[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-30) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed Jan 12 04:01:41 UTC 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable) [ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-through [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BFF00000 mask FFFF00000 write-through [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 01800000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037000000 page 2M [ 0.000000] 0037000000 - 00373fe000 page 4k [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 377d0000 - 37feff90 [ 0.000000] Allocated new RAMDISK: 00100000 - 0091ff90 [ 0.000000] Move RAMDISK from 00000000377d0000 - 0000000037feff8f to 00100000 - 0091ff8f [ 0.000000] ACPI: RSDP 000f9150 00014 (v00 IntelR) [ 0.000000] ACPI: RSDT bfee3040 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: FACP bfee30c0 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: DSDT bfee3180 04E92 (v01 INTELR AWRDACPI 00001000 MSFT 0100000E) [ 0.000000] ACPI: FACS bfee0000 00040 [ 0.000000] ACPI: _HPT bfee8180 00038 (v01 IntelR AWRDACPI 42302E31 AWRD 00000098) [ 0.000000] ACPI: MCFG bfee8200 0003C (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: APIC bfee8080 00084 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000) [ 0.000000] ACPI: SSDT bfee8280 001EF (v01 PmRef Cpu0Ist 00003000 INTL 20041203) [ 0.000000] ACPI: SSDT bfee87e0 002F9 (v01 PmRef CpuPm 00003000 INTL 20041203) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2186MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 0 - 373fe000 [ 0.000000] node 0 low ram: 00000000 - 373fe000 [ 0.000000] node 0 bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0001000000 - 00014c9bb4] TEXT DATA BSS ==> [0001000000 - 00014c9bb4] [ 0.000000] #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #5 [00014ca000 - 00014d00ce] BRK ==> [00014ca000 - 00014d00ce] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000100000 - 000091ff90] NEW RAMDISK ==> [0000100000 - 000091ff90] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00f4fa0] f4fa0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x000bfee0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bfee0 [ 0.000000] On node 0 totalpages: 786031 [ 0.000000] free_area_init_node: node 0, pgdat c13b2860, node_mem_map c14d2200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4374 pages used for memmap [ 0.000000] HighMem zone: 555468 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:20100000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages/cpu @c3000000 s34296 r0 d23048 u1048576 [ 0.000000] pcpu-alloc: s34296 r0 d23048 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779889 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=b83544fa-01e7-416c-875d-17d13691c0eb ro quiet [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000373fe:000bfee0) [ 0.000000] Memory: 3104012k/3144576k available (2501k kernel code, 38940k reserved, 1323k data, 376k init, 2239368k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB) [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.000000] .init : 0xc13bd000 - 0xc141b000 ( 376 kB) [ 0.000000] .data : 0xc12716a1 - 0xc13bc460 (1323 kB) [ 0.000000] .text : 0xc1000000 - 0xc12716a1 (2501 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:1280 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2402.591 MHz processor. [ 0.004006] Calibrating delay loop (skipped), value calculated using timer frequency.. 4805.18 BogoMIPS (lpj=9610364) [ 0.004019] Security Framework initialized [ 0.004025] SELinux: Disabled at boot. [ 0.004031] Mount-cache hash table entries: 512 [ 0.004144] Initializing cgroup subsys ns [ 0.004147] Initializing cgroup subsys cpuacct [ 0.004151] Initializing cgroup subsys devices [ 0.004153] Initializing cgroup subsys freezer [ 0.004155] Initializing cgroup subsys net_cls [ 0.004176] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004178] CPU: L2 cache: 4096K [ 0.004180] CPU: Physical Processor ID: 0 [ 0.004181] CPU: Processor Core ID: 0 [ 0.004184] mce: CPU supports 6 MCE banks [ 0.004191] CPU0: Thermal monitoring enabled (TM1) [ 0.004195] using mwait in idle threads. [ 0.004201] Performance Events: Core2 events, Intel PMU driver. [ 0.004207] ... version: 2 [ 0.004208] ... bit width: 40 [ 0.004210] ... generic registers: 2 [ 0.004211] ... value mask: 000000ffffffffff [ 0.004213] ... max period: 000000007fffffff [ 0.004214] ... fixed-purpose events: 3 [ 0.004215] ... event mask: 0000000700000003 [ 0.004219] Checking 'hlt' instruction... OK. [ 0.021003] ACPI: Core revision 20090903 [ 0.028071] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.028442] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.069933] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.072001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 4096K [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.156112] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.156119] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.160046] Brought up 2 CPUs [ 0.160048] Total of 2 processors activated (9770.58 BogoMIPS). [ 0.164026] CPU0 attaching sched-domain: [ 0.164030] domain 0: span 0-1 level MC [ 0.164032] groups: 0 1 [ 0.164036] CPU1 attaching sched-domain: [ 0.164038] domain 0: span 0-1 level MC [ 0.164040] groups: 1 0 [ 0.164091] devtmpfs: initialized [ 0.164184] regulator: core version 0.5 [ 0.164184] NET: Registered protocol family 16 [ 0.164184] ACPI: bus type pci registered [ 0.164187] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.164189] PCI: MCFG area at e0000000 reserved in E820 [ 0.164191] PCI: Using MMCONFIG for extended config space [ 0.164193] PCI: Using configuration type 1 for base access [ 0.164229] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.164230] mtrr: probably your BIOS does not setup all CPUs. [ 0.164232] mtrr: corrected configuration. [ 0.164454] bio: create slab at 0 [ 0.164454] ACPI: EC: Detected MSI hardware, enabling workarounds. [ 0.164454] ACPI: EC: Look up EC in DSDT [ 0.170843] ACPI: Interpreter enabled [ 0.170851] ACPI: (supports S0 S1 S4 S5) [ 0.170870] ACPI: Using IOAPIC for interrupt routing [ 0.175042] ACPI: No dock devices found. [ 0.175119] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.175207] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.175210] pci 0000:00:01.0: PME# disabled [ 0.175275] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfdff8000-0xfdffbfff] [ 0.175320] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.175324] pci 0000:00:1b.0: PME# disabled [ 0.175391] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.175395] pci 0000:00:1c.0: PME# disabled [ 0.175464] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.175468] pci 0000:00:1c.1: PME# disabled [ 0.175541] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.175545] pci 0000:00:1c.5: PME# disabled [ 0.175591] pci 0000:00:1d.0: reg 20 io port: [0xff00-0xff1f] [ 0.175639] pci 0000:00:1d.1: reg 20 io port: [0xfe00-0xfe1f] [ 0.175687] pci 0000:00:1d.2: reg 20 io port: [0xfd00-0xfd1f] [ 0.175735] pci 0000:00:1d.3: reg 20 io port: [0xfc00-0xfc1f] [ 0.175780] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfdfff000-0xfdfff3ff] [ 0.175823] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.175827] pci 0000:00:1d.7: PME# disabled [ 0.176001] pci 0000:00:1f.2: reg 10 io port: [0x00-0x07] [ 0.176001] pci 0000:00:1f.2: reg 14 io port: [0x00-0x03] [ 0.176001] pci 0000:00:1f.2: reg 18 io port: [0x00-0x07] [ 0.176001] pci 0000:00:1f.2: reg 1c io port: [0x00-0x03] [ 0.176001] pci 0000:00:1f.2: reg 20 io port: [0xfb00-0xfb0f] [ 0.176001] pci 0000:00:1f.2: PME# supported from D3hot [ 0.176001] pci 0000:00:1f.2: PME# disabled [ 0.176001] pci 0000:00:1f.3: reg 20 io port: [0x500-0x51f] [ 0.176035] pci 0000:01:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff] [ 0.176043] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.176051] pci 0000:01:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] [ 0.176056] pci 0000:01:00.0: reg 24 io port: [0xbf00-0xbf7f] [ 0.176061] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff] [ 0.176091] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176144] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff] [ 0.176147] pci 0000:00:01.0: bridge 32bit mmio: [0xf8000000-0xfbffffff] [ 0.176151] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.176195] pci 0000:00:1c.0: bridge io port: [0xa000-0xafff] [ 0.176199] pci 0000:00:1c.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff] [ 0.176205] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xfd600000-0xfd6fffff] [ 0.176305] pci 0000:03:00.0: reg 24 32bit mmio: [0xfdefe000-0xfdefffff] [ 0.176348] pci 0000:03:00.0: PME# supported from D3hot [ 0.176353] pci 0000:03:00.0: PME# disabled [ 0.176412] pci 0000:03:00.1: reg 10 io port: [0xef00-0xef07] [ 0.176422] pci 0000:03:00.1: reg 14 io port: [0xee00-0xee03] [ 0.176432] pci 0000:03:00.1: reg 18 io port: [0xed00-0xed07] [ 0.176442] pci 0000:03:00.1: reg 1c io port: [0xec00-0xec03] [ 0.176451] pci 0000:03:00.1: reg 20 io port: [0xeb00-0xeb0f] [ 0.176529] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176608] pci 0000:00:1c.1: bridge io port: [0xe000-0xefff] [ 0.176612] pci 0000:00:1c.1: bridge 32bit mmio: [0xfde00000-0xfdefffff] [ 0.176618] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xfdd00000-0xfddfffff] [ 0.176689] pci 0000:04:00.0: reg 10 32bit mmio: [0xfdce0000-0xfdcfffff] [ 0.176701] pci 0000:04:00.0: reg 14 32bit mmio: [0xfdb00000-0xfdbfffff] [ 0.176713] pci 0000:04:00.0: reg 18 io port: [0xdf00-0xdf1f] [ 0.176807] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold [ 0.176814] pci 0000:04:00.0: PME# disabled [ 0.176863] pci 0000:04:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.176950] pci 0000:00:1c.5: bridge io port: [0xd000-0xdfff] [ 0.176954] pci 0000:00:1c.5: bridge 32bit mmio: [0xfdb00000-0xfdcfffff] [ 0.176960] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xfda00000-0xfdafffff] [ 0.177013] pci 0000:00:1e.0: transparent bridge [ 0.177016] pci 0000:00:1e.0: bridge io port: [0xc000-0xcfff] [ 0.177020] pci 0000:00:1e.0: bridge 32bit mmio: [0xfd800000-0xfd8fffff] [ 0.177027] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xfd700000-0xfd7fffff] [ 0.177048] pci_bus 0000:00: on NUMA node 0 [ 0.177052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.177206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.177259] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.177325] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] [ 0.177379] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 0.185984] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 0.186075] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 0.186163] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.186251] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 0.186339] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.186428] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.186517] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 0.186606] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 0.186696] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.186699] vgaarb: loaded [ 0.186714] PCI: Using ACPI for IRQ routing [ 0.186714] Switching to clocksource tsc [ 0.186714] pnp: PnP ACPI init [ 0.186714] ACPI: bus type pnp registered [ 0.187595] pnp: PnP ACPI: found 15 devices [ 0.187597] ACPI: ACPI bus type pnp unregistered [ 0.187601] PnPBIOS: Disabled by ACPI PNP [ 0.187609] system 00:01: ioport range 0xb78-0xb7b has been reserved [ 0.187611] system 00:01: ioport range 0xf78-0xf7b has been reserved [ 0.187614] system 00:01: ioport range 0xa78-0xa7b has been reserved [ 0.187616] system 00:01: ioport range 0xe78-0xe7b has been reserved [ 0.187619] system 00:01: ioport range 0xbbc-0xbbf has been reserved [ 0.187621] system 00:01: ioport range 0xfbc-0xfbf has been reserved [ 0.187624] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.187626] system 00:01: ioport range 0x294-0x297 has been reserved [ 0.187629] system 00:01: ioport range 0x800-0x87f has been reserved [ 0.187631] system 00:01: ioport range 0x880-0x88f has been reserved [ 0.187638] system 00:0b: ioport range 0x400-0x4bf has been reserved [ 0.187643] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved [ 0.187648] system 00:0e: iomem range 0xf0000-0xfffff could not be reserved [ 0.187651] system 00:0e: iomem range 0xfed00000-0xfed000ff has been reserved [ 0.187654] system 00:0e: iomem range 0xbfee0000-0xbfefffff could not be reserved [ 0.187656] system 00:0e: iomem range 0x0-0x9ffff could not be reserved [ 0.187659] system 00:0e: iomem range 0x100000-0xbfedffff could not be reserved [ 0.187662] system 00:0e: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.187665] system 00:0e: iomem range 0xfed13000-0xfed1dfff has been reserved [ 0.187667] system 00:0e: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.187670] system 00:0e: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.187672] system 00:0e: iomem range 0xffb00000-0xffb7ffff has been reserved [ 0.187675] system 00:0e: iomem range 0xfff00000-0xffffffff has been reserved [ 0.187678] system 00:0e: iomem range 0xe0000-0xeffff has been reserved [ 0.223523] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.223526] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.223529] pci 0000:00:01.0: MEM window: 0xf8000000-0xfbffffff [ 0.223532] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.223536] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.223539] pci 0000:00:1c.0: IO window: 0xa000-0xafff [ 0.223544] pci 0000:00:1c.0: MEM window: 0xfd900000-0xfd9fffff [ 0.223549] pci 0000:00:1c.0: PREFETCH window: 0x000000fd600000-0x000000fd6fffff [ 0.223555] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.223558] pci 0000:00:1c.1: IO window: 0xe000-0xefff [ 0.223563] pci 0000:00:1c.1: MEM window: 0xfde00000-0xfdefffff [ 0.223567] pci 0000:00:1c.1: PREFETCH window: 0x000000fdd00000-0x000000fddfffff [ 0.223574] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:04 [ 0.223577] pci 0000:00:1c.5: IO window: 0xd000-0xdfff [ 0.223582] pci 0000:00:1c.5: MEM window: 0xfdb00000-0xfdcfffff [ 0.223586] pci 0000:00:1c.5: PREFETCH window: 0x000000fda00000-0x000000fdafffff [ 0.223592] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05 [ 0.223595] pci 0000:00:1e.0: IO window: 0xc000-0xcfff [ 0.223600] pci 0000:00:1e.0: MEM window: 0xfd800000-0xfd8fffff [ 0.223604] pci 0000:00:1e.0: PREFETCH window: 0x000000fd700000-0x000000fd7fffff [ 0.223617] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.223620] pci 0000:00:01.0: setting latency timer to 64 [ 0.223627] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.223631] pci 0000:00:1c.0: setting latency timer to 64 [ 0.223640] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.223644] pci 0000:00:1c.1: setting latency timer to 64 [ 0.223652] pci 0000:00:1c.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.223656] pci 0000:00:1c.5: setting latency timer to 64 [ 0.223662] pci 0000:00:1e.0: setting latency timer to 64 [ 0.223666] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.223668] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.223671] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.223673] pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbffffff] [ 0.223675] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.223677] pci_bus 0000:02: resource 0 io: [0xa000-0xafff] [ 0.223679] pci_bus 0000:02: resource 1 mem: [0xfd900000-0xfd9fffff] [ 0.223682] pci_bus 0000:02: resource 2 pref mem [0xfd600000-0xfd6fffff] [ 0.223684] pci_bus 0000:03: resource 0 io: [0xe000-0xefff] [ 0.223686] pci_bus 0000:03: resource 1 mem: [0xfde00000-0xfdefffff] [ 0.223688] pci_bus 0000:03: resource 2 pref mem [0xfdd00000-0xfddfffff] [ 0.223690] pci_bus 0000:04: resource 0 io: [0xd000-0xdfff] [ 0.223692] pci_bus 0000:04: resource 1 mem: [0xfdb00000-0xfdcfffff] [ 0.223695] pci_bus 0000:04: resource 2 pref mem [0xfda00000-0xfdafffff] [ 0.223697] pci_bus 0000:05: resource 0 io: [0xc000-0xcfff] [ 0.223699] pci_bus 0000:05: resource 1 mem: [0xfd800000-0xfd8fffff] [ 0.223701] pci_bus 0000:05: resource 2 pref mem [0xfd700000-0xfd7fffff] [ 0.223704] pci_bus 0000:05: resource 3 io: [0x00-0xffff] [ 0.223706] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff] [ 0.223728] NET: Registered protocol family 2 [ 0.223793] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.224009] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.224327] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.224492] TCP: Hash tables configured (established 131072 bind 65536) [ 0.224495] TCP reno registered [ 0.224549] NET: Registered protocol family 1 [ 0.224647] pci 0000:01:00.0: Boot video device [ 0.224689] Unpacking initramfs... [ 0.419946] Freeing initrd memory: 8319k freed [ 0.423350] audit: initializing netlink socket (disabled) [ 0.423365] type=2000 audit(1299447709.420:1): initialized [ 0.426289] highmem bounce pool size: 64 pages [ 0.426293] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.427436] VFS: Disk quotas dquot_6.5.2 [ 0.427480] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.427543] msgmni has been set to 1707 [ 0.427739] alg: No test for stdrng (krng) [ 0.427784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.427787] io scheduler noop registered [ 0.427789] io scheduler anticipatory registered [ 0.427790] io scheduler deadline registered [ 0.427818] io scheduler cfq registered (default) [ 0.427918] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.427923] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.428018] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.428026] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.428141] pcieport 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.428149] pcieport 0000:00:1c.1: setting latency timer to 64 [ 0.428269] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.428277] pcieport 0000:00:1c.5: setting latency timer to 64 [ 0.428431] isapnp: Scanning for PnP cards... [ 0.793375] isapnp: No Plug & Play device found [ 0.794387] Linux agpgart interface v0.103 [ 0.794484] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.794584] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.794884] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.795054] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.797944] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.797949] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.797995] mice: PS/2 mouse device common for all mice [ 0.798044] rtc_cmos 00:03: RTC can wake from S4 [ 0.798069] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.798094] rtc0: alarms up to one month, 242 bytes nvram [ 0.798105] cpuidle: using governor ladder [ 0.798107] cpuidle: using governor menu [ 0.798110] No iBFT detected. [ 0.798377] TCP cubic registered [ 0.798487] NET: Registered protocol family 10 [ 0.798845] lo: Disabled Privacy Extensions [ 0.799096] Mobile IPv6 [ 0.799098] NET: Registered protocol family 17 [ 0.799111] Using IPI No-Shortcut mode [ 0.799162] PM: Resume from disk failed. [ 0.799170] registered taskstats version 1 [ 0.799508] rtc_cmos 00:03: setting system clock to 2011-03-06 21:41:50 UTC (1299447710) [ 0.799531] Initalizing network drop monitor service [ 0.799552] Freeing unused kernel memory: 376k freed [ 0.799707] Write protecting the kernel text: 2504k [ 0.799725] Write protecting the kernel read-only data: 920k [ 0.812512] udev[56]: starting version 164 [ 0.826615] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 0.893266] usbcore: registered new interface driver usbfs [ 0.893381] usbcore: registered new interface driver hub [ 0.893496] usbcore: registered new device driver usb [ 0.895884] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.895890] ACPI: Thermal Zone [THRM] (42 C) [ 0.897479] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.897509] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.897523] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.897526] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.897839] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.897854] ehci_hcd 0000:00:1d.7: using broken periodic workaround [ 0.901734] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.901747] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdfff000 [ 0.909965] SCSI subsystem initialized [ 0.920422] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.920441] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.920443] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.920445] usb usb1: Product: EHCI Host Controller [ 0.920447] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd [ 0.920449] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.920514] usb usb1: configuration #1 chosen from 1 choice [ 0.920538] hub 1-0:1.0: USB hub found [ 0.920544] hub 1-0:1.0: 8 ports detected [ 0.924599] libata version 3.00 loaded. [ 0.927209] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.927211] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.927263] e1000e 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.927298] e1000e 0000:04:00.0: setting latency timer to 64 [ 0.927459] e1000e 0000:04:00.0: irq 28 for MSI/MSI-X [ 0.928922] ata_piix 0000:00:1f.2: version 2.13 [ 0.928937] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.928940] ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ] [ 0.928971] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.929781] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001) [ 0.929788] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18 [ 0.929813] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 0.929865] scsi0 : ata_piix [ 0.931328] uhci_hcd: USB Universal Host Controller Interface driver [ 0.931537] scsi2 : ata_piix [ 0.931762] scsi1 : pata_jmicron [ 0.931846] scsi3 : pata_jmicron [ 0.931878] ata3: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 18 [ 0.931880] ata4: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 18 [ 0.932110] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfb00 irq 14 [ 0.932113] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfb08 irq 15 [ 0.932175] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.932181] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.932184] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.932192] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.932215] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff00 [ 0.932246] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.932248] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932250] usb usb2: Product: UHCI Host Controller [ 0.932252] usb usb2: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 0.932253] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.932310] usb usb2: configuration #1 chosen from 1 choice [ 0.932333] hub 2-0:1.0: USB hub found [ 0.932339] hub 2-0:1.0: 2 ports detected [ 0.932383] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.932388] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.932391] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.932396] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.932426] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fe00 [ 0.932452] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.932454] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932456] usb usb3: Product: UHCI Host Controller [ 0.932458] usb usb3: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 0.932460] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.932505] usb usb3: configuration #1 chosen from 1 choice [ 0.932528] hub 3-0:1.0: USB hub found [ 0.932533] hub 3-0:1.0: 2 ports detected [ 0.932571] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.932576] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.932579] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.932585] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.932607] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fd00 [ 0.932635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.932637] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932639] usb usb4: Product: UHCI Host Controller [ 0.932641] usb usb4: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 0.932643] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.932684] usb usb4: configuration #1 chosen from 1 choice [ 0.932709] hub 4-0:1.0: USB hub found [ 0.932709] hub 4-0:1.0: 2 ports detected [ 0.932709] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.932709] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.932709] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.932777] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.932777] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fc00 [ 0.932849] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.932851] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.932853] usb usb5: Product: UHCI Host Controller [ 0.932855] usb usb5: Manufacturer: Linux 2.6.32-5-686 uhci_hcd [ 0.932857] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.932905] usb usb5: configuration #1 chosen from 1 choice [ 0.932927] hub 5-0:1.0: USB hub found [ 0.932932] hub 5-0:1.0: 2 ports detected [ 0.935698] ahci 0000:03:00.0: version 3.0 [ 0.935712] ahci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.935744] ahci 0000:03:00.0: JMB361 has only one port, port_map 0x3 -> 0x1 [ 0.935981] fan PNP0C0B:00: registered as cooling_device0 [ 0.935985] ACPI: Fan [FAN] (on) [ 0.945390] FDC 0 is a post-1991 82077 [ 0.950041] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode [ 0.950046] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.950053] ahci 0000:03:00.0: setting latency timer to 64 [ 0.950158] scsi4 : ahci [ 0.950206] scsi5 : ahci [ 0.950281] ata5: SATA max UDMA/133 abar m8192@0xfdefe000 port 0xfdefe100 irq 17 [ 0.950284] ata6: DUMMY [ 1.046148] 0000:04:00.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:16:17:be:23:4b [ 1.046150] 0000:04:00.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.046164] 0000:04:00.0: eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff [ 1.104505] ata1.01: ATAPI: ATAPI DVD DD 2X16X4X16, M1.6, max UDMA/33 [ 1.120623] ata2.00: ATA-7: WDC WD3200KS-00PFB0, 21.00M21, max UDMA/133 [ 1.120628] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/1) [ 1.125215] ata1.01: configured for UDMA/33 [ 1.137661] ata2.00: configured for UDMA/133 [ 1.233969] scsi 0:0:1:0: CD-ROM ATAPI DVD DD 2X16X4X16 M1.6 PQ: 0 ANSI: 5 [ 1.234159] scsi 2:0:0:0: Direct-Access ATA WDC WD3200KS-00P 21.0 PQ: 0 ANSI: 5 [ 1.416731] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.418739] ata5.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133 [ 1.418743] ata5.00: 145226112 sectors, multi 0: LBA48 NCQ (not used) [ 1.421370] ata5.00: configured for UDMA/133 [ 1.436248] scsi 4:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5 [ 1.444087] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.444137] sd 2:0:0:0: [sda] Write Protect is off [ 1.444140] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.444146] sd 4:0:0:0: [sdb] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB) [ 1.444160] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.444191] sd 4:0:0:0: [sdb] Write Protect is off [ 1.444194] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.444214] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.444294] sda: [ 1.444404] sdb: sda1 sda2 [ 1.445805] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.450245] sdb1 sdb2 < sdb5 > [ 1.459558] sd 4:0:0:0: [sdb] Attached SCSI disk [ 1.469140] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.469142] Uniform CD-ROM driver Revision: 3.20 [ 1.469208] sr 0:0:1:0: Attached scsi CD-ROM sr0 [ 1.473167] sr 0:0:1:0: Attached scsi generic sg0 type 5 [ 1.473220] sd 2:0:0:0: Attached scsi generic sg1 type 0 [ 1.473313] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 1.790740] PM: Starting manual resume from disk [ 1.790743] PM: Resume from partition 8:21 [ 1.790745] PM: Checking hibernation image. [ 1.790829] PM: Error -22 checking image file [ 1.790832] PM: Resume from disk failed. [ 1.811786] kjournald starting. Commit interval 5 seconds [ 1.811797] EXT3-fs: mounted filesystem with ordered data mode. [ 2.484049] udev[342]: starting version 164 [ 2.650809] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 2.673312] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.673319] ACPI: Power Button [PWRB] [ 2.673377] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.673380] ACPI: Power Button [PWRF] [ 2.673841] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU0._PDC] (Node f6c17408), AE_ALREADY_EXISTS [ 2.673850] ACPI: Marking method _PDC as Serialized because of AE_ALREADY_EXISTS error [ 2.673905] processor LNXCPU:00: registered as cooling_device1 [ 2.674071] ACPI: SSDT bfee8710 000CE (v01 PmRef Cpu1Ist 00003000 INTL 20041203) [ 2.674215] processor LNXCPU:01: registered as cooling_device2 [ 2.793716] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.808209] EDAC MC: Ver: 2.1.0 Jan 12 2011 [ 2.809168] EDAC i82975x: ECC disabled on both channels. [ 2.965905] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.965925] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 3.084139] hda_codec: ALC882: BIOS auto-probing. [ 3.085438] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4 [ 3.127920] [drm] Initialized drm 1.1.0 20060810 [ 3.166610] parport_pc 00:08: reported by Plug and Play ACPI [ 3.166668] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 3.218479] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.218484] nouveau 0000:01:00.0: setting latency timer to 64 [ 3.219744] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x450300a3) [ 3.220578] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 3.277597] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 3.277600] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 3.277602] [drm] nouveau 0000:01:00.0: Bios version 60.80.18.00 [ 3.277605] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 3.277608] [drm] nouveau 0000:01:00.0: BIT table 'd' not found [ 3.277610] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 3.277613] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 14 2 [ 3.277615] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 3.277618] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08 [ 3.277620] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff [ 3.277623] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff [ 3.277625] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff [ 3.277627] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 04000320 00000028 [ 3.277630] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000322 00000030 [ 3.277632] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02011310 00000028 [ 3.277634] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00000030 [ 3.277636] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c1c020 [ 3.277645] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBFB4 [ 3.315879] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC1BF [ 3.348695] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD37B [ 3.348704] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD46A [ 3.356762] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD621 [ 3.356764] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD686 [ 3.380696] [drm] nouveau 0000:01:00.0: 0xD686: Condition still not met after 20ms, skipping following opcodes [ 3.380720] [drm] nouveau 0000:01:00.0: 0xB284: parsing output script 0 [ 3.380724] [drm] nouveau 0000:01:00.0: 0xB284: parsing output script 0 [ 3.380728] [drm] nouveau 0000:01:00.0: 0xA8FA: parsing output script 0 [ 3.418716] input: ImPS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input5 [ 3.467039] [TTM] Zone kernel: Available graphics memory: 437256 kiB. [ 3.467041] [TTM] Zone highmem: Available graphics memory: 1556940 kiB. [ 3.467049] [drm] nouveau 0000:01:00.0: 320 MiB VRAM [ 3.486921] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 3.487980] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 3.492201] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 3.492716] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.492719] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.492721] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 3.492723] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 3.492725] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown [ 3.492728] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.492773] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 3.674570] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo f677ba00 [ 3.676503] [drm] nouveau 0000:01:00.0: 0x0FA9: parsing clock script 0 [ 3.678146] Console: switching to colour frame buffer device 160x64 [ 3.681466] fb0: nouveaufb frame buffer device [ 3.681468] registered panic notifier [ 3.681472] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0 [ 4.065260] Adding 2988024k swap on /dev/sdb5. Priority:-1 extents:1 across:2988024k [ 4.171926] EXT3 FS on sdb1, internal journal [ 4.236611] loop: module loaded [ 4.442557] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 4.966787] fuse init (API version 7.13) [ 7.056376] e1000e 0000:04:00.0: irq 28 for MSI/MSI-X [ 7.112226] e1000e 0000:04:00.0: irq 28 for MSI/MSI-X [ 7.112865] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 7.958424] [drm] nouveau 0000:01:00.0: PFIFO_INTR 0x00000010 - Ch 1 [ 7.979182] Bluetooth: Core ver 2.15 [ 7.979225] NET: Registered protocol family 31 [ 7.979228] Bluetooth: HCI device and connection manager initialized [ 7.979231] Bluetooth: HCI socket layer initialized [ 8.061649] Bluetooth: L2CAP ver 2.14 [ 8.061651] Bluetooth: L2CAP socket layer initialized [ 8.201441] Bluetooth: RFCOMM TTY layer initialized [ 8.201446] Bluetooth: RFCOMM socket layer initialized [ 8.201448] Bluetooth: RFCOMM ver 1.11 [ 8.243155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 8.243158] Bluetooth: BNEP filters: protocol multicast [ 8.287339] Bridge firewalling registered [ 8.393718] Bluetooth: SCO (Voice Link) ver 0.6 [ 8.393721] Bluetooth: SCO socket layer initialized [ 8.718664] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 8.718667] 0000:04:00.0: eth0: 10/100 speed: disabling TSO [ 8.718918] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 8.834197] [drm] nouveau 0000:01:00.0: Allocating FIFO number 2 [ 8.838664] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 2 [ 8.947864] lp0: using parport0 (interrupt-driven). [ 8.964810] ppdev: user-space parallel port driver [ 14.260369] CPU0 attaching NULL sched-domain. [ 14.260376] CPU1 attaching NULL sched-domain. [ 14.288741] CPU0 attaching sched-domain: [ 14.288746] domain 0: span 0-1 level MC [ 14.288748] groups: 0 1 [ 14.288755] CPU1 attaching sched-domain: [ 14.288756] domain 0: span 0-1 level MC [ 14.288758] groups: 1 0 [ 19.520807] eth0: no IPv6 routers present