Administrace komentářů

sh-4.4#  dmesg -wH
[bře 7 20:46] Linux version 4.10.8-pclos1 (tex@localhost.localdomain) (gcc version 4.9.2 (GCC) ) #1 SMP Fri Mar 31 16:45:16 CDT 2017
[  +0,000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.10.8-pclos1 root=UUID=f4bcf44d-1abb-4464-a811-b0f9132848a9 ro failsafe
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[  +0,000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[  +0,000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[  +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[  +0,000000] e820: BIOS-provided physical RAM map:
[  +0,000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[  +0,000000] BIOS-e820: [mem 0x0000000000100000-0x00000000de35bfff] usable
[  +0,000000] BIOS-e820: [mem 0x00000000de35c000-0x00000000de365fff] type 20
[  +0,000000] BIOS-e820: [mem 0x00000000de366000-0x00000000de3e6fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000de3e7000-0x00000000de414fff] type 20
[  +0,000000] BIOS-e820: [mem 0x00000000de415000-0x00000000de93efff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000de93f000-0x00000000deba3fff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x00000000deba4000-0x00000000debb5fff] ACPI data
[  +0,000000] BIOS-e820: [mem 0x00000000debb6000-0x00000000debbefff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x00000000debbf000-0x00000000debc3fff] ACPI data
[  +0,000000] BIOS-e820: [mem 0x00000000debc4000-0x00000000dec06fff] ACPI NVS
[  +0,000000] BIOS-e820: [mem 0x00000000dec07000-0x00000000deffffff] usable
[  +0,000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fed90000-0x00000000fed93fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[  +0,000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[  +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000011dffffff] usable
[  +0,000000] NX (Execute Disable) protection: active
[  +0,000000] efi: EFI v2.31 by American Megatrends
[  +0,000000] efi:  ACPI=0xdeba4000  ACPI 2.0=0xdeba4000  SMBIOS=0xde43d918  MPS=0xf4d80 
[  +0,000000] SMBIOS 2.7 present.
[  +0,000000] DMI: Hewlett-Packard HP Compaq Elite 8300 SFF/3397, BIOS K01 v02.05 05/07/2012
[  +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[  +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[  +0,000000] e820: last_pfn = 0x11e000 max_arch_pfn = 0x400000000
[  +0,000000] MTRR default type: uncachable
[  +0,000000] MTRR fixed ranges enabled:
[  +0,000000]   00000-9FFFF write-back
[  +0,000000]   A0000-BFFFF uncachable                                                                                                                                                                           
[  +0,000000]   C0000-CFFFF write-protect                                                                                                                                                                        
[  +0,000000]   D0000-DFFFF uncachable                                                                                                                                                                           
[  +0,000000]   E0000-FFFFF write-protect                                                                                                                                                                        
[  +0,000000] MTRR variable ranges enabled:                                                                                                                                                                      
[  +0,000000]   0 base 000000000 mask F00000000 write-back                                                                                                                                                       
[  +0,000000]   1 base 100000000 mask FE0000000 write-back                                                                                                                                                       
[  +0,000000]   2 base 0E0000000 mask FE0000000 uncachable                                                                                                                                                       
[  +0,000000]   3 base 11E000000 mask FFE000000 uncachable                                                                                                                                                       
[  +0,000000]   4 disabled                                                                                                                                                                                       
[  +0,000000]   5 disabled                                                                                                                                                                                       
[  +0,000000]   6 disabled                                                                                                                                                                                       
[  +0,000000]   7 disabled                                                                                                                                                                                       
[  +0,000000]   8 disabled                                                                                                                                                                                       
[  +0,000000]   9 disabled                                                                                                                                                                                       
[  +0,000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT                                                                                                                                       
[  +0,000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved                                                                                                                                       
[  +0,000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000                                                                                                                                                
[  +0,000000] found SMP MP-table at [mem 0x000f4d70-0x000f4d7f] mapped at [ffff8a41400f4d70]                                                                                                                     
[  +0,000000] Base memory trampoline at [ffff8a4140099000] 99000 size 24576                                                                                                                                      
[  +0,000000] BRK [0xbac5d000, 0xbac5dfff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac5e000, 0xbac5efff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac5f000, 0xbac5ffff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac60000, 0xbac60fff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac61000, 0xbac61fff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac62000, 0xbac62fff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac63000, 0xbac63fff] PGTABLE                                                                                                                                                               
[  +0,000000] BRK [0xbac64000, 0xbac64fff] PGTABLE                                                                                                                                                               
[  +0,000000] RAMDISK: [mem 0x37339000-0x37993fff]                                                                                                                                                               
[  +0,000000] ACPI: Early table checksum verification disabled
[  +0,000000] ACPI: RSDP 0x00000000DEBA4000 000024 (v02 HPQOEM)
[  +0,000000] ACPI: XSDT 0x00000000DEBA4080 000084 (v01 HPQOEM SLIC-BPC 01072009 AMI  00010013)
[  +0,000000] ACPI: FACP 0x00000000DEBADFE8 0000F4 (v04 HPQOEM SLIC-BPC 01072009 AMI  00010013)
[  +0,000000] ACPI: DSDT 0x00000000DEBA4198 009E4A (v02 HPQOEM SLIC-BPC 00000017 INTL 20051117)
[  +0,000000] ACPI: FACS 0x00000000DEBB6F80 000040
[  +0,000000] ACPI: APIC 0x00000000DEBAE0E0 000084 (v03 HPQOEM SLIC-BPC 01072009 AMI  00010013)
[  +0,000000] ACPI: MCFG 0x00000000DEBAE168 00003C (v01 HPQOEM SLIC-BPC 01072009 MSFT 00000097)
[  +0,000000] ACPI: HPET 0x00000000DEBAE1A8 000038 (v01 HPQOEM SLIC-BPC 01072009 AMI. 00000005)
[  +0,000000] ACPI: SSDT 0x00000000DEBAE1E0 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[  +0,000000] ACPI: SSDT 0x00000000DEBAE550 00544C (v01 COMPAQ WMI      00000001 MSFT 03000001)
[  +0,000000] ACPI: SLIC 0x00000000DEBB39A0 000176 (v01 HPQOEM SLIC-BPC 00000001      00000000)
[  +0,000000] ACPI: SSDT 0x00000000DEBB3B18 0009AA (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[  +0,000000] ACPI: SSDT 0x00000000DEBB44C8 000A92 (v01 PmRef  CpuPm    00003000 INTL 20051117)
[  +0,000000] ACPI: TCPA 0x00000000DEBB4F60 000032 (v02 APTIO4 NAPAASF  00000001 MSFT 01000013)
[  +0,000000] ACPI: ASF! 0x00000000DEBB4F98 0000A5 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[  +0,000000] ACPI: BGRT 0x00000000DEBB5040 00003C (v00 HPQOEM SLIC-BPC 01072009 AMI  00010013)
[  +0,000000] ACPI: Local APIC address 0xfee00000
[  +0,000000] Zone ranges:
[  +0,000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[  +0,000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[  +0,000000]   Normal   [mem 0x0000000100000000-0x000000011dffffff]
[  +0,000000] Movable zone start for each node
[  +0,000000] Early memory node ranges
[  +0,000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[  +0,000000]   node   0: [mem 0x0000000000100000-0x00000000de35bfff]
[  +0,000000]   node   0: [mem 0x00000000dec07000-0x00000000deffffff]
[  +0,000000]   node   0: [mem 0x0000000100000000-0x000000011dffffff]
[  +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011dffffff]
[  +0,000000] On node 0 totalpages: 1033972
[  +0,000000]   DMA zone: 64 pages used for memmap
[  +0,000000]   DMA zone: 43 pages reserved
[  +0,000000]   DMA zone: 3999 pages, LIFO batch:0
[  +0,000000]   DMA32 zone: 14174 pages used for memmap
[  +0,000000]   DMA32 zone: 907093 pages, LIFO batch:31
[  +0,000000]   Normal zone: 1920 pages used for memmap
[  +0,000000]   Normal zone: 122880 pages, LIFO batch:31
[  +0,000000] ACPI: PM-Timer IO Port: 0x408
[  +0,000000] ACPI: Local APIC address 0xfee00000
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[  +0,000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[  +0,000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[  +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[  +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[  +0,000000] ACPI: IRQ0 used by override.
[  +0,000000] ACPI: IRQ9 used by override.
[  +0,000000] Using ACPI (MADT) for SMP configuration information
[  +0,000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[  +0,000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[  +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[  +0,000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xde35c000-0xde365fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xde366000-0xde3e6fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xde3e7000-0xde414fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xde415000-0xde93efff]
[  +0,000000] PM: Registered nosave memory: [mem 0xde93f000-0xdeba3fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdeba4000-0xdebb5fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdebb6000-0xdebbefff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdebbf000-0xdebc3fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdebc4000-0xdec06fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xdf000000-0xf7ffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed8ffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed90000-0xfed93fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfed94000-0xfedfffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[  +0,000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[  +0,000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[  +0,000000] e820: [mem 0xdf000000-0xf7ffffff] available for PCI devices
[  +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3821924579961850 ns
[  +0,000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[  +0,000000] percpu: Embedded 33 pages/cpu @ffff8a425dc00000 s97432 r8192 d29544 u524288
[  +0,000000] pcpu-alloc: s97432 r8192 d29544 u524288 alloc=1*2097152
[  +0,000000] pcpu-alloc: [0] 0 1 2 3 
[  +0,000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1017771
[  +0,000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.10.8-pclos1 root=UUID=f4bcf44d-1abb-4464-a811-b0f9132848a9 ro failsafe
[  +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[  +0,000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[  +0,000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[  +0,000000] Calgary: detecting Calgary via BIOS EBDA area
[  +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[  +0,000000] Memory: 3778364K/4135888K available (6129K kernel code, 560K rwdata, 1916K rodata, 940K init, 876K bss, 357524K reserved, 0K cma-reserved)
[  +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[  +0,000000] Hierarchical RCU implementation.
[  +0,000000]   Build-time adjustment of leaf fanout to 64.
[  +0,000000]   RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[  +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[  +0,000000] NR_IRQS:4352 nr_irqs:456 16
[  +0,000000] Console: colour dummy device 80x25
[  +0,000000] console [tty0] enabled
[  +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[  +0,000000] hpet clockevent registered
[  +0,000000] tsc: Fast TSC calibration using PIT
[  +0,000000] tsc: Detected 3292.560 MHz processor
[  +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6585.12 BogoMIPS (lpj=6585120)
[  +0,000004] pid_max: default: 32768 minimum: 301
[  +0,000007] ACPI: Core revision 20160930
[  +0,003730] ACPI: 5 ACPI AML tables successfully acquired and loaded
[  +0,000454] Security Framework initialized
[  +0,000009] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[  +0,000002] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[  +0,000160] CPU: Physical Processor ID: 0
[  +0,000003] CPU: Processor Core ID: 0
[  +0,000004] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[  +0,000002] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[  +0,000004] mce: CPU supports 7 MCE banks
[  +0,000007] CPU0: Thermal monitoring enabled (TM1)
[  +0,000008] process: using mwait in idle threads
[  +0,000003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[  +0,000002] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[  +0,000097] Freeing SMP alternatives memory: 28K
[  +0,000138] ioremap: invalid physical address 1376e01800000001
[  +0,000002] ------------[ cut here ]------------
[  +0,000006] WARNING: CPU: 0 PID: 0 at arch/x86/mm/ioremap.c:103 __ioremap_caller+0x316/0x350
[  +0,000002] Modules linked in:
[  +0,000004] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.8-pclos1 #1
[  +0,000002] Hardware name: Hewlett-Packard HP Compaq Elite 8300 SFF/3397, BIOS K01 v02.05 05/07/2012
[  +0,000004] Call Trace:
[  +0,000004]  ? dump_stack+0x46/0x5d
[  +0,000004]  ? __warn+0xba/0xe0
[  +0,000004]  ? memremap+0x10f/0x150
[  +0,000003]  ? __ioremap_caller+0x316/0x350
[  +0,000005]  ? acpi_tb_acquire_table+0x34/0x60
[  +0,000002]  ? memremap+0x10f/0x150
[  +0,000005]  ? efi_bgrt_init+0xca/0x164
[  +0,000005]  ? start_kernel+0x3dc/0x3ee
[  +0,000002]  ? start_cpu+0x14/0x14
[  +0,000004] ---[ end trace 0000000000000000 ]---
[  +0,000002] efi_bgrt: Ignoring BGRT: failed to map image header memory
[  +0,004173] smpboot: Max logical packages: 2
[  +0,000429] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[  +0,020010] TSC deadline timer enabled
[  +0,000002] smpboot: CPU0: Intel(R) Core(TM) i3-3220 CPU @ 3.30GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[  +0,000038] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[  +0,000019] ... version:                3
[  +0,000002] ... bit width:              48
[  +0,000002] ... generic registers:      4
[  +0,000002] ... value mask:             0000ffffffffffff
[  +0,000002] ... max period:             00007fffffffffff
[  +0,000001] ... fixed-purpose events:   3
[  +0,000002] ... event mask:             000000070000000f
[  +0,000095] smp: Bringing up secondary CPUs ...
[  +0,000040] x86: Booting SMP configuration:
[  +0,000003] .... node  #0, CPUs:      #1 #2 #3
[  +0,215941] smp: Brought up 1 node, 4 CPUs
[  +0,000006] smpboot: Total of 4 processors activated (26346.51 BogoMIPS)
[  +0,002142] devtmpfs: initialized
[  +0,000119] PM: Registering ACPI NVS region [mem 0xde93f000-0xdeba3fff] (2510848 bytes)
[  +0,000023] PM: Registering ACPI NVS region [mem 0xdebb6000-0xdebbefff] (36864 bytes)
[  +0,000002] PM: Registering ACPI NVS region [mem 0xdebc4000-0xdec06fff] (274432 bytes)
[  +0,000008] reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
[  +0,000037] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 3822520892550000 ns
[  +0,000005] futex hash table entries: 1024 (order: 4, 65536 bytes)
[  +0,000027] pinctrl core: initialized pinctrl subsystem
[  +0,000067] NET: Registered protocol family 16
[  +0,005532] cpuidle: using governor ladder
[  +0,010004] cpuidle: using governor menu
[  +0,000005] PCCT header not found.
[  +0,000037] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[  +0,000005] ACPI: bus type PCI registered
[  +0,000005] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[  +0,000059] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[  +0,000005] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[  +0,000007] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[  +0,000035] PCI: Using configuration type 1 for base access
[  +0,000028] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[  +0,007930] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[  +0,000124] ACPI: Added _OSI(Module Device)
[  +0,000003] ACPI: Added _OSI(Processor Device)
[  +0,000002] ACPI: Added _OSI(3.0 _SCP Extensions)
[  +0,000002] ACPI: Added _OSI(Processor Aggregator Device)
[  +0,000141] ACPI: Executed 1 blocks of module-level executable AML code
[  +0,002731] ACPI: Dynamic OEM Table Load:
[  +0,000007] ACPI: SSDT 0xFFFF8A4259258000 00083B (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[  +0,000217] ACPI: Dynamic OEM Table Load:
[  +0,000006] ACPI: SSDT 0xFFFF8A42592FD400 000303 (v01 PmRef  ApIst    00003000 INTL 20051117)
[  +0,000160] ACPI: Dynamic OEM Table Load:
[  +0,000005] ACPI: SSDT 0xFFFF8A42592FAC00 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[  +0,000589] ACPI: Interpreter enabled
[  +0,000016] ACPI: (supports S0 S3 S4 S5)
[  +0,000002] ACPI: Using IOAPIC for interrupt routing
[  +0,000019] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[  +0,004292] ACPI: Power Resource [FN00] (off)
[  +0,000050] ACPI: Power Resource [FN01] (off)
[  +0,000047] ACPI: Power Resource [FN02] (off)
[  +0,000048] ACPI: Power Resource [FN03] (off)
[  +0,000047] ACPI: Power Resource [FN04] (off)
[  +0,000378] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[  +0,000006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[  +0,000139] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[  +0,000078] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[  +0,000003] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[  +0,000286] PCI host bridge to bus 0000:00
[  +0,000004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[  +0,000002] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[  +0,000003] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[  +0,000003] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[  +0,000002] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[  +0,000003] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[  +0,000002] pci_bus 0000:00: root bus resource [bus 00-3e]
[  +0,000007] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[  +0,000066] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[  +0,000023] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[  +0,000032] pci 0000:00:01.0: System wakeup disabled by ACPI
[  +0,000048] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[  +0,000018] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[  +0,000063] pci 0000:00:14.0: PME# supported from D3hot D3cold
[  +0,000032] pci 0000:00:14.0: System wakeup disabled by ACPI
[  +0,000028] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[  +0,000019] pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c00f 64bit]
[  +0,000067] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[  +0,000057] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002
[  +0,000012] pci 0000:00:16.3: reg 0x10: [io  0xf0a0-0xf0a7]
[  +0,000007] pci 0000:00:16.3: reg 0x14: [mem 0xf713a000-0xf713afff]
[  +0,000112] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[  +0,000013] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[  +0,000007] pci 0000:00:19.0: reg 0x14: [mem 0xf7139000-0xf7139fff]
[  +0,000007] pci 0000:00:19.0: reg 0x18: [io  0xf040-0xf05f]
[  +0,000052] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[  +0,000033] pci 0000:00:19.0: System wakeup disabled by ACPI
[  +0,000029] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[  +0,000015] pci 0000:00:1a.0: reg 0x10: [mem 0xf7138000-0xf71383ff]
[  +0,000076] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[  +0,000046] pci 0000:00:1a.0: System wakeup disabled by ACPI
[  +0,000026] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[  +0,000013] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[  +0,000056] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[  +0,000036] pci 0000:00:1b.0: System wakeup disabled by ACPI
[  +0,000027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[  +0,000015] pci 0000:00:1d.0: reg 0x10: [mem 0xf7137000-0xf71373ff]
[  +0,000076] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[  +0,000045] pci 0000:00:1d.0: System wakeup disabled by ACPI
[  +0,000022] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[  +0,000070] pci 0000:00:1e.0: System wakeup disabled by ACPI
[  +0,000027] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
[  +0,000144] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[  +0,000012] pci 0000:00:1f.2: reg 0x10: [io  0xf090-0xf097]
[  +0,000006] pci 0000:00:1f.2: reg 0x14: [io  0xf080-0xf083]
[  +0,000006] pci 0000:00:1f.2: reg 0x18: [io  0xf070-0xf077]
[  +0,000006] pci 0000:00:1f.2: reg 0x1c: [io  0xf060-0xf063]
[  +0,000006] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[  +0,000006] pci 0000:00:1f.2: reg 0x24: [mem 0xf7136000-0xf71367ff]
[  +0,000036] pci 0000:00:1f.2: PME# supported from D3hot
[  +0,000052] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[  +0,000013] pci 0000:00:1f.3: reg 0x10: [mem 0xf7135000-0xf71350ff 64bit]
[  +0,000018] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[  +0,000091] pci 0000:01:00.0: [10de:10d8] type 00 class 0x030000
[  +0,000007] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[  +0,000007] pci 0000:01:00.0: reg 0x14: [mem 0xf0000000-0xf3ffffff 64bit pref]
[  +0,000006] pci 0000:01:00.0: reg 0x1c: [mem 0xf4000000-0xf5ffffff 64bit pref]
[  +0,000005] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[  +0,000004] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[  +0,000064] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[  +0,000007] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[  +0,005789] pci 0000:00:01.0: PCI bridge to [bus 01]
[  +0,000004] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[  +0,000001] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[  +0,000002] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf5ffffff 64bit pref]
[  +0,000063] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[  +0,000009] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[  +0,000001] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[  +0,000001] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[  +0,000001] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[  +0,000000] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[  +0,000001] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[  +0,000001] pci 0000:00:1e.0:   bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[  +0,000000] pci 0000:00:1e.0:   bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[  +0,000011] pci_bus 0000:00: on NUMA node 0
[  +0,000454] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000038] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[  +0,000039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[  +0,000037] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[  +0,000034] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[  +0,000038] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[  +0,000035] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[  +0,000038] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[  +0,000157] ACPI: Enabled 4 GPEs in block 00 to 3F
[  +0,000064] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[  +0,000003] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[  +0,000004] pci 0000:01:00.0: vgaarb: bridge control possible
[  +0,000002] vgaarb: loaded
[  +0,000038] SCSI subsystem initialized
[  +0,000022] libata version 3.00 loaded.
[  +0,000013] ACPI: bus type USB registered
[  +0,000011] usbcore: registered new interface driver usbfs
[  +0,000006] usbcore: registered new interface driver hub
[  +0,000009] usbcore: registered new device driver usb
[  +0,000034] Registered efivars operations
[  +0,008639] PCI: Using ACPI for IRQ routing
[  +0,001420] PCI: pci_cache_line_size set to 64 bytes
[  +0,000034] e820: reserve RAM buffer [mem 0xde35c000-0xdfffffff]
[  +0,000001] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[  +0,000000] e820: reserve RAM buffer [mem 0x11e000000-0x11fffffff]
[  +0,000066] NetLabel: Initializing
[  +0,000003] NetLabel:  domain hash size = 128
[  +0,000001] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[  +0,000013] NetLabel:  unlabeled traffic allowed by default
[  +0,000074] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[  +0,000005] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[  +0,002019] clocksource: Switched to clocksource hpet
[  +0,000019] VFS: Disk quotas dquot_6.6.0
[  +0,000010] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[  +0,000039] pnp: PnP ACPI init
[  +0,000048] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[  +0,000004] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[  +0,000043] system 00:01: [io  0x0680-0x069f] has been reserved
[  +0,000002] system 00:01: [io  0x0200-0x020f] has been reserved
[  +0,000003] system 00:01: [io  0xffff] has been reserved
[  +0,000002] system 00:01: [io  0xffff] has been reserved
[  +0,000002] system 00:01: [io  0x0400-0x0453] has been reserved
[  +0,000003] system 00:01: [io  0x0458-0x047f] has been reserved
[  +0,000002] system 00:01: [io  0x0500-0x057f] has been reserved
[  +0,000003] system 00:01: [io  0x164e-0x164f] has been reserved
[  +0,000003] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000012] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[  +0,000027] system 00:03: [io  0x0454-0x0457] has been reserved
[  +0,000003] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[  +0,000070] system 00:04: [io  0x0a20-0x0a3f] has been reserved
[  +0,000003] system 00:04: [io  0x0a10-0x0a1f] has been reserved
[  +0,000003] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000024] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[  +0,000026] pnp 00:06: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[  +0,000026] system 00:07: [io  0x04d0-0x04d1] has been reserved
[  +0,000003] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000116] pnp 00:08: [dma 0 disabled]
[  +0,000051] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[  +0,000140] pnp 00:09: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[  +0,000122] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[  +0,000003] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[  +0,000002] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[  +0,000003] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[  +0,000002] system 00:0a: [mem 0xf8000000-0xfbffffff] has been reserved
[  +0,000003] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[  +0,000002] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[  +0,000003] system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved
[  +0,000002] system 00:0a: [mem 0xff000000-0xffffffff] has been reserved
[  +0,000003] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[  +0,000002] system 00:0a: [mem 0xe0000000-0xe0000fff] has been reserved
[  +0,000003] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[  +0,000098] pnp: PnP ACPI: found 11 devices
[  +0,005772] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[  +0,000020] pci 0000:00:01.0: PCI bridge to [bus 01]
[  +0,000003] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[  +0,000004] pci 0000:00:01.0:   bridge window [mem 0xf6000000-0xf70fffff]
[  +0,000003] pci 0000:00:01.0:   bridge window [mem 0xf0000000-0xf5ffffff 64bit pref]
[  +0,000004] pci 0000:00:1e.0: PCI bridge to [bus 02]
[  +0,000012] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[  +0,000001] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[  +0,000001] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[  +0,000001] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[  +0,000000] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[  +0,000001] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[  +0,000001] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[  +0,000001] pci_bus 0000:00: resource 11 [mem 0xe0000000-0xfeafffff window]
[  +0,000001] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[  +0,000000] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[  +0,000001] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf5ffffff 64bit pref]
[  +0,000001] pci_bus 0000:02: resource 4 [io  0x0000-0x0cf7 window]
[  +0,000001] pci_bus 0000:02: resource 5 [io  0x0d00-0xffff window]
[  +0,000000] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[  +0,000001] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[  +0,000001] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[  +0,000001] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[  +0,000000] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[  +0,000001] pci_bus 0000:02: resource 11 [mem 0xe0000000-0xfeafffff window]
[  +0,000055] NET: Registered protocol family 2
[  +0,000092] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[  +0,000056] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[  +0,000111] TCP: Hash tables configured (established 32768 bind 32768)
[  +0,000020] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[  +0,000016] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[  +0,000039] NET: Registered protocol family 1
[  +0,036959] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[  +0,000008] PCI: CLS 64 bytes, default 64
[  +0,000029] Trying to unpack rootfs image as initramfs...
[  +0,065028] Freeing initrd memory: 6508K
[  +0,000007] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[  +0,000003] software IO TLB [mem 0xda35c000-0xde35c000] (64MB) mapped at [ffff8a421a35c000-ffff8a421e35bfff]
[  +0,000061] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[  +0,000003] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[  +0,000002] RAPL PMU: hw unit of domain package 2^-16 Joules
[  +0,000002] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[  +0,000477] audit: initializing netlink subsys (disabled)
[  +0,000200] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[  +0,000885] zbud: loaded
[  +0,000140] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[  +0,000488] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[  +0,000021] io scheduler noop registered
[  +0,000003] io scheduler deadline registered
[  +0,000006] io scheduler cfq registered
[  +0,000018] io scheduler bfq registered (default)
[  +0,000002] BFQ I/O-scheduler: v8r8 (with cgroups support)
[  +0,000205] efifb: probing for efifb
[  +0,000011] efifb: framebuffer at 0xf5000000, using 1920k, total 1920k
[  +0,000003] efifb: mode is 800x600x32, linelength=3200, pages=1
[  +0,000001] efifb: scrolling: redraw
[  +0,000003] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[  +0,000993] Console: switching to colour frame buffer device 100x37
[  +0,000918] fb0: EFI VGA frame buffer device
[  +0,000013] intel_idle: MWAIT substates: 0x1120
[  +0,000000] intel_idle: v0.4.1 model 0x3A
[  +0,000104] intel_idle: lapic_timer_reliable_states 0xffffffff
[  +0,000052] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[  +0,000024] ACPI: Power Button [PWRB]
[  +0,000029] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[  +0,000019] ACPI: Power Button [PWRF]
[  +0,000405] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[  +0,000116] thermal LNXTHERM:00: registered as thermal_zone0
[  +0,000014] ACPI: Thermal Zone [TZ00] (28 C)
[  +0,000141] thermal LNXTHERM:01: registered as thermal_zone1
[  +0,000014] ACPI: Thermal Zone [TZ01] (30 C)
[  +0,000026] GHES: HEST is not enabled!
[  +0,000527] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[  +0,021066] 00:08: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[  +0,000772] serial 0000:00:16.3: enabling device (0000 -> 0003)
[  +0,020982] 0000:00:16.3: ttyS1 at I/O 0xf0a0 (irq = 19, base_baud = 115200) is a 16550A
[  +0,000824] Non-volatile memory driver v1.3
[  +0,000524] Linux agpgart interface v0.103
[  +0,001989] brd: module loaded
[  +0,000540] libphy: Fixed MDIO Bus: probed
[  +0,000516] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[  +0,000488] ehci-pci: EHCI PCI platform driver
[  +0,000563] ehci-pci 0000:00:1a.0: EHCI Host Controller
[  +0,000503] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[  +0,000504] ehci-pci 0000:00:1a.0: debug port 2
[  +0,004362] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[  +0,000008] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7138000
[  +0,009254] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[  +0,000486] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000476] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000483] usb usb1: Product: EHCI Host Controller
[  +0,000479] usb usb1: Manufacturer: Linux 4.10.8-pclos1 ehci_hcd
[  +0,000489] usb usb1: SerialNumber: 0000:00:1a.0
[  +0,000570] hub 1-0:1.0: USB hub found
[  +0,000472] hub 1-0:1.0: 3 ports detected
[  +0,000618] ehci-pci 0000:00:1d.0: EHCI Host Controller
[  +0,000522] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[  +0,000482] ehci-pci 0000:00:1d.0: debug port 2
[  +0,004368] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[  +0,000005] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7137000
[  +0,008548] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[  +0,000456] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000439] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000435] usb usb2: Product: EHCI Host Controller
[  +0,000417] usb usb2: Manufacturer: Linux 4.10.8-pclos1 ehci_hcd
[  +0,000415] usb usb2: SerialNumber: 0000:00:1d.0
[  +0,000495] hub 2-0:1.0: USB hub found
[  +0,000400] hub 2-0:1.0: 3 ports detected
[  +0,000466] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[  +0,000398] ohci-pci: OHCI PCI platform driver
[  +0,000409] uhci_hcd: USB Universal Host Controller Interface driver
[  +0,000477] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000444] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[  +0,001486] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[  +0,000400] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[  +0,000062] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[  +0,000390] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000392] usb usb3: Product: xHCI Host Controller
[  +0,000399] usb usb3: Manufacturer: Linux 4.10.8-pclos1 xhci-hcd
[  +0,000398] usb usb3: SerialNumber: 0000:00:14.0
[  +0,000478] hub 3-0:1.0: USB hub found
[  +0,000392] hub 3-0:1.0: 4 ports detected
[  +0,000616] xhci_hcd 0000:00:14.0: xHCI Host Controller
[  +0,000428] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[  +0,000422] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[  +0,000399] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[  +0,000401] usb usb4: Product: xHCI Host Controller
[  +0,000401] usb usb4: Manufacturer: Linux 4.10.8-pclos1 xhci-hcd
[  +0,000398] usb usb4: SerialNumber: 0000:00:14.0
[  +0,000473] hub 4-0:1.0: USB hub found
[  +0,000396] hub 4-0:1.0: 4 ports detected
[  +0,000620] usbcore: registered new interface driver usbserial
[  +0,000393] usbcore: registered new interface driver usbserial_generic
[  +0,000392] usbserial: USB Serial support registered for generic
[  +0,000415] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[  +0,003177] serio: i8042 KBD port at 0x60,0x64 irq 1
[  +0,000404] serio: i8042 AUX port at 0x60,0x64 irq 12
[  +0,000532] mousedev: PS/2 mouse device common for all mice
[  +0,000496] rtc_cmos 00:02: RTC can wake from S4
[  +0,000540] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[  +0,000429] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[  +0,000415] intel_pstate: Intel P-state driver initializing
[  +0,000678] EFI Variables Facility v0.08 2004-May-17
[  +0,009811] hidraw: raw HID events driver (C) Jiri Kosina
[  +0,000472] usbcore: registered new interface driver usbhid
[  +0,000421] usbhid: USB HID core driver
[  +0,000552] NET: Registered protocol family 10
[  +0,000562] Segment Routing with IPv6
[  +0,000423] NET: Registered protocol family 17
[  +0,000410] Key type dns_resolver registered
[  +0,000402] mpls_gso: MPLS GSO support
[  +0,000656] microcode: sig=0x306a9, pf=0x2, revision=0x12
[  +0,000448] microcode: Microcode Update Driver: v2.2.
[  +0,000130] registered taskstats version 1
[  +0,000781] zswap: loaded using pool lzo/zbud
[  +0,000621] rtc_cmos 00:02: setting system clock to 2018-03-07 20:46:52 UTC (1520455612)
[  +0,000880] Freeing unused kernel memory: 940K
[  +0,000401] Write protecting the kernel read-only data: 10240k
[  +0,000885] Freeing unused kernel memory: 2044K
[  +0,000612] Freeing unused kernel memory: 132K
[  +0,255586] usb 1-1: new high-speed USB device number 2 using ehci-pci
[  +0,017877] usb 2-1: new high-speed USB device number 2 using ehci-pci
[  +0,013386] ahci 0000:00:1f.2: version 3.0
[  +0,000150] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[  +0,010115] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x15 impl SATA mode
[  +0,000049] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[  +0,010689] scsi host0: ahci
[  +0,000088] scsi host1: ahci
[  +0,000082] scsi host2: ahci
[  +0,000068] scsi host3: ahci
[  +0,000071] scsi host4: ahci
[  +0,000057] scsi host5: ahci
[  +0,000031] ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100 irq 26
[  +0,000019] ata2: DUMMY
[  +0,000008] ata3: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136200 irq 26
[  +0,000018] ata4: DUMMY
[  +0,000009] ata5: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136300 irq 26
[  +0,000018] ata6: DUMMY
[  +0,027170] usb 3-2: new low-speed USB device number 2 using xhci_hcd
[  +0,046698] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[  +0,000018] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,000377] hub 1-1:1.0: USB hub found
[  +0,000223] hub 1-1:1.0: 6 ports detected
[  +0,017380] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[  +0,000019] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  +0,000390] hub 2-1:1.0: USB hub found
[  +0,000202] hub 2-1:1.0: 8 ports detected
[  +0,115605] usb 3-2: New USB device found, idVendor=0458, idProduct=003a
[  +0,000034] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  +0,000040] usb 3-2: Product: Optical Mouse
[  +0,000009] usb 3-2: Manufacturer: Genius
[  +0,004276] input: Genius Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:0458:003A.0001/input/input4
[  +0,000529] hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:14.0-2/input0
[  +0,102970] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[  +0,001873] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000003] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000486] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,001422] ata1.00: ATA-8: ST250DM000-1BD141, HP73, max UDMA/100
[  +0,000491] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[  +0,002128] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000003] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000496] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,001449] ata1.00: configured for UDMA/100
[  +0,000693] scsi 0:0:0:0: Direct-Access     ATA      ST250DM000-1BD14 HP73 PQ: 0 ANSI: 5
[  +0,022324] sd 0:0:0:0: Attached scsi generic sg0 type 0
[  +0,000011] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[  +0,000001] sd 0:0:0:0: [sda] 4096-byte physical blocks
[  +0,000005] sd 0:0:0:0: [sda] Write Protect is off
[  +0,000001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[  +0,000007] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[  +0,027834] usb 3-4: new low-speed USB device number 3 using xhci_hcd
[  +0,012168]  sda: sda1 sda2 sda3 sda4
[  +0,000741] sd 0:0:0:0: [sda] Attached SCSI disk
[  +0,168939] usb 3-4: New USB device found, idVendor=413c, idProduct=2107
[  +0,000531] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  +0,000514] usb 3-4: Product: Dell USB Entry Keyboard
[  +0,000508] usb 3-4: Manufacturer: DELL
[  +0,003871] input: DELL Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:413C:2107.0002/input/input5
[  +0,014725] tsc: Refined TSC clocksource calibration: 3292.532 MHz
[  +0,000579] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2f75be03e13, max_idle_ns: 440795370252 ns
[  +0,039478] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.11 Keyboard [DELL Dell USB Entry Keyboard] on usb-0000:00:14.0-4/input0
[  +0,050759] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[  +0,002890] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000003] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000628] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,002262] ata3.00: ATAPI: hp      DVD RW AD-7290HR, 1HR5, max UDMA/100
[  +0,003221] ata3.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[  +0,000003] ata3.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[  +0,000648] ata3.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[  +0,002260] ata3.00: configured for UDMA/100
[  +0,001846] scsi 2:0:0:0: CD-ROM            hp       DVD RW AD-7290HR 1HR5 PQ: 0 ANSI: 5
[  +0,025516] sr 2:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[  +0,000600] cdrom: Uniform CD-ROM driver Revision: 3.20
[  +0,000685] sr 2:0:0:0: Attached scsi CD-ROM sr0
[  +0,000055] sr 2:0:0:0: Attached scsi generic sg1 type 5
[  +0,311406] ata5: SATA link down (SStatus 0 SControl 300)
[  +0,474384] random: fast init done
[  +0,090939] clocksource: Switched to clocksource tsc
[  +0,084318] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
[  +0,975944] random: crng init done
[  +1,252953] udevd[175]: starting version 173
[  +0,938849] ACPI: Video Device [PEG0] (multi-head: yes  rom: no  post: no)
[  +0,000155] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[  +0,000068] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[  +0,000674] acpi device:1a: registered as cooling_device9
[  +0,000026] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/LNXVIDEO:01/input/input7
[  +0,000051] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[  +0,035437] pps_core: LinuxPPS API ver. 1 registered
[  +0,000001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[  +0,028991] PTP clock support registered
[  +0,036331] tpm_tis 00:09: 1.2 TPM (device-id 0xB, rev-id 16)
[  +0,024617] wmi: Mapper loaded
[  +0,037994] ppdev: user-space parallel port driver
[  +0,038215] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[  +0,000000] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[  +0,000192] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[  +0,100973] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[  +0,000002] tpm tpm0: TPM is disabled/deactivated (0x7)
[  +0,002010] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[  +0,104168] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b4:b5:2f:ca:ca:7f
[  +0,000001] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[  +0,000032] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 0100FF-0FF
[  +0,981080] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[  +0,000006] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  +0,000000] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[  +0,000002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  +0,000000] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20160930/utaddress-247)
[  +0,000002] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[  +0,000001] lpc_ich: Resource conflict(s) found affecting gpio_ich
[  +0,003704] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[  +0,006208] input: HP WMI hotkeys as /devices/virtual/input/input8
[  +0,063471] iTCO_vendor_support: vendor-support=0
[  +0,005455] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[  +0,000030] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[  +0,000089] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[  +0,355667] snd_hda_intel 0000:00:1b.0: enabling device (0100 -> 0102)
[  +0,000240] snd_hda_intel 0000:01:00.1: Disabling MSI
[  +0,000003] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[  +0,124144] snd_hda_codec_realtek hdaudioC0D0: ALC221: SKU not ready 0x411111f0
[  +0,000353] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC221: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[  +0,000000] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x1a
[  +0,000001] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1b
[  +0,009129] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[  +0,000055] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[  +0,000052] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[  +0,000057] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[  +0,526426] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input14
[  +0,000060] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input15
[  +0,000053] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input16
[  +0,000051] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input17
[bře 7 20:47] [drm] Initialized
[  +0,013287] nvidia: loading out-of-tree module taints kernel.
[  +0,000005] nvidia: module license 'NVIDIA' taints kernel.
[  +0,000000] Disabling lock debugging due to kernel taint
[  +0,007990] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[  +0,000217] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[  +0,000003] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.106  Tue Jan  9 15:10:23 PST 2018
[  +1,334732] fuse init (API version 7.26)
[  +0,100211] loop: module loaded
[  +0,124051] device-mapper: uevent: version 1.0.3
[  +0,000198] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
[  +0,170527] EXT4-fs (sda2): re-mounted. Opts: (null)
[  +0,345200] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  +0,197958] Adding 4193276k swap on /dev/sda3.  Priority:-1 extents:1 across:4193276k FS
[ +27,124025] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000021] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000007] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000017] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000006] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000006] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000006] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,000007] ACPI Warning: \_SB.PCI0.PEG0.VGA._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[  +0,514372] NVRM: Your system is not currently configured to drive a VGA console
[  +0,000001] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[  +0,000000] NVRM: requires the use of a text-mode VGA console. Use of other console
[  +0,000001] NVRM: drivers including, but not limited to, vesafb, may result in
[  +0,000000] NVRM: corruption and stability problems, and is not supported.
[bře 7 20:49] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  +0,857760] e1000e: eth0 NIC Link is Down
[  +0,308252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  +0,547570] e1000e: eth0 NIC Link is Down
[  +0,308403] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  +2,992088] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  +0,000039] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  +2,406063] e1000e: eth0 NIC Link is Down
[  +2,867805] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  +2,400144] e1000e: eth0 NIC Link is Down
[  +2,955665] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[  +0,862310] e1000e: eth0 NIC Link is Down
[  +2,733700] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[  +0,000004] e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO