Bootdata ok (command line is ro root=LABEL=/ rhgb quiet) Linux version 2.6.18-8.el5xen (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:29:35 EST 2007 BIOS-provided physical RAM map: Xen: 0000000000000000 - 00000001f0e19000 (usable) On node 0 totalpages: 2035225 DMA zone: 2035225 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v002 DELL ) @ 0x00000000000f25d0 ACPI: XSDT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2650 ACPI: FADT (v003 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f2758 ACPI: MADT (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f284c ACPI: SPCR (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f292d ACPI: HPET (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f297d ACPI: MCFG (v001 DELL PE_SC3 0x00000001 DELL 0x00000001) @ 0x00000000000f29b5 ACPI: DSDT (v001 DELL PE_SC3 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] disabled) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfec80000] gsi_base[32]) IOAPIC[1]: apic_id 5, version 32, address 0xfec80000, GSI 32-55 ACPI: IOAPIC (id[0x06] address[0xfec83000] gsi_base[128]) IOAPIC[2]: apic_id 6, version 32, address 0xfec83000, GSI 128-151 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to xen Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists. Total pages: 2035225 Kernel command line: ro root=LABEL=/ rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 2327.542 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB enabled: Aperture: 64 megabytes Kernel range: 0xffff88000aa3a000 - 0xffff88000ea3a000 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Memory: 7900912k/8140900k available (2321k kernel code, 231060k reserved, 1312k data, 168k init) Calibrating delay using timer specific routine.. 5820.68 BogoMIPS (lpj=11641369) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 (SMP-)alternatives turned off ACPI: Core revision 20060707 Initializing CPU#1 Initializing CPU#2 Brought up 4 CPUs sizeof(vma)=168 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=216 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=96 bytes sizeof(skbuff)=240 bytes Initializing CPU#3 migration_cost=14 checking if image is initramfs... it is Grant table initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Dell PowerEdge 2900 detected, enabling pci=bfsort. PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 Boot video device is 0000:10:0d.0 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.UPST.DWN2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2.PE2X._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5.PE2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 *5 6 7 10 11 12) ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 5 6 7 *10 11 12) ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 6 7 10 *11 12) ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LK07] (IRQs 3 4 5 6 7 10 11 12) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices xen_mem: Initialising balloon driver. usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default pnp: 00:08: ioport range 0x800-0x87f could not be reserved pnp: 00:08: ioport range 0x880-0x8bf has been reserved pnp: 00:08: ioport range 0x8c0-0x8df has been reserved pnp: 00:08: ioport range 0x8e0-0x8e3 has been reserved pnp: 00:08: ioport range 0xc00-0xc7f has been reserved pnp: 00:08: ioport range 0xca0-0xca7 has been reserved pnp: 00:08: ioport range 0xca9-0xcab has been reserved pnp: 00:08: ioport range 0xcad-0xcaf has been reserved pnp: 00:09: ioport range 0xca8-0xca8 has been reserved pnp: 00:09: ioport range 0xcac-0xcac has been reserved PCI: Bridge: 0000:08:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:07:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:07:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:06:00.0 IO window: disabled. MEM window: f4000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:06:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: f2000000-f7ffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:01:00.0 IO window: disabled. MEM window: fc400000-fc5fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:01:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: fc300000-fc5fffff PREFETCH window: d8000000-d80fffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: f8000000-fbffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: fc100000-fc2fffff PREFETCH window: d0000000-d7ffffff GSI 16 sharing vector 0xA0 and IRQ 16 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:06:00.0 to 64 ACPI: PCI Interrupt 0000:07:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:00.0 to 64 PCI: Setting latency timer of device 0000:08:00.0 to 64 ACPI: PCI Interrupt 0000:07:01.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:07:01.0 to 64 PCI: Setting latency timer of device 0000:06:00.3 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:03.0 to 64 ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:04.0 to 64 ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:01:00.0 to 64 PCI: Setting latency timer of device 0000:01:00.2 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered IA-32 Microcode Update Driver: v1.14-xen audit: initializing netlink socket (disabled) audit(1265693641.016:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 6E92D7462CAE45D - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PCI: Setting latency timer of device 0000:06:00.0 to 64 Allocate Port Service[0000:06:00.0:pcie10] PCI: Setting latency timer of device 0000:07:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:00.0:pcie20] PCI: Setting latency timer of device 0000:07:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:07:01.0:pcie20] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x5 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x6 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x7 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x8 Real Time Clock Driver v1.12ac hpet_acpi_add: no address or irqs in _CRS Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize Xen virtual console successfully installed as ttyS0 Event-channel device installed. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ESB2: IDE controller at PCI slot 0000:00:1f.1 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16 ESB2: chipset revision 9 ESB2: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio Probing IDE interface ide0... hda: TSSTcorpDVD-ROM TS-H352C, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: No PS/2 controller found. Probing ports directly. serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Write protecting the kernel read-only data: 439k USB Universal Host Controller Interface driver v3.0 GSI 17 sharing vector 0xA8 and IRQ 17 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000dce0 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected GSI 18 sharing vector 0xB0 and IRQ 18 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000dcc0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000dca0 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 20 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 18, io base 0x0000dc80 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 17, io mem 0xfc600400 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected usb 2-2: new low speed USB device using uhci_hcd and address 2 SCSI subsystem initialized megasas: 00.00.03.05 Mon Oct 02 11:21:32 PDT 2006 megasas: 0x1028:0x0015:0x1028:0x1f03: bus 2:slot 14:func 0 GSI 19 sharing vector 0xB8 and IRQ 19 ACPI: PCI Interrupt 0000:02:0e.0[A] -> GSI 142 (level, low) -> IRQ 19 megasas: FW now in Ready state scsi0 : LSI Logic SAS based MegaRAID driver Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: SEAGATE Model: ST3146855SS Rev: S515 Type: Direct-Access ANSI SCSI revision: 05 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Vendor: DELL Model: PERC 5/i Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB) sda: Write Protect is off sda: Mode Sense: 1f 00 10 08 SCSI device sda: drive cache: write through w/ FUA SCSI device sda: 285474816 512-byte hdwr sectors (146163 MB) sda: Write Protect is off sda: Mode Sense: 1f 00 10 08 SCSI device sda: drive cache: write through w/ FUA sda: sda1 sd 0:2:0:0: Attached scsi disk sda Vendor: DELL Model: PERC 5/i Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB) sdb: Write Protect is off sdb: Mode Sense: 1f 00 10 08 SCSI device sdb: drive cache: write through w/ FUA SCSI device sdb: 570949632 512-byte hdwr sectors (292326 MB) sdb: Write Protect is off sdb: Mode Sense: 1f 00 10 08 SCSI device sdb: drive cache: write through w/ FUA sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 sdb14 > sd 0:2:1:0: Attached scsi disk sdb usb 5-7: new high speed USB device using ehci_hcd and address 4 usb 5-7: configuration #1 chosen from 1 choice hub 5-7:1.0: USB hub found hub 5-7:1.0: 4 ports detected usb 2-2: new low speed USB device using uhci_hcd and address 3 usb 2-2: configuration #1 chosen from 1 choice input: Dell Dell USB Keyboard as /class/input/input0 input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.1-2 usb 3-1: new full speed USB device using uhci_hcd and address 2 usb 3-1: configuration #1 chosen from 1 choice kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1265693646.728:2): selinux=0 auid=4294967295 hda: ATAPI 48X DVD-ROM drive, 256kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.44-1 (August 10, 2006) ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 16, node addr 001c23c80a2e ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 16 (level, low) -> IRQ 16 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 001c23c80a30 usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial support registered for generic usbcore: registered new driver usbserial_generic drivers/usb/serial/usb-serial.c: USB Serial Driver core Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled intel_rng: FWH not detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device ftdi_sio 3-1:1.0: FTDI USB Serial Device converter detected drivers/usb/serial/ftdi_sio.c: Detected FT232BM usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0 usbcore: registered new driver ftdi_sio drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port input: PC Speaker as /class/input/input1 scsi 0:0:10:0: Attached scsi generic sg0 type 13 sd 0:2:0:0: Attached scsi generic sg1 type 0 sd 0:2:1:0: Attached scsi generic sg2 type 0 8250_pnp: Unknown symbol serial8250_unregister_port 8250_pnp: Unknown symbol serial8250_register_port Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 lp: driver loaded but no devices found ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com EXT3 FS on sdb12, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sdb1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb3, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb14, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb2, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb11, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb10, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sdb13, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 8385888k swap on /dev/sdb8. Priority:-1 extents:1 across:8385888k NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead. ADDRCONF(NETDEV_UP): eth0: link is not ready bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth1: link is not ready audit(1265693663.438:3): audit_pid=2471 old=0 by auid=4294967295 Bluetooth: Core ver 2.10 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 eth0: no IPv6 routers present Bluetooth: HIDP (Human Interface Emulation) ver 1.1 Bridge firewalling registered