Dotaz: Naučte mě pls. vypalovat

[jiri.one]

Mam takovy problem s vypalovanim, potreboval bych kopirovat CD za letu. Kdyz chci vypalit klasicke datove CD z disku, treba pres K3B, tak to neni zadny problem a vse se uspesne nasmazi. Ale take potrebuju kopirovat CD a to mi tak nejak nejde. Zkousel jsem CD kopirovat take primo v K3B , ale ten pro to pouziva CDRDAO a to mi hlasi ze na moji mechaniku nema ovladac (generic-mmc). Takze jsem to chtel zkusit pres CDRECORD. Zkusil jsem prikaz

cdrecord -dummy -v dev=0,0,0 speed=24 -isosize /dev/hdc

a ten mi vyhodi

cdrecord -dummy -v dev=0,1,0 speed=24 -isosize /dev/cdrom
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jrg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,1,0'
scsibus: 0 target: 1 lun: 0
Linux sg driver version: 3.1.24
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
Error trying to open /dev/scd0 exclusively ... retrying in 1 second.
bailing out..

Rekl bych ze mam vse dobre nastavene: takhle vypada vypis z cdrecord -scanbus

cdrecord -scanbus
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jrg Schilling
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.75-RH '@(#)scsi-linux-sg.c        1.75 02/10/21 Copyright 1997 J. Schilling').
scsibus0:
        0,0,0     0) 'TEAC    ' 'CD-W524E        ' '1.0E' Removable CD-ROM
        0,1,0     1) 'TEAC    ' 'CD-W552E        ' '1.09' Removable CD-ROM
        0,2,0     2) *
        0,3,0     3) *
        0,4,0     4) *
        0,5,0     5) *
        0,6,0     6) *
        0,7,0     7) *

takhle vypada muj soubor grub.conf:

default=0
timeout=10
splashimage=(hd0,0)/boot/grub/splash.xpm.gz
title Red Hat Linux (2.4.20-8)
	root (hd0,0)
	kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/ hdb=ide-scsi hdc=ide-scsi
	initrd /boot/initrd-2.4.20-8.img

prikaz lsmod hlasi taky vsechno potrebne:

sg                     36524   0  (autoclean)
sr_mod                 18136   2  (autoclean)
ide-scsi               12208   1
scsi_mod              107160   3  [sg sr_mod ide-scsi]
ide-cd                 35708   1
cdrom                  33728   0  [sr_mod ide-cd]

a muj soubor fstab vypada takhle:

LABEL=/                 /                       ext3    defaults        1 1
none                    /dev/pts                devpts  gid=5,mode=620  0 0
LABEL=/home             /home                   ext3    defaults        1 2
none                    /proc                   proc    defaults        0 0
none                    /dev/shm                tmpfs   defaults        0 0
/dev/hda6               swap                    swap    defaults        0 0
/dev/cdrom              /mnt/cdrom              udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/scd0	        /mnt/cdrom1             udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/scd1	        /mnt/cdrom2             udf,iso9660 noauto,owner,kudzu,ro 0 0
/dev/fd0                /mnt/floppy             auto    noauto,owner,kudzu 0 0

nevi nekdo nahodou jak bych mohl CDRDAO donutit moji palirnu pouzivat? Nebo proste rict mi jak mam kopirovat jakakoliv CD za letu? Dekuji za kazdy napad

PS: Pouzivam RedHat 9 a K3B v0.9 - K3B hned po spusteni hlasi cosi o tom ze nemohu vypalovat pres CDRDAO

Odpovědi

[Ondřej Čečák]

muzu ti poradit, jak naucit vypalovat pres k3b. Bud mu to nastav do parametru, nebo pridej svoji vypalovacku do konfiguraku cdrdao (u me, tedy Debian, /usr/share/cdrdao/drivers, napriklad jsem pridal "W|LITE-ON|LTR-48125W|generic-mmc-raw" bez uvozovek. Prijde mi to jako nejsnazsi reseni ...

[jiri.one]

Tak jednotuchy, ale tak ucinny a elegantni reseni, dekuju, uz mi to smazi :)) jeste bych se chtel zeptat, kdyz si tam pridam -raw, nemuze se mi neco stat s vypalovackou? u mojeho starsiho typu je nastaveno jen generic-mmc, tak abych neco nezvoral.

[johann]

ja som do skriptu pre copy vlozil : cdrdao copy --device 0,0,0 --source-device 0,1,0 --driver generic-mmc --source-driver generic-mmc --speed 10 ?-)) jednoduche, ze? ***MAN*** cdrdao