Dotaz: nahodny reboot pri zatezi scsii disku

[j3nda]

ahoj,

chtel bych se zeptat na radu.

mam server: hp proliant dl 380 g3 a linux: Linux dan.fv.cz 2.6.38-11-generic-pae #50-Ubuntu SMP Mon Sep 12 22:21:04 UTC 2011 i686 i686 i386 GNU/Linux

a stava se mi to, ze pri zatezi disku, vetsi cteni nebo zapis. napr rsync a synchronizace 3GB dat apod. se server najednou rebootuje.

chci tomu prijit na kloub. nikde se nic nezaloguje, jako chyba disku pri cteni apod.

s ubuntu v tomto nastaveni nemam zkusenosti (spis gentoo) ubuntu tam je z duvodu vetsi bezstarostnosti.

muzete me navest, cim by to mohlo byt? prip. co zapnout, abych to mohl monitorovat? diky. j3.

root@dan:~# lspci 
00:00.0 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset) (rev 13)
00:00.1 Host bridge: Broadcom CMIC-WS Host Bridge (GC-LE chipset)
00:00.2 Host bridge: Broadcom CMIC-LE
00:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)
00:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01)
00:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out  Processor (rev 01)
00:0f.0 ISA bridge: Broadcom CSB5 South Bridge (rev 93)
00:0f.1 IDE interface: Broadcom CSB5 IDE Controller (rev 93)
00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 05)
00:0f.3 Host bridge: Broadcom CSB5 LPC bridge
00:10.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:10.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:11.0 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
00:11.2 Host bridge: Broadcom CIOB-X2 PCI-X I/O Bridge (rev 05)
01:03.0 RAID bus controller: Compaq Computer Corporation Smart Array 5i/532 (rev 01)
02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703X Gigabit Ethernet (rev 02)
03:01.0 RAID bus controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)
06:1e.0 PCI Hot-plug controller: Compaq Computer Corporation PCI Hotplug Controller (rev 14)

Odpovědi

[marcelius]

Skus vypnout ASR. Mel sem podobne problemy s tim samym modelem...

Jinak mas posledni firmware? PSP? V PSP mas docela slusne utility na monitorovani chovani serveru.

[drunkezz]

ASR to moze byt, hlavne ak je velky vyhul na cpu alebo i/o, najdes v logoch ILO karty popripade System Management Homepage (za predpokladu ze mas nainstalovany PSP -> proliant support pack)

dalej skontroluj stav Smartarrayu, tiez moze byt pricinou (hlavne ak je cache zalohovana baterkou a ta je v srackach)

D.

[j3nda]

takze asi fyzicky pristup co?

je nejaky balicek, ktery to psp (prip. nahlednuti do asr) resi?

[marcelius]

PSP je mozne stahnout ze stranky HP. PSP je spis vice baliku, proste Support Pack. Pri tom je vzdy navod jak ten PSP spustit. Pak se urcite podive na radic Smart Array (myslim hpacucli...?)

[drunkezz]

PSP je mnozstvo toolov a demonov, ktorymi sa managuje kontroluje HP box. t.j. jeho teploty otacky ventilatorov stav radica a co ja viem co este

 

najdes ho tu

http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?lang=en&cc=us&prodNameId=3716247&taskId=135&prodTypeId=18964&prodSeriesId=3716246&lang=en&cc=us

 

nakolko HP nepodporuje *deb distra stiahni si pre nejaky redhat, ked to rozbalis budes mat hrbu *.rpm suborov.

Alienom potom spravis z *.rpm *.deb balicky a normalne ich nainstalujes

 

Nepotrebujes ich instalovat vsetky

Mne napriklad stacia tieto:

 

ii  hp-health                          8.2.5.47-26                   hp System Health Application and Command line Utility Package
ii  hp-ilo                             8.3.0-119                     HP iLO Channel Interface Driver
ii  hp-smh-templates                   8.2.5.6-6                     HP System Management Homepage Templates
ii  hp-snmp-agents                     8.2.5.20-11                   Insight Management SNMP Agents for HP ProLiant Systems
ii  hpacucli                           8.28-13.0.10-10               HP Command Line Array Configuration Utility
rc  hpasm                              7.8.0-100.etch26              hp System Health Application and Insight Management Agents Package
ii  hponcfg                            2.2.0-6                       hponcfg - An RILOE II/iLo online configuration utility
ii  hpsmh                              3.0.2-75                      HP System Management Homepage

D.

[j3nda]

diky za nasmerovani. podivam se na to v noci a napisu.

[j3nda]

dalej skontroluj stav Smartarrayu, tiez moze byt pricinou (hlavne ak je cache zalohovana baterkou a ta je v srackach)

D.

hele, jak poznam, ze je to je zalohovano baterkou a ze je v haji? (do serverovny se chystam ve ct v noci)

[drunkezz]

prikaz hpacucli spusti management tool pre smartarray radic

 

a potom napr takto

 

root@h0stn4m3:> hpacucli
HP Array Configuration Utility CLI 8.28-13.0
Detecting Controllers...Done.
Type "help" for a list of supported commands.
Type "exit" to close the console.

=> controller all show                               

Smart Array 5i in Slot 0 (Embedded)

=> controller slot=0 show

Smart Array 5i in Slot 0 (Embedded)
Bus Interface: PCI
Slot: 0
RAID 6 (ADG) Status: Disabled
Controller Status: OK
Chassis Slot:
Hardware Revision: Rev B
Firmware Version: 2.58
Rebuild Priority: Low
Expand Priority: Low
Surface Scan Delay: 15 secs
Post Prompt Timeout: 0 secs
Cache Board Present: True
Cache Status: OK
Accelerator Ratio: 100% Read / 0% Write
Read Cache Size: 48 MB
Write Cache Size: 0 MB
Total Cache Size: 48 MB
No-Battery Write Cache: Disabled
Battery/Capacitor Count: 0
SATA NCQ Supported: False

=>

[j3nda]

tak mi to hlasi, ze musim upgradovat firmware...

mohl bys prosim napsat postup. s updatem firmwaru mam jenom negativni zkusenosti :-/ a nechci neco posrat.

nasel jsem toto, ale nevim co z toho updatovat.

root@dan:~# hpacucli ctrl all show config

FIRMWARE UPGRADE REQUIRED: A firmware update is recommended for this controller
                           to prevent rare potential data write errors on a
                           RAID 1 or RAID 1+0 volume in a scenario of
                           concurrent background surface analysis and I/O write
                           operations.  Please refer to Customer Advisory
                           c01587778 which can be found at hp.com.


Smart Array 5i in Slot 0 (Embedded)     

   array A (Parallel SCSI, Unused Space: 0 MB)


      logicaldrive 1 (67.8 GB, RAID 0, OK)

      physicaldrive 2:0   (port 2:id 0 , Parallel SCSI, 72.8 GB, OK)

   array B (Parallel SCSI, Unused Space: 0 MB)


      logicaldrive 2 (67.8 GB, RAID 0, OK)

      physicaldrive 2:1   (port 2:id 1 , Parallel SCSI, 72.8 GB, OK)

[j3nda]

snad pomuze: hpasmcli DISABLE ASR

[j3nda]

jo a jeste k te baterce, nasel jsem toto:

resp. vygeneroval: hpacucli - ctrl all diag file=/tmp/cucli.txt xml=off

je spravne, ze tam jsou nuly? protoze se zde nekdo zminil, ze kdyz je baterka v haji, tak je neco spatne.

root@dan:/tmp# grep -i batt cucli.txt 
   Cache Battery Count                  0 (0x00)
   Battery PIC Revision                 0x00
   Battery Count                        0 (0x0000)
   Battery Status                       0x0000
   Failed Batteries                     0 (0x0000)
   Non Battery Backed Memory Size       48 MB (0x0030)
   Installed Batteries                  0x0000
   Detailed Battery Status              All Zeroes (16 x [0x00])