Na YouTube je k dispozici videozáznam z včerejšího Czech Open Source Policy Forum 2024.
Fossil (Wikipedie) byl vydán ve verzi 2.24. Jedná se o distribuovaný systém správy verzí propojený se správou chyb, wiki stránek a blogů s integrovaným webovým rozhraním. Vše běží z jednoho jediného spustitelného souboru a uloženo je v SQLite databázi.
Byla vydána nová stabilní verze 6.7 webového prohlížeče Vivaldi (Wikipedie). Postavena je na Chromiu 124. Přehled novinek i s náhledy v příspěvku na blogu. Vypíchnout lze Spořič paměti (Memory Saver) automaticky hibernující karty, které nebyly nějakou dobu používány nebo vylepšené Odběry (Feed Reader).
OpenJS Foundation, oficiální projekt konsorcia Linux Foundation, oznámila vydání verze 22 otevřeného multiplatformního prostředí pro vývoj a běh síťových aplikací napsaných v JavaScriptu Node.js (Wikipedie). V říjnu se verze 22 stane novou aktivní LTS verzí. Podpora je plánována do dubna 2027.
Byla vydána verze 8.2 open source virtualizační platformy Proxmox VE (Proxmox Virtual Environment, Wikipedie) založené na Debianu. Přehled novinek v poznámkách k vydání a v informačním videu. Zdůrazněn je průvodce migrací hostů z VMware ESXi do Proxmoxu.
R (Wikipedie), programovací jazyk a prostředí určené pro statistickou analýzu dat a jejich grafické zobrazení, bylo vydáno ve verzi 4.4.0. Její kódové jméno je Puppy Cup.
IBM kupuje společnost HashiCorp (Terraform, Packer, Vault, Boundary, Consul, Nomad, Waypoint, Vagrant, …) za 6,4 miliardy dolarů, tj. 35 dolarů za akcii.
Byl vydán TrueNAS SCALE 24.04 “Dragonfish”. Přehled novinek této open source storage platformy postavené na Debianu v poznámkách k vydání.
Oznámeny byly nové Raspberry Pi Compute Module 4S. Vedle původní 1 GB varianty jsou nově k dispozici také varianty s 2 GB, 4 GB a 8 GB paměti. Compute Modules 4S mají na rozdíl od Compute Module 4 tvar a velikost Compute Module 3+ a předchozích. Lze tak provést snadný upgrade.
Po roce vývoje od vydání verze 1.24.0 byla vydána nová stabilní verze 1.26.0 webového serveru a reverzní proxy nginx (Wikipedie). Nová verze přináší řadu novinek. Podrobný přehled v souboru CHANGES-1.26.
#include < stdio.h > #include < stdlib.h > #define JOISTICK "/dev/js0" unsigned char buffer[33]; void cti_joi(void) { FILE *joi; if ((joi=fopen(JOISTICK,"rb"))==NULL) { fprintf(stderr,"Nelze otevrit soubor "JOISTICK" \n\n"); _exit(1); } fread(buffer,32,1,joi); fclose(joi); return; } int main(void) { printf("\n\n Program pro testovani joystiku-tlacitek v1.0 (c) 2000 Soban Petr S&S\n\n"); cti_joi(); printf("Tlacitka %X %X %X %X ", buffer[4],buffer[12],buffer[20],buffer[28]); return 0; }Je možné že pokud používáte pouze vstupy tlačítek tak musíte na vstupy kde jsou potenciometry připojit odpory tak jako by tam ty potenciometry byly. Dále u jednoho game portu jsem nemohl přečíst vstupy ať jsem dělal co chtěl (z mého zařízení) kdešto normální tlačítka tam fungovala, asi ten výstup toho tranzistoru nestačil, musel by se asi upravit vystupní obvod toho zařízení.
/* * jstest.c Version 1.2 * * Copyright (c) 1996-1999 Vojtech Pavlik * * Sponsored by SuSE */ /* * This program can be used to test all the features of the Linux * joystick API, including non-blocking and select() access, as * well as version 0.x compatibility mode. It is also intended to * serve as an example implementation for those who wish to learn * how to write their own joystick using applications. */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * Should you need to contact me, the author, you can do so either by * e-mail - mail your message to < vojtech@suse.cz >, or by paper mail: * Vojtech Pavlik, Ucitelska 1576, Prague 8, 182 00 Czech Republic */ #include < sys/ioctl.h > #include < sys/time.h > #include < sys/types.h > #include < stdlib.h > #include < fcntl.h > #include < unistd.h > #include < stdio.h > #include < errno.h > #include < string.h > #include < linux/joystick.h > #define NAME_LENGTH 128 int main (int argc, char **argv) { int fd; unsigned char axes = 2; unsigned char buttons = 2; int version = 0x000800; char name[NAME_LENGTH] = "Unknown"; if (argc < 2 || argc > 3 || !strcmp("--help", argv[1])) { puts(""); puts("Usage: jstest [< mode >] < device >"); puts(""); puts("Modes:"); puts(" --normal One-line mode showing immediate status"); puts(" --old Same as --normal, using 0.x interface"); puts(" --event Prints events as they come in"); puts(" --nonblock Same as --event, in nonblocking mode"); puts(" --select Same as --event, using select() call"); puts(""); exit(1); } if ((fd = open(argv[argc - 1], O_RDONLY)) < 0) { perror("jstest"); exit(1); } ioctl(fd, JSIOCGVERSION, &version); ioctl(fd, JSIOCGAXES, &axes); ioctl(fd, JSIOCGBUTTONS, &buttons); ioctl(fd, JSIOCGNAME(NAME_LENGTH), name); printf("Joystick (%s) has %d axes and %d buttons. Driver version is %d.%d.%d.\n", name, axes, buttons, version >> 16, (version >> 8) & 0xff, version & 0xff); printf("Testing ... (interrupt to exit)\n"); /* * Old (0.x) interface. */ if ((argc == 2 && version < 0x010000) || !strcmp("--old", argv[1])) { struct JS_DATA_TYPE js; while (1) { if (read(fd, &js, JS_RETURN) != JS_RETURN) { perror("\njstest: error reading"); exit(1); } printf("Axes: X:%3d Y:%3d Buttons: A:%s B:%s\r", js.x, js.y, (js.buttons & 1) ? "on " : "off", (js.buttons & 2) ? "on " : "off"); fflush(stdout); usleep(10000); } } /* * Event interface, single line readout. */ if (argc == 2 || !strcmp("--normal", argv[1])) { int *axis; int *button; int i; struct js_event js; axis = calloc(axes, sizeof(int)); button = calloc(buttons, sizeof(char)); while (1) { if (read(fd, &js, sizeof(struct js_event)) != sizeof(struct js_event)) { perror("\njstest: error reading"); exit (1); } switch(js.type & ~JS_EVENT_INIT) { case JS_EVENT_BUTTON: button[js.number] = js.value; break; case JS_EVENT_AXIS: axis[js.number] = js.value; break; } printf("\r"); if (axes) { printf("Axes: "); for (i = 0; i < axes; i++) printf("%2d:%6d ", i, axis[i]); } if (buttons) { printf("Buttons: "); for (i = 0; i < buttons; i++) printf("%2d:%s ", i, button[i] ? "on " : "off"); } fflush(stdout); } } /* * Event interface, events being printed. */ if (!strcmp("--event", argv[1])) { struct js_event js; while (1) { if (read(fd, &js, sizeof(struct js_event)) != sizeof(struct js_event)) { perror("\njstest: error reading"); exit (1); } printf("Event: type %d, time %d, number %d, value %d\n", js.type, js.time, js.number, js.value); } } /* * Reading in nonblocking mode. */ if (!strcmp("--nonblock", argv[1])) { struct js_event js; fcntl(fd, F_SETFL, O_NONBLOCK); while (1) { while (read(fd, &js, sizeof(struct js_event)) == sizeof(struct js_event)) { printf("Event: type %d, time %d, number %d, value %d\n", js.type, js.time, js.number, js.value); } if (errno != EAGAIN) { perror("\njstest: error reading"); exit (1); } usleep(10000); } } /* * Using select() on joystick fd. */ if (!strcmp("--select", argv[1])) { struct js_event js; struct timeval tv; fd_set set; tv.tv_sec = 1; tv.tv_usec = 0; while (1) { FD_ZERO(&set); FD_SET(fd, &set); if (select(fd+1, &set, NULL, NULL, &tv)) { if (read(fd, &js, sizeof(struct js_event)) != sizeof(struct js_event)) { perror("\njstest: error reading"); exit (1); } printf("Event: type %d, time %d, number %d, value %d\n", js.type, js.time, js.number, js.value); } } } printf("jstest: unknown mode: %s\n", argv[1]); return -1; }
The following PCI drivers support the joystick natively. Driver Module Option Available Values --------------------------------------------------------------------------- als4000 joystick_port 0 = disable (default), 1 = auto-detect, manual: any address (e.g. 0x200) au88x0 N/A N/A azf3328 joystick 0 = disable, 1 = enable, -1 = auto (default) ens1370 joystick 0 = disable (default), 1 = enable ens1371 joystick_port 0 = disable (default), 1 = auto-detect, manual: 0x200, 0x208, 0x210, 0x218 cmipci joystick_port 0 = disable (default), 1 = auto-detect, manual: any address (e.g. 0x200) cs4281 N/A N/A cs46xx N/A N/A es1938 N/A N/A es1968 joystick 0 = disable (default), 1 = enable intel8x0(*1)joystick 0 = disable (default), 1 = enable sonicvibes N/A N/A trident N/A N/A via82xx(*2) joystick 0 = disable (default), 1 = enable ymfpci joystick_port 0 = disable (default), 1 = auto-detect, manual: 0x201, 0x202, 0x204, 0x205(*3) --------------------------------------------------------------------------- *1) not all chips support joystick *2) VIA686A/B only *3) With YMF744/754 chips, the port address can be chosen arbitrarily
Tiskni Sdílej: