Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.33-ARCH (thomas@evey) (gcc version 4.5.0 (GCC) ) #1 SMP PREEMPT Thu May 13 11:32:37 CEST 2010 Command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000098800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfde0000 (usable) BIOS-e820: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) BIOS-e820: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) BIOS-e820: 00000000cfdf0000 - 00000000cfe00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) NX (Execute Disable) protection: active DMI 2.4 present. No AGP bridge found last_pfn = 0x130000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-C7FFF write-protect C8000-FFFFF uncachable MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFF0000000 write-back 3 base 0000CFE00000 mask FFFFFFE00000 uncachable 4 base 000100000000 mask FFFFE0000000 write-back 5 base 000120000000 mask FFFFF0000000 write-back 6 disabled 7 disabled TOM2: 0000000130000000 aka 4864M x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved) last_pfn = 0xcfde0 max_arch_pfn = 0x400000000 e820 update range: 0000000000001000 - 0000000000010000 (usable) ==> (reserved) Scanning 1 areas for low memory corruption modified physical RAM map: modified: 0000000000000000 - 0000000000001000 (usable) modified: 0000000000001000 - 0000000000010000 (reserved) modified: 0000000000010000 - 0000000000098800 (usable) modified: 000000000009f800 - 00000000000a0000 (reserved) modified: 00000000000f0000 - 0000000000100000 (reserved) modified: 0000000000100000 - 00000000cfde0000 (usable) modified: 00000000cfde0000 - 00000000cfde3000 (ACPI NVS) modified: 00000000cfde3000 - 00000000cfdf0000 (ACPI data) modified: 00000000cfdf0000 - 00000000cfe00000 (reserved) modified: 00000000e0000000 - 00000000f0000000 (reserved) modified: 00000000fec00000 - 0000000100000000 (reserved) modified: 0000000100000000 - 0000000130000000 (usable) initial memory mapped : 0 - 20000000 found SMP MP-table at [ffff8800000f4620] f4620 Using GB pages for direct mapping init_memory_mapping: 0000000000000000-00000000cfde0000 0000000000 - 00c0000000 page 1G 00c0000000 - 00cfc00000 page 2M 00cfc00000 - 00cfde0000 page 4k kernel direct mapping tables up to cfde0000 @ 16000-19000 init_memory_mapping: 0000000100000000-0000000130000000 0100000000 - 0130000000 page 2M kernel direct mapping tables up to 130000000 @ 18000-1a000 RAMDISK: 7f7f8000 - 7fffe9b5 ACPI: RSDP 00000000000f6010 00014 (v00 GBT ) ACPI: RSDT 00000000cfde3000 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: FACP 00000000cfde3040 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: DSDT 00000000cfde30c0 074B0 (v01 GBT GBTUACPI 00001000 MSFT 03000000) ACPI: FACS 00000000cfde0000 00040 ACPI: SSDT 00000000cfdea640 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001) ACPI: HPET 00000000cfdeaf00 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098) ACPI: MCFG 00000000cfdeaf40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: TAMG 00000000cfdeaf80 0030A (v01 GBT GBT B0 5455312E BG?? 53450101) ACPI: APIC 00000000cfdea580 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101) ACPI: Local APIC address 0xfee00000 (13 early reservations) ==> bootmem [0000000000 - 0130000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0001000000 - 00016d7b38] TEXT DATA BSS ==> [0001000000 - 00016d7b38] #2 [007f7f8000 - 007fffe9b5] RAMDISK ==> [007f7f8000 - 007fffe9b5] #3 [00016d8000 - 00016d80fe] BRK ==> [00016d8000 - 00016d80fe] #4 [00000f4630 - 0000100000] BIOS reserved ==> [00000f4630 - 0000100000] #5 [00000f4620 - 00000f4630] MP-table mpf ==> [00000f4620 - 00000f4630] #6 [0000098800 - 00000f1a04] BIOS reserved ==> [0000098800 - 00000f1a04] #7 [00000f1bd8 - 00000f4620] BIOS reserved ==> [00000f1bd8 - 00000f4620] #8 [00000f1a04 - 00000f1bd8] MP-table mpc ==> [00000f1a04 - 00000f1bd8] #9 [0000010000 - 0000012000] TRAMPOLINE ==> [0000010000 - 0000012000] #10 [0000012000 - 0000016000] ACPI WAKEUP ==> [0000012000 - 0000016000] #11 [0000016000 - 0000018000] PGTABLE ==> [0000016000 - 0000018000] #12 [0000018000 - 0000019000] PGTABLE ==> [0000018000 - 0000019000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00130000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000000 -> 0x00000001 0: 0x00000010 -> 0x00000098 0: 0x00000100 -> 0x000cfde0 0: 0x00100000 -> 0x00130000 On node 0 totalpages: 1047913 DMA zone: 56 pages used for memmap DMA zone: 112 pages reserved DMA zone: 3809 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833048 pages, LIFO batch:31 Normal zone: 2688 pages used for memmap Normal zone: 193920 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x10b9a201 base: 0xfed00000 SMP: Allowing 8 CPUs, 4 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 0000000000001000 - 0000000000010000 PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfde0000 - 00000000cfde3000 PM: Registered nosave memory: 00000000cfde3000 - 00000000cfdf0000 PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfe00000 PM: Registered nosave memory: 00000000cfe00000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 0000000100000000 Allocating PCI resources starting at cfe00000 (gap: cfe00000:10200000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:8 nr_node_ids:1 PERCPU: Embedded 29 pages/cpu @ffff880005400000 s89176 r8192 d21416 u262144 pcpu-alloc: s89176 r8192 d21416 u262144 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 4 5 6 7 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1030777 Kernel command line: initrd=/boot/archiso.img archisolabel=ARCH_201005 tmpfs_size=75% locale=en_US.UTF-8 BOOT_IMAGE=/boot/vmlinuz26 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Node 0: aperture @ 20000000 size 32 MB Aperture pointing to e820 RAM. Ignoring. Your BIOS doesn't leave a aperture memory hole Please enable the IOMMU option in the BIOS setup This costs you 64 MB of RAM Mapping aperture over 65536 KB of RAM @ 20000000 PM: Registered nosave memory: 0000000020000000 - 0000000024000000 Memory: 3977160k/4980736k available (3449k kernel code, 789084k absent, 213584k reserved, 1818k data, 484k init) SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Hierarchical RCU implementation. NR_IRQS:768 Console: colour VGA+ 80x25 console [tty0] enabled allocated 41943040 bytes of page_cgroup please try 'cgroup_disable=memory' option if you don't want memory cgroups hpet clockevent registered Fast TSC calibration using PIT Detected 2912.984 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 5828.70 BogoMIPS (lpj=9709933) Security Framework initialized Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys memory Initializing cgroup subsys devices Initializing cgroup subsys freezer Initializing cgroup subsys net_cls tseg: 00cfe00000 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f ACPI: Core revision 20091214 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) II X4 635 Processor stepping 02 Booting Node 0, Processors #1 #2 #3 Brought up 4 CPUs Total of 4 processors activated (23315.03 BogoMIPS). NET: Registered protocol family 16 node 0 link 0: io port [9000, ffff] TOM: 00000000d0000000 aka 3328M Fam 10h mmconf [e0000000, e00fffff] node 0 link 0: mmio [a0000, bffff] node 0 link 0: mmio [d0000000, dfffffff] node 0 link 0: mmio [f0000000, fe02ffff] node 0 link 0: mmio [e0000000, e06fffff] ==> [e0100000, e06fffff] TOM2: 0000000130000000 aka 4864M bus: [00, 06] on node 0 link 0 bus: 00 index 0 io port: [0, ffff] bus: 00 index 1 mmio: [a0000, bffff] bus: 00 index 2 mmio: [d0000000, dfffffff] bus: 00 index 3 mmio: [e0700000, ffffffff] bus: 00 index 4 mmio: [e0100000, e06fffff] bus: 00 index 5 mmio: [130000000, fcffffffff] ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A03:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored) pci_root PNP0A03:00: host bridge window [mem 0xcff00000-0xfed0ffff] (ignored) pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:07.0: PME# supported from D0 D3hot D3cold pci 0000:00:07.0: PME# disabled pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold pci 0000:00:0a.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0xff00-0xff07] pci 0000:00:11.0: reg 14: [io 0xfe00-0xfe03] pci 0000:00:11.0: reg 18: [io 0xfd00-0xfd07] pci 0000:00:11.0: reg 1c: [io 0xfc00-0xfc03] pci 0000:00:11.0: reg 20: [io 0xfb00-0xfb0f] pci 0000:00:11.0: reg 24: [mem 0xfe02f000-0xfe02f3ff] pci 0000:00:12.0: reg 10: [mem 0xfe02e000-0xfe02efff] pci 0000:00:12.2: reg 10: [mem 0xfe02d000-0xfe02d0ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xfe02c000-0xfe02cfff] pci 0000:00:13.2: reg 10: [mem 0xfe02b000-0xfe02b0ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:00:14.5: reg 10: [mem 0xfe02a000-0xfe02afff] pci 0000:00:15.0: supports D1 D2 pci 0000:00:16.0: reg 10: [mem 0xfe029000-0xfe029fff] pci 0000:00:16.2: reg 10: [mem 0xfe028000-0xfe0280ff] pci 0000:00:16.2: supports D1 D2 pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:16.2: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xfd6c0000-0xfd6dffff 64bit] pci 0000:01:00.0: reg 20: [io 0xbe00-0xbeff] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: reg 10: [mem 0xfd6fc000-0xfd6fffff 64bit] pci 0000:01:00.1: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xfd600000-0xfd6fffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:02:00.0: reg 24: [mem 0xfd5fe000-0xfd5fffff] pci 0000:02:00.0: PME# supported from D3hot pci 0000:02:00.0: PME# disabled pci 0000:02:00.1: reg 10: [io 0xef00-0xef07] pci 0000:02:00.1: reg 14: [io 0xee00-0xee03] pci 0000:02:00.1: reg 18: [io 0xed00-0xed07] pci 0000:02:00.1: reg 1c: [io 0xec00-0xec03] pci 0000:02:00.1: reg 20: [io 0xeb00-0xeb0f] pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfd500000-0xfd5fffff] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:03:00.0: reg 10: [mem 0xfdefe000-0xfdefffff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] pci 0000:04:00.0: reg 10: [io 0xce00-0xceff] pci 0000:04:00.0: reg 18: [mem 0xfd9ff000-0xfd9fffff 64bit pref] pci 0000:04:00.0: reg 20: [mem 0xfd9f8000-0xfd9fbfff 64bit pref] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] pci 0000:04:00.0: supports D1 D2 pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:0a.0: PCI bridge to [bus 04-04] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] pci 0000:05:0e.0: reg 10: [mem 0xfdbff000-0xfdbff7ff] pci 0000:05:0e.0: reg 14: [mem 0xfdbf8000-0xfdbfbfff] pci 0000:05:0e.0: supports D1 D2 pci 0000:05:0e.0: PME# supported from D0 D1 D2 D3hot pci 0000:05:0e.0: PME# disabled pci 0000:00:14.4: PCI bridge to [bus 05-05] (subtractive decode) pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] pci 0000:06:00.0: reg 24: [mem 0xfd8fe000-0xfd8fffff] pci 0000:06:00.0: PME# supported from D3hot pci 0000:06:00.0: PME# disabled pci 0000:06:00.1: reg 10: [io 0x9f00-0x9f07] pci 0000:06:00.1: reg 14: [io 0x9e00-0x9e03] pci 0000:06:00.1: reg 18: [io 0x9d00-0x9d07] pci 0000:06:00.1: reg 1c: [io 0x9c00-0x9c03] pci 0000:06:00.1: reg 20: [io 0x9b00-0x9b0f] pci 0000:00:15.0: PCI bridge to [bus 06-06] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0 ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0 vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] already in use pci 0000:00:00.0: can't reserve [mem 0xe0000000-0xffffffff 64bit] NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp 00:08: disabling [mem 0x000da200-0x000dbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000f0000-0x000f7fff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000f8000-0x000fbfff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x000fc000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp 00:08: disabling [mem 0x00100000-0xcfddffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit] pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered system 00:01: [io 0x04d0-0x04d1] has been reserved system 00:01: [io 0x0220-0x0225] has been reserved system 00:01: [io 0x0290-0x0294] has been reserved system 00:02: [io 0x4100-0x411f] has been reserved system 00:02: [io 0x0228-0x022f] has been reserved system 00:02: [io 0x040b] has been reserved system 00:02: [io 0x04d6] has been reserved system 00:02: [io 0x0c00-0x0c01] has been reserved system 00:02: [io 0x0c14] has been reserved system 00:02: [io 0x0c50-0x0c52] has been reserved system 00:02: [io 0x0c6c-0x0c6d] has been reserved system 00:02: [io 0x0c6f] has been reserved system 00:02: [io 0x0cd0-0x0cd1] has been reserved system 00:02: [io 0x0cd2-0x0cd3] has been reserved system 00:02: [io 0x0cd4-0x0cdf] has been reserved system 00:02: [io 0x4000-0x40fe] has been reserved system 00:02: [io 0x4210-0x4217] has been reserved system 00:02: [io 0x0b00-0x0b0f] has been reserved system 00:02: [io 0x0b10-0x0b1f] has been reserved system 00:02: [io 0x0b20-0x0b3f] has been reserved system 00:07: [mem 0xe0000000-0xefffffff] has been reserved system 00:08: [mem 0xcfde0000-0xcfdfffff] could not be reserved system 00:08: [mem 0xffff0000-0xffffffff] has been reserved system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved system 00:08: [mem 0xfff80000-0xfffeffff] has been reserved pci 0000:01:00.0: BAR 6: assigned [mem 0xfd600000-0xfd61ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0xb000-0xbfff] pci 0000:00:02.0: bridge window [mem 0xfd600000-0xfd6fffff] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 02-02] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] pci 0000:00:06.0: bridge window [mem 0xfd500000-0xfd5fffff] pci 0000:00:06.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] pci 0000:00:07.0: PCI bridge to [bus 03-03] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff] pci 0000:00:07.0: bridge window [mem 0xfde00000-0xfdefffff] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref] pci 0000:04:00.0: BAR 6: assigned [mem 0xfd900000-0xfd91ffff pref] pci 0000:00:0a.0: PCI bridge to [bus 04-04] pci 0000:00:0a.0: bridge window [io 0xc000-0xcfff] pci 0000:00:0a.0: bridge window [mem 0xfdc00000-0xfdcfffff] pci 0000:00:0a.0: bridge window [mem 0xfd900000-0xfd9fffff 64bit pref] pci 0000:00:14.4: PCI bridge to [bus 05-05] pci 0000:00:14.4: bridge window [io 0xa000-0xafff] pci 0000:00:14.4: bridge window [mem 0xfdb00000-0xfdbfffff] pci 0000:00:14.4: bridge window [mem 0xfda00000-0xfdafffff pref] pci 0000:00:15.0: PCI bridge to [bus 06-06] pci 0000:00:15.0: bridge window [io 0x9000-0x9fff] pci 0000:00:15.0: bridge window [mem 0xfd800000-0xfd8fffff] pci 0000:00:15.0: bridge window [mem 0xfd700000-0xfd7fffff 64bit pref] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 pci 0000:00:07.0: setting latency timer to 64 pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:0a.0: setting latency timer to 64 pci 0000:00:15.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:15.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff] pci_bus 0000:01: resource 1 [mem 0xfd600000-0xfd6fffff] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] pci_bus 0000:02: resource 1 [mem 0xfd500000-0xfd5fffff] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] pci_bus 0000:04: resource 1 [mem 0xfdc00000-0xfdcfffff] pci_bus 0000:04: resource 2 [mem 0xfd900000-0xfd9fffff 64bit pref] pci_bus 0000:05: resource 0 [io 0xa000-0xafff] pci_bus 0000:05: resource 1 [mem 0xfdb00000-0xfdbfffff] pci_bus 0000:05: resource 2 [mem 0xfda00000-0xfdafffff pref] pci_bus 0000:05: resource 3 [io 0x0000-0xffff] pci_bus 0000:05: resource 4 [mem 0x00000000-0xffffffffffffffff] pci_bus 0000:06: resource 0 [io 0x9000-0x9fff] pci_bus 0000:06: resource 1 [mem 0xfd800000-0xfd8fffff] pci_bus 0000:06: resource 2 [mem 0xfd700000-0xfd7fffff 64bit pref] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Unpacking initramfs... Freeing initrd memory: 8218k freed PCI-DMA: Disabling AGP. PCI-DMA: aperture base @ 20000000 size 65536 KB PCI-DMA: using GART IOMMU. PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture Scanning for low memory corruption every 60 seconds audit: initializing netlink socket (disabled) type=2000 audit(1276020123.623:1): initialized VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 7914 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:02.0: irq 24 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 25 for MSI/MSI-X pcieport 0000:00:07.0: setting latency timer to 64 pcieport 0000:00:07.0: irq 26 for MSI/MSI-X pcieport 0000:00:0a.0: setting latency timer to 64 pcieport 0000:00:0a.0: irq 27 for MSI/MSI-X pcieport 0000:00:15.0: setting latency timer to 64 pcieport 0000:00:15.0: irq 28 for MSI/MSI-X Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: No PS/2 controller found. Probing ports directly. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered NET: Registered protocol family 17 PM: Resume from disk failed. registered taskstats version 1 Initalizing network drop monitor service Freeing unused kernel memory: 484k freed usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub SCSI subsystem initialized r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 r8169 0000:04:00.0: setting latency timer to 64 r8169 0000:04:00.0: irq 29 for MSI/MSI-X eth0: RTL8168d/8111d at 0xffffc90000076000, 6c:f0:49:e2:31:da, XID 083000c0 IRQ 29 usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02d000 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 5 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe02b000 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 5 ports detected ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:16.2: EHCI Host Controller ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:16.2: debug port 1 ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe028000 ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 4 ports detected libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 ahci 0000:00:11.0: irq 30 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 xhci_hcd 0000:03:00.0: setting latency timer to 64 xhci_hcd 0000:03:00.0: xHCI Host Controller xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 xhci_hcd 0000:03:00.0: irq 19, io mem 0xfdefe000 usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor xHCI xhci_add_endpoint called for root hub xHCI xhci_check_bandwidth called for root hub hub 4-0:1.0: USB hub found hub 4-0:1.0: 4 ports detected scsi0 : ahci firewire_ohci 0000:05:0e.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) pata_jmicron 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 pata_jmicron 0000:02:00.1: setting latency timer to 64 scsi2 : pata_jmicron scsi3 : pata_jmicron ata7: PATA max UDMA/100 cmd 0xef00 ctl 0xee00 bmdma 0xeb00 irq 19 ata8: PATA max UDMA/100 cmd 0xed00 ctl 0xec00 bmdma 0xeb08 irq 19 pata_jmicron 0000:06:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 scsi1 : ahci pata_jmicron 0000:06:00.1: setting latency timer to 64 scsi4 : ahci scsi5 : pata_jmicron scsi6 : ahci scsi7 : pata_jmicron ata9: PATA max UDMA/100 cmd 0x9f00 ctl 0x9e00 bmdma 0x9b00 irq 17 ata10: PATA max UDMA/100 cmd 0x9d00 ctl 0x9c00 bmdma 0x9b08 irq 17 scsi8 : ahci scsi9 : ahci ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 30 ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 30 ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 30 ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 30 ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f300 irq 30 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f380 irq 30 ahci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe02e000 ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:02:00.0: setting latency timer to 64 scsi10 : ahci scsi11 : ahci ata11: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe100 irq 18 ata12: SATA max UDMA/133 abar m8192@0xfd5fe000 port 0xfd5fe180 irq 18 ahci 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 ahci 0000:06:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:06:00.0: flags: 64bit ncq pm led clo pmp pio slum part ahci 0000:06:00.0: setting latency timer to 64 scsi12 : ahci scsi13 : ahci ata13: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe100 irq 17 ata14: SATA max UDMA/133 abar m8192@0xfd8fe000 port 0xfd8fe180 irq 17 firewire_ohci: Added fw-ohci device 0000:05:0e.0, OHCI version 1.10 hub 5-0:1.0: USB hub found hub 5-0:1.0: 5 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02c000 hub 6-0:1.0: USB hub found hub 6-0:1.0: 5 ports detected ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:14.5: OHCI Host Controller ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe02a000 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:16.0: OHCI Host Controller ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 8 ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe029000 hub 8-0:1.0: USB hub found hub 8-0:1.0: 4 ports detected ata6: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ata12: SATA link down (SStatus 0 SControl 300) ata11: SATA link down (SStatus 0 SControl 300) ata14: SATA link down (SStatus 0 SControl 300) ata13: SATA link down (SStatus 0 SControl 300) usb 3-3: new high speed USB device using ehci_hcd and address 2 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata3.00: ATA-8: ST31000528AS, CC38, max UDMA/133 ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata1.00: configured for UDMA/133 ata5.00: ATAPI: HL-DT-ST DVDRAM GH22LS50, TL02, max UDMA/100, ATAPI AN ata5.00: configured for UDMA/100 scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 scsi 4:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 Initializing USB Mass Storage driver... scsi14 : usb-storage 3-3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. scsi 8:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22LS50 TL02 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) sd 4:0:0:0: [sdb] Write Protect is off sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 4:0:0:0: Attached scsi generic sg1 type 0 scsi 8:0:0:0: Attached scsi generic sg2 type 5 sda1 sda2 sda3 sda4 sdb1 sd 4:0:0:0: [sdb] Attached SCSI disk sd 0:0:0:0: [sda] Attached SCSI disk firewire_core: created device fw0: GUID 005ff5cb006cf049, S400 sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 8:0:0:0: Attached scsi CD-ROM sr0 usb 6-4: new low speed USB device using ohci_hcd and address 2 usbcore: registered new interface driver hiddev input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-4/6-4:1.0/input/input1 generic-usb 0003:045E:00DD.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-4/input0 input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.0/usb6/6-4/6-4:1.1/input/input2 generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.0-4/input1 usbcore: registered new interface driver usbhid usbhid: USB HID core driver usb 6-5: new low speed USB device using ohci_hcd and address 3 input: Genius Ergo 325 Laser as /devices/pci0000:00/0000:00:13.0/usb6/6-5/6-5:1.0/input/input3 generic-usb 0003:0458:009D.0003: input,hidraw2: USB HID v1.11 Mouse [Genius Ergo 325 Laser] on usb-0000:00:13.0-5/input0 scsi 14:0:0:0: Direct-Access Corsair Flash Voyager 1100 PQ: 0 ANSI: 0 CCS sd 14:0:0:0: Attached scsi generic sg3 type 0 sd 14:0:0:0: [sdc] 15728640 512-byte logical blocks: (8.05 GB/7.50 GiB) sd 14:0:0:0: [sdc] Write Protect is off sd 14:0:0:0: [sdc] Mode Sense: 43 00 00 00 sd 14:0:0:0: [sdc] Assuming drive cache: write through sd 14:0:0:0: [sdc] Assuming drive cache: write through sdc: sdc1 sdc2 sd 14:0:0:0: [sdc] Assuming drive cache: write through sd 14:0:0:0: [sdc] Attached SCSI removable disk aufs 2-standalone.tree-33-20100426 loop: module loaded squashfs: version 4.0 (2009/01/31) Phillip Lougher aufs test_add:248:mount[974]: uid/gid/perm /tmpfs/mnt/overlay 0/0/0755, 0/0/01777 aufs test_add:248:mount[979]: uid/gid/perm /tmpfs/mnt/root-image 0/0/0755, 0/0/01777 udev: starting version 151 input: PC Speaker as /devices/platform/pcspkr/input/input4 EDAC MC: Ver: 2.1.0 May 13 2010 EDAC amd64_edac: Ver: 3.3.0 May 13 2010 EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) amd64_edac: probe of 0000:00:18.2 failed with error -22 ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5 ACPI: Power Button [PWRB] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 ACPI: Power Button [PWRF] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, 114 bytes nvram, hpet irqs hda_codec: ALC892: BIOS auto-probing. input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input7 Too many connections HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 HDA Intel 0000:01:00.1: irq 31 for MSI/MSI-X HDA Intel 0000:01:00.1: setting latency timer to 64