Dotaz: nefunkční wifi

[Sandik]

Dobrý den,

na svém ntb HP Compaq nc6400 jsem měl nainstalovaný openSUSE 12.2 ale přestala mi fungovat wifi. Tak jsem to detailně neřešil a rozhodl se urychlit přechod na vyšší verzi, jenže wifi nefunguje stále. Používám ovladač wl, potřebné balíčky mám nainstalovány všechny a verze balíčku broadcom-wl-kmp-xxx souhlasí s verzí jádra. Evidentně se ale nedaří natáhnout moduly jádra. Když zadám ručně modprobe wl, zůstane viset, třeba i několik hodin. Bez chybové hlášky nebo jakéhokoli jiné reakce. V logu nic podezřelého. Nesetkal se prosím někdo s něčím podobným? Prosím o každé nakopnutí. MS

---

---

Odpovědi

[mhepp]

A co Ti vypíše dmesg?

[Sandik]

Obrovskou spoustu věcí:

sandik-ntb:/home/ms # dmesg
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.7.10-1.16-desktop (geeko@buildhost) (gcc version 4.7.2 20130108 [gcc-4_7-branch revision 195012] (SUSE Linux) ) #1 SMP PREEMPT Fri May 31 20:21:23 UTC 2013 (97c14ba)
[    0.000000] Disabled fast string operations
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007f7cffff] usable
[    0.000000] BIOS-e820: [mem 0x000000007f7d0000-0x000000007f7e55ff] reserved
[    0.000000] BIOS-e820: [mem 0x000000007f7e5600-0x000000007f7f7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007f7f8000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed9afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feda0000-0x00000000fedbffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffbfffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Hewlett-Packard HP Compaq nc6400 (EH522AV)/30AD, BIOS 68YCU Ver. F.05 08/10/2006
[    0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x7f7d0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base F7F800000 mask FFF800000 uncachable
[    0.000000]   2 base 0FEDA0000 mask FFFFE0000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] PAT not supported by CPU.
[    0.000000] initial memory mapped: [mem 0x00000000-0x011fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x371fdfff]
[    0.000000]  [mem 0x00000000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x36ffffff] page 2M
[    0.000000]  [mem 0x37000000-0x371fdfff] page 4k
[    0.000000] kernel direct mapping tables up to 0x371fdfff @ [mem 0x011f5000-0x011fffff]
[    0.000000] RAMDISK: [mem 0x341e0000-0x360e7fff]
[    0.000000] ACPI: RSDP 000f7c10 00024 (v02 HP    )
[    0.000000] ACPI: XSDT 7f7e57b8 00054 (v01 HP     30AD     10080620 HP   00000001)
[    0.000000] ACPI: FACP 7f7e5684 000F4 (v04 HP     30AD     00000003 HP   00000001)
[    0.000000] ACPI: DSDT 7f7e58ec 0F651 (v01 HP       nc6400 00010000 MSFT 0100000E)
[    0.000000] ACPI: FACS 7f7f7e80 00040
[    0.000000] ACPI: APIC 7f7e5814 00068 (v01 HP     30AD     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 7f7e587c 0003C (v01 HP     30AD     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 7f7e58b8 00032 (v02 HP     30AD     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 7f7f4f3d 00059 (v01 HP       HPQNLP 00000001 MSFT 0100000E)
[    0.000000] ACPI: SSDT 7f7f4f96 00341 (v01 HP       HPQPAT 00000001 MSFT 0100000E)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000007f7cffff]
[    0.000000] Initmem setup node 0 [mem 0x00000000-0x7f7cffff]
[    0.000000]   NODE_DATA [mem 0x371fc000-0x371fdfff]
[    0.000000] 1157MB HIGHMEM available.
[    0.000000] 881MB LOWMEM available.
[    0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
[    0.000000] Low memory ends at vaddr f71fe000
[    0.000000] High memory starts at vaddr f71fe000
[    0.000000]   mapped low ram: 0 - 371fe000
[    0.000000]   low ram: 0 - 371fe000
[    0.000000] Node: 0, start_pfn: 10, end_pfn: 9f
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   10
[    0.000000] Node: 0, start_pfn: 100, end_pfn: 7f7d0
[    0.000000]   Setting physnode_map array to node 0 for pfns:
[    0.000000]   100 4100 8100 c100 10100 14100 18100 1c100 20100 24100 28100 2c100 30100 34100 38100 3c100 40100 44100 48100 4c100 50100 54100 58100 5c100 60100 64100 68100 6c100 70100 74100 78100 7c100
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00010000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x371fdfff]
[    0.000000]   HighMem  [mem 0x371fe000-0x7f7cffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00010000-0x0009efff]
[    0.000000]   node   0: [mem 0x00100000-0x7f7cffff]
[    0.000000] On node 0 totalpages: 522079
[    0.000000] free_area_init_node: node 0, pgdat f71fc000, node_mem_map f620b200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1732 pages used for memmap
[    0.000000]   Normal zone: 219962 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2316 pages used for memmap
[    0.000000]   HighMem zone: 294086 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] e820: [mem 0x7f800000-0xfebfffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 13 pages/cpu @f61e5000 s32320 r0 d20928 u53248
[    0.000000] pcpu-alloc: s32320 r0 d20928 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 517999
[    0.000000] Policy zone: HighMem
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.7.10-1.16-desktop root=UUID=9476c878-9de0-4704-852f-9f83d46db943 video=1280x800 resume=/dev/disk/by-id/ata-FUJITSU_MHV2060BH_PL_NWA0T6A2H6YH-part6 splash=silent quiet showopts
[    0.000000] bootsplash: silent mode.
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4177408 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Initializing HighMem for node 0 (000371fe:0007f7d0)
[    0.000000] Memory: 2024640k/2088768k available (5179k kernel code, 63676k reserved, 3763k data, 512k init, 1185608k highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xff5b4000 - 0xfffff000   (10540 kB)
[    0.000000]     pkmap   : 0xff200000 - 0xff400000   (2048 kB)
[    0.000000]     vmalloc : 0xf79fe000 - 0xff1fe000   ( 120 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xf71fe000   ( 881 MB)
[    0.000000]       .init : 0xc0abc000 - 0xc0b3c000   ( 512 kB)
[    0.000000]       .data : 0xc070ed16 - 0xc0abbbc0   (3763 kB)
[    0.000000]       .text : 0xc0200000 - 0xc070ed16   (5179 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] NR_IRQS:8448 nr_irqs:512 16
[    0.000000] CPU 0 irqstacks, hard=f3806000 soft=f3808000
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 1662.570 MHz processor
[    0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.14 BogoMIPS (lpj=1662570)
[    0.002007] pid_max: default: 32768 minimum: 301
[    0.002050] Security Framework initialized
[    0.002069] AppArmor: AppArmor initialized
[    0.002137] Mount-cache hash table entries: 512
[    0.002445] Initializing cgroup subsys cpuacct
[    0.002448] Initializing cgroup subsys memory
[    0.002462] Initializing cgroup subsys devices
[    0.002465] Initializing cgroup subsys freezer
[    0.002468] Initializing cgroup subsys net_cls
[    0.002470] Initializing cgroup subsys blkio
[    0.002473] Initializing cgroup subsys perf_event
[    0.002477] Initializing cgroup subsys hugetlb
[    0.002517] Disabled fast string operations
[    0.002523] CPU: Physical Processor ID: 0
[    0.002525] CPU: Processor Core ID: 0
[    0.002529] mce: CPU supports 6 MCE banks
[    0.002539] CPU0: Thermal monitoring handled by SMI
[    0.002544] process: using mwait in idle threads
[    0.002554] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
[    0.002554] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
[    0.002554] tlb_flushall_shift: 6
[    0.002827] Freeing SMP alternatives: 20k freed
[    0.004017] ACPI: Core revision 20120913
[    0.014072] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.014535] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.024820] smpboot: CPU0: Genuine Intel(R) CPU           T2300  @ 1.66GHz (fam: 06, model: 0e, stepping: 08)
[    0.025000] Performance Events: Core events, core PMU driver.
[    0.025000] ... version:                1
[    0.025000] ... bit width:              40
[    0.025000] ... generic registers:      2
[    0.025000] ... value mask:             000000ffffffffff
[    0.025000] ... max period:             000000007fffffff
[    0.025000] ... fixed-purpose events:   0
[    0.025000] ... event mask:             0000000000000003
[    0.030934] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.033115] CPU 1 irqstacks, hard=f38d6000 soft=f38d8000
[    0.033118] smpboot: Booting Node   0, Processors  #1 OK
[    0.003000] Initializing CPU#1
[    0.003000] Disabled fast string operations
[    0.003000] CPU1: Thermal monitoring handled by SMI
[    0.045060] Brought up 2 CPUs
[    0.045069] smpboot: Total of 2 processors activated (6650.28 BogoMIPS)
[    0.047065] devtmpfs: initialized
[    0.047359] PM: Registering ACPI NVS region [mem 0x7f7e5600-0x7f7f7fff] (76288 bytes)
[    0.047359] reboot: BIOS series board detected. Selecting HP Compaq Laptop-method for reboots.
[    0.047359] RTC time: 12:58:35, date: 12/11/13
[    0.047359] NET: Registered protocol family 16
[    0.048009] ACPI: bus type pci registered
[    0.048102] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.048107] PCI: not using MMCONFIG
[    0.049198] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    0.049317] PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
[    0.049319] PCI: Using configuration type 1 for base access
[    0.049511] mtrr: your CPUs had inconsistent variable MTRR settings
[    0.049513] mtrr: probably your BIOS does not setup all CPUs.
[    0.049515] mtrr: corrected configuration.
[    0.051031] bio: create slab <bio-0> at 0
[    0.051061] ACPI: Added _OSI(Module Device)
[    0.051065] ACPI: Added _OSI(Processor Device)
[    0.051068] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.051072] ACPI: Added _OSI(Processor Aggregator Device)
[    0.054844] ACPI: EC: Look up EC in DSDT
[    0.136122] ACPI: Interpreter enabled
[    0.136138] ACPI: (supports S0 S3 S4 S5)
[    0.136166] ACPI: Using IOAPIC for interrupt routing
[    0.136203] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.138009] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
[    0.138012] PCI: Using MMCONFIG for extended config space
[    0.140390] ACPI: Power Resource [C1E6] (on)
[    0.141206] ACPI: Power Resource [C1ED] (on)
[    0.142302] ACPI: Power Resource [C213] (on)
[    0.147162] ACPI: Power Resource [C21B] (on)
[    0.155066] ACPI: Power Resource [C31A] (off)
[    0.155180] ACPI: Power Resource [C31B] (off)
[    0.155291] ACPI: Power Resource [C31C] (off)
[    0.155401] ACPI: Power Resource [C31D] (off)
[    0.156581] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[    0.157039] ACPI: No dock devices found.
[    0.157048] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.163372] ACPI: PCI Root Bridge [C002] (domain 0000 [bus 00-ff])
[    0.175989] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.175993] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff] (ignored)
[    0.175997] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.176004] pci_root PNP0A08:00: host bridge window [mem 0x7f800000-0xfedfffff] (ignored)
[    0.176008] pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
[    0.176011] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[    0.176015] PCI: root bus 00: using default resources
[    0.176020] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.176073] PCI host bridge to bus 0000:00
[    0.176079] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.176083] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.176087] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.176102] pci 0000:00:00.0: [8086:27a0] type 00 class 0x060000
[    0.176161] pci 0000:00:02.0: [8086:27a2] type 00 class 0x030000
[    0.176176] pci 0000:00:02.0: reg 10: [mem 0xf4600000-0xf467ffff]
[    0.176184] pci 0000:00:02.0: reg 14: [io  0x4000-0x4007]
[    0.176193] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff pref]
[    0.176201] pci 0000:00:02.0: reg 1c: [mem 0xf4680000-0xf46bffff]
[    0.176252] pci 0000:00:02.1: [8086:27a6] type 00 class 0x038000
[    0.176264] pci 0000:00:02.1: reg 10: [mem 0xf4700000-0xf477ffff]
[    0.176380] pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
[    0.176404] pci 0000:00:1b.0: reg 10: [mem 0xf4780000-0xf4783fff 64bit]
[    0.176513] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.176550] pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
[    0.176665] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.176703] pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
[    0.176817] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.176858] pci 0000:00:1c.3: [8086:27d6] type 01 class 0x060400
[    0.176972] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.177019] pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
[    0.177077] pci 0000:00:1d.0: reg 20: [io  0x4020-0x403f]
[    0.177125] pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
[    0.177184] pci 0000:00:1d.1: reg 20: [io  0x4040-0x405f]
[    0.177230] pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
[    0.177288] pci 0000:00:1d.2: reg 20: [io  0x4060-0x407f]
[    0.177335] pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
[    0.177394] pci 0000:00:1d.3: reg 20: [io  0x4080-0x409f]
[    0.177452] pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
[    0.177478] pci 0000:00:1d.7: reg 10: [mem 0xf4784000-0xf47843ff]
[    0.177589] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.177619] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.177721] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
[    0.177840] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[    0.177851] pci 0000:00:1f.0: quirk: [io  0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[    0.177859] pci 0000:00:1f.0: quirk: [io  0x1100-0x113f] claimed by ICH6 GPIO
[    0.177865] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
[    0.177874] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0238 (mask 0007)
[    0.177943] pci 0000:00:1f.2: [8086:27c4] type 00 class 0x010180
[    0.177966] pci 0000:00:1f.2: reg 10: [io  0x0000-0x0007]
[    0.177980] pci 0000:00:1f.2: reg 14: [io  0x0000-0x0003]
[    0.177993] pci 0000:00:1f.2: reg 18: [io  0x0000-0x0007]
[    0.178012] pci 0000:00:1f.2: reg 1c: [io  0x0000-0x0003]
[    0.178025] pci 0000:00:1f.2: reg 20: [io  0x40a0-0x40af]
[    0.178085] pci 0000:00:1f.2: PME# supported from D3hot
[    0.178299] pci 0000:08:00.0: [14e4:16fd] type 00 class 0x020000
[    0.178392] pci 0000:08:00.0: reg 10: [mem 0xf4100000-0xf410ffff 64bit]
[    0.178894] pci 0000:08:00.0: PME# supported from D3hot D3cold
[    0.178986] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.179020] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.179030] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.179180] pci 0000:10:00.0: [14e4:4311] type 00 class 0x028000
[    0.179248] pci 0000:10:00.0: reg 10: [mem 0xf4000000-0xf4003fff]
[    0.179739] pci 0000:10:00.0: supports D1 D2
[    0.179825] pci 0000:10:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.179852] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.179861] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.179933] pci 0000:00:1c.3: PCI bridge to [bus 20]
[    0.179940] pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
[    0.179946] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.180020] pci 0000:02:06.0: [104c:8039] type 02 class 0x060700
[    0.180050] pci 0000:02:06.0: reg 10: [mem 0xf4200000-0xf4200fff]
[    0.180099] pci 0000:02:06.0: supports D1 D2
[    0.180103] pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.180139] pci 0000:02:06.2: [104c:803b] type 00 class 0x018000
[    0.180168] pci 0000:02:06.2: reg 10: [mem 0xf4201000-0xf4201fff]
[    0.180297] pci 0000:02:06.2: supports D1 D2
[    0.180300] pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot
[    0.180332] pci 0000:02:06.3: [104c:803c] type 00 class 0x080500
[    0.180361] pci 0000:02:06.3: reg 10: [mem 0xf4202000-0xf42020ff]
[    0.180489] pci 0000:02:06.3: supports D1 D2
[    0.180492] pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot
[    0.180525] pci 0000:02:06.4: [104c:803d] type 00 class 0x078000
[    0.180554] pci 0000:02:06.4: reg 10: [mem 0xf4203000-0xf4203fff]
[    0.180572] pci 0000:02:06.4: reg 14: [mem 0xf4204000-0xf4204fff]
[    0.180686] pci 0000:02:06.4: supports D1 D2
[    0.180690] pci 0000:02:06.4: PME# supported from D0 D1 D2 D3hot
[    0.180762] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[    0.180772] pci 0000:00:1e.0:   bridge window [mem 0xf4200000-0xf45fffff]
[    0.180782] pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
[    0.180786] pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[    0.180841] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.180849] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[    0.180854] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[    0.180861] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[    0.180895] ACPI: PCI Interrupt Routing Table [\_SB_.C002._PRT]
[    0.181170] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C093._PRT]
[    0.181342] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C0F9._PRT]
[    0.181445] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C109._PRT]
[    0.181547] ACPI: PCI Interrupt Routing Table [\_SB_.C002.C10F._PRT]
[    0.181710]  pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[    0.181714]  pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[    0.205049] ACPI: PCI Interrupt Link [C105] (IRQs *10 11)
[    0.205211] ACPI: PCI Interrupt Link [C106] (IRQs *10 11)
[    0.205370] ACPI: PCI Interrupt Link [C107] (IRQs 10 *11)
[    0.205528] ACPI: PCI Interrupt Link [C108] (IRQs 10 11) *5
[    0.205688] ACPI: PCI Interrupt Link [C11B] (IRQs *10 11)
[    0.205833] ACPI: PCI Interrupt Link [C11C] (IRQs 10 11) *0, disabled.
[    0.205993] ACPI: PCI Interrupt Link [C11D] (IRQs 10 *11)
[    0.206066] ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20120913/pci_link-184)
[    0.206183] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.206183] vgaarb: loaded
[    0.206183] vgaarb: bridge control possible 0000:00:02.0
[    0.206190] SCSI subsystem initialized
[    0.206194] ACPI: bus type scsi registered
[    0.206208] libata version 3.00 loaded.
[    0.206208] ACPI: bus type usb registered
[    0.206208] usbcore: registered new interface driver usbfs
[    0.206208] usbcore: registered new interface driver hub
[    0.206208] usbcore: registered new device driver usb
[    0.206208] PCI: Using ACPI for IRQ routing
[    0.207625] PCI: pci_cache_line_size set to 64 bytes
[    0.207722] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.207726] e820: reserve RAM buffer [mem 0x7f7d0000-0x7fffffff]
[    0.207882] NetLabel: Initializing
[    0.207884] NetLabel:  domain hash size = 128
[    0.207886] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.207903] NetLabel:  unlabeled traffic allowed by default
[    0.208133] hpet clockevent registered
[    0.208139] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.208146] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.208153] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.214013] Switching to clocksource hpet
[    0.218385] AppArmor: AppArmor Filesystem Enabled
[    0.218423] pnp: PnP ACPI init
[    0.218445] ACPI: bus type pnp registered
[    0.218617] pnp 00:00: [mem 0x00000000-0x0009ffff]
[    0.218622] pnp 00:00: [mem 0x000e0000-0x000fffff]
[    0.218626] pnp 00:00: [mem 0x00100000-0x7f7fffff]
[    0.218688] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.218693] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[    0.218698] system 00:00: [mem 0x00100000-0x7f7fffff] could not be reserved
[    0.218704] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.225081] pnp 00:01: [bus 00-ff]
[    0.225086] pnp 00:01: [io  0x0cf8-0x0cff]
[    0.225090] pnp 00:01: [io  0x0000-0x0cf7 window]
[    0.225093] pnp 00:01: [io  0x0d00-0xffff window]
[    0.225097] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[    0.225101] pnp 00:01: [mem 0x7f800000-0xfedfffff window]
[    0.225105] pnp 00:01: [mem 0xfee01000-0xffffffff window]
[    0.225109] pnp 00:01: [mem 0x000d0000-0x000dffff window]
[    0.225187] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    0.226268] pnp 00:02: [io  0x03e8-0x03ef]
[    0.226273] pnp 00:02: [io  0x0100-0x010f]
[    0.226288] pnp 00:02: [irq 7]
[    0.226292] pnp 00:02: [dma 3]
[    0.226391] pnp 00:02: Plug and Play ACPI device, IDs SMCf010 PNP0511 (active)
[    0.227236] pnp 00:03: [io  0x0378-0x037f]
[    0.227240] pnp 00:03: [io  0x0778-0x077a]
[    0.227245] pnp 00:03: [irq 7]
[    0.227248] pnp 00:03: [dma 1]
[    0.227385] pnp 00:03: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.227520] pnp 00:04: [io  0x0560-0x056f]
[    0.227525] pnp 00:04: [io  0x0570-0x057f]
[    0.227528] pnp 00:04: [mem 0xfed40000-0xfed44fff]
[    0.227570] pnp 00:04: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.227589] pnp 00:05: [io  0x00f0-0x00ff]
[    0.227597] pnp 00:05: [irq 13]
[    0.227634] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.227657] pnp 00:06: [io  0x0000-0x000f]
[    0.227661] pnp 00:06: [io  0x0080-0x008f]
[    0.227664] pnp 00:06: [io  0x00c0-0x00df]
[    0.227667] pnp 00:06: [dma 4]
[    0.227706] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.227724] pnp 00:07: [io  0x0061]
[    0.227763] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.227781] pnp 00:08: [io  0x0070-0x0071]
[    0.227784] pnp 00:08: [io  0x0072-0x0073]
[    0.227792] pnp 00:08: [irq 8]
[    0.227829] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.227847] pnp 00:09: [io  0x0060]
[    0.227851] pnp 00:09: [io  0x0064]
[    0.227858] pnp 00:09: [irq 1]
[    0.227895] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.227919] pnp 00:0a: [irq 12]
[    0.227961] pnp 00:0a: Plug and Play ACPI device, IDs SYN0122 SYN0100 SYN0002 PNP0f13 (active)
[    0.228198] pnp 00:0b: [io  0x0010-0x001f]
[    0.228203] pnp 00:0b: [io  0x0024-0x003f]
[    0.228206] pnp 00:0b: [io  0x004e-0x004f]
[    0.228209] pnp 00:0b: [io  0x0050-0x0053]
[    0.228213] pnp 00:0b: [io  0x0063]
[    0.228216] pnp 00:0b: [io  0x0065]
[    0.228219] pnp 00:0b: [io  0x0067]
[    0.228223] pnp 00:0b: [io  0x0074-0x0077]
[    0.228226] pnp 00:0b: [io  0x0090-0x009f]
[    0.228229] pnp 00:0b: [io  0x00a4-0x00bd]
[    0.228233] pnp 00:0b: [io  0x0500-0x055f]
[    0.228236] pnp 00:0b: [io  0x0800-0x080f]
[    0.228240] pnp 00:0b: [mem 0xffb00000-0xffbfffff]
[    0.228243] pnp 00:0b: [mem 0xfff00000-0xffffffff]
[    0.228309] system 00:0b: [io  0x0500-0x055f] has been reserved
[    0.228314] system 00:0b: [io  0x0800-0x080f] has been reserved
[    0.228319] system 00:0b: [mem 0xffb00000-0xffbfffff] has been reserved
[    0.228324] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.228329] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229378] pnp 00:0c: [irq 23]
[    0.229429] pnp 00:0c: Plug and Play ACPI device, IDs HPQ0004 (active)
[    0.229469] pnp 00:0d: [io  0x04d0-0x04d1]
[    0.229473] pnp 00:0d: [io  0x1000-0x107f]
[    0.229477] pnp 00:0d: [io  0x1100-0x113f]
[    0.229480] pnp 00:0d: [io  0x1200-0x121f]
[    0.229484] pnp 00:0d: [mem 0xf8000000-0xfbffffff]
[    0.229489] pnp 00:0d: [mem 0xfec00000-0xfec000ff]
[    0.229493] pnp 00:0d: [mem 0xfed20000-0xfed3ffff]
[    0.229496] pnp 00:0d: [mem 0xfed45000-0xfed8ffff]
[    0.229500] pnp 00:0d: [mem 0xfed90000-0xfed9afff]
[    0.229580] system 00:0d: [io  0x04d0-0x04d1] has been reserved
[    0.229585] system 00:0d: [io  0x1000-0x107f] has been reserved
[    0.229589] system 00:0d: [io  0x1100-0x113f] has been reserved
[    0.229594] system 00:0d: [io  0x1200-0x121f] has been reserved
[    0.229599] system 00:0d: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.229603] system 00:0d: [mem 0xfec00000-0xfec000ff] could not be reserved
[    0.229608] system 00:0d: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.229613] system 00:0d: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.229617] system 00:0d: [mem 0xfed90000-0xfed9afff] has been reserved
[    0.229622] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.229988] pnp 00:0e: [mem 0xfeda0000-0xfedbffff]
[    0.229993] pnp 00:0e: [mem 0xfee00000-0xfee00fff]
[    0.230071] system 00:0e: [mem 0xfeda0000-0xfedbffff] has been reserved
[    0.230076] system 00:0e: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.230081] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.230109] pnp: PnP ACPI: found 15 devices
[    0.230111] ACPI: ACPI bus type pnp unregistered
[    0.268624] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 08] add_size 1000
[    0.268632] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[    0.268646] pci 0000:00:1c.1: bridge window [io  0x1000-0x0fff] to [bus 10] add_size 1000
[    0.268651] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 10] add_size 200000
[    0.268665] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000
[    0.268688] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.268692] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.268697] pci 0000:00:1e.0: bridge window [io  0x1000-0x0fff] to [bus 02-03] add_size 1000
[    0.268702] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.268707] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000
[    0.268719] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.268723] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.268727] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.268731] pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.268736] pci 0000:00:1c.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.268740] pci 0000:00:1c.1: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.268743] pci 0000:00:1e.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.268751] pci 0000:00:1e.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.268757] pci 0000:00:1c.0: BAR 15: assigned [mem 0x84000000-0x841fffff 64bit pref]
[    0.268762] pci 0000:00:1c.1: BAR 15: assigned [mem 0x84200000-0x843fffff 64bit pref]
[    0.268767] pci 0000:00:1c.3: BAR 15: assigned [mem 0x84400000-0x845fffff 64bit pref]
[    0.268772] pci 0000:00:1c.0: BAR 13: assigned [io  0x5000-0x5fff]
[    0.268778] pci 0000:00:1c.1: BAR 13: assigned [io  0x6000-0x6fff]
[    0.268784] pci 0000:00:1e.0: BAR 13: assigned [io  0x7000-0x7fff]
[    0.268789] pci 0000:00:1c.0: PCI bridge to [bus 08]
[    0.268795] pci 0000:00:1c.0:   bridge window [io  0x5000-0x5fff]
[    0.268803] pci 0000:00:1c.0:   bridge window [mem 0xf4100000-0xf41fffff]
[    0.268809] pci 0000:00:1c.0:   bridge window [mem 0x84000000-0x841fffff 64bit pref]
[    0.268819] pci 0000:00:1c.1: PCI bridge to [bus 10]
[    0.268824] pci 0000:00:1c.1:   bridge window [io  0x6000-0x6fff]
[    0.268831] pci 0000:00:1c.1:   bridge window [mem 0xf4000000-0xf40fffff]
[    0.268838] pci 0000:00:1c.1:   bridge window [mem 0x84200000-0x843fffff 64bit pref]
[    0.268847] pci 0000:00:1c.3: PCI bridge to [bus 20]
[    0.268852] pci 0000:00:1c.3:   bridge window [io  0x2000-0x3fff]
[    0.268860] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf3ffffff]
[    0.268866] pci 0000:00:1c.3:   bridge window [mem 0x84400000-0x845fffff 64bit pref]
[    0.268879] pci 0000:02:06.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[    0.268883] pci 0000:02:06.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[    0.268887] pci 0000:02:06.0: res[13]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.268891] pci 0000:02:06.0: res[14]=[io  0x0100-0x00ff] get_res_add_size add_size 100
[    0.268896] pci 0000:02:06.0: BAR 15: assigned [mem 0x80000000-0x83ffffff pref]
[    0.268901] pci 0000:02:06.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[    0.268905] pci 0000:02:06.0: BAR 13: assigned [io  0x7000-0x70ff]
[    0.268909] pci 0000:02:06.0: BAR 14: assigned [io  0x7400-0x74ff]
[    0.268914] pci 0000:02:06.0: CardBus bridge to [bus 03-06]
[    0.268918] pci 0000:02:06.0:   bridge window [io  0x7000-0x70ff]
[    0.268925] pci 0000:02:06.0:   bridge window [io  0x7400-0x74ff]
[    0.268932] pci 0000:02:06.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.268940] pci 0000:02:06.0:   bridge window [mem 0x88000000-0x8bffffff]
[    0.268947] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[    0.268952] pci 0000:00:1e.0:   bridge window [io  0x7000-0x7fff]
[    0.268960] pci 0000:00:1e.0:   bridge window [mem 0xf4200000-0xf45fffff]
[    0.268966] pci 0000:00:1e.0:   bridge window [mem 0x80000000-0x83ffffff pref]
[    0.269026] pci 0000:00:1e.0: setting latency timer to 64
[    0.269046] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.269050] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.269054] pci_bus 0000:08: resource 0 [io  0x5000-0x5fff]
[    0.269057] pci_bus 0000:08: resource 1 [mem 0xf4100000-0xf41fffff]
[    0.269061] pci_bus 0000:08: resource 2 [mem 0x84000000-0x841fffff 64bit pref]
[    0.269065] pci_bus 0000:10: resource 0 [io  0x6000-0x6fff]
[    0.269069] pci_bus 0000:10: resource 1 [mem 0xf4000000-0xf40fffff]
[    0.269072] pci_bus 0000:10: resource 2 [mem 0x84200000-0x843fffff 64bit pref]
[    0.269076] pci_bus 0000:20: resource 0 [io  0x2000-0x3fff]
[    0.269080] pci_bus 0000:20: resource 1 [mem 0xf0000000-0xf3ffffff]
[    0.269084] pci_bus 0000:20: resource 2 [mem 0x84400000-0x845fffff 64bit pref]
[    0.269088] pci_bus 0000:02: resource 0 [io  0x7000-0x7fff]
[    0.269091] pci_bus 0000:02: resource 1 [mem 0xf4200000-0xf45fffff]
[    0.269095] pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.269098] pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
[    0.269102] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[    0.269106] pci_bus 0000:03: resource 0 [io  0x7000-0x70ff]
[    0.269109] pci_bus 0000:03: resource 1 [io  0x7400-0x74ff]
[    0.269113] pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
[    0.269117] pci_bus 0000:03: resource 3 [mem 0x88000000-0x8bffffff]
[    0.269188] NET: Registered protocol family 2
[    0.269444] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.270209] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.270580] TCP: Hash tables configured (established 131072 bind 65536)
[    0.270622] TCP: reno registered
[    0.270629] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.270642] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.270758] NET: Registered protocol family 1
[    0.270786] pci 0000:00:02.0: Boot video device
[    0.270992] PCI: CLS 64 bytes, default 64
[    0.271092] Unpacking initramfs...
[    0.936781] Freeing initrd memory: 31776k freed
[    0.957462] audit: initializing netlink socket (disabled)
[    0.957485] type=2000 audit(1386766714.956:1): initialized
[    0.982598] bounce pool size: 64 pages
[    0.982624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.983131] VFS: Disk quotas dquot_6.5.2
[    0.983169] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.983432] msgmni has been set to 1700
[    0.983790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.983836] io scheduler noop registered
[    0.983840] io scheduler deadline registered
[    0.983859] io scheduler cfq registered (default)
[    0.984068] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.984219] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.984366] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[    0.984591] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    0.984594] vesafb: scrolling: redraw
[    0.984598] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.984888] vesafb: framebuffer at 0xe0000000, mapped to 0xf7a80000, using 3072k, total 3072k
[    1.014054] Console: switching to colour frame buffer device 128x48
[    1.042915] fb0: VESA VGA frame buffer device
[    1.042949] intel_idle: does not run on family 6 model 14
[    1.043033] GHES: HEST is not enabled!
[    1.043106] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
[    1.064254] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[    1.064866] Non-volatile memory driver v1.3
[    1.064869] Linux agpgart interface v0.103
[    1.065019] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[    1.065083] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[    1.065681] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[    1.065861] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[    1.066148] libphy: Fixed MDIO Bus: probed
[    1.066152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.066206] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    1.066211] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    1.066221] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    1.066240] ehci_hcd 0000:00:1d.7: debug port 1
[    1.070157] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    1.070191] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf4784000
[    1.076023] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.076059] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.076063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.076067] usb usb1: Product: EHCI Host Controller
[    1.076070] usb usb1: Manufacturer: Linux 3.7.10-1.16-desktop ehci_hcd
[    1.076074] usb usb1: SerialNumber: 0000:00:1d.7
[    1.076289] hub 1-0:1.0: USB hub found
[    1.076297] hub 1-0:1.0: 8 ports detected
[    1.077890] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.077918] uhci_hcd: USB Universal Host Controller Interface driver
[    1.077949] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.077954] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.077962] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.077995] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00004020
[    1.078059] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.078063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.078066] usb usb2: Product: UHCI Host Controller
[    1.078070] usb usb2: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
[    1.078073] usb usb2: SerialNumber: 0000:00:1d.0
[    1.078252] hub 2-0:1.0: USB hub found
[    1.078259] hub 2-0:1.0: 2 ports detected
[    1.078476] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    1.078481] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.078491] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    1.078537] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00004040
[    1.078585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.078589] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.078593] usb usb3: Product: UHCI Host Controller
[    1.078596] usb usb3: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
[    1.078599] usb usb3: SerialNumber: 0000:00:1d.1
[    1.078784] hub 3-0:1.0: USB hub found
[    1.078790] hub 3-0:1.0: 2 ports detected
[    1.079028] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    1.079033] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.079041] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    1.079089] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004060
[    1.079137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.079141] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.079144] usb usb4: Product: UHCI Host Controller
[    1.079148] usb usb4: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
[    1.079151] usb usb4: SerialNumber: 0000:00:1d.2
[    1.079330] hub 4-0:1.0: USB hub found
[    1.079338] hub 4-0:1.0: 2 ports detected
[    1.079568] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    1.079573] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    1.079581] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    1.079626] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00004080
[    1.079675] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    1.079678] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.079682] usb usb5: Product: UHCI Host Controller
[    1.079685] usb usb5: Manufacturer: Linux 3.7.10-1.16-desktop uhci_hcd
[    1.079689] usb usb5: SerialNumber: 0000:00:1d.3
[    1.079862] hub 5-0:1.0: USB hub found
[    1.079869] hub 5-0:1.0: 2 ports detected
[    1.080183] i8042: PNP: PS/2 Controller [PNP0303:C210,PNP0f13:C211] at 0x60,0x64 irq 1,12
[    1.081884] i8042: Detected active multiplexing controller, rev 1.1
[    1.082624] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.082666] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.082703] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.082737] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.082774] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.082925] mousedev: PS/2 mouse device common for all mice
[    1.083128] rtc_cmos 00:08: RTC can wake from S4
[    1.083323] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    1.083360] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.083374] cpuidle: using governor ladder
[    1.083376] cpuidle: using governor menu
[    1.083381] ledtrig-cpu: registered to indicate activity on CPUs
[    1.083703] usbcore: registered new interface driver usbhid
[    1.083705] usbhid: USB HID core driver
[    1.083927] TCP: cubic registered
[    1.083974] NET: Registered protocol family 10
[    1.084256] lib80211: common routines for IEEE802.11 drivers
[    1.084260] lib80211_crypt: registered algorithm 'NULL'
[    1.084275] Key type dns_resolver registered
[    1.084523] Using IPI No-Shortcut mode
[    1.084680] PM: Checking hibernation image partition /dev/disk/by-id/ata-FUJITSU_MHV2060BH_PL_NWA0T6A2H6YH-part6
[    1.105027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.507661] psmouse serio4: synaptics: Touchpad model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04793/0x300000/0x0, board id: 71, fw id: 35334
[    1.507671] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[    1.547170] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input1
[    1.550632] PM: Hibernation image not present or could not be loaded.
[    1.550652] registered taskstats version 1
[    1.551412]   Magic number: 9:577:986
[    1.551533] rtc_cmos 00:08: setting system clock to 2013-12-11 12:58:36 UTC (1386766716)
[    1.551735] Freeing unused kernel memory: 512k freed
[    1.552023] Write protecting the kernel text: 5180k
[    1.552091] Write protecting the kernel read-only data: 3396k
[    1.552093] NX-protecting the kernel data: 5060k
[    1.609392] ata_piix 0000:00:1f.2: version 2.13
[    1.609430] ata_piix 0000:00:1f.2: MAP [
[    1.609432]  P0 P2 IDE IDE ]
[    1.609488] ata_piix 0000:00:1f.2: setting latency timer to 64
[    1.609889] scsi0 : ata_piix
[    1.610425] scsi1 : ata_piix
[    1.610744] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x40a0 irq 14
[    1.610748] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40a8 irq 15
[    1.738023] usb 2-1: new full-speed USB device number 2 using uhci_hcd
[    1.764286] ata1.00: ATA-7: FUJITSU MHV2060BH PL, 892C, max UDMA/100
[    1.764291] ata1.00: 117231408 sectors, multi 16: LBA48
[    1.770258] ata1.00: configured for UDMA/100
[    1.770427] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2060B 892C PQ: 0 ANSI: 5
[    1.770655] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    1.770718] sd 0:0:0:0: [sda] Write Protect is off
[    1.770723] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.770751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.780446] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-U10N, HP06, max MWDMA2
[    1.786327] ata2.00: configured for MWDMA2
[    1.790395] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-U10N  HP06 PQ: 0 ANSI: 5
[    1.770786] ACPI: Invalid Power Resource to register!
[    1.790707] ACPI: Invalid Power Resource to register!<6>[    1.812406]  sda: sda1 sda2 < sda5 sda6 >
[    1.812940] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.821228] rdac: device handler registered
[    1.823478] emc: device handler registered
[    1.825626] hp_sw: device handler registered
[    1.827780] alua: device handler registered
[    1.834504] systemd-udevd[106]: starting version 195
[    1.868675] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.870979] ACPI: Sleep Button [C23D]
[    1.871118] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[    1.871268] ACPI: Lid Switch [C235]
[    1.871369] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.871432] ACPI: Power Button [PWRF]
[    1.872524] ACPI: Video Device [C080] (multi-head: yes  rom: no  post: no)
[    1.872598] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[    1.875754] [drm] Initialized drm 1.1.0 20060810
[    1.883625] ACPI: Fan [C31E] (off)
[    1.883728] ACPI: Fan [C31F] (off)
[    1.883818] ACPI: Fan [C320] (off)
[    1.883932] ACPI: Fan [C321] (off)
[    1.884738] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    1.884744] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[    1.884770] Console: switching to colour dummy device 80x25
[    1.885181] i915 0000:00:02.0: setting latency timer to 64
[    1.886790] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    1.886795] [drm] Driver supports precise vblank timestamp query.
[    1.886876] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.922755] thermal LNXTHERM:00: registered as thermal_zone0
[    1.922767] ACPI: Thermal Zone [TZ0] (51 C)
[    1.946331] thermal LNXTHERM:01: registered as thermal_zone1
[    1.946342] ACPI: Thermal Zone [TZ1] (54 C)
[    1.954060] usb 2-1: New USB device found, idVendor=03f0, idProduct=171d
[    1.954066] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.954070] usb 2-1: Product: HP Integrated Module
[    1.954073] usb 2-1: Manufacturer: Broadcom Corp
[    1.958026] tsc: Refined TSC clocksource calibration: 1662.499 MHz
[    1.958033] Switching to clocksource tsc
[    1.967446] thermal LNXTHERM:02: registered as thermal_zone2
[    1.967456] ACPI: Thermal Zone [TZ2] (49 C)
[    1.996411] thermal LNXTHERM:03: registered as thermal_zone3
[    1.996422] ACPI: Thermal Zone [TZ3] (33 C)
[    2.002774] thermal LNXTHERM:04: registered as thermal_zone4
[    2.002783] ACPI: Thermal Zone [TZ4] (69 C)
[    2.035421] [drm] initialized overlay support
[    2.163016] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[    2.314584] usb 3-1: New USB device found, idVendor=08ff, idProduct=2580
[    2.314589] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.314593] usb 3-1: Product: Fingerprint Sensor
[    2.512760] fbcon: inteldrmfb (fb0) is primary device
[    2.743363] Console: switching to colour frame buffer device 160x50
[    2.748513] fb0: inteldrmfb frame buffer device
[    2.748516] drm: registered panic notifier
[    2.748524] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    4.637045] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[    4.637056] PM: Basic memory bitmaps created
[    6.640156] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/serio5/input/input6
[    6.735338] PM: Basic memory bitmaps freed
[    6.735353] video LNXVIDEO:00: Restoring backlight state
[    6.831726] PM: Starting manual resume from disk
[    6.831734] PM: Hibernation image partition 8:6 present
[    6.831737] PM: Looking for hibernation image.
[    6.832026] PM: Image not found (code -22)
[    6.832029] PM: Hibernation image not present or could not be loaded.
[    6.994221] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl,user_xattr
[    7.343439] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[    8.671069] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; suse)
[    9.084369] systemd[1]: Inserted module 'autofs4'
[    9.119273] systemd[1]: Set hostname to <sandik-ntb.net>.
[   10.829990] systemd[1]: Starting Replay Read-Ahead Data...
[   10.841268] systemd[1]: Starting Collect Read-Ahead Data...
[   10.853236] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[   10.853356] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   10.853400] systemd[1]: Starting Remote File Systems.
[   10.853493] systemd[1]: Reached target Remote File Systems.
[   10.853522] systemd[1]: Starting Syslog Socket.
[   10.853664] systemd[1]: Listening on Syslog Socket.
[   10.853693] systemd[1]: Starting Delayed Shutdown Socket.
[   10.853794] systemd[1]: Listening on Delayed Shutdown Socket.
[   10.853812] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[   10.853912] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   10.853941] systemd[1]: Starting Encrypted Volumes.
[   10.854036] systemd[1]: Reached target Encrypted Volumes.
[   10.854082] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[   10.854312] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   10.854424] systemd[1]: Starting udev Kernel Socket.
[   10.854524] systemd[1]: Listening on udev Kernel Socket.
[   10.854607] systemd[1]: Starting udev Control Socket.
[   10.854709] systemd[1]: Listening on udev Control Socket.
[   10.854737] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dFUJITSU_MHV2060BH_PL_NWA0T6A2H6YH\x2dpart6.device...
[   10.854810] systemd[1]: Expecting device dev-disk-by\x2did-ata\x2dFUJITSU_MHV2060BH_PL_NWA0T6A2H6YH\x2dpart5.device...
[   10.854888] systemd[1]: Starting Journal Socket.
[   10.855038] systemd[1]: Listening on Journal Socket.
[   10.855076] systemd[1]: Starting LSB: Set default boot entry if called...
[   10.859043] systemd-readahead[245]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[   10.866131] systemd[1]: Mounting Huge Pages File System...
[   10.878112] systemd[1]: Mounting POSIX Message Queue File System...
[   10.891103] systemd[1]: Starting Create dynamic rule for /dev/root link...
[   10.904155] systemd[1]: Starting Journal Service...
[   10.915229] systemd[1]: Started Journal Service.
[   10.915549] systemd[1]: Starting LSB: iSCSI initiator daemon root-fs support...
[   12.911409] EXT4-fs (sda1): re-mounted. Opts: acl,user_xattr
[   13.064222] systemd-udevd[288]: starting version 195
[   13.753385] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   13.753392] EDD information not available.
[   14.810318] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   14.810511] ACPI: AC Adapter [C1A9] (on-line)
[   14.853670] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   14.853683] ACPI: Battery Slot [C1AB] (battery present)
[   14.853795] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[   14.853803] ACPI: Battery Slot [C1AA] (battery absent)
[   15.432868] microcode: CPU0 sig=0x6e8, pf=0x20, revision=0x39
[   15.578394] WARNING! power/level is deprecated; use power/control instead
[   15.709998] intel_rng: FWH not detected
[   15.779372] input: PC Speaker as /devices/platform/pcspkr/input/input7
[   15.830021] tifm_core: MMC/SD card detected in socket 0:1
[   15.856960] wmi: Mapper loaded
[   15.932851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.945056] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.945229] parport_pc 00:03: reported by Plug and Play ACPI
[   15.945313] parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[   16.001278] NET: Registered protocol family 23
[   16.108685] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   16.108742] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[   16.124709] tpm_tis 00:04: 1.2 TPM (device-id 0xB, rev-id 16)
[   16.148075] ppdev: user-space parallel port driver
[   16.195116] tpm_tis 00:04: Adjusting TPM timeout parameters.
[   16.299994] yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30ad]
[   16.300049] yenta_cardbus 0000:02:06.0: Enabling burst memory read transactions
[   16.300056] yenta_cardbus 0000:02:06.0: Using INTVAL to route CSC interrupts to PCI
[   16.300060] yenta_cardbus 0000:02:06.0: Routing CardBus interrupts to PCI
[   16.300067] yenta_cardbus 0000:02:06.0: TI: mfunc 0x01aa1b22, devctl 0x64
[   16.337036] input: HP WMI hotkeys as /devices/virtual/input/input8
[   16.345787] Bluetooth: Core ver 2.16
[   16.345931] NET: Registered protocol family 31
[   16.345935] Bluetooth: HCI device and connection manager initialized
[   16.345950] Bluetooth: HCI socket layer initialized
[   16.345954] Bluetooth: L2CAP socket layer initialized
[   16.345966] Bluetooth: SCO socket layer initialized
[   16.360394] ACPI Warning: 0x00001028-0x0000102f SystemIO conflicts with Region \_SB_.C002.C003.C0B2 1 (20120913/utaddress-251)
[   16.360406] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.360412] ACPI Warning: 0x00001130-0x0000113f SystemIO conflicts with Region \_SB_.C002.C003.C0C4 1 (20120913/utaddress-251)
[   16.360419] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.360421] ACPI Warning: 0x00001100-0x0000112f SystemIO conflicts with Region \_SB_.C002.C003.C0C4 1 (20120913/utaddress-251)
[   16.360427] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   16.360429] lpc_ich: Resource conflict(s) found affecting gpio_ich
[   16.382091] cfg80211: Calling CRDA to update world regulatory domain
[   16.469646] microcode: CPU1 sig=0x6e8, pf=0x20, revision=0x39
[   16.469764] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   16.488464] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   16.488473] cdrom: Uniform CD-ROM driver Revision: 3.20
[   16.489435] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   16.523709] yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0c78, PCI irq 18
[   16.523716] yenta_cardbus 0000:02:06.0: Socket status: 30000006
[   16.523721] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[   16.523733] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [io  0x7000-0x7fff]
[   16.523737] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0xf4200000-0xf45fffff]
[   16.523742] pcmcia_socket pcmcia_socket0: cs: memory probe 0xf4200000-0xf45fffff:
[   16.523751]  excluding 0xf4200000-0xf423ffff
[   16.523769] yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge window: [mem 0x80000000-0x83ffffff pref]
[   16.523774] pcmcia_socket pcmcia_socket0: cs: memory probe 0x80000000-0x83ffffff:
[   16.523789]  excluding 0x80000000-0x83ffffff
[   16.564042] hp_accel: hardware type NC64x0 found
[   16.587905] lis3lv02d: 12 bits sensor found
[   16.652501] usbcore: registered new interface driver btusb
[   16.666378] leds_ss4200: no LED devices found
[   16.694598] sdhci: Secure Digital Host Controller Interface driver
[   16.694604] sdhci: Copyright(c) Pierre Ossman
[   16.802130] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9
[   16.803424] Registered led device: hp::hddprotect
[   16.958811] sdhci-pci 0000:02:06.3: SDHCI controller found [104c:803c] (rev 0)
[   16.958914] Registered led device: mmc1::
[   16.980054] mmc1: SDHCI controller on PCI [0000:02:06.3] using PIO
[   17.008335] cfg80211: World regulatory domain updated:
[   17.008342] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   17.008345] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.008349] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.008352] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   17.008354] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.008357] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   17.054957] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[   17.054968]  excluding 0xc0000-0xc7fff 0xe0000-0xfffff
[   17.055311] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[   17.055334]  clean.
[   17.055388] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[   17.055403]  excluding 0x60000000-0x60ffffff
[   17.122057] tpm_tis 00:04: TPM is disabled/deactivated (0x7)
[   17.156554] found SMC SuperIO Chip (devid=0x7a rev=01 base=0x004e): LPC47N227
[   17.156583] smsc_superio_flat(): fir: 0x100, sir: 0x3e8, dma: 03, irq: 7, mode: 0x0e
[   17.156589] smsc_ircc_present: can't get sir_base of 0x3e8
[   17.195802] iTCO_vendor_support: vendor-support=0
[   17.445095] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[   17.445144] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[   17.445921] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   17.485328] tg3.c:v3.125 (September 26, 2012)
[   17.525370] tg3 0000:08:00.0 eth0: Tigon3 [partno(BCM95751M) rev 4201] (PCI Express) MAC address 00:16:d4:36:76:ff
[   17.525377] tg3 0000:08:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[   17.525382] tg3 0000:08:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[   17.525386] tg3 0000:08:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[   17.893611] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[   17.910498] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   18.043368] wl: module license 'unspecified' taints kernel.
[   18.043376] Disabling lock debugging due to kernel taint
[   18.128998] malloc in abgphy done
[   18.130953] wl driver 6.30.223.141 (r415941) failed with code 21
[   18.131004] ------------[ cut here ]------------
[   18.131004] kernel BUG at /usr/src/linux-3.7.10-1.16/include/net/cfg80211.h:2493!
[   18.131004] invalid opcode: 0000 [#1] PREEMPT SMP
[   18.131004] Modules linked in: wl(PO+) snd_hda_codec_si3054 snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mperf tg3 iTCO_wdt coretemp iTCO_vendor_support tpm_infineon sdhci_pci snd tifm_sd sdhci btusb hp_accel lis3lv02d pcmcia sr_mod cdrom mmc_core cfg80211 lpc_ich bluetooth hp_wmi yenta_socket pcmcia_rsrc soundcore input_polldev joydev serio_raw ppdev tpm_tis sg snd_page_alloc irda sparse_keymap mfd_core shpchp parport_pc parport pci_hotplug wmi pcmcia_core rfkill tifm_7xx1 tifm_core pcspkr crc_ccitt tpm tpm_bios microcode container battery ac autofs4 thermal fan i915 drm_kms_helper drm i2c_algo_bit video button processor thermal_sys scsi_dh_alua scsi_dh_hp_sw scsi_dh_emc scsi_dh_rdac scsi_dh ata_generic ata_piix
[   18.131004] Pid: 319, comm: systemd-udevd Tainted: P           O 3.7.10-1.16-desktop #1 Hewlett-Packard HP Compaq nc6400 (EH522AV)/30AD
[   18.131004] EIP: 0060:[<f8eeebda>] EFLAGS: 00010246 CPU: 0
[   18.131004] EIP is at wdev_priv.part.9+0x0/0x2 [wl]
[   18.131004] EAX: 00000000 EBX: f48358b4 ECX: f3205a00 EDX: f48358b4
[   18.131004] ESI: f39a0800 EDI: f3205a00 EBP: f483588c ESP: f33edd4c
[   18.131004]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[   18.131004] CR0: 8005003b CR2: b77abf20 CR3: 35cc9000 CR4: 000007f0
[   18.131004] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000
[   18.131004] DR6: ffff0ff0 DR7: 00000400
[   18.131004] Process systemd-udevd (pid: 319, ti=f33ec000 task=f3284ef0 task.ti=f33ec000)
[   18.131004] Stack:
[   18.131004]  f8eee0bd f48358b4 f39a0800 f3205a00 f483588c f8ee6c26 f4835880 f39a0800
[   18.131004]  f5f20800 00000000 f8ee78df c0b617c4 00000046 c023ac1b c0b8fea0 00000400
[   18.131004]  c0b4f5bc 00000082 0000037e 00000000 00000002 0000037d 00000000 00000046
[   18.131004] Call Trace:
[   18.131004]  [<f8eee0bd>] wl_cfg80211_detach+0xbd/0xd0 [wl]
[   18.131004]  [<f8ee6c26>] wl_free_if.isra.9+0x26/0xa0 [wl]
[   18.131004]  [<f8ee78df>] wl_free+0x2f/0x1f0 [wl]
[   18.131004]  [<f8eeeb60>] wl_pci_probe+0x4d2/0x4eb [wl]
[   18.131004]  [<c0498703>] local_pci_probe+0x33/0x70
[   18.131004]  [<c04988e7>] pci_device_probe+0xd7/0xe0
[   18.131004]  [<c0538c64>] driver_probe_device+0x74/0x360
[   18.131004]  [<c0538fc9>] __driver_attach+0x79/0x80
[   18.131004]  [<c0537278>] bus_for_each_dev+0x38/0x70
[   18.133890]  [<c0538786>] driver_attach+0x16/0x20
[   18.133890]  [<c053838f>] bus_add_driver+0x16f/0x270
[   18.133890]  [<c0539563>] driver_register+0x63/0x150
[   18.133890]  [<c020123a>] do_one_initcall+0x11a/0x170
[   18.133890]  [<c0297a82>] sys_init_module+0xa2/0x220
[   18.133890]  [<c0707e60>] syscall_call+0x7/0xb
[   18.133890]  [<b7677a2e>] 0xb7677a2d
[   18.133890] Code: ff ff 89 e8 e8 18 8c 81 c7 89 f0 e8 f1 8c ff ff 89 d8 e8 0a 71 5a c7 89 f8 31 d2 5b 5e 5f 5d e9 8d 9a 64 c7 5b 5e 5f 5d c3 0f 0b <0f> 0b 0f 0b 0f 0b 0f 0b 00 00 00 00 00 00 00 00 00 00 00 00 00
[   18.134460] EIP: [<f8eeebda>] wdev_priv.part.9+0x0/0x2 [wl] SS:ESP 0068:f33edd4c
[   18.155122] ---[ end trace beb89f3e2c3fa092 ]---
[   19.065754] Adding 1524732k swap on /dev/sda6.  Priority:-1 extents:1 across:1524732k
[   19.898021] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[   19.945666] systemd-journald[251]: Received SIGUSR1
[   22.891501] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   22.891503] Bluetooth: BNEP filters: protocol multicast
[   22.891514] Bluetooth: BNEP socket layer initialized
[   22.901877] systemd-logind[857]: Watching system buttons on /dev/input/event4 (Power Button)
[   22.902035] systemd-logind[857]: Watching system buttons on /dev/input/event5 (Video Bus)
[   22.902163] systemd-logind[857]: Watching system buttons on /dev/input/event3 (Lid Switch)
[   22.902286] systemd-logind[857]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   34.804240] Bluetooth: RFCOMM TTY layer initialized
[   34.804260] Bluetooth: RFCOMM socket layer initialized
[   34.804263] Bluetooth: RFCOMM ver 1.11
[   35.578828] NET: Registered protocol family 17
[   35.583329] tg3 0000:08:00.0: irq 44 for MSI/MSI-X
[   35.754330] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  113.555893] fuse init (API version 7.20)
[  328.035366] tg3 0000:08:00.0 eth0: Link is up at 100 Mbps, full duplex
[  328.035373] tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX
[  328.035392] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  458.649082] tg3 0000:08:00.0 eth0: Link is down
[  462.903115] tg3 0000:08:00.0 eth0: Link is up at 100 Mbps, full duplex
[  462.903122] tg3 0000:08:00.0 eth0: Flow control is on for TX and on for RX

[pepe_]

Samo na sebe práší bug ?

 

[   18.130953] wl driver 6.30.223.141 (r415941) failed with code 21
[   18.131004] ------------[ cut here ]------------
[   18.131004] kernel BUG at /usr/src/linux-3.7.10-1.16/include/net/cfg80211.h:2493!
[   18.131004] invalid opcode: 0000 [#1] PREEMPT SMP
[   18.131004] Modules linked in: wl(PO+) snd_hda_codec_si3054 snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm snd_seq snd_timer snd_seq_device mperf tg3 iTCO_wdt coretemp iTCO_vendor_support tpm_infineon sdhci_pci snd tifm_sd sdhci btusb hp_accel lis3lv02d pcmcia sr_mod cdrom mmc_core cfg80211 lpc_ich bluetooth hp_wmi yenta_socket pcmcia_rsrc soundcore input_polldev joydev serio_raw ppdev tpm_tis sg snd_page_alloc irda sparse_keymap mfd_core shpchp parport_pc parport pci_hotplug wmi pcmcia_core rfkill tifm_7xx1 tifm_core pcspkr crc_ccitt tpm tpm_bios microcode container battery ac autofs4 thermal fan i915 drm_kms_helper drm i2c_algo_bit video button processor thermal_sys scsi_dh_alua scsi_dh_hp_sw scsi_dh_emc scsi_dh_rdac scsi_dh ata_generic ata_piix
[   18.131004] Pid: 319, comm: systemd-udevd Tainted: P           O 3.7.10-1.16-desktop #1 Hewlett-Packard HP Compaq nc6400 (EH522AV)/30AD

[Sandik]

Toho jsem si taky všiml ale úplně netuším, jestli to souvisí s nefunčností wifi. Pokud ano, pomohl by asi downgrade na nižší verzi.

[Jendа]

cfg80211 je něco s wifinou. Ale co to je za bug, to netuším. Zkusil bych pohledat a klidně nareportovat.

[Sandik]

Skok na nižší verzi jádra nepomohl, což ale asi souvisí s tím, že už není k dispozici starší verze souboru broadcom-wl-kmp-xxx. Na Packmanu je vždy jen nejnovější verze. ;o\

[R]

A iny driver nejde? Napr. b43?

[Sandik]

Měl jsem za to, že b43 je wl, každopádně pokud postupuju podle tohoto návodu http://wireless.kernel.org/en/users/Drivers/b43#openSUSE zůstane viset taky...

[Sandik]

Odinstaloval jsem všechny balíčky, vymazal blacklist a znova nainstaloval a zkusil natáhnout moduly. Dopadlo to takhle: "modprobe wl Neoprávněný přístup do paměti (SIGSEGV)" Tak se ptám, funguje to někomu? Jestli to je vážně bug, tak by to přece mělo skapat všem ne?

[Sandik]

wl je pokud vím uzavřený bastl přímo od Broadcomu, těžko tedy soudit, co ten modul přesně dělá. Je totiž možné, že v nějaké kombinaci verze jádra+konfigurace jádra+natažené moduly to nemusí fungovat. Osobně bych wl úplně vyhodil a pokusil se použít b43, jak je většinou doporučováno.

[Sandik]

B43 už jsem taky zkoušel a bezvýsledně. Teď jsem to ale zkusil znova a ejhle, ono to vážně chodí. Předtím mě asi nenapadlo vyrušit natažené wl moduly. Díky moc.