Dotaz: Zprovoznění ATI Radeon 9200

[David Hauzar]

Vsechny zdravim,

mam MDK 9.2 (XFree86 4.3), grafickou kartu ATI Radeon 9200 (Tripplex) a k ni pripojeny LCD monitor pres DVI.

V textovem rezimu jsem zmenil ovladac graf. karty (pomoci XFdrake) na Radeon (popripade Radeon (fbdev) nebo Radeon (fglrx) - vysledek byl vzdy stejny). Kdyz jsem pak v XFdrake vyskousel konfiguraci otestovat, nekdy se objevila chybova hlaska, nekdy zcernala obrazovka (nekdy pomohlo restartovat graf. rezim CTRL-ALT-BAKSPACE, nekdy ne), nekdy test probehl korektne...

Pri startu textoveho rezimu obrazovka nejprve blikne a pote zcerna (monitor se vypne). Kdyz restartuji graf. rezim (CTRL-ALT-BAKSPACE), naskoci jakasi obrazovka s cernymi a jantarovymi pruhy, pocitac pote musim restartovat (CTRL-ALT-BAKSPACE, CTRL-ALT-DEL apod. bez odezvy). Kdyz ale pred CTRL-ALT-BAKSPACE zmacknu CTRL-ALT-ENTER (uspani pocitace?), naskoci prihlasovaci obrazovka graf. rezimu.

Standardne se prihlasim. Nejdou ale poustet 3D programy (s graf. kartou nvidia Geforce 2 na stejne instalaci MDK to slo) - kdyz se o to pokusim spustit Tuxracera, objevi se toto:

tuxracer error: Couldn't initialize video: Couldn't find matching GLX visual

Zkousel jsem instalovat aktualni ovladace od ATI, problemy ale nezmizely...

Nevite nekdo, co s tim?

Diky David

Odpovědi

[David Jež]

Ahoj,
pises ze ti tam jela nejaka nVidia, to znamena ze mas zprzneny system jejima knihovnama. Ty musis prepsat spatky DRI jejich DRI verzi z distra. Konkretne smazat v Xkach v modulech soubor glx.so.* a jeho link glx.so a nechat tam jen glx.a dale bud najit zalohy ktere udelal nvidia instalacni skript nebo prepsat z rpmka, jsou to knihovny libGL* a libGLU*. V konfiguracnim souboru Xek nakonfigurujes zavadeni modulu glx, GLcore a dri. Dale, pokud mas ovladace z original xfree, pouzivas ovladac radeon, ale pomoci ChipID mu musis rict ze graficka karta je 8500 jinak nebude fungovat. Pokud mas ATI ovladace, je to ovldaca fglrx.
Dale je zapotrebi mit v jadre rozchozene dri, coz je pro radeon modul radeon.o pro ATI ovladace fglrx.o ktery se vytvori pri kompilaci tech ovladacu. Dale agpgart, coz v pripade ATI ovladacu maji v sobe, nicmene pokud mas na zakladni desce chipset KT (KM) 400,400A,600,600A nebo i865, i875 tak nebude fungovat a musis pouzit stejne jako pri pouzivani X ovladace radeon agpgart v jadra. Zde musis vedet co je na desce, pokud je to moc novy chipset ktery umi AGP3 (tedy 8x) tak i875 a AMD fungovat bude v 2.4.23 jadre, pokud mas VIA >KT400 tak viz. linux@linux.cz, klml a ostatni thready zde na abclinuxu.cz. Uz sem to tu resil hodnekrat.
Pokud to tedy staci takhle, jinak sem posli alespon co mas za desku a hlavne sem posli log z dmesg a log z Xek at vime presne co se mu nelibi.
-djz

[David Hauzar]

Diky moc, vyzkousim to ale az o vikendu. Zatim posilam info o zakl. desce a vypisy z logu. základní deska: ECS K7S5A log z Xek

XFree86 Version 4.3.0
Release Date: 9 May 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF] 
Build Date: 10 September 2003
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Dec  3 03:24:40 2003
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "layout1"
(**) |-->Screen "screen1" (0)
(**) |   |-->Monitor "monitor1"
(**) |   |-->Device "device1"
(**) |-->Input Device "Keyboard1"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "cz"
(**) XKB: layout: "cz"
(WW) Option "XkbOptions" requires an string value
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "Mouse1"
(**) FontPath set to "unix/:-1"
(==) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail"
Using vt 7
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1039,0735 card 0000,0000 rev 01 class 06,00,00 hdr 80
(II) PCI: 00:01:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:02:0: chip 1039,0008 card 0000,0000 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:02:2: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:3: chip 1039,7001 card 1019,0a14 rev 07 class 0c,03,10 hdr 00
(II) PCI: 00:02:5: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
(II) PCI: 00:0f:0: chip 1102,0002 card 1102,8064 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0f:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 1002,5961 card 1787,320e rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5941 card 1787,320f rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x0000b000 - 0x0000bfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xcfe00000 - 0xcfefffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xafc00000 - 0xcfcfffff (0x20100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:2:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5961) rev 1,\
 Mem @ 0xc0000000/27, 0xcfef0000/16, I/O @ 0xb800/8, BIOS @ 0xcfec0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5941) rev 1, Mem @ 0xb8000000/27, 0xcfee0000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd3ffffff to 0xcfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[1] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[2] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[3] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[4] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[5] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[6] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[7] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[10] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[11] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[1] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[2] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[3] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[4] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[5] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[6] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[7] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[10] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[11] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[6] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[8] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[9] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[10] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[11] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[12] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[16] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[17] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[18] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "v4l"
(II) Loading /usr/X11R6/lib/modules/drivers/linux/v4l_drv.o
(II) Module v4l: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.0.1
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
	compiled for 4.0.2, module version = 1.0.4496
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "radeon"
(II) Loading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) Module radeon: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 4.0.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "ati"
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 6.4.18
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) v4l driver for Video4Linux
(II) ATI: ATI driver (version 6.4.18) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
	ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
	ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
	ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
	ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
	ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
	ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
	ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
	ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
	ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
	ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
	ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
	ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
	ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
	ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
	ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
	ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
	ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
	ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
	ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
	ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
	ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
	ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
	ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
	ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
	ATI Radeon VE/7000 QY (AGP), ATI Radeon VE/7000 QZ (AGP),
	ATI Radeon Mobility M7 LW (AGP),
	ATI Mobility FireGL 7800 M7 LX (AGP),
	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
	ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
	ATI Radeon IGP330/340/350 (A4) 4137,
	ATI Radeon IGP330M/340M/350M (U2) 4337,
	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QI (AGP),
	ATI Radeon 8500 QJ (AGP), ATI Radeon 8500 QK (AGP),
	ATI Radeon 8500 QL (AGP), ATI Radeon 9100 QM (AGP),
	ATI Radeon 8500 QN (AGP), ATI Radeon 8500 QO (AGP),
	ATI Radeon 8500 Qh (AGP), ATI Radeon 8500 Qi (AGP),
	ATI Radeon 8500 Qj (AGP), ATI Radeon 8500 Qk (AGP),
	ATI Radeon 8500 Ql (AGP), ATI Radeon 8500 BB (AGP),
	ATI Radeon 7500 QW (AGP), ATI Radeon 7500 QX (AGP),
	ATI Radeon 9000 Id (AGP), ATI Radeon 9000 Ie (AGP),
	ATI Radeon 9000 If (AGP), ATI Radeon 9000 Ig (AGP),
	ATI Radeon Mobility M9 Ld (AGP), ATI Radeon Mobility M9 Le (AGP),
	ATI Radeon Mobility M9 Lf (AGP), ATI Radeon Mobility M9 Lg (AGP),
	ATI Radeon 9200 5960 (AGP), ATI Radeon 9200 5961 (AGP),
	ATI Radeon 9200 5962 (AGP), ATI Radeon 9200 5963 (AGP),
	ATI Radeon M9+ 5968 (AGP), ATI Radeon M9+ 5969 (AGP),
	ATI Radeon M9+ 596A (AGP), ATI Radeon M9+ 596B (AGP),
	ATI Radeon 9500 AD (AGP), ATI Radeon 9500 AE (AGP),
	ATI Radeon 9500 AF (AGP), ATI FireGL Z1/X1 AG (AGP),
	ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
	ATI Radeon 9700 NF (AGP), ATI FireGL X1 NG (AGP)
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(WW) RADEON: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset ATI Radeon 9200 5961 (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]

	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[6] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[8] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[9] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[10] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[11] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[12] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[14] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[15] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[16] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[17] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[18] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Reloading /usr/X11R6/lib/modules/drivers/radeon_drv.o
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[6] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[7] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[8] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[9] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[10] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[11] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[12] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[18] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[19] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[20] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[21] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
	[22] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[23] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon 9200 5961 (AGP)" (ChipID = 0x5961)
(--) RADEON(0): Linear framebuffer at 0xc0000000
(--) RADEON(0): MMIO registers at 0xcfef0000
(--) RADEON(0): BIOS at 0xcfec0000
(--) RADEON(0): VideoRAM: 131072 kByte (64-bit DDR SDRAM)
(II) RADEON(0): CloneDisplay option not set -- defaulting to auto-detect
(II) RADEON(0): Primary Display == Type 3
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.2.0
	ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=20000
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head (DDCType: 2) ---------
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C EDID Info:
(II) RADEON(0): Manufacturer: ENC  Model: 1689  Serial#: 0
(II) RADEON(0): Year: 2003  Week: 20
(II) RADEON(0): EDID Version: 1.2
(II) RADEON(0): Digital Display Input
(II) RADEON(0): Max H-Image Size [cm]: horiz.: 34  vert.: 27
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
(II) RADEON(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported VESA Video Modes:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported Future Video Modes:
(II) RADEON(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) RADEON(0): Supported additional Video Mode:
(II) RADEON(0): clock: 108.0 MHz   Image Size:  337 x 270 mm
(II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Serial No: 38819053
(II) RADEON(0): Ranges: V min: 59  V max: 61 Hz, H min: 31  H max: 64 kHz, PixClock max 110 MHz
(II) RADEON(0): Monitor name: L557
(II) RADEON(0): End of DDC Monitor info

(II) RADEON(0): Panel size found from DDC: 1280x1024
(II) RADEON(0): Valid Mode from Detailed timing table: 1280x1024
(II) RADEON(0): Total of 1 mode(s) found.
(II) RADEON(0): Total number of valid DDC mode(s) found: 1
(--) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(--) RADEON(0): Display dimensions: (340, 270) mm
(--) RADEON(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) RADEON(0): AGP Fast Write disabled by default
(II) RADEON(0): Depth moves disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/X11R6/lib/modules/libshadowfb.a
(II) Module shadowfb: vendor="The XFree86 Project"
	compiled for 4.3.0, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
 of this adapter, please see http://gatos.sf.net.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B]
	[1] 0	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xcffff000 - 0xcfffffff (0x1000) MX[B]
	[8] -1	0	0xcfffe000 - 0xcfffefff (0x1000) MX[B]
	[9] -1	0	0xd0000000 - 0xcfffffff (0x0) MX[B]O
	[10] -1	0	0xcfee0000 - 0xcfeeffff (0x10000) MX[B](B)
	[11] -1	0	0xb8000000 - 0xbfffffff (0x8000000) MX[B](B)
	[12] -1	0	0xcfec0000 - 0xcfedffff (0x20000) MX[B](B)
	[13] -1	0	0xcfef0000 - 0xcfefffff (0x10000) MX[B](B)
	[14] -1	0	0xc0000000 - 0xc7ffffff (0x8000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[18] 0	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
	[19] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[20] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[21] -1	0	0x0000dc00 - 0x0000dc07 (0x8) IX[B]
	[22] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
	[23] -1	0	0x0000ff00 - 0x0000ff0f (0x10) IX[B]
	[24] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
	[25] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[26] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) RADEON(0): Write-combining range (0xc0000000,0x8000000)
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1024) to (1280,1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7165
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Indirect CPU to Screen color expansion
	Solid Lines
	Scanline Image Writes
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 1026)
(II) RADEON(0): Largest offscreen area available: 1280 x 7161
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
Symbol __glXActiveScreens from module /usr/X11R6/lib/modules/extensions/libdri.a is unresolved!
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(EE) [GLX]: Failed to add GLX extension (NVIDIA XFree86 driver not found)
(II) Keyboard "Keyboard1" handled by legacy driver
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
xf86KbdEvents Resource temporarily unavailable
(II) PM Event received: User System Suspend Request
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) PM Event received: Normal Resume System
(II) Mouse1: ps2EnableDataReporting: succeeded

log z dmesg:

Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com)\
 (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk))\
 #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000ee000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
 BIOS-e820: 0000000027ff0000 - 0000000027ff8000 (ACPI data)
 BIOS-e820: 0000000027ff8000 - 0000000028000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000ffee0000 - 00000000fff00000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
639MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 163824
zone(0): 4096 pages.
zone(1): 159728 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 AMI                                       ) @ 0x000fa300
ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x27ff0000
ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT 0x0100000b) @ 0x27ff0030
ACPI: DSDT (v001    SiS      735 0x00000100 MSFT 0x0100000d) @ 0x00000000
ACPI: MADT not present
Building zonelist for node : 0
Kernel command line: BOOT_IMAGE=linux ro root=303 \

devfs=mount hdc=ide-scsi acpi=ht resume=/dev/hda7 splash=silent
ide_setup: hdc=ide-scsi
bootsplash: silent mode.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 995.773 MHz processor.
Console: colour dummy device 80x25

Calibrating delay loop... 1985.74 BogoMIPS
Memory: 644300k/655296k available (1508k kernel code, 10608k reserved,\
 -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 65536 (order: 6, 262144 bytes)
Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: 0383fbff c1c7fbff 00000000 00000000
CPU:             Common caps: 0383fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 995.7688 MHz.
..... host bus clock speed is 199.1537 MHz.
cpu: 0, clocks: 1991537, slice: 995768
CPU0
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfdb01, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router SIS [1039/0008] at 00:02.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd

kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xc0000000, mapped to 0xe8800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:56e5
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 107888 bytes, found (800x600, 107840 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 \
MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS735 ATA 100 (2nd gen) controller
    ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST340016A, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdc: R/RW 8x4x32, ATAPI CD/DVD-ROM drive
hdd: TOSHIBA DVD-ROM SD-M1612, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
spurious 8259A interrupt: IRQ7.
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 78165360 sectors (40021 MB) w/2048KiB Cache, CHS=4865/255/63, UDMA(100)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 > p3
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine:   This is normal swap space
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 299k freed
Swsusp 1.0.3: kswsuspd starting
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Got silent jpeg.
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
SiS router pirq escape (99)
SiS router pirq escape (99)
usb-ohci.c: USB OHCI at membase 0xe8a4c000, IRQ 11
usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2)
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:02.2
PCI: Sharing IRQ 5 with 00:0f.0
usb-ohci.c: USB OHCI at membase 0xe8a4e000, IRQ 5
usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controller
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usbdevfs: remount parameter error
Splash status on console 0 changed to on
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,3), internal journal
Adding Swap: 184708k swap-space (priority -1)
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: IDE-CD    Model: R/RW 8x4x32       Rev: R2,2
  Type:   CD-ROM                             ANSI SCSI revision: 02
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852

David

[David Jež]

OK, uz ted je jasne videt jak jsem rikal ze glx extense je z nvidie. Proto to nejede, az ji odstranis dostanes se o kousek dal (a asi zakysnes jinde...)
-djz

[Vít Heřman]

Asi tak nějak. Já se Radeon 9200LE snažim rozchodit už asi dva měsíce. Desku mam s KT400, jádro 2.4.22 jsem si hezky opatchoval, takže s AGP problém v jádře nejni. Ale pokud zkusim v XF86Config načíst glx a dri extensions tak mi při náběhu X zčerná monitor (nevypne se) a nic nevidim. Alespoň reaguje na CTRL+ATL+F1 a pak CTRL+ALT+DEL takže ho můžu alespoň čistě vypnout. Zkoušel jsem asi tucet dri snapshotů a verzi 3.2.8 ovladačů od ATI a ani ťuk. Mam Slackware 9.0. Zajímavý je, že dri snapshoty instalujou svoje knihovny, takže by měly přepsat ty starý ale asi to tak úplně nejni :(( Co myslíš, mam zkusit čistou instalaci Slacku a pak na to DRI snapshot? někdo na mailing listu říkal, že by se mi mohly tlouct knihovny ze snapshotů a od ATI.