022] ata1.00: failed command: WRITE FPDMA QUEUED
    [  911.620212] ata1.00: cmd 61/00:28:00:07:39/03:00:00:00:00/40 tag 5 ncq 393216 out
    [  911.620214]          res 40/00:0c:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  911.624627] ata1.00: status: { DRDY }
    [  911.626818] ata1: hard resetting link
    [  912.108019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  917.108019] ata1.00: qc timeout (cmd 0xec)
    [  917.108025] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  917.108028] ata1.00: revalidation failed (errno=-5)
    [  917.108471] ata1: hard resetting link
    [  917.592019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  917.593025] ata1.00: configured for UDMA/133
    [  917.593042] ata1: EH complete
    [  917.593127] ata1.00: exception Emask 0x10 SAct 0x1ff SErr 0x1c00000 action 0x6 frozen
    [  917.593568] ata1.00: irq_stat 0x08000000, interface fatal error
    [  917.595445] ata1: SError: { Handshk LinkSeq TrStaTrns }
    [  917.597655] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.599852] ata1.00: cmd 61/00:00:00:07:39/03:00:00:00:00/40 tag 0 ncq 393216 out
    [  917.599853]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.604265] ata1.00: status: { DRDY }
    [  917.606454] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.608665] ata1.00: cmd 61/80:08:00:0a:39/00:00:00:00:00/40 tag 1 ncq 65536 out
    [  917.608667]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.613086] ata1.00: status: { DRDY }
    [  917.615274] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.617489] ata1.00: cmd 61/80:10:00:0e:39/00:00:00:00:00/40 tag 2 ncq 65536 out
    [  917.617490]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.621895] ata1.00: status: { DRDY }
    [  917.624105] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.626290] ata1.00: cmd 61/80:18:80:0a:39/00:00:00:00:00/40 tag 3 ncq 65536 out
    [  917.626292]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.630722] ata1.00: status: { DRDY }
    [  917.632948] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.635118] ata1.00: cmd 61/80:20:00:0b:39/00:00:00:00:00/40 tag 4 ncq 65536 out
    [  917.635120]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.639537] ata1.00: status: { DRDY }
    [  917.641716] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.643913] ata1.00: cmd 61/00:28:00:0d:39/01:00:00:00:00/40 tag 5 ncq 131072 out
    [  917.643915]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.648336] ata1.00: status: { DRDY }
    [  917.650517] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.652735] ata1.00: cmd 61/00:30:00:03:39/04:00:00:00:00/40 tag 6 ncq 524288 out
    [  917.652737]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.657140] ata1.00: status: { DRDY }
    [  917.659315] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.661532] ata1.00: cmd 61/80:38:80:0c:39/00:00:00:00:00/40 tag 7 ncq 65536 out
    [  917.661533]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.665959] ata1.00: status: { DRDY }
    [  917.668179] ata1.00: failed command: WRITE FPDMA QUEUED
    [  917.670392] ata1.00: cmd 61/00:40:80:0b:39/01:00:00:00:00/40 tag 8 ncq 131072 out
    [  917.670394]          res 40/00:24:00:0b:39/00:00:00:00:00/40 Emask 0x10 (ATA bus error)
    [  917.674850] ata1.00: status: { DRDY }
    [  917.677075] ata1: hard resetting link
    [  918.160018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  918.160532] ata1.00: failed to set xfermode (err_mask=0x100)
    [  923.160018] ata1: hard resetting link
    [  923.644018] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  928.644017] ata1.00: qc timeout (cmd 0xec)
    [  928.644023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  928.644026] ata1.00: revalidation failed (errno=-5)
    [  928.644464] ata1: hard resetting link
    [  929.128014] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  939.128017] ata1.00: qc timeout (cmd 0xec)
    [  939.128023] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  939.128026] ata1.00: revalidation failed (errno=-5)
    [  939.128457] ata1.00: disabled
    [  939.128478] ata1: hard resetting link
    [  939.612016] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
    [  939.612032] ata1: EH complete
    [  939.612053] sd 0:0:0:0: [sda] Unhandled error code
    [  939.612055] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.612058] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 80 00 01 00 00
    [  939.612066] end_request: I/O error, dev sda, sector 3738496
    [  939.612472] raid1: Disk failure on sda2, disabling device.
    [  939.612474] raid1: Operation continuing on 1 devices.
    [  939.616545] sd 0:0:0:0: [sda] Unhandled error code
    [  939.616547] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.616550] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0c 80 00 00 80 00
    [  939.616557] end_request: I/O error, dev sda, sector 3738752
    [  939.618691] sd 0:0:0:0: [sda] Unhandled error code
    [  939.618693] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.618696] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 03 00 00 04 00 00
    [  939.618703] end_request: I/O error, dev sda, sector 3736320
    [  939.620892] sd 0:0:0:0: [sda] Unhandled error code
    [  939.620894] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.620897] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0d 00 00 01 00 00
    [  939.620904] end_request: I/O error, dev sda, sector 3738880
    [  939.622856] sd 0:0:0:0: [sda] Unhandled error code
    [  939.622859] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.622862] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0b 00 00 00 80 00
    [  939.622868] end_request: I/O error, dev sda, sector 3738368
    [  939.624949] sd 0:0:0:0: [sda] Unhandled error code
    [  939.624951] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.624954] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 80 00 00 80 00
    [  939.624961] end_request: I/O error, dev sda, sector 3738240
    [  939.626995] sd 0:0:0:0: [sda] Unhandled error code
    [  939.626997] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.627000] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 00 00 00 80 00
    [  939.627007] end_request: I/O error, dev sda, sector 3739136
    [  939.629048] sd 0:0:0:0: [sda] Unhandled error code
    [  939.629050] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.629053] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0a 00 00 00 80 00
    [  939.629059] end_request: I/O error, dev sda, sector 3738112
    [  939.631057] sd 0:0:0:0: [sda] Unhandled error code
    [  939.631059] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.631062] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 07 00 00 03 00 00
    [  939.631068] end_request: I/O error, dev sda, sector 3737344
    [  939.633079] sd 0:0:0:0: [sda] Unhandled error code
    [  939.633081] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.633084] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 00 39 0e 80 00 04 00 00
    [  939.633091] end_request: I/O error, dev sda, sector 3739264
    [  939.635040] sd 0:0:0:0: [sda] Unhandled error code
    [  939.635042] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.635045] sd 0:0:0:0: [sda] CDB: Write(10): 2a 00 e8 da 7d 00 00 00 08 00
    [  939.635052] end_request: I/O error, dev sda, sector 3906632960
    [  939.636914] end_request: I/O error, dev sda, sector 3906632960
    [  939.638793] md: super_written gets error=-5, uptodate=0
    [  939.639088] md: md1: recovery done.
    [  939.639523] sd 0:0:0:0: [sda] READ CAPACITY(16) failed
    [  939.639526] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.639529] sd 0:0:0:0: [sda] Sense not available.
    [  939.639551] sd 0:0:0:0: [sda] READ CAPACITY failed
    [  939.639553] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  939.639556] sd 0:0:0:0: [sda] Sense not available.
    [  939.639587] sd 0:0:0:0: [sda] Asking for cache data failed
    [  939.640681] sd 0:0:0:0: [sda] Assuming drive cache: write through
    [  939.642601] sda: detected capacity change from 2000398934016 to 0
    [  939.870509] RAID1 conf printout:
    [  939.870513]  --- wd:1 rd:2
    [  939.870517]  disk 0, wo:1, o:0, dev:sda2
    [  939.870520]  disk 1, wo:0, o:1, dev:sdb2
    [  939.870522] RAID1 conf printout:
    [  939.870523]  --- wd:1 rd:2
    [  939.870525]  disk 1, wo:0, o:1, dev:sdb2
    [ 1178.273762] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1178.285951] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1178.285992] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1178.286005] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1238.132096] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1238.132122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1238.132138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1238.132150] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1298.354097] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1298.354122] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1298.354137] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1298.354148] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1598.277466] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1598.277491] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1598.277506] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1598.277517] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1829.752018] [drm] nouveau 0000:00:12.0: Setting dpms mode 1 on vga encoder (output 0)
    [ 1897.954560] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1897.954585] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1897.954600] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 1897.954612] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 2198.089138] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 2198.089163] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 2198.089178] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    [ 2198.089190] program smartctl is using a deprecated SCSI ioctl, please convert it to SG_IO
    Je problem opravdu s diskem nebo to muze byt deskou (radicem)? Ale na te same mam puvodni Seagate a ten jede /zatim/ v pohode. Mam ho reklamovat?

    Diky moc.

    Odpovědi

    15.10.2013 10:28 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    smartctl -d sat -a /dev/sda

    vypise co? Je mozne, ze pro provedeni toho prikazu muze byt potreba nejprve masinu restartovat, aby se disk opet chytil.
    15.10.2013 10:33 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Tak restartuju a pak poslu vypis. Snad se tam ten disk zase ukaze.
    15.10.2013 10:39 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
    Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD20EFRX-68EUZN0
    Serial Number:    WD-WCC4M0120830
    Firmware Version: 80.00A80
    User Capacity:    2 000 398 934 016 bytes
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   9
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Tue Oct 15 10:38:24 2013 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x00) Offline data collection activity
                                            was never started.
                                            Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                                            without error or no self-test has ever
                                            been run.
    Total time to complete Offline
    data collection:                 (27720) seconds.
    Offline data collection
    capabilities:                    (0x7b) SMART execute Offline immediate.
                                            Auto Offline data collection on/off support.
                                            Suspend Offline collection upon new
                                            command.
                                            Offline surface scan supported.
                                            Self-test supported.
                                            Conveyance Self-test supported.
                                            Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                                            power-saving mode.
                                            Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                                            General Purpose Logging supported.
    Short self-test routine
    recommended polling time:        (   2) minutes.
    Extended self-test routine
    recommended polling time:        ( 255) minutes.
    Conveyance self-test routine
    recommended polling time:        (   5) minutes.
    SCT capabilities:              (0x703d) SCT Status supported.
                                            SCT Error Recovery Control supported.
                                            SCT Feature Control supported.
                                            SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
      3 Spin_Up_Time            0x0027   100   253   021    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       2
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       113
     10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       1
    193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       0
    194 Temperature_Celsius     0x0022   110   103   000    Old_age   Always       -       37
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
    200 Multi_Zone_Error_Rate   0x0008   100   253   000    Old_age   Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    No self-tests have been logged.  [To run self-tests, use: smartctl -t]
    
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    15.10.2013 10:45 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    viz komentar dole, je to kabel:
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
    Luboš Doležel (Doli) avatar 15.10.2013 10:39 Luboš Doležel (Doli) | skóre: 98 | blog: Doliho blog | Kladensko
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Je kabel zapojený dobře?
    15.10.2013 10:49 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Doufám, že ano. Teď nemám k serveru přístup, podívám se večer. Ale zapojoval jsem ho v sobotu ráno a do dnešního rána vše jelo ok a se serverem nikdo nemanipuloval.
    15.10.2013 10:53 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    vadny kabel (pokud tedy neni uplne preseknuty) se projevuje prave takto, ze dochazi k vypadkum v datech. Naprostou vetsinu dokaze odchytit CRC a tak neni problem zaznamenan, az kdyz uz to CRC nezvladne. Doporucuju ten kabel vymenit za novy.
    15.10.2013 11:38 Petr Šobáň | skóre: 79 | blog: soban | Olomouc
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Přesně vypadá to na kabel takže dát nový a skontrolovat konektory na MB a HDD.
    15.10.2013 11:43 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    To jste mě potěšili, tak snad to bude ono :-) Ale jak říkám, zajímavé je, že ty 3 dny to jelo bez sebemenších problémů. Synchronizace RAIDu atd.. Ale stát se může cokoliv. Díky, dám vědět, jak jsem dopadl.
    Josef Kufner avatar 15.10.2013 11:45 Josef Kufner | skóre: 67
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Disky a ventilátory vytvářejí vibrace, které mohly uvolnit mizerný spoj a prostě jim to chvíli trvalo.
    Hello world ! Segmentation fault (core dumped)
    15.10.2013 12:14 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Taky mě to pak docvaklo, že by to mohlo být vibracema:-)
    15.10.2013 11:48 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Ještě se zeptám k tomu kabelu. Mám jich doma spousty použitých, ale nemám koupit radši nějaký nový. Existuje nějaký lepší, nebo je to úplně fuk?
    Josef Kufner avatar 15.10.2013 11:54 Josef Kufner | skóre: 67
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Neber ten nejlevnější. Použitý nebo nový, na tom nezáleží. Hlavně aby byl v pořádku a nebyl to ošizený šmejd.
    Hello world ! Segmentation fault (core dumped)
    15.10.2013 12:13 R
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Daj tam lubovolny pouzity a sleduj, co bude robit. Ja som sa stretol s vadnym kablom prave novym.
    15.10.2013 12:15 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Tak jo, nějaký tam dám a snad se trefím a bude to fachčit:-)
    15.10.2013 13:22 Petr Šobáň | skóre: 79 | blog: soban | Olomouc
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    V kabelu bývá většinou zrada u konektoru, ty pružinky už nepruží a povrchová koroze taky dělá svoje....

    Prostě si poznač že ten kabel blbl a dej druhej když to bude OK tak byla zrada v kabelu a ten vadný vyhoď.
    15.10.2013 13:59 R
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Odkedy zlato koroduje?
    Josef Kufner avatar 15.10.2013 15:03 Josef Kufner | skóre: 67
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Ty máš pozlacené všechny SATA konektory? A určitě není v místě kontaktu kousek zlata sedřený? Nebo tam není chycený kousek prachu? Hm? ;-)
    Hello world ! Segmentation fault (core dumped)
    15.10.2013 18:31 Petr Šobáň | skóre: 79 | blog: soban | Olomouc
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Od té doby co nejsou kontakty ze zlata :-) né všechny konektory a pružinky jsou pozlacené!

    A i pozlacený kontakt může blbnout - nemusí mít dobrý přítlak - únava pružiny.

    A taky se láme kabel u průchodky z konektoru :-)
    16.10.2013 22:01 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Tak jsem vymenil kabel, nakonec i desku a je to porad stejne:-(
    Josef Kufner avatar 17.10.2013 00:46 Josef Kufner | skóre: 67
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Disk důkladně přemaž náhodnými daty (nebo kladivem) a reklamuj (nebo si z něj udělej nástěné hodiny).
    Hello world ! Segmentation fault (core dumped)
    17.10.2013 05:57 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Presne, je to k vzteku. Disk, ktery ma vydrzet vic nez klasicky, vydrzel jen par dni:-/ Jde do reklamace, doufam, ze mi to uznaji.
    17.10.2013 14:13 Petr Šobáň | skóre: 79 | blog: soban | Olomouc
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    No co s tím to nasere.....
    17.10.2013 14:37 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    aktualni vystup
    smartctl -d sat -a /dev/sda
    po tech vymenach by byl k dispozici?
    17.10.2013 14:48 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Jeste poznamka, spise nez desku je potreba vyzkouset jiny (vykonnejsi) napajeci zdroj. Viz treba diagnostika vysvetlena zde.
    17.10.2013 21:47 Tommy
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Tady:
    smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
    Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD20EFRX-68EUZN0
    Serial Number:    WD-WCC4M0120830
    Firmware Version: 80.00A80
    User Capacity:    2 000 398 934 016 bytes
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   9
    ATA Standard is:  Exact ATA specification draft version not indicated
    Local Time is:    Thu Oct 17 21:46:53 2013 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x00)	Offline data collection activity
    					was never started.
    					Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0)	The previous self-test routine completed
    					without error or no self-test has ever 
    					been run.
    Total time to complete Offline 
    data collection: 		 (27720) seconds.
    Offline data collection
    capabilities: 			 (0x7b) SMART execute Offline immediate.
    					Auto Offline data collection on/off support.
    					Suspend Offline collection upon new
    					command.
    					Offline surface scan supported.
    					Self-test supported.
    					Conveyance Self-test supported.
    					Selective Self-test supported.
    SMART capabilities:            (0x0003)	Saves SMART data before entering
    					power-saving mode.
    					Supports SMART auto save timer.
    Error logging capability:        (0x01)	Error logging supported.
    					General Purpose Logging supported.
    Short self-test routine 
    recommended polling time: 	 (   2) minutes.
    Extended self-test routine
    recommended polling time: 	 ( 255) minutes.
    Conveyance self-test routine
    recommended polling time: 	 (   5) minutes.
    SCT capabilities: 	       (0x703d)	SCT Status supported.
    					SCT Error Recovery Control supported.
    					SCT Feature Control supported.
    					SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
      3 Spin_Up_Time            0x0027   174   174   021    Pre-fail  Always       -       4266
      4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       10
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       168
     10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       10
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       6
    193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       3
    194 Temperature_Celsius     0x0022   116   103   000    Old_age   Always       -       31
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
    200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Extended offline    Completed without error       00%       118         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute dela
    17.10.2013 22:03 Milan Roubal | skóre: 25
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Ty hodnoty ukazuji na zdravy disk (ale stale je to pouze smart, chyba muze byt i v disku). Hodnota UDMA_CRC_Error_Count se nezvetsila, coz je dobre znameni. Ted bych se zameril spise na zdroj.

    Pro porovnani vypis hodnot z meho WD RED disku.
    > smartctl -d sat -a /dev/sda
    smartctl 5.42 2011-10-20 r3458 [armv5tel-linux-2.6.32.12] (local build)
    Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
    
    === START OF INFORMATION SECTION ===
    Device Model:     WDC WD30EFRX-68AX9N0
    Serial Number:    WD-XXXXXXXXXXX
    LU WWN Device Id: 5 0014ee 058c81985
    Firmware Version: 80.00A80
    User Capacity:    3,000,592,982,016 bytes [3.00 TB]
    Sector Sizes:     512 bytes logical, 4096 bytes physical
    Device is:        Not in smartctl database [for details use: -P showall]
    ATA Version is:   8
    ATA Standard is:  ACS-2 (revision not indicated)
    Local Time is:    Thu Oct 17 21:53:53 2013 CEST
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    
    General SMART Values:
    Offline data collection status:  (0x00) Offline data collection activity
                                            was never started.
                                            Auto Offline Data Collection: Disabled.
    Self-test execution status:      (   0) The previous self-test routine completed
                                            without error or no self-test has ever
                                            been run.
    Total time to complete Offline
    data collection:                (40980) seconds.
    Offline data collection
    capabilities:                    (0x7b) SMART execute Offline immediate.
                                            Auto Offline data collection on/off support.
                                            Suspend Offline collection upon new
                                            command.
                                            Offline surface scan supported.
                                            Self-test supported.
                                            Conveyance Self-test supported.
                                            Selective Self-test supported.
    SMART capabilities:            (0x0003) Saves SMART data before entering
                                            power-saving mode.
                                            Supports SMART auto save timer.
    Error logging capability:        (0x01) Error logging supported.
                                            General Purpose Logging supported.
    Short self-test routine
    recommended polling time:        (   2) minutes.
    Extended self-test routine
    recommended polling time:        ( 255) minutes.
    Conveyance self-test routine
    recommended polling time:        (   5) minutes.
    SCT capabilities:              (0x70bd) SCT Status supported.
                                            SCT Error Recovery Control supported.
                                            SCT Feature Control supported.
                                            SCT Data Table supported.
    
    SMART Attributes Data Structure revision number: 16
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
      3 Spin_Up_Time            0x0027   179   175   021    Pre-fail  Always       -       6041
      4 Start_Stop_Count        0x0032   098   098   000    Old_age   Always       -       2295
      5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
      7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
      9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       5202
     10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
     11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
     12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       1214
    192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       19
    193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       2275
    194 Temperature_Celsius     0x0022   108   103   000    Old_age   Always       -       42
    196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
    197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
    198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
    199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
    
    SMART Error Log Version: 1
    No Errors Logged
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%      5197         -
    # 2  Short offline       Completed without error       00%      5187         -
    # 3  Short offline       Completed without error       00%      5180         -
    # 4  Extended offline    Completed without error       00%      5173         -
    # 5  Short offline       Completed without error       00%      5151         -
    # 6  Short offline       Completed without error       00%      5137         -
    # 7  Short offline       Completed without error       00%      5127         -
    # 8  Short offline       Completed without error       00%      5118         -
    # 9  Short offline       Completed without error       00%      5112         -
    #10  Short offline       Completed without error       00%      5107         -
    #11  Extended offline    Completed without error       00%      5103         -
    #12  Short offline       Completed without error       00%      5088         -
    #13  Short offline       Completed without error       00%      5082         -
    #14  Short offline       Completed without error       00%      5072         -
    #15  Short offline       Completed without error       00%      5044         -
    #16  Short offline       Completed without error       00%      5022         -
    #17  Short offline       Completed without error       00%      4995         -
    #18  Extended offline    Completed without error       00%      4977         -
    #19  Short offline       Completed without error       00%      4947         -
    #20  Short offline       Completed without error       00%      4928         -
    #21  Short offline       Completed without error       00%      4921         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    
    17.10.2013 21:58 2013
    Rozbalit Rozbalit vše Re: Problem s 3 dny starym diskem:-(
    Na jadre 2.6.32 ti to nebude davat ziadne chyby. Podobna skusenost.

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.