abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×

dnes 00:44 | Pozvánky

V sobotu 21. října 2017 se na půdě Elektrotechnické fakulty ČVUT v Praze uskuteční RT-Summit – setkání vývojářů linuxového jádra a uživatelů jeho real-time verze označované jako preempt-rt.

… více »
Pavel Píša | Komentářů: 4
včera 23:44 | Bezpečnostní upozornění

V Linuxu byla nalezena bezpečnostní chyba CVE-2017-15265 zneužitelná k lokální eskalaci práv. Jedná se o chybu v části ALSA (Advanced Linux Sound Architecture).

Ladislav Hagara | Komentářů: 1
včera 22:44 | Komunita

Greg Kroah-Hartman informuje na svém blogu, že do zdrojových kódu linuxového jádra bylo přidáno (commit) prohlášení Linux Kernel Enforcement Statement. Zdrojové kódy Linuxu jsou k dispozici pod licencí GPL-2.0. Prohlášení přidává ustanovení z GPL-3.0. Cílem je chránit Linux před patentovými trolly, viz například problém s bývalým vedoucím týmu Netfilter Patrickem McHardym. Více v často kladených otázkách (FAQ).

Ladislav Hagara | Komentářů: 4
včera 22:04 | Pozvánky

Rádi bychom vás pozvali na přednášku o frameworku Avocado. Jedná se o testovací framework další generace, inspirovaný Autotestem a moderními vývojovými nástroji, jako je třeba git. Přednáška se bude konat 23. října od 17 hodin na FEL ČVUT (Karlovo náměstí, budova E, auditorium K9 – KN:E 301). Více informací na Facebooku.

… více »
mjedlick | Komentářů: 0
včera 21:44 | Bezpečnostní upozornění

Nový útok na WPA2 se nazývá KRACK a postihuje prakticky všechna Wi-Fi zařízení / operační systémy. Využívá manipulace s úvodním handshake. Chyba by měla být softwarově opravitelná, je nutné nainstalovat záplaty operačních systémů a aktualizovat firmware zařízení (až budou). Mezitím je doporučeno používat HTTPS a VPN jako další stupeň ochrany.

Václav HFechs Švirga | Komentářů: 2
15.10. 00:11 | Zajímavý projekt

Server Hackaday představuje projekt RainMan 2.0, aneb jak naučit Raspberry Pi 3 s kamerovým modulem pomocí Pythonu a knihovny pro rozpoznávání obrazu OpenCV hrát karetní hru Blackjack. Ukázka rozpoznávání karet na YouTube. Zdrojové kódy jsou k dispozici na GitHubu.

Ladislav Hagara | Komentářů: 0
14.10. 15:11 | IT novinky

Online obchod s počítačovými hrami a elektronickými knihami Humble Bundle byl koupen společností IGN. Dle oficiálních prohlášení by měl Humble Bundle dále fungovat stejně jako dosud.

Ladislav Hagara | Komentářů: 8
14.10. 06:00 | Zajímavý článek

Brendan Gregg již v roce 2008 upozornil (YouTube), že na pevné disky se nemá křičet, že jim to nedělá dobře. Plotny disku se mohou rozkmitat a tím se mohou prodloužit časy odezvy pevného disku. V září letošního roku proběhla v Buenos Aires konference věnovaná počítačové bezpečnosti ekoparty. Alfredo Ortega zde demonstroval (YouTube, pdf), že díky tomu lze pevný disk použít také jako nekvalitní mikrofon. Stačí přesně měřit časy odezvy

… více »
Ladislav Hagara | Komentářů: 8
13.10. 14:33 | Komunita

Společnost SUSE natočila a na YouTube zveřejnila dva nové videoklipy: 25 Years - SUSE Music Video (7 Years parody) a Linus Said - Music Parody (Momma Said).

Ladislav Hagara | Komentářů: 6
13.10. 12:55 | Zajímavý projekt

Autoři stránky Open Source Game Clones se snaží na jednom místě shromažďovat informace o open source klonech proprietárních počítačových her. Přidat další hry nebo návrhy na zlepšení lze na GitHubu. Na stránce Open Source Text Games jsou shromažďovány informace o open source textových hrách. Opět lze k vylepšení nebo doplnění stránky použít GitHub.

Ladislav Hagara | Komentářů: 1
Těžíte nějakou kryptoměnu?
 (6%)
 (2%)
 (15%)
 (76%)
Celkem 718 hlasů
 Komentářů: 24, poslední 27.9. 08:30
    Rozcestník

    Dotaz: Ati Mobility FireGL T2

    18.3.2004 11:00 anon123 | skóre: 35 | blog: ganomi
    Ati Mobility FireGL T2
    Přečteno: 224×
    Ahoj
    Mel bych dve otazecky na tuto grafickou kartu, kterou mam ve svem laptopu.
    1)
    kdyz uz mam naistalovany stary ovladac a chci instalovat novejsi, tak projedu instalaci toho noveho ovladace a tim je vse hotove, ze? Nebo musim udelat jeste neco jineho, aby tam nevznikl nejaky konflikt. (to byla ta snadnejsi)
    2)
    Druha otazka se tyka obrazu. Karta jede bez problemu, ale kdyz prechazim mezi terminali tty1 - tty8, hlavne kdyz vytvorim novou session pro gui, tak se obraz roztrepi a comp se sekne a nezbiva nic jineho nez restart. (roztrepi = jako kdyby jste na monitoru nastavili vyssi frekvenci nez je povolena). Ale ja mam frekvence nastavene spravne.
    Kdyz jsem nejel na ovladac od ati, ale jen na vesa frame buffer, tak jsem s tim nemel problemy.

    Jeste jedna podotazecka. Mam v runlevelu zapnuty frame buffer. Ten musi bezet, nebo ho muzu vypnout, kdyz jedu na pravych ovladacich od ati.

    Doufam, ze mi nekdo da radu, ktera je vzdy nad zlato. Predem velice dekuji. :-)

    Odpovědi

    18.3.2004 11:35 Petr Šobáň | skóre: 79 | blog: soban | Olomouc
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    1.) To nevím zaleží jak je to udělané co se přepisuje, nový modul do jádra, knihovny do X atd...

    2.) To by vypadalo že systém asi špatně detekuje RAM na grafické kartě a potom se snaží použít více. Takže skus do konfiguráku X ek zadat přímo kolik má karta na sobě RAM. A nebo se nedohodne ten ovladač s framebuferovým ovladačem v konzoli. Takže skusit vypnout FB. FB nemusí běžet záleží zda vám stačí normální konzole v textovém režimu.
    18.3.2004 15:33 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    ad 1) Tak stacilo jen naistalovat novy ovladac znova.

    ad 2) Po instalaci noveho ovlacace, je vse stejne. Otazka: Tim, ze vypnu FB tak mi nenajedou X ka? Ja je totiz pouzivam.

    Myslite ze muzu zadat prikaz videoram do XF86config-4? Tento konfiguracni soubor byl vytvoren konfiguracnim programem od Ati (fglrxconfig).

    tady prikladam jeho cast. Kdyby mi nekdo poradil, byl bych rad, protoze takhle to neni moc stabilni. Vlastne vubec. Diky.
    # **********************************************************************
    # Monitor section
    # **********************************************************************
    
    # Any number of monitor sections may be present
    
    Section "Monitor"
        Identifier  "Monitor0"
        HorizSync   30-95
        VertRefresh 30-62
        Option "DPMS"
    
    # === mode lines based on GTF ===
    # VGA @ 100Hz
    # Modeline "640x480@100" 43.163 640 680 744 848 480 481 484 509 +hsync +vsync
    # SVGA @ 100Hz
    # Modeline "800x600@100" 68.179 800 848 936 1072 600 601 604 636 +hsync +vsync
    # XVGA @ 100Hz
    # Modeline "1024x768@100" 113.309 1024 1096 1208 1392 768 769 772 814 +hsync +vsync
    # 1152x864 @ 60Hz
    # Modeline "1152x864@60" 81.642 1152 1216 1336 1520 864 865 868 895 +hsync +vsync
    # 1152x864 @ 85Hz
    # Modeline "1152x864@85" 119.651 1152 1224 1352 1552 864 865 868 907 +hsync +vsync
    # 1152x864 @ 100Hz
    # Modeline "1152x864@100" 143.472 1152 1232 1360 1568 864 865 868 915 +hsync +vsync
    # 1280x960 @ 75Hz
    # Modeline "1280x960@75" 129.859 1280 1368 1504 1728 960 961 964 1002 +hsync +vsync
    # 1280x960 @ 100Hz
    # Modeline "1280x960@100" 178.992 1280 1376 1520 1760 960 961 964 1017  +hsync +vsync
    # SXGA @ 100Hz
    # Modeline "1280x1024@100" 190.960 1280 1376 1520 1760 1024 1025 1028 1085 +hsync +vsync
    # SPEA GDM-1950 (60Hz,64kHz,110MHz,-,-): 1280x1024 @ V-freq: 60.00 Hz, H-freq: 63.73 KHz
    # Modeline "GDM-1950"  109.62  1280 1336 1472 1720  1024 1024 1026 1062 -hsync -vsync
    # 1600x1000 @ 60Hz
    # Modeline "1600x1000" 133.142 1600 1704 1872 2144 1000 1001 1004 1035 +hsync +vsync
    # 1600x1000 @ 75Hz
    # Modeline "1600x1000" 169.128 1600 1704 1880 2160 1000 1001 1004 1044 +hsync +vsync
    # 1600x1000 @ 85Hz
    # Modeline "1600x1000" 194.202 1600 1712 1888 2176 1000 1001 1004 1050 +hsync +vsync
    # 1600x1000 @ 100Hz
    # Modeline "1600x1000" 232.133 1600 1720 1896 2192 1000 1001 1004 1059 +hsync +vsync
    # 1600x1024 @ 60Hz
    # Modeline "1600x1024" 136.385 1600 1704 1872 2144 1024 1027 1030 1060 +hsync +vsync
    # 1600x1024 @ 75Hz
    # Modeline "1600x1024" 174.416 1600 1712 1888 2176 1024 1025 1028 1069 +hsync +vsync
    # 1600x1024 @ 76Hz
    # Modeline "1600x1024" 170.450 1600 1632 1792 2096 1024 1027 1030 1070 +hsync +vsync
    # 1600x1024 @ 85Hz
    # Modeline "1600x1024" 198.832 1600 1712 1888 2176 1024 1027 1030 1075 +hsync +vsync
    # 1920x1080 @ 60Hz
    # Modeline "1920x1080" 172.798 1920 2040 2248 2576 1080 1081 1084 1118 -hsync -vsync
    # 1920x1080 @ 75Hz
    # Modeline "1920x1080" 211.436 1920 2056 2264 2608 1080 1081 1084 1126 +hsync +vsync
    # 1920x1200 @ 60Hz
    # Modeline "1920x1200" 193.156 1920 2048 2256 2592 1200 1201 1203 1242 +hsync +vsync
    # 1920x1200 @ 75Hz
    # Modeline "1920x1200" 246.590 1920 2064 2272 2624 1200 1201 1203 1253 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 2048x1536 @ 60
    # Modeline "2048x1536" 266.952 2048 2200 2424 2800 1536 1537 1540 1589 +hsync +vsync
    # 1400x1050 @ 60Hz M9 Laptop mode
    # ModeLine "1400x1050" 122.000 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync
    # 1920x2400 @ 25Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@25" 124.620 1920 1928 1980 2048 2400 2401 2403 2434 +hsync +vsync
    # 1920x2400 @ 30Hz for IBM T221, VS VP2290 and compatible display devices
    # Modeline "1920x2400@30" 149.250 1920 1928 1982 2044 2400 2402 2404 2434 +hsync +vsync
    
    EndSection
    
    
    # **********************************************************************
    # Graphics device section
    # **********************************************************************
    
    # Any number of graphics device sections may be present
    
    # Standard VGA Device:
    
    Section "Device"
        Identifier  "Standard VGA"
        VendorName  "Unknown"
        BoardName   "Unknown"
    
    # The chipset line is optional in most cases.  It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    
    #    Chipset     "generic"
    
    # The Driver line must be present.  When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module.  Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    
        Driver      "vga"
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for.  When this line isn't present, a device
    # section can only match up with the primary video device.  For PCI
    # devices a line like the following could be used.  This line should not
    # normally be included unless there is more than one video device
    # installed.
    
    #    BusID       "PCI:0:10:0"
    
    #    VideoRam    256
    
    #    Clocks      25.2 28.3
    
    EndSection
    
    # === ATI device section ===
    
    Section "Device"
        Identifier                          "ATI Graphics Adapter"
        Driver                              "fglrx"
    # ### generic DRI settings ###
    # === disable PnP Monitor  ===
        #Option                              "NoDDC"
    # === disable/enable XAA/DRI ===
        Option "no_accel"                   "no"
        Option "no_dri"                     "no"
    # === misc DRI settings ===
        Option "mtrr"                       "off" # disable DRI mtrr mapper, \\
    driver has its own code for mtrr
    # ### FireGL DDX driver module specific settings ###
    # === Screen Management ===
        Option "DesktopSetup"               "0x00000100"
        Option "MonitorLayout"              "AUTO, NONE"
        Option "IgnoreEDID"                 "off"
        Option "HSync2"                     "unspecified"
        Option "VRefresh2"                  "unspecified"
        Option "ScreenOverlap"              "0"
    # === TV-out Management ===
        Option "NoTV"                       "no"
        Option "TVStandard"                 "PAL-B"
        Option "TVHSizeAdj"                 "0"
        Option "TVVSizeAdj"                 "0"     
        Option "TVHPosAdj"                  "0"
        Option "TVVPosAdj"                  "0"
        Option "TVHStartAdj"                "0"
        Option "TVColorAdj"                 "0"
        Option "GammaCorrectionI"           "0x00000000"
        Option "GammaCorrectionII"          "0x00000000"
    # === OpenGL specific profiles/settings ===
        Option "Capabilities"               "0x00000000"
    # === Video Overlay for the Xv extension ===
        Option "VideoOverlay"               "on"
    # === OpenGL Overlay ===
    # Note: When OpenGL Overlay is enabled, Video Overlay
    #       will be disabled automatically
        Option "OpenGLOverlay"              "off"
    # === Center Mode (Laptops only) ===
        Option "CenterMode"                 "off"
    # === Pseudo Color Visuals (8-bit visuals) ===
        Option "PseudoColorVisuals"         "off"
    # === QBS Management ===
        Option "Stereo"                     "off"
        Option "StereoSyncEnable"           "1"
    # === FSAA Management ===
        Option "FSAAEnable"                 "no"
        Option "FSAAScale"                  "1"
        Option "FSAADisableGamma"           "no"
        Option "FSAACustomizeMSPos"         "no"
        Option "FSAAMSPosX0"                "0.000000"
        Option "FSAAMSPosY0"                "0.000000"
        Option "FSAAMSPosX1"                "0.000000"
        Option "FSAAMSPosY1"                "0.000000"
        Option "FSAAMSPosX2"                "0.000000"
        Option "FSAAMSPosY2"                "0.000000"
        Option "FSAAMSPosX3"                "0.000000"
        Option "FSAAMSPosY3"                "0.000000"
        Option "FSAAMSPosX4"                "0.000000"
        Option "FSAAMSPosY4"                "0.000000"
        Option "FSAAMSPosX5"                "0.000000"
        Option "FSAAMSPosY5"                "0.000000"
    # === Misc Options ===
        Option "UseFastTLS"                 "0"
        Option "BlockSignalsOnLock"         "on"
        Option "UseInternalAGPGART"         "yes"
        Option "ForceGenericCPU"            "no"
        BusID "PCI:1:0:0"    # vendor=1002, device=4e54
        Screen 0
    EndSection
    
    # **********************************************************************
    # Screen sections
    # **********************************************************************
    
    # Any number of screen sections may be present.  Each describes
    # the configuration of a single screen.  A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    Section "Screen"
        Identifier  "Screen0"
        Device      "ATI Graphics Adapter"
        Monitor     "Monitor0"
        DefaultDepth 24
        #Option "backingstore"
    
        Subsection "Display"
            Depth       24
            Modes       "1600x1200" "1400x1050" "1280x1024" "1024x768" "800x600"
            ViewPort    0 0  # initial origin if mode is smaller than desktop
    #        Virtual     1280 1024
        EndSubsection
    EndSection
    
    # **********************************************************************
    # ServerLayout sections.
    # **********************************************************************
    
    # Any number of ServerLayout sections may be present.  Each describes
    # the way multiple screens are organised.  A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option.  In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    
    Section "ServerLayout"
    
    # The Identifier line must be present
        Identifier  "Server Layout"
    
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens.  The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen.
    
        Screen "Screen0"
    
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used.  Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    
        InputDevice "Mouse1" "CorePointer"
        InputDevice "Mouse2"
        InputDevice "Keyboard1" "CoreKeyboard"
    
    EndSection
    
    ### EOF ###
    
    19.3.2004 05:07 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Tak jestli se tedy nikdo nenajde s radou, tak vas pozadam o nejaky link na Ati problematiku v Linuxu.

    Diky
    19.3.2004 07:37 Hovadko
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    No a kdyz tam napises
    VideoRam    Velikost_ty_tvy_Ramky
    tak se neco zmeni?

    Ja mam v notasu NVidii a at tam dam nejakej option pro ram nebo ne, tak se nic nezmeni (nepamatuju si presne nazev toho optionu pro nastaveni velikosti video RAM - nesedim u linuxu :-( ...) ...
    19.3.2004 10:02 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    No kdyz tam zadam
    VideoRam   128
    
    tak se Xka ani nerozjednou. Musel jsem to zakomentovat.

    Jeste jsem se chtel zeptat, v jakych souborech bych mel hledat hlaseni o chybach.

    Diky
    19.3.2004 18:24 Vlastimil Ott | skóre: 66 | blog: Plastique | Opava
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    To se ani nedivím, se 128 kB...:-D Velikost se udává v kilobajtech. Log: /var/log/XFree.0.log nebo podobný název.

    --vo
    Práce: Liberix, o.p.s. | Blog: OpensourceBlog.cz | Online kurz Zlatý WordPress
    20.3.2004 16:38 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Samozrejme 131072k :-)
    19.3.2004 16:04 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Tak jsem v koncich pratele. Docela me to mrzi, protoze jsem si myslel, ze kdyz si kupuji tak dobrou kartu, navic jeste s ovladacema pro linux, tak to bude fachat jako hodinky. Ale nefacha :-(

    No kdyby snad nekdo zkusenejsi napsal par hintu, kam se kouknout, co nastudovat, co pozorovat - neco z ceho bych mohl vyvodit zaver, bylo by to hezke. Diky
    19.3.2004 16:39 Hovadko
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Bohuzel nemam zkusenosti s kartama od ATI, takze moc nepomuzu, ale co se tyce logu, tak ty hledej ve /var/log ... Tam bys mel najit vsechny logy systemu - od X serveru by se ten log mel jmenovat /var/log/XFree86.log nebo tak nejak (je jich tam malo, takze se muzes mrknout do vsech :-D) ... Mozna bys mohl neco najit ve /var/log/messages ... A kdyz nabiha system, tak ti to nehlasi nic podezrelyho? Hlasky zobrazujici se pri startu systemu dostanes prikazem
     dmesg > /tmp/cokoliv
    
    , kde /tmp/cokoliv je jmeno souboru, do kteryho se presmeruje veskery vypis produkovany prikazem dmesg a ty si ho pak v klidu muzes precist ...
    19.3.2004 17:28 Hovadko
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Tak jeste neco ... V souboru /etc/X11/XF86Config davam do sekce Monitor
    Option   "DPMS"
    Option   "NoDDC"  "1"
    A do sekce Graphics device pridavam ke graficke karte
    Option   "NoDDC"  "1"
    Option   "IgnoreEDID"  "1"
    Option   "GenerateRTList"  "0"
    Option   "OverridePolarity"  "1"
    Nevim sice co vsechno tyhle volby znamenaji, ale zadnej error mi to nepise a prepinani z X do konzole a zpet mi funguje bez problemu ...
    21.3.2004 07:49 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    Take jsem zkousel najit poradnej manual na ty vyrazy, ale nic jsem nenasel. Jinak zkusim tyto kombinace a dam vedet.

    Jinak jsem chtel upresnit, ze mi to nedela az tak velky problem pri prechodu z konzole (hlavne kdyz ze pri bootu zada vga=normal, pak neni problem), ale v kazdem ze vsech pripadu mi to zatuhne, kdyz v Xkach dam novou session (na tty8), ta se vytvori, naloguju, a pak kdyz chci prejit do tty7 (odkud jsem prisel). Prepne to do tty7, tam je obraz rozstepeny a uz se neda nic delat.

    Jeste to chci vse vyzkouset pri nizsim rozliseni. Mam to vse na 1600x1200.

    Ale i tak, kazda rada dobra. Rad bych to zprovoznil, aby nebyli zadne problemy.
    19.3.2004 19:20 Michal Čihař | skóre: 61 | blog: Bláboly | Praha
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    A ovladač co je součástí Xek s tou kartou nefunguje?
    20.3.2004 16:41 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Ati Mobility FireGL T2
    tak nevim, ale ovladac pro tuto kartu myslim v Xkach neni.
    1.4.2004 19:15 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    Tak jsem tu zpatky. Po dlouhem badani a zkouseni je vse stejne. Ale nasel jsem v /var/log/messages toto.

    Je to dost dlouhe, tak se predem omlouvam, ale je to potreba. Abych to trosku popsal, tak je to vypis po nabootovani (zacina od toho duleziteho), pak se prihlasuji do Xek, pak volim z menu dalsi session (nova konzole tty8), pak se chci vratit zpatky na tty7 ale to je konec. Pak uz nic nevim a musim vypnout pocitac natvrdo.(Zvyraznena cast oznacuje to hlavni, kde se objevuje chyba, po ni zacina novy start pocitace po vypnuti, takze vse od znova.)

    Moc prosim, aby se nekdo na to kouknul a poradil nebo alespon naznacil cestu. Moc predem diky.
    Apr  2 02:41:33 linux kernel: isapnp: No Plug & Play device found
    Apr  2 02:41:33 linux kernel: parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
    Apr  2 02:41:34 linux kernel: lp0: using parport0 (polling).
    Apr  2 02:41:34 linux kernel: usb.c: registered new driver serial
    Apr  2 02:41:34 linux kernel: usbserial.c: USB Serial support registered for Generic
    Apr  2 02:41:34 linux kernel: usbserial.c: USB Serial Driver core v1.4
    Apr  2 02:41:34 linux kernel: usb.c: registered new driver hiddev
    Apr  2 02:41:34 linux kernel: usb.c: registered new driver hid
    Apr  2 02:41:34 linux kernel: usb-uhci.c: interrupt, status 2, frame# 1350
    Apr  2 02:41:39 linux kernel: usb_control/bulk_msg: timeout
    Apr  2 02:41:39 linux insmod: Using /lib/modules/2.4.21-199-default/kernel/drivers/usb/hid.o
    Apr  2 02:41:39 linux insmod: Symbol version prefix ''
    Apr  2 02:41:39 linux kernel: input: USB HID v1.00 Mouse [04b3:3107] on usb3:2.0
    Apr  2 02:41:39 linux kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik 
    Apr  2 02:41:39 linux kernel: hid-core.c: USB HID support drivers
    Apr  2 02:41:41 linux modprobe: modprobe: Can't locate module char-major-226
    Apr  2 02:41:41 linux last message repeated 3 times
    Apr  2 02:41:42 linux kernel: [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
    Apr  2 02:41:42 linux kernel: [fglrx] module loaded - fglrx 3.7.6 [Mar  5 2004] on minor 0
    Apr  2 02:41:42 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
    Apr  2 02:41:42 linux kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
    Apr  2 02:41:42 linux kernel: Fire GL built-in AGP-support
    Apr  2 02:41:42 linux kernel: Based on agpgart interface v0.99 (c) Jeff Hartmann
    Apr  2 02:41:42 linux kernel: agpgart: Maximum main memory to use for agp memory: 439M
    Apr  2 02:41:42 linux kernel: agpgart: Detected an Intel 855PM Chipset, no integrated grapics found.
    Apr  2 02:41:42 linux kernel: agpgart: Detected Intel i855PM chipset
    Apr  2 02:41:42 linux kernel: agpgart: AGP aperture is 256M @ 0xd0000000
    Apr  2 02:41:42 linux kernel: Power management callback for AGP chipset installed
    Apr  2 02:41:42 linux kernel: [fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
    Apr  2 02:41:42 linux kernel: AGP: Found 2 AGPv2 devices
    Apr  2 02:41:42 linux kernel: AGP: Doing enable for AGPv2
    Apr  2 02:41:42 linux kernel: [fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
    Apr  2 02:41:42 linux kernel: [fglrx] free  AGP = 252440576
    Apr  2 02:41:42 linux kernel: [fglrx] max   AGP = 252440576
    Apr  2 02:41:42 linux kernel: [fglrx] free  LFB = 108978176
    Apr  2 02:41:42 linux kernel: [fglrx] max   LFB = 108978176
    Apr  2 02:41:42 linux kernel: [fglrx] free  Inv = 0
    Apr  2 02:41:42 linux kernel: [fglrx] max   Inv = 0
    Apr  2 02:41:42 linux kernel: [fglrx] total Inv = 0
    Apr  2 02:41:42 linux kernel: [fglrx] total TIM = 0
    Apr  2 02:41:42 linux kernel: [fglrx] total FB  = 0
    Apr  2 02:41:42 linux kernel: [fglrx] total AGP = 65536
    Apr  2 02:44:41 linux kdm[2518]: pam_unix2: session started for user root, service xdm
    Apr  2 02:44:41 linux resmgr[1443]: accepted connection from user root
    Apr  2 02:44:41 linux resmgr[1443]: disconnect from root
    Apr  2 02:45:41 linux kernel: [fglrx:firegl_umm_init] *ERROR* UMM area already initialized!
    Apr  2 02:45:41 linux kernel: [fglrx:firegl_unlock] *ERROR* Process 2730 using kernel context 0
    Apr  2 02:46:41 linux kernel: [fglrx:firegl_lock_free] *ERROR* lock was not held by 1! (*lock=0x00000000)
    Apr  2 02:46:41 linux kernel: [fglrx:firegl_unlock] *ERROR* firegl_lock_free failed!
    Apr  2 02:46:41 linux kernel: Unable to handle kernel paging request at virtual address 7a6de09c
    Apr  2 02:46:41 linux kernel:  printing eip:
    Apr  2 02:46:41 linux kernel: c5853d03
    Apr  2 02:46:41 linux kernel: *pde = 00000000
    Apr  2 02:46:41 linux kernel: Oops: 0002 2.4.21-199-default #1 Fri Mar 12 08:27:41 UTC 2004
    Apr  2 02:46:41 linux kernel: CPU:    0
    Apr  2 02:46:41 linux kernel: EIP:    0010:[key:sysctl_ipsec4_tos_R7213d7a3+54085107/169696365]    Tainted: P
    Apr  2 02:46:41 linux kernel: EIP:    0010:[]    Tainted: P
    Apr  2 02:46:41 linux kernel: EFLAGS: 00213286
    Apr  2 02:46:41 linux kernel: eax: 7a6de09c   ebx: d7261014   ecx: d7261014   edx: e355c027
    Apr  2 02:46:41 linux kernel: esi: d7261014   edi: e355c02f   ebp: c586ac04   esp: c2ca5ec0
    Apr  2 02:46:41 linux kernel: ds: 0018   es: 0018   ss: 0018
    Apr  2 02:46:41 linux kernel: Process X (pid: 2517, stackpage=c2ca5000)
    Apr  2 02:46:41 linux kernel: Stack: c586ac04 00000004 d7261000 c586a740 00000000 c586a960 00000001 c584dc1d
    Apr  2 02:46:41 linux kernel:        c586ac04 00000001 00000000 c584e135 c1730aa0 c45f7380 c586a960 c5841dd7
    Apr  2 02:46:41 linux kernel:        c586a788 c658a000 00000000 c658a000 c45f7380 c586a960 00000001 c584df56
    Apr  2 02:46:41 linux kernel: Call Trace:         [key:sysctl_ipsec4_tos_R7213d7a3+54179060/169602412] (12) [key:sysct
    l_ipsec4_tos_R7213d7a3+54177840/169603632] (08) [key:sysctl_ipsec4_tos_R7213d7a3+54178384/169603088] (08)
    Apr  2 02:46:41 linux kernel: Call Trace:         [] (12) [] (08) [] (08)
    Apr  2 02:46:41 linux kernel:   [key:sysctl_ipsec4_tos_R7213d7a3+54060301/169721171] (04) [key:sysctl_ipsec4_tos_R7213
    d7a3+54179060/169602412] (12) [key:sysctl_ipsec4_tos_R7213d7a3+54061605/169719867] (12) [key:sysctl_ipsec4_tos_R7213d7
    a3+54178384/169603088] (04)
    Apr  2 02:46:41 linux kernel:   [] (04) [] (12) [] (12) [] (04)
    Apr  2 02:46:41 linux kernel:   [key:sysctl_ipsec4_tos_R7213d7a3+54011591/169769881] (04) [key:sysctl_ipsec4_tos_R7213
    d7a3+54177912/169603560] (20) [key:sysctl_ipsec4_tos_R7213d7a3+54178384/169603088] (08) [key:sysctl_ipsec4_tos_R7213d7
    a3+54061126/169720346] (04)
    Apr  2 02:46:41 linux kernel:   [] (04) [] (20) [] (08) [] (04)
    Apr  2 02:46:41 linux kernel:   [key:sysctl_ipsec4_tos_R7213d7a3+54178384/169603088] (28) [key:sysctl_ipsec4_tos_R7213
    d7a3+54060976/169720496] (04) [key:sysctl_ipsec4_tos_R7213d7a3+54175816/169605656] (12) [key:sysctl_ipsec4_tos_R7213d7
    a3+54052077/169729395] (40)
    Apr  2 02:46:41 linux kernel:   [] (28) [] (04) [] (12) [] (40)
    Apr  2 02:46:41 linux kernel:   [run_all_timers+23/32] (04) [key:sysctl_ipsec4_tos_R7213d7a3+54178432/169603040] (20)
    [sys_ioctl+470/618] (24) [do_schedule+372/768] (28)
    Apr  2 02:46:41 linux kernel:   [] (04) [] (20) [] (24) [] (28)
    Apr  2 02:46:41 linux kdm[2460]: Server for display :0 terminated unexpectedly
    Apr  2 02:46:41 linux kernel:   [system_call+51/64] (60)
    Apr  2 02:46:41 linux kernel:   [] (60)
    Apr  2 02:46:41 linux kernel: Modules: [(fglrx::)]
    Apr  2 02:46:41 linux kernel: Code: c7 00 0b 0d 00 00 89 c2 83 c2 10 c7 40 04 0f 00 00 00 c7 40
    Apr  2 02:46:41 linux kdm[2518]: pam_unix2: session finished for user root, service xdm
    Apr  2 02:46:41 linux resmgr[1443]: accepted connection from user root
    Apr  2 02:46:41 linux resmgr[1443]: disconnect from root
    Apr  2 02:46:43 linux kernel:  <3>[fglrx:firegl_umm_init] *ERROR* UMM area already initialized!
    Apr  2 02:46:43 linux kernel: [fglrx:firegl_unlock] *ERROR* Process 2760 using kernel context 0
    Apr  2 02:46:44 linux kernel: swap_free: Bad swap file entry e355b026
    Apr  2 02:47:13 linux su: (to root) root on none
    Apr  2 02:47:13 linux su: pam_unix2: session started for user root, service su
    Apr  2 02:47:13 linux su: pam_unix2: session finished for user root, service su
    Apr  2 02:49:27 linux syslogd 1.4.1: restart.
    Apr  2 02:49:28 linux /etc/hotplug/usb.rc[1261]: loaded HCD: ehci-hcd
    Apr  2 02:49:28 linux /etc/hotplug/usb.rc[1261]: loaded HCD: usb-uhci
    Apr  2 02:49:28 linux /etc/hotplug/usb.rc[1261]: loaded HCD: ehci-hcd
    Apr  2 02:49:32 linux kernel: klogd 1.4.1, log source = /proc/kmsg started.
    Apr  2 02:49:32 linux kernel: Inspecting /boot/System.map-2.4.21-199-default
    Apr  2 02:49:32 linux kernel: Loaded 21338 symbols from /boot/System.map-2.4.21-199-default.
    Apr  2 02:49:32 linux kernel: Symbols match kernel version 2.4.21.
    Apr  2 02:49:32 linux kernel: Loaded 769 symbols from 41 modules.
    Apr  2 02:49:32 linux kernel: IPsec Security Association Database (SADB): initialized.
    Apr  2 02:49:32 linux kernel: IPsec Security Policy Database (SPD): initialized.
    Apr  2 02:49:32 linux kernel: IPsec PF_KEY V2: initialized
    Apr  2 02:49:32 linux kernel: IPv6 v0.8 (usagi-cvs/IPsec6 based StS) for NET4.0
    Apr  2 02:49:32 linux kernel: IPv6 over IPv4 tunneling driver
    Apr  2 02:49:32 linux kernel: ip6_tables: (C) 2000-2002 Netfilter core team
    Apr  2 02:49:32 linux kernel: ip_tables: (C) 2000-2002 Netfilter core team
    Apr  2 02:49:32 linux kernel: ip_conntrack version 2.1 (4091 buckets, 32728 max) - 304 bytes per conntrack
    Apr  2 02:49:32 linux kernel: Intel(R) PRO/1000 Network Driver - version 5.2.16
    Apr  2 02:49:32 linux kernel: Copyright (c) 1999-2003 Intel Corporation.
    Apr  2 02:49:32 linux kernel: eth0: Intel(R) PRO/1000 Network Connection
    Apr  2 02:49:32 linux kernel: e1000: eth0 NIC Link is Up 10 Mbps Half Duplex
    Apr  2 02:49:32 linux kernel: eth0: no IPv6 routers present
    Apr  2 02:49:32 linux kernel: raw1394: /dev/raw1394 device initialized
    Apr  2 02:49:32 linux kernel: usb.c: registered new driver usbdevfs
    Apr  2 02:49:32 linux kernel: usb.c: registered new driver hub
    Apr  2 02:49:32 linux kernel: PCI: Setting latency timer of device 00:1d.7 to 64
    Apr  2 02:49:32 linux kernel: ehci_hcd 00:1d.7: Intel Corp. 82801DB USB2 Enhanced Host Controller
    Apr  2 02:49:32 linux kernel: ehci_hcd 00:1d.7: irq 11, pci mem e499b000
    Apr  2 02:49:32 linux kernel: usb.c: new USB bus registered, assigned bus number 1
    Apr  2 02:49:32 linux kernel: ehci_hcd 00:1d.7: enabled 64bit PCI DMA
    Apr  2 02:49:32 linux kernel: PCI: 00:1d.7 PCI cache line size set incorrectly (0 bytes) by BIOS/FW.
    Apr  2 02:49:32 linux kernel: PCI: 00:1d.7 PCI cache line size corrected to 32.
    Apr  2 02:49:32 linux kernel: ehci_hcd 00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2003-Jun-19/2.4
    Apr  2 02:49:32 linux kernel: hub.c: USB hub found
    Apr  2 02:49:32 linux kernel: hub.c: 6 ports detected
    Apr  2 02:49:32 linux kernel: usb-uhci.c: $Revision: 1.275 $ time 08:56:11 Mar 12 2004
    Apr  2 02:49:32 linux kernel: usb-uhci.c: High bandwidth mode enabled
    Apr  2 02:49:32 linux kernel: PCI: Setting latency timer of device 00:1d.0 to 64
    Apr  2 02:49:32 linux kernel: usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 11
    Apr  2 02:49:32 linux kernel: usb-uhci.c: Detected 2 ports
    Apr  2 02:49:32 linux kernel: usb.c: new USB bus registered, assigned bus number 2
    Apr  2 02:49:32 linux kernel: hub.c: USB hub found
    Apr  2 02:49:32 linux kernel: hub.c: 2 ports detected
    Apr  2 02:49:32 linux kernel: PCI: Setting latency timer of device 00:1d.1 to 64
    Apr  2 02:49:32 linux kernel: usb-uhci.c: USB UHCI at I/O 0x1820, IRQ 11
    Apr  2 02:49:32 linux kernel: usb-uhci.c: Detected 2 ports
    Apr  2 02:49:32 linux kernel: usb.c: new USB bus registered, assigned bus number 3
    Apr  2 02:49:32 linux kernel: hub.c: USB hub found
    Apr  2 02:49:32 linux kernel: hub.c: 2 ports detected
    Apr  2 02:49:32 linux kernel: PCI: Setting latency timer of device 00:1d.2 to 64
    Apr  2 02:49:32 linux kernel: usb-uhci.c: USB UHCI at I/O 0x1840, IRQ 11
    Apr  2 02:49:32 linux kernel: usb-uhci.c: Detected 2 ports
    Apr  2 02:49:32 linux kernel: usb.c: new USB bus registered, assigned bus number 4
    Apr  2 02:49:32 linux kernel: hub.c: USB hub found
    Apr  2 02:49:32 linux kernel: hub.c: 2 ports detected
    Apr  2 02:49:32 linux kernel: usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
    Apr  2 02:49:32 linux kernel: uhci.c: USB Universal Host Controller Interface driver v1.1
    Apr  2 02:49:32 linux kernel: mice: PS/2 mouse device common for all mice
    Apr  2 02:49:32 linux kernel: hub.c: new USB device 00:1d.1-2, assigned address 2
    Apr  2 02:49:32 linux kernel: usb.c: USB device 2 (vend/prod 0x4b3/0x3107) is not claimed by any active driver.
    Apr  2 02:49:32 linux kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    Apr  2 02:49:32 linux kernel: sr0: scsi3-mmc drive: 31x/31x writer dvd-ram cd/rw xa/form2 cdda tray
    Apr  2 02:49:32 linux kernel: Uniform CD-ROM driver Revision: 3.12
    Apr  2 02:49:36 linux rcpcmcia: /sbin/insmod /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/pcmcia_core.o
    Apr  2 02:49:36 linux kernel: Linux Kernel Card Services 3.1.22
    Apr  2 02:49:36 linux kernel:   options:  [pci] [cardbus] [pm]
    Apr  2 02:49:36 linux rcpcmcia: Using /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/pcmcia_core.o
    Apr  2 02:49:36 linux rcpcmcia: Symbol version prefix ''
    Apr  2 02:49:36 linux rcpcmcia: /sbin/insmod /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/yenta_socket.o
    Apr  2 02:49:36 linux kernel: Yenta IRQ list 0098, PCI irq11
    Apr  2 02:49:36 linux kernel: Socket status: 30000086
    Apr  2 02:49:36 linux kernel: Yenta IRQ list 0098, PCI irq5
    Apr  2 02:49:36 linux kernel: Socket status: 30000086
    Apr  2 02:49:36 linux rcpcmcia: Using /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/yenta_socket.o
    Apr  2 02:49:36 linux rcpcmcia: Symbol version prefix ''
    Apr  2 02:49:36 linux rcpcmcia: /sbin/insmod /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/ds.o
    Apr  2 02:49:36 linux rcpcmcia: Using /lib/modules/2.4.21-199-default/kernel/drivers/pcmcia/ds.o
    Apr  2 02:49:36 linux rcpcmcia: Symbol version prefix ''
    Apr  2 02:49:36 linux cardmgr[1535]: modpath = /lib/modules/2.4.21-199-default/
    Apr  2 02:49:36 linux cardmgr[1535]: modsubdir = pcmcia
    Apr  2 02:49:36 linux cardmgr[1535]: watching 2 sockets
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x0c00-0x0cff: clean.
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x0820-0x08ff: clean.
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x0800-0x080f: clean.
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x03e0-0x04ff: excluding 0x4d0-0x4d7
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x0100-0x03af: clean.
    Apr  2 02:49:36 linux kernel: cs: IO port probe 0x0a00-0x0aff: clean.
    Apr  2 02:49:36 linux cardmgr[1537]: starting, version is 3.2.4
    Apr  2 02:49:38 linux SuSEfirewall2: Firewall rules successfully set in QUICKMODE for device(s) " ppp+"
    Apr  2 02:49:38 linux SuSEfirewall2: Firewall rules successfully set in QUICKMODE for device(s) " ppp+"
    Apr  2 02:49:38 linux kernel: ACPI: AC Adapter [AC] (on-line)
    Apr  2 02:49:39 linux kernel: ACPI: Battery Slot [BAT0] (battery present)
    Apr  2 02:49:39 linux kernel: ACPI: Battery Slot [BAT1] (battery absent)
    Apr  2 02:49:39 linux kernel: ACPI: Power Button (FF) [PWRF]
    Apr  2 02:49:39 linux kernel: ACPI: Lid Switch [LID]
    Apr  2 02:49:39 linux kernel: ACPI: Sleep Button (CM) [SLPB]
    Apr  2 02:49:39 linux kernel: ACPI: Processor [CPU] (supports C1 C2 C3, 6 performance states, 8 throttling states)
    Apr  2 02:49:39 linux kernel: ACPI: Thermal Zone [THM0] (50 C)
    Apr  2 02:49:39 linux kernel: PCI: Setting latency timer of device 00:1f.5 to 64
    Apr  2 02:49:39 linux smpppd[1923]: smpppd version 1.06 started
    Apr  2 02:49:39 linux sshd[1951]: Server listening on :: port 22.
    Apr  2 02:49:40 linux kernel: intel8x0: clocking to 48000
    Apr  2 02:49:40 linux kernel: speedstep-centrino: found "Intel(R) Pentium(R) M processor 1700MHz": max frequ                 000kHz
    Apr  2 02:49:41 linux kernel: i8253 count too high! resetting..
    Apr  2 02:49:42 linux /usr/sbin/cron[2384]: (CRON) STARTUP (fork ok)
    Apr  2 02:49:42 linux kernel: parport0: PC-style at 0x3bc [PCSPP,TRISTATE]
    Apr  2 02:49:42 linux kernel: lp0: using parport0 (polling).
    Apr  2 02:49:43 linux kernel: isapnp: Scanning for PnP cards...
    Apr  2 02:49:43 linux kernel: isapnp: No Plug & Play device found
    Apr  2 02:49:43 linux kernel: usb.c: registered new driver serial
    Apr  2 02:49:43 linux kernel: usbserial.c: USB Serial support registered for Generic
    Apr  2 02:49:43 linux kernel: usbserial.c: USB Serial Driver core v1.4
    Apr  2 02:49:44 linux kernel: usb.c: registered new driver hiddev
    Apr  2 02:49:44 linux kernel: usb.c: registered new driver hid
    Apr  2 02:49:44 linux kernel: usb-uhci.c: interrupt, status 2, frame# 1408
    Apr  2 02:49:44 linux kernel: input: USB HID v1.00 Mouse [04b3:3107] on usb3:2.0
    Apr  2 02:49:44 linux kernel: hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik 
    Apr  2 02:49:44 linux kernel: hid-core.c: USB HID support drivers
    Apr  2 02:49:44 linux insmod: Using /lib/modules/2.4.21-199-default/kernel/drivers/usb/hid.o
    Apr  2 02:49:44 linux insmod: Symbol version prefix ''
    Apr  2 02:49:46 linux modprobe: modprobe: Can't locate module char-major-226
    Apr  2 02:49:46 linux last message repeated 3 times
    Apr  2 02:49:46 linux kernel: [fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
    Apr  2 02:49:46 linux kernel: [fglrx] module loaded - fglrx 3.7.6 [Mar  5 2004] on minor 0
    Apr  2 02:49:46 linux kernel: mtrr: 0xe0000000,0x8000000 overlaps existing 0xe0000000,0x4000000
    Apr  2 02:49:46 linux kernel: [fglrx:firegl_addmap] *ERROR* mtrr allocation failed (-22)
    Apr  2 02:49:46 linux kernel: Fire GL built-in AGP-support
    Apr  2 02:49:46 linux kernel: Based on agpgart interface v0.99 (c) Jeff Hartmann
    Apr  2 02:49:46 linux kernel: agpgart: Maximum main memory to use for agp memory: 439M
    Apr  2 02:49:46 linux kernel: agpgart: Detected an Intel 855PM Chipset, no integrated grapics found.
    Apr  2 02:49:46 linux kernel: agpgart: Detected Intel i855PM chipset
    Apr  2 02:49:46 linux kernel: agpgart: AGP aperture is 256M @ 0xd0000000
    Apr  2 02:49:46 linux kernel: Power management callback for AGP chipset installed
    Apr  2 02:49:46 linux kernel: [fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
    Apr  2 02:49:46 linux kernel: AGP: Found 2 AGPv2 devices
    Apr  2 02:49:46 linux kernel: AGP: Doing enable for AGPv2
    Apr  2 02:49:46 linux kernel: [fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
    Apr  2 02:49:46 linux kernel: [fglrx] free  AGP = 252440576
    Apr  2 02:49:46 linux kernel: [fglrx] max   AGP = 252440576
    Apr  2 02:49:46 linux kernel: [fglrx] free  LFB = 108978176
    Apr  2 02:49:46 linux kernel: [fglrx] max   LFB = 108978176
    Apr  2 02:49:46 linux kernel: [fglrx] free  Inv = 0
    Apr  2 02:49:46 linux kernel: [fglrx] max   Inv = 0
    Apr  2 02:49:46 linux kernel: [fglrx] total Inv = 0
    Apr  2 02:49:46 linux kernel: [fglrx] total TIM = 0
    Apr  2 02:49:46 linux kernel: [fglrx] total FB  = 0
    Apr  2 02:49:46 linux kernel: [fglrx] total AGP = 65536
    Apr  2 02:50:14 linux login[2601]: FAILED LOGIN 1 FROM /dev/tty6 FOR root, Authentication failure
                
    4.4.2004 08:13 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    tak se nikdo nenajde?
    4.4.2004 09:36 jm
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    A uz jste zkusil vypnout ten framebuffer v konzoli?
    4.4.2004 11:07 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    No moc tomu nerozumin, ale myslim, ze fb mi nebezi. Neni definovany v XF86Config, take jsem vypnul nastartovani fbset pri najezdu pocitace. Ovladace od ati jedou.
    4.4.2004 14:05 jm
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    Hmm, XF86 jsem zrovna nemyslel... Mate na te obrazovce v konzoli najakou grafiku nebo jenom ciste text?
    5.4.2004 05:47 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    Pouzivam graficke rozhrani X... na tty7. Tty1-6 jsou textova, ale tty1 je se splashem. Nejvetsi problem nastava kdyz na tty7 v Xkach vytvorim novou session na tty8. Pak, kdyz se chci vratit (CTRL+ALT+F7) na tty7 tak se to sekne. Kdyz jsem jel jen na ovladace Vesa FB, tak to nedelalo. Zaclo to az ovladacema od Ati, ktere jsem myslim naistaloval spravne.
    5.4.2004 08:35 jm
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    Zadny splash, nic, ten framebuffer dejte kompletne cely pryc.
    6.4.2004 11:08 anon123 | skóre: 35 | blog: ganomi
    Rozbalit Rozbalit vše Re: Ati Mobility FireGL T2
    To jsem uz zkousel, ale problem zustava. Jak rikam, problem neni az tak u prepinani Xek a techtovych konzoli, ale prepinani mezi dvema grafickymi konzolemi.

    Založit nové vláknoNahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.