abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×

dnes 02:00 | Nová verze

Byl vydán Debian 9.1, tj. první opravná verze Debianu 9 s kódovým názvem Stretch a Debian 8.9, tj. devátá opravná verze Debianu 8 s kódovým názvem Jessie. Řešeny jsou především bezpečnostní problémy, ale také několik vážných chyb. Instalační média Debianu 9 a Debianu 8 lze samozřejmě nadále k instalaci používat. Po instalaci stačí systém aktualizovat.

Ladislav Hagara | Komentářů: 0
včera 15:50 | Zajímavý článek

Nadace The Document Foundation (TDF) zastřešující vývoj svobodného kancelářského balíku LibreOffice zveřejnila čtyřiačtyřicetistránkovou výroční zprávu za rok 2016. K dispozici je ve formátu pdf ve vysokém (21,68 MB) a nízkém (7,1 MB) rozlišení. Zpráva byla vytvořena ve Scribusu.

Ladislav Hagara | Komentářů: 0
včera 14:40 | Zajímavý software

Mozilla.cz informuje, že Firefox Focus pro Android, velmi jednoduchý prohlížeč zaměřený na anonymní prohlížení, dosáhl milionu stažení. Firefox Focus blokuje sledující prvky a reklamy a při ukončení automaticky smaže všechna uložená data stránek, historii prohlížení a cookies.

Ladislav Hagara | Komentářů: 2
včera 14:20 | Komunita

Vyplněním dotazníku na Formuláře Google lze ovlivnit výběr výchozích aplikací v Ubuntu 18.04 LTS. Podrobnosti v příspěvku Dustina Kirklanda na Ubuntu Insights [reddit].

Ladislav Hagara | Komentářů: 1
21.7. 11:30 | Komunita

Etherpad (Wikipedie), svobodný online webový textový editor umožnující spolupráci v reálném čase, se stal oficiálním projektem organizace Software Freedom Conservancy (Wikipedie). Vývojáři Etherpadu se tak mohou stejně jako vývojáři dalších projektů soustředit pouze na vývoj softwaru a vše kolem zařídí Software Freedom Conservancy. Spuštěna byla instance Etherpadu pad.sfconservancy.org.

Ladislav Hagara | Komentářů: 2
21.7. 10:40 | Zajímavý článek

Lukáš Růžička se v článku Workrave ve Fedoře aneb jak si nevytunelovat karpál na MojeFedora.cz věnuje aplikaci Workrave (Wikipedie) na sledování času stráveného na počítači, která může pomoci vyhnout se negativním účinkům práce s počítačem (RSI, CTS), nebo je alespoň výrazně zmírnit.

Ladislav Hagara | Komentářů: 1
21.7. 10:00 | Komunita

Na Humble Bundle lze získat počítačovou hru Shadow Warrior: Special Edition běžící také v Linuxu zdarma. Speciální akce končí v sobotu v 19:00.

Ladislav Hagara | Komentářů: 2
20.7. 23:11 | Nová verze

Byla vydána verze 2.4.0 analyzátoru síťového provozu Wireshark. Jedná se o první stabilní verzi nové řady 2.4. Podrobný přehled novinek v poznámkách k vydání. V červnu proběhla konference SharkFest’17 US věnovaná Wiresharku. Záznamy přednášek jsou k dispozici na YouTube.

Ladislav Hagara | Komentářů: 1
20.7. 13:11 | Pozvánky

Spolek OpenAlt zve příznivce otevřeného přístupu na 142. brněnský sraz, který proběhne v pátek 21. července od 18:00 hodin ve Sport Centru Srbská (Srbská 4). Od 19:00 je pro zájemce zamluveno hřiště na plážový volejbal.

Ladislav Hagara | Komentářů: 0
20.7. 12:34 | Bezpečnostní upozornění

V GNOME Soubory, původně Nautilus, konkrétně v generování náhledů exe, msi, dll a lnk souborů byla nalezena a opravena bezpečnostní chyba CVE-2017-11421 s názvem Bad Taste. Při otevření složky obsahující tyto soubory může být spuštěn VBScript obsažen v názvech těchto souborů.

Ladislav Hagara | Komentářů: 3
Těžíte nějakou kryptoměnu?
 (4%)
 (0%)
 (19%)
 (77%)
Celkem 26 hlasů
 Komentářů: 0
    Rozcestník

    Dotaz: 3D PROPHET 9700 PRO

    11.12.2003 22:09 kkopi
    3D PROPHET 9700 PRO
    Přečteno: 145×
    Zajimalo byme jestli nekdo tuto grafickou kartu rozchodil pod Linuxem jsem zacaecnik a potreboval bych poradit ja ji rozject ve 3D nainstaloval jsem si rpm balicek ze stranek ATI ale furt nemohu rozject to ve 3D mam Mandrake 9.2 (nekde jsem se docetl ze by melo pomoc zmenit bios grafiky ) PS:pokud mozno nejaky navod pro blby dekuji predem za odpoved

    Odpovědi

    14.12.2003 20:51 kkopi
    Rozbalit Rozbalit vše 3D PROPHET 9700 PRO
    v logu XFree jsem nasel erory ze nemuze inicializovat agp tato se objevu je i v redhatu 9 poradte chtelbych si zaparit quaka 3
    18.12.2003 13:33 HonP
    Rozbalit Rozbalit vše 3D PROPHET 9700 PRO
    Potrebujes podporu pro AGP(je to modul do jadra, nebo je zakompilovana primo v jadre jmenuje se to nejak AGPgart). Potom v /etc/x11/XF86Config nastavis u modulu DRI a ovladac karty das radeon a mas akceleraci zaplou. TOTO JE KDYZ NEMAS OVLADACE OD ATI, kdyz je mas, koukni do README a jednej. Jinak otazka: V cem jsou ty ovladace od ATI lepsi nez z DRI?
    20.12.2003 01:04 kkopi
    Rozbalit Rozbalit vše 3D PROPHET 9700 PRO
    agp podporu mam zakompilovanou i jsem skousel vyuzit agp z ovladacu ale nic furt to hlasi ze nemuze inicialyzovat agp jiz si nevim rady
    20.12.2003 03:46 kkopi
    Rozbalit Rozbalit vše 3D PROPHET 9700 PRO
    pro uplnost zde dam kus vypisu dmesg :
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
    [fglrx] module loaded - fglrx 3.2.8 [Sep 21 2003] on minor 0
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    Linux agpgart interface v0.99 (c) Jeff Hartmann
    agpgart: Maximum main memory to use for agp memory: 439M
    agpgart: Detected Via Apollo Pro KT400 chipset
    agpgart: unable to determine aperture size.
    [fglrx:firegl_unlock] *ERROR* Process 2635 using kernel context 0
    a fglrxinfo hlasi toto :
    Loading required GL library /usr/lib/libGL.so.1
    display: :0.0  screen: 0
    OpenGL vendor string: Mesa project: www.mesa3d.org
    OpenGL renderer string: Mesa GLX Indirect
    OpenGL version string: 1.3 Mesa 4.0.4
    a XFree86.O.log:
    XFree86 Version 4.3.0
    Release Date: 9 May 2003
    X Protocol Version 11, Revision 0, Release 6.6
    Build Operating System: Linux 2.4.18-23mdksmp i686 [ELF]
    Build Date: 10 September 2003
    	Before reporting problems, check http://www.XFree86.Org/
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
             (++) from command line, (!!) notice, (II) informational,
             (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/XFree86.0.log", Time: Sat Dec 20 03:10:59 2003
    (==) Using config file: "/etc/X11/XF86Config-4"
    (==) ServerLayout "Server Layout"
    (**) |-->Screen "Screen0" (0)
    (**) |   |-->Monitor "Monitor0"
    (**) |   |-->Device "ATI Graphics Adapter"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (**) Option "AutoRepeat" "500 30"
    (**) Option "XkbRules" "xfree86"
    (**) XKB: rules: "xfree86"
    (**) Option "XkbModel" "pc101"
    (**) XKB: model: "pc101"
    (**) Option "XkbLayout" "cs"
    (**) XKB: layout: "cs"
    (==) Keyboard: CustomKeycode disabled
    (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,
    /usr/X11R6/lib/X11/fonts/75dpi/:unscaled,
    /usr/X11R6/lib/X11/fonts/Type1/,
    /usr/X11R6/lib/X11/fonts/Speedo/,
    /usr/X11R6/lib/X11/fonts/75dpi/"
    (**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
    (==) ModulePath set to "/usr/X11R6/lib/modules"
    Using vt 7
    (--) using VT number 7
    
    (WW) Open APM failed (/dev/apm_bios) (No such file or directory)
    (II) Module ABI versions:
    	XFree86 ANSI C Emulation: 0.2
    	XFree86 Video Driver: 0.6
    	XFree86 XInput driver : 0.4
    	XFree86 Server Extension : 0.2
    	XFree86 Font Renderer : 0.4
    (II) Loader running on linux
    (II) LoadModule: "bitmap"
    (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
    (II) Module bitmap: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Bitmap
    (II) LoadModule: "pcidata"
    (II) Loading /usr/X11R6/lib/modules/libpcidata.a
    (II) Module pcidata: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Video Driver, version 0.6
    (II) PCI: Probing config type using method 1
    (II) PCI: Config type is 1
    (II) PCI: stages = 0x03, oldVal1 = 0x8000302c, mode1Res1 = 0x80000000
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1106,3189 card 1106,0000 rev 00 class 06,00,00 hdr 00
    (II) PCI: 00:01:0: chip 1106,b168 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:06:0: chip 1102,0004 card 1102,1002 rev 04 class 04,01,00 hdr 80
    (II) PCI: 00:06:1: chip 1102,7003 card 1102,0060 rev 04 class 09,80,00 hdr 80
    (II) PCI: 00:06:2: chip 1102,4001 card 1102,0010 rev 04 class 0c,00,10 hdr 80
    (II) PCI: 00:0a:0: chip 1131,7134 card 1131,0000 rev 01 class 04,80,00 hdr 00
    (II) PCI: 00:0d:0: chip 105a,3376 card 105a,6620 rev 02 class 01,04,00 hdr 00
    (II) PCI: 00:0f:0: chip 14e4,16a6 card 1462,585b rev 02 class 02,00,00 hdr 00
    (II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
    (II) PCI: 00:10:3: chip 1106,3104 card 1106,3104 rev 82 class 0c,03,20 hdr 00
    (II) PCI: 00:11:0: chip 1106,3177 card 1106,0000 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:11:1: chip 1106,0571 card 1106,0571 rev 06 class 01,01,8a hdr 00
    (II) PCI: 01:00:0: chip 1002,4e44 card 1002,0002 rev 00 class 03,00,00 hdr 80
    (II) PCI: 01:00:1: chip 1002,4e64 card 1002,0003 rev 00 class 03,80,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) Bus 0 non-prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) Bus 0 prefetchable memory range:
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
    (II) Bus 1 I/O range:
    	[0] -1	0	0x0000b000 - 0x0000b0ff (0x100) IX[B]
    	[1] -1	0	0x0000b400 - 0x0000b4ff (0x100) IX[B]
    	[2] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
    	[3] -1	0	0x0000bc00 - 0x0000bcff (0x100) IX[B]
    (II) Bus 1 non-prefetchable memory range:
    	[0] -1	0	0xdfe00000 - 0xdfefffff (0x100000) MX[B]
    (II) Bus 1 prefetchable memory range:
    	[0] -1	0	0xbfd00000 - 0xdfcfffff (0x20000000) MX[B]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (--) PCI:*(1:0:0) ATI Technologies Inc Radeon R300 ND
     [Radeon 9700] rev 0, Mem @ 0xd0000000/27, 0xdfef0000/16,
     I/O @ 0xb800/8, BIOS @ 0xdfec0000/17
    (--) PCI: (1:0:1) ATI Technologies Inc Radeon R300 [Radeon
     9700 Pro] (Secondary) rev 0, Mem @ 0xc8000000/27,
     0xdfee0000/16
    (II) Addressable bus resource ranges are
    	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
    	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
    (II) OS-reported resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
    (II) Active PCI resource ranges:
    	[0] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[1] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[3] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[4] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[5] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[7] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[8] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[9] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[10] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[12] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[13] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[14] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[15] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[16] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[17] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[18] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[19] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[20] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[21] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    (II) Active PCI resource ranges after removing overlaps:
    	[0] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[1] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[2] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[3] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[4] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[5] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[6] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[7] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[8] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[9] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[10] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[11] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[12] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[13] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[14] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[15] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[16] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[17] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[18] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[19] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[20] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[21] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    (II) All system resource ranges:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[6] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[8] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[9] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[10] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[13] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[14] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[15] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[16] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[19] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[20] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[21] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[22] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[23] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[24] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[25] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[26] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[27] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[28] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    (II) LoadModule: "dbe"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
    (II) Module dbe: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	Module class: XFree86 Server Extension
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
    (II) Module extmod: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	Module class: XFree86 Server Extension
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension FontCache
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "type1"
    (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
    (II) Module type1: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.2
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font Type1
    (II) Loading font CID
    (II) LoadModule: "freetype"
    (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
    (II) Module freetype: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 2.0.2
    	Module class: XFree86 Font Renderer
    	ABI class: XFree86 Font Renderer, version 0.4
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
    (II) Module glx: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "GLcore"
    (II) LoadModule: "GLcore"
    (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
    (II) Module GLcore: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension GLX
    (II) LoadModule: "dri"
    (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
    (II) Module dri: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading sub module "drm"
    (II) LoadModule: "drm"
    (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
    (II) Module drm: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Server Extension, version 0.2
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "fglrx"
    (II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
    (II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
    	compiled for 4.3.0, module version = 3.2.8
    	Module class: XFree86 Video Driver
    	ABI class: XFree86 Video Driver, version 0.6
    (II) LoadModule: "mouse"
    (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
    (II) Module mouse: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	Module class: XFree86 XInput Driver
    	ABI class: XFree86 XInput driver, version 0.4
    (II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
    	ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
    	ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
    	ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
    	ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
    	ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
    	ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
    	ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
    	ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
    	ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
    	ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
    	ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
    	ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
    	ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
    	ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
    	ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
    	ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
    	ATI R350 NK (Fire GL unknown)
    (II) Primary Device is: PCI 01:00:0
    (WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
    (--) Chipset ATI R300 ND (R9700 PRO) found
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[6] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[8] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[9] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[10] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[13] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[14] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[15] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[16] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[19] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[20] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[21] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[22] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[23] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[24] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[25] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[26] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[27] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[28] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    (II) fglrx(0): pEnt->device->identifier=0x0820a158
    (II) resource ranges after probing:
    	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[5] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[6] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[7] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[8] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[9] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[10] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[12] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[13] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[14] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[15] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[16] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[17] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[18] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[19] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[22] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[23] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[24] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[25] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[26] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[27] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[28] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[29] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[30] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[31] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    	[32] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[33] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Setting vga for screen 0.
    (II) fglrx(0): === [R200PreInit] === begin, [s]
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/X11R6/lib/modules/libvgahw.a
    (II) Module vgahw: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 0.1.0
    	ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): PCI bus 1 card 0 func 0
    (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
    (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) fglrx(0): Default visual is TrueColor
    (**) fglrx(0): Option "NoAccel" "no"
    (**) fglrx(0): Option "NoDRI" "no"
    (**) fglrx(0): Option "Capabilities" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionI" "0x00000000"
    (**) fglrx(0): Option "GammaCorrectionII" "0x00000000"
    (**) fglrx(0): Option "OpenGLOverlay" "off"
    (**) fglrx(0): Option "VideoOverlay" "on"
    (**) fglrx(0): Option "DesktopSetup" "0x00000000"
    (**) fglrx(0): Option "MonitorLayout" "AUTO, AUTO"
    (**) fglrx(0): Option "HSync2" "unspecified"
    (**) fglrx(0): Option "VRefresh2" "unspecified"
    (**) fglrx(0): Option "ScreenOverlap" "0"
    (**) fglrx(0): Option "IgnoreEDID" "off"
    (**) fglrx(0): Option "UseInternalAGPGART" "no"
    (**) fglrx(0): Option "Stereo" "off"
    (**) fglrx(0): Option "StereoSyncEnable" "1"
    (**) fglrx(0): Option "UseFastTLS" "0"
    (**) fglrx(0): Option "BlockSignalsOnLock" "on"
    (**) fglrx(0): Option "ForceGenericCPU" "no"
    (**) fglrx(0): Option "CenterMode" "off"
    (**) fglrx(0): Option "FSAAScale" "1"
    (**) fglrx(0): Option "FSAADisableGamma" "no"
    (**) fglrx(0): Option "FSAACustomizeMSPos" "no"
    (**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
    (**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
    (**) fglrx(0): Option "NoTV" "yes"
    (**) fglrx(0): Option "TVStandard" "NTSC-M"
    (**) fglrx(0): Option "TVHSizeAdj" "0"
    (**) fglrx(0): Option "TVVSizeAdj" "0"
    (**) fglrx(0): Option "TVHPosAdj" "0"
    (**) fglrx(0): Option "TVVPosAdj" "0"
    (**) fglrx(0): Option "TVHStartAdj" "0"
    (**) fglrx(0): Option "TVColorAdj" "0"
    (**) fglrx(0): Option "PseudoColorVisuals" "off"
    (**) fglrx(0): Qbs disabled
    (==) fglrx(0): RGB weight 888
    (II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
    (**) fglrx(0): Gamma Correction for I is 0x00000000
    (**) fglrx(0): Gamma Correction for II is 0x00000000
    (==) fglrx(0): Buffer Tiling is ON
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/X11R6/lib/modules/linux/libint10.a
    (II) Module int10: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): initializing int10
    (II) fglrx(0): Primary V_BIOS segment is: 0xc000
    (--) fglrx(0): Chipset: "ATI R300 ND (R9700 PRO)" (Chipset = 0x4e44)
    (--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x0002)
    (--) fglrx(0): board vendor info: original ATI grafics adapter
    (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
    (--) fglrx(0): MMIO registers at 0xdfef0000
    
    (--) fglrx(0): ROM-BIOS at 0xdfec0000
    (--) fglrx(0): ChipExtRevID = 0x00
    (--) fglrx(0): ChipIntRevID = 0x02
    (--) fglrx(0): VideoRAM: 131072 kByte (64-bit SDR SDRAM)
    (II) fglrx(0): board/chipset is supported by this driver (original ATI board)
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Loading /usr/X11R6/lib/modules/libddc.a
    (II) Module ddc: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 Video Driver, version 0.6
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Loading /usr/X11R6/lib/modules/libi2c.a
    (II) Module i2c: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.2.0
    	ABI class: XFree86 Video Driver, version 0.6
    (II) fglrx(0): I2C bus "DDC" initialized.
    (II) fglrx(0): Connector Layout from BIOS --------
    (II) fglrx(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
    (II) fglrx(0): Connector0: DDCType-2, DACType-1, TMDSType-0, ConnectorType-3
    (**) fglrx(0): MonitorLayout Option:
    	Monitor1--Type AUTO, Monitor2--Type AUTO
    
    (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) fglrx(0): I2C device "DDC:ddc2" removed.
    (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) fglrx(0): I2C device "DDC:ddc2" removed.
    (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) fglrx(0): I2C device "DDC:ddc2" removed.
    (II) fglrx(0): DDC detected on DDCType 2 with Monitor Type 0
    (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) fglrx(0): I2C device "DDC:ddc2" removed.
    (II) fglrx(0): I2C device "DDC:ddc2" registered at address 0xA0.
    (II) fglrx(0): I2C device "DDC:ddc2" removed.
    (II) fglrx(0): DDC detected on DDCType 3 with Monitor Type 1
    (II) fglrx(0): Primary head:
     Monitor   -- NONE
     Connector -- DVI-I
     DAC Type  -- TVDAC/ExtDAC
     TMDS Type -- Internal
     DDC Type  -- DVI_DDC
    (II) fglrx(0): Secondary head:
     Monitor   -- CRT
     Connector -- VGA
     DAC Type  -- Primary
     TMDS Type -- NONE
     DDC Type  -- VGA_DDC
    (II) fglrx(0): EDID data from the display on Secondary head ---------------------------
    (II) fglrx(0): Manufacturer: AST  Model: 4d70  Serial#: 0
    (II) fglrx(0): Year: 1996  Week: 38
    (II) fglrx(0): EDID Version: 1.0
    (II) fglrx(0): Analog Display Input,  Input Voltage Level: 0.714/0.286 V
    (II) fglrx(0): Sync:  Separate  Composite  SyncOnGreen
    (II) fglrx(0): Max H-Image Size [cm]: horiz.: 31  vert.: 23
    (II) fglrx(0): Gamma: 2.13
    (II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
    (II) fglrx(0): redX: 0.625 redY: 0.340   greenX: 0.274 greenY: 0.604
    (II) fglrx(0): blueX: 0.149 blueY: 0.064   whiteX: 0.282 whiteY: 0.298
    (II) fglrx(0): Supported VESA Video Modes:
    (II) fglrx(0): 720x400@70Hz
    (II) fglrx(0): 720x400@88Hz
    (II) fglrx(0): 640x480@60Hz
    (II) fglrx(0): 640x480@67Hz
    (II) fglrx(0): 640x480@72Hz
    (II) fglrx(0): 640x480@75Hz
    (II) fglrx(0): 800x600@56Hz
    (II) fglrx(0): 800x600@60Hz
    (II) fglrx(0): 800x600@72Hz
    (II) fglrx(0): 800x600@75Hz
    (II) fglrx(0): 832x624@75Hz
    (II) fglrx(0): 1024x768@87Hz (interlaced)
    (II) fglrx(0): 1024x768@60Hz
    (II) fglrx(0): 1024x768@70Hz
    (II) fglrx(0): 1024x768@75Hz
    (II) fglrx(0): Manufacturer's mask: 0
    (II) fglrx(0): Supported additional Video Mode:
    (II) fglrx(0): clock: 106.0 MHz   Image Size:  306 x 230 mm
    (II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1472 h_blank_end 1664 h_border: 0
    (II) fglrx(0): v_active: 1024  v_sync: 1027  v_sync_end 1030 v_blanking: 1060 v_border: 0
    (II) fglrx(0):
    (II) fglrx(0): DesktopSetup 0x0000
    (**) fglrx(0):  PseudoColor visuals disabled
    (**) fglrx(0): Overlay disabled
    (**) fglrx(0): Overlay disabled
    (II) fglrx(0): PLL parameters: rf=2700 rd=12 min=20000 max=40000; xclk=31000
    (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
    (**) fglrx(0): Center Mode is disabled
    (==) fglrx(0): TMDS coherent mode is enabled
    (II) fglrx(0): Total 5 valid mode(s) found.
    (--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
    (**) fglrx(0): *Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    (II) fglrx(0): Modeline "1024x768"   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync
    (**) fglrx(0):  Default mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    (II) fglrx(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
    (**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    (II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
    (**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    (II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
    (**) fglrx(0):  Default mode "1x1": 2.6 MHz (scaled from 0.0 MHz), 10.0 kHz, 38.6 Hz
    (II) fglrx(0): Modeline "1x1"    2.57  1 2 3 258  1 1 18 258
    (--) fglrx(0): Display dimensions: (310, 230) mm
    (--) fglrx(0): DPI set to (83, 84)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/X11R6/lib/modules/libfb.a
    (II) Module fb: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.0.0
    	ABI class: XFree86 ANSI C Emulation, version 0.2
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Loading /usr/X11R6/lib/modules/libramdac.a
    (II) Module ramdac: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 0.1.0
    	ABI class: XFree86 Video Driver, version 0.6
    (**) fglrx(0): NoAccel = NO
    (II) Loading sub module "xaa"
    (II) LoadModule: "xaa"
    (II) Loading /usr/X11R6/lib/modules/libxaa.a
    (II) Module xaa: vendor="The XFree86 Project"
    	compiled for 4.3.0, module version = 1.1.0
    	ABI class: XFree86 Video Driver, version 0.6
    (**) fglrx(0): FSAAScale=1
    (**) fglrx(0): FSAA Gamma 138554291
    (**) fglrx(0): FSAA Multisample Position is 138556163
    (**) fglrx(0): NoDRI = NO
    (II) Loading sub module "fglrxdrm"
    (II) LoadModule: "fglrxdrm"
    (II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
    (II) Module fglrxdrm: vendor="Fire GL - ATI Research GmbH, Germany"
    	compiled for 4.3.0, module version = 3.2.8
    	ABI class: XFree86 Server Extension, version 0.2
    (II) fglrx(0): Depth moves disabled by default
    (**) fglrx(0): Capabilities: 0x00000000
    (**) fglrx(0): cpuFlags: 0x4000000f
    (**) fglrx(0): cpuSpeedMHz: 0x00000828
    (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
    (**) fglrx(0): using built in AGPGART module: no
    (**) fglrx(0): UseFastTLS=0
    (**) fglrx(0): BlockSignalsOnLock=1
    (==) fglrx(0): EnablePrivateBackZ = NO
    (II) fglrx(0): using CAIL version [ATI LIB=CAIL.LIB,IA32,2.0024]
    (--) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] 0	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B]
    	[1] 0	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
    	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
    	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[7] -1	0	0xdfffe700 - 0xdfffe7ff (0x100) MX[B]
    	[8] -1	0	0xdffc0000 - 0xdffdffff (0x20000) MX[B]
    	[9] -1	0	0xdffff000 - 0xdfffffff (0x1000) MX[B]
    	[10] -1	0	0xdfffe000 - 0xdfffe3ff (0x400) MX[B]
    	[11] -1	0	0xdfff4000 - 0xdfff7fff (0x4000) MX[B]
    	[12] -1	0	0xdfffe800 - 0xdfffefff (0x800) MX[B]
    	[13] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
    	[14] -1	0	0xdfee0000 - 0xdfeeffff (0x10000) MX[B](B)
    	[15] -1	0	0xc8000000 - 0xcfffffff (0x8000000) MX[B](B)
    	[16] -1	0	0xdfec0000 - 0xdfedffff (0x20000) MX[B](B)
    	[17] -1	0	0xdfef0000 - 0xdfefffff (0x10000) MX[B](B)
    	[18] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[22] 0	0	0x0000b800 - 0x0000b8ff (0x100) IX[B]
    	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
    	[25] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    	[26] -1	0	0x0000d800 - 0x0000d81f (0x20) IX[B]
    	[27] -1	0	0x0000d400 - 0x0000d41f (0x20) IX[B]
    	[28] -1	0	0x0000d000 - 0x0000d01f (0x20) IX[B]
    	[29] -1	0	0x0000e000 - 0x0000e07f (0x80) IX[B]
    	[30] -1	0	0x0000e400 - 0x0000e40f (0x10) IX[B]
    	[31] -1	0	0x0000e800 - 0x0000e83f (0x40) IX[B]
    	[32] -1	0	0x0000ec00 - 0x0000ec07 (0x8) IX[B]
    	[33] -1	0	0x0000dc00 - 0x0000dc3f (0x40) IX[B]
    	[34] -1	0	0x0000b800 - 0x0000b8ff (0x100) IX[B](B)
    	[35] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[36] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) fglrx(0): UMM area:     0xd0500000 (size=0x07b00000)
    (II) fglrx(0): driver needs XFree86 version: 4.3.x
    (II) fglrx(0): detected XFree86 version: 4.3.0
    (II) Loading extension ATIFGLRXDRI
    (II) fglrx(0): doing DRIScreenInit
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: open result is -1, (No such device)
    drmOpenDevice: Open failed
    [drm] failed to load kernel module "agpgart"
    drmOpenDevice: minor is 0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 6, (OK)
    drmGetBusid returned ''
    (II) fglrx(0): [drm] loaded kernel module for "fglrx" driver
    (II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
    (II) fglrx(0): [drm] added 8192 byte SAREA at 0xe0ac9000
    (II) fglrx(0): [drm] mapped SAREA 0xe0ac9000 to 0x4021a000
    (II) fglrx(0): [drm] framebuffer handle = 0xd0000000
    (II) fglrx(0): [drm] added 1 reserved context for kernel
    (II) fglrx(0): DRIScreenInit done
    (II) fglrx(0): Kernel Module Version Information:
    (II) fglrx(0):     Name: fglrx
    (II) fglrx(0):     Version: 3.2.8
    (II) fglrx(0):     Date: Sep 21 2003
    (II) fglrx(0):     Desc: ATI Fire GL DRM kernel module
    (II) fglrx(0): Kernel Module version matches driver.
    (II) fglrx(0): Kernel Module Build Time Information:
    (II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.4.22-10mdk
    (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
    (II) fglrx(0):     Build-Kernel __SMP__:            no
    (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
    (II) fglrx(0): [drm] register handle = 0xdfef0000
    (EE) fglrx(0): [agp] unable to acquire AGP, error "xf86_ENODEV"
    (EE) fglrx(0): cannot init AGP
    (II) fglrx(0): [drm] removed 1 reserved context for kernel
    (II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xe0ac9000 at 0x4021a000
    (WW) fglrx(0): ***********************************************
    (WW) fglrx(0): * DRI initialization failed!                  *
    (WW) fglrx(0): * (maybe driver kernel module missing or bad) *
    (WW) fglrx(0): * 2D acceleraton available (MMIO)             *
    (WW) fglrx(0): * no 3D acceleration available                *
    (WW) fglrx(0): ********************************************* *
    (II) fglrx(0): FBADPhys: 0xd0000000 FBMappedSize: 0x08000000
    (==) fglrx(0): Write-combining range (0xd0000000,0x8000000)
    (II) fglrx(0): FBMM initialized for area (0,0)-(1024,8191)
    (II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
    (==) fglrx(0): Backing store disabled
    (==) fglrx(0): Silken mouse enabled
    (II) fglrx(0): Using hardware cursor (scanline 768)
    (II) fglrx(0): Largest offscreen area available: 1024 x 7419
    (**) Option "dpms"
    (**) fglrx(0): DPMS enabled
    (II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
    	Screen to screen bit blits
    	Solid filled rectangles
    	Solid Horizontal and Vertical Lines
    	Offscreen Pixmaps
    	Setting up tile and stipple cache:
    		32 128x128 slots
    		32 256x256 slots
    		16 512x512 slots
    (II) fglrx(0): Acceleration enabled
    (II) fglrx(0): Direct rendering disabled
    (II) Loading extension FGLRXEXTENSION
    (II) Loading extension ATITVOUT
    (==) RandR enabled
    (II) Setting vga for screen 0.
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension LBX
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFree86-Bigfont
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (**) Option "Protocol" "ImPS/2"
    (**) Mouse1: Protocol: "ImPS/2"
    (**) Option "CorePointer"
    (**) Mouse1: Core Pointer
    (**) Option "Device" "/dev/mouse"
    (**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
    (**) Option "ZAxisMapping" "4 5"
    (**) Mouse1: ZAxisMapping: buttons 4 and 5
    (**) Mouse1: Buttons: 5
    (II) Keyboard "Keyboard1" handled by legacy driver
    (II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
    (II) Server_Terminate keybinding not found
    (II) Mouse1: ps2EnableDataReporting: succeeded
    Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
    a nakonec XF86Config-4 :
    # File: XF86Config-4
    # File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.
    
    # *************************************
    # Refer to the XF86Config(4/5) man page for details about the format of
    # this file.
    # *************************************
    
    # ***************************************
    # DRI Section
    # *************************************
    Section "dri"
    # Access to OpenGL ICD is allowed for all users:
        Mode 0666
    # Access to OpenGL ICD is restricted to a specific user group:
    #    Group 100    # users
    #    Mode 0660
    EndSection
    
    # ********************************************
    # Module section -- this  section  is used to specify
    # which dynamically loadable modules to load.
    # ********************************************
    #
    Section "Module"
    
    # This loads the DBE extension module.
    
        Load        "dbe"  	# Double buffer extension
    
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
        SubSection  "extmod"
          Option    "omit xfree86-dga"   # don't initialise the DGA extension
        EndSubSection
    
    # This loads the Type1 and FreeType font modules
        Load        "type1"
        Load        "freetype"
    
    # This loads the GLX module
        Load        "glx"   # libglx.a
        Load        "dri"   # libdri.a
    
    EndSection
    
    # ****************************************
    # Files section.  This allows default font and rgb paths to be set
    # ****************************************
    
    Section "Files"
    
    # The location of the RGB database.  Note, this is the name of the
    # file minus the extension (like ".txt" or ".db").  There is normally
    # no need to change the default.
    
        RgbPath	"/usr/X11R6/lib/X11/rgb"
    
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    #
    # If you don't have a floating point coprocessor and emacs, Mosaic or other
    # programs take long to start up, try moving the Type1 and Speedo directory
    # to the end of this list (or comment them out).
    #
    
    #    FontPath   "/usr/X11R6/lib/X11/fonts/local/"
        FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
        FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
        FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
        FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    #    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
    
    # The module search path.  The default path is shown here.
    
    #    ModulePath "/usr/X11R6/lib/modules"
    
    EndSection
    
    # ******************************************
    # Server flags section.
    # ******************************************
    
    Section "ServerFlags"
    
    # Uncomment this to cause a core dump at the spot where a signal is
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    
    #    Option "NoTrapSignals"
    
    # Uncomment this to disable the  server abort sequence
    # This allows clients to receive this key event.
    
    #    Option "DontZap"
    
    # Uncomment this to disable the / mode switching
    # sequences.  This allows clients to receive these key events.
    
    #    Option "Dont Zoom"
    
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    
    #    Option "DisableVidModeExtension"
    
    # Uncomment this to enable the use of a non-local xvidtune client.
    
    #    Option "AllowNonLocalXvidtune"
    
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    
    
    #    Option "DisableModInDev"
    
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    
    #    Option "AllowNonLocalModInDev"
    
    EndSection
    
    # ******************************************
    # Input devices
    # ******************************************
    
    # ******************************************
    # Core keyboard's InputDevice section
    # ******************************************
    
    Section "InputDevice"
    
        Identifier	"Keyboard1"
        Driver	"Keyboard"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    
    #    Option "Protocol"   "Xqueue"
    
        Option "AutoRepeat" "500 30"
    
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    #    Option "Xleds"      "1 2 3"
    
    #    Option "LeftAlt"    "Meta"
    #    Option "RightAlt"   "ModeShift"
    
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults).  For example, for a non-U.S.
    # keyboard, you will probably want to use:
    #    Option "XkbModel"   "pc102"
    # If you have a US Microsoft Natural keyboard, you can use:
    #    Option "XkbModel"   "microsoft"
    #
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    #    Option "XkbLayout"  "de"
    # or:
    #    Option "XkbLayout"  "de"
    #    Option "XkbVariant" "nodeadkeys"
    #
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    #    Option "XkbOptions" "ctrl:swapcaps"
    
    # These are the default XKB settings for XFree86
    #    Option "XkbRules"   "xfree86"
    #    Option "XkbModel"   "pc101"
    #    Option "XkbLayout"  "us"
    #    Option "XkbVariant" ""
    #    Option "XkbOptions" ""
    
    #    Option "XkbDisable"
    
        Option "XkbRules"	"xfree86"
        Option "XkbModel"	"pc101"
        Option "XkbLayout"	"cs"
    
    EndSection
    
    
    # *******************************************
    # Core Pointer's InputDevice section
    # ********************************************
    
    Section "InputDevice"
    
    # Identifier and driver
    
        Identifier	"Mouse1"
        Driver "mouse"
        Option "Protocol"   "ImPS/2"
        Option "ZAxisMapping"   "4 5"
        Option "Device"     "/dev/mouse"
    
    # When using XQUEUE, comment out the above two lines, and uncomment
    # the following line.
    
    #    Option "Protocol"   "Xqueue"
    
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    
    #    Option "BaudRate"   "9600"
    #    Option "SampleRate" "150"
    
    # Emulate3Buttons is an option for 2-button Microsoft mice
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    
    #    Option "Emulate3Buttons"
    #    Option "Emulate3Timeout"    "50"
    
    # ChordMiddle is an option for some 3-button Logitech mice
    
    #    Option "ChordMiddle"
    
    EndSection
    
    
    # *****************************************
    # Other input device sections 
    # this is optional and is required only if you
    # are using extended input devices.  This is for example only.  Refer
    # to the XF86Config man page for a description of the options.
    # *****************************************
    #
    # Section "InputDevice" 
    #    Identifier  "Mouse2"
    #    Driver      "mouse"
    #    Option      "Protocol"      "MouseMan"
    #    Option      "Device"        "/dev/mouse2"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball"
    #    Driver     "magellan"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "spaceball2"
    #    Driver     "spaceorb"
    #    Option     "Device"         "/dev/cua0"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen0"
    #    Driver     "microtouch"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "1412"
    #    Option     "MaxX"           "15184"
    #    Option     "MinY"           "15372"
    #    Option     "MaxY"           "1230"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    #
    # Section "InputDevice"
    #    Identifier "touchscreen1"
    #    Driver     "elo2300"
    #    Option     "Device"         "/dev/ttyS0"
    #    Option     "MinX"           "231"
    #    Option     "MaxX"           "3868"
    #    Option     "MinY"           "3858"
    #    Option     "MaxY"           "272"
    #    Option     "ScreenNumber"   "0"
    #    Option     "ReportingMode"  "Scaled"
    #    Option     "ButtonThreshold"    "17"
    #    Option     "ButtonNumber"   "1"
    #    Option     "SendCoreEvents"
    # EndSection
    
    # *******************************************
    # Monitor section
    # *******************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
        Identifier  "Monitor0"
        HorizSync   31.5 - 60.0
        VertRefresh 60 - 85
        Option "DPMS"
    
    # === mode lines based on GTF ===
    # VGA @ 100Hz
    # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
    # SVGA @ 100Hz
    # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
    # XVGA @ 100Hz
    # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
    # 1152x864 @ 60Hz
    # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
    # 1152x864 @ 85Hz
    # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
    # 1152x864 @ 100Hz
    # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
    # 1280x960 @ 75Hz
    # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
    # 1280x960 @ 100Hz
    # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
    # SXGA @ 100Hz
    # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
    # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
    # Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
    # 1600x1000 @ 60Hz
    # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
    # 1600x1000 @ 75Hz
    # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
    # 1600x1000 @ 85Hz
    # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
    # 1600x1000 @ 100Hz
    # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
    # 1600x1024 @ 60Hz
    # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
    # 1600x1024 @ 75Hz
    # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
    # 1600x1024 @ 76Hz
    # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
    # 1600x1024 @ 85Hz
    # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
    # 1920x1080 @ 60Hz
    # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
    # 1920x1080 @ 75Hz
    # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
    # 1920x1200 @ 60Hz
    # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
    # 1920x1200 @ 75Hz
    # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 1400x1050 @ 60Hz M9 Laptop mode 
    # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
    # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
    # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
    
    EndSection
    
    
    # *****************************************
    # Graphics device section
    # *****************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset     "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver      "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # installed.
    
    #    BusID       "PCI:0:10:0"
    
    #    VideoRam    256
    
    #    Clocks      25.2 28.3
    
    EndSection
    
    # === ATI device section ===
    
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
    # === disable PnP Monitor  ===
        #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === FireGL DDX driver module specific settings ===
    # === Screen Management ===
        Option "DesktopSetup"               "0x00000000" 
        Option "MonitorLayout"              "AUTO, AUTO"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "unspecified"
        Option "VRefresh2"                  "unspecified"
        Option "ScreenOverlap"              "0"
    # === TV-out Management ===
        Option "NoTV"                       "yes"
        Option "TVStandard"                 "NTSC-M"     
        Option "TVHSizeAdj"                 "0"
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"
        Option "TVVPosAdj"                  "0"     
        Option "TVHStartAdj"                "0"
        Option "TVColorAdj"                 "0"
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "no"
        Option "ForceGenericCPU"            "no"
        BusID "PCI:1:0:0"    # vendor=1002, device=4e44
        Screen 0
    EndSection
    
    # ****************************************
    # Screen sections
    # ****************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
    
        Subsection "Display"
            Depth       24
            Modes       "1024x768"
            ViewPort    0 0  # initial origin if mode is smaller than desktop
    #        Virtual     1280 1024
        EndSubsection
    EndSection
    
    # ********************************************
    # ServerLayout sections.
    # ********************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Server Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.
    
        Screen "Screen0"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    ### EOF ###
    
    Dofam ze to pomuze a nekdo me pomuze

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.