Portál AbcLinuxu, 2. května 2025 05:35
msynctool --sync N70
Synchronizing group "N70"
kbuildsycoca running...
Member 1 of type syncml-obex-client had an error while connecting: Unable to connect to the interface
KWrited - Naslouchá na zařízení /dev/pts/3
Member 2 of type kdepim-sync just connected
Member 2 of type kdepim-sync just disconnected
All clients have disconnected
The sync failed: Unable to connect one of the members
X Error: BadWindow (invalid Window parameter) 3
Major opcode: 7
Minor opcode: 0
Resource id: 0x4800008
Error while synchronizing: Unable to connect one of the members
pjlin:/ # syncml-obex-client -u
Found 2 USB OBEX interfaces
Interface 0:
Manufacturer: Nokia
Product: Nokia N70
Interface description: CDC Comms Interface
Interface 1:
Manufacturer: Nokia
Product: Nokia N70
Interface description: CDC Data Interface
Use '-u interface_number' to connect
pjlin:/ # syncml-obex-client -u 0
Failed to start the client: You have to configure at least one database
pjlin:/ # syncml-obex-client -u 1
Failed to start the client: You have to configure at least one database
Konfigurak N70:<?xml version="1.0"?> <config> <!-- (Only for blue) The bluetooth address if the bluetooth mode is selected --> <bluetooth_address></bluetooth_address> <!-- (Only for blue) The bluetooth channel to use (usualy the 11) [x] --> <bluetooth_channel></bluetooth_channel> <!-- (Only for USB) The usb interface number of the SYNCML-SYNC target. use syncml-obex-client -u (as root!) to find it. --> <interface>0</interface> <!-- The string that the plugin will use to identify itself. Some devices need a special string here. --> <identifier>PC Suite</identifier> <!-- The syncml version to use: 0 for 1.0, 1 for 1.1 and 2 for 1.2 --> <version>1</version> <!-- if the plugin should use wbxml --> <wbxml>1</wbxml> <!-- The username to use. Leave empty to not require a username --> <username></username> <!-- the password for the username --> <password></password> <!-- sets the connection type to use. 5 means obex over usb, 2 means obex over bluetooth --> <type>5</type> <!-- If wbxml is enabled, defines wether the wbxml should use string tables --> <usestringtable>0</usestringtable> <!-- Never send ADD command, but send REPLACE (not needed normally) --> <onlyreplace>0</onlyreplace> <!-- Workaround around for mobile phones which only use local timestamps and _no_ UTC timestamps! --> <onlyLocaltime>0</onlyLocaltime> <!-- Sets the maximum allowed size in bytes of incoming messages (some device need this option set). Example: 10000 -->
mirek@mira-msi:/etc/bluetooth$ msynctool --sync N73 Synchronizing group "N73" The previous synchronization was unclean. Slow-syncing Member 2 of type kdepim-sync just connected Member 1 of type syncml-obex-client had an error while connecting: Request not successfull: 68 Member 2 of type kdepim-sync just disconnected All clients have disconnected The sync failed: Unable to connect one of the members Error synchronizing: Unable to connect one of the members Pipe closed! Exiting. Pipe closed! Exiting.
$hcitool scanzjisteni Channel:
$sdptool browse < mac> #...a najit cislo v oddile Service Name: SyncMLClient
$msynctool --addgroup N73
$msynctool --addmember N73 syncml-obex-client
$msynctool --addmember N73 kdepim-sync
$msynctool --showgroup N73
Groupname: N73
Member 2: kdepim-sync
No Configuration found: This member has no configuration options
Member 1: syncml-obex-client
No Configuration found: Member has not been configured
$msynctool --configure N73 1 #...a zde doplnit mac a channel
< ?xml version="1.0"?>
< config>
< bluetooth_address>01:23:45:67:89:AB< /bluetooth_address>
< bluetooth_channel>10< /bluetooth_channel>
< identifier>PC Suite< /identifier>
< version>1< /version>
< wbxml>1< /wbxml>
< username>< /username>
< password>< /password>
< type>2< /type>
< usestringtable>1< /usestringtable>
< onlyreplace>0< /onlyreplace>
< onlyLocaltime>0< /onlyLocaltime>
< recvLimit>0< /recvLimit>
< maxObjSize>0< /maxObjSize>
< contact_db>Contacts< /contact_db>
< calendar_db>Calendar< /calendar_db>
< note_db>Notes< /note_db>
< /config>
$msynctool --sync N73
Ty mezery za < si odmyslete, nějak mi to sem nejde jinak uložit. Ještě jak jednoduše zálohovat adresář, kalendář a poznámky z aplikace Kontakt. V home mám složku backup a pak k konzoli viz níže a nebo si vytvořit script ( případné vymazání souborů způsobí totální vyčištění Kontakt-u... to se může taky hodit ):
cp .kde/share/apps/korganizer/std.ics backup/std.ics cp .kde/share/apps/knotes/notes.ics backup/notes.ics cp .kde/share/apps/kabc/std.vcf backup/std.vcf
# msynctool --sync N70 # msynctool --discover N70 1# emerge app-pda/libopensync-plugin-vformat # msynctool --sync N70
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.