[root@localhost ~]# dmesg Linux version 2.6.33.7-pclos6.bfs (root@localhost.localdomain) (gcc version 4.4.1 (GCC) ) #1 SMP PREEMPT Thu Oct 21 22:42:28 CDT 2010 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000de58f000 (usable) BIOS-e820: 00000000de58f000 - 00000000de78f000 (ACPI NVS) BIOS-e820: 00000000de78f000 - 00000000dfd94000 (usable) BIOS-e820: 00000000dfd94000 - 00000000dfdbf000 (reserved) BIOS-e820: 00000000dfdbf000 - 00000000dfe92000 (usable) BIOS-e820: 00000000dfe92000 - 00000000dfebf000 (ACPI NVS) BIOS-e820: 00000000dfebf000 - 00000000dfee5000 (usable) BIOS-e820: 00000000dfee5000 - 00000000dfef7000 (ACPI data) BIOS-e820: 00000000dfef7000 - 00000000dff00000 (usable) BIOS-e820: 00000000f7000000 - 00000000f8000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb01000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000120000000 (usable) Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel! DMI 2.6 present. last_pfn = 0xdff00 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-FFFFF write-through MTRR variable ranges enabled: 0 base 000000000000 mask FFFF80000000 write-back 1 base 000080000000 mask FFFFC0000000 write-back 2 base 0000C0000000 mask FFFFE0000000 write-back 3 base 0000FFE00000 mask FFFFFFE00000 write-protect 4 base 000100000000 mask FFFFE0000000 write-back 5 disabled 6 disabled 7 disabled TOM2: 0000000120000000 aka 4608M initial memory mapped : 0 - 00c00000 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37a21000 - 37fef652 Allocated new RAMDISK: 0068f000 - 00c5d652 Move RAMDISK from 0000000037a21000 - 0000000037fef651 to 0068f000 - 00c5d651 ACPI: RSDP 000fe020 00024 (v02 LENOVO) ACPI: XSDT dfef6120 0005C (v01 LENOVO CB-01 00000001 01000013) ACPI: FACP dfef5000 000F4 (v04 LENOVO CB-01 00000001 MSFT 01000013) ACPI: DSDT dfee9000 08D43 (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: FACS dfe9c000 00040 ACPI: HPET dfef4000 00038 (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: APIC dfef3000 00068 (v02 INSYDE AMD CRB 00000001 MSFT 01000013) ACPI: MCFG dfef2000 0003C (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: BOOT dfee8000 00028 (v01 INSYDE AMD CRB 00000001 MSFT 01000013) ACPI: SLIC dfee7000 00176 (v01 LENOVO CB-01 00000001 MSFT 01000013) ACPI: SSDT dfee5000 00386 (v01 AMD PowerNow 00000001 AMD 00000001) ACPI: Local APIC address 0xfee00000 2699MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00009000 - 0000fe80 (10 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000100000 - 000068af74] TEXT DATA BSS ==> [0000100000 - 000068af74] #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #4 [000068b000 - 000068e2c3] BRK ==> [000068b000 - 000068e2c3] #5 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] #6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #8 [000068f000 - 0000c5d652] NEW RAMDISK ==> [000068f000 - 0000c5d652] #9 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x000dff00 Movable zone start PFN for each node early_node_map[6] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x000de58f 0: 0x000de78f -> 0x000dfd94 0: 0x000dfdbf -> 0x000dfe92 0: 0x000dfebf -> 0x000dfee5 0: 0x000dfef7 -> 0x000dff00 On node 0 totalpages: 916533 free_area_init_node: node 0, pgdat c0557040, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 5399 pages used for memmap HighMem zone: 684929 pages, LIFO batch:31 Using APIC driver default ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x1002a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at dff00000 (gap: dff00000:17100000) Booting paravirtualized kernel on bare hardware setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages/cpu @c3000000 s33304 r0 d24040 u2097152 pcpu-alloc: s33304 r0 d24040 u2097152 alloc=1*4194304 pcpu-alloc: [0] 0 1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 909366 Kernel command line: BOOT_IMAGE=linux root=UUID=bff592e8-a3e9-4d73-90c6-8f1876c67140 resume=UUID=78717ec3-6ee3-424f-b7b6-08baf4d00542 splash=silent vga=788 PID hash table entries: 4096 (order: 2, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:000dff00) Memory: 3623812k/3668992k available (2639k kernel code, 41320k reserved, 1905k data, 480k init, 2761312k highmem) virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc0571000 - 0xc05e9000 ( 480 kB) .data : 0xc0393d2b - 0xc05704a8 (1905 kB) .text : 0xc0100000 - 0xc0393d2b (2639 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. NR_IRQS:1280 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 2094.639 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.27 BogoMIPS (lpj=2094639) Security Framework initialized Mount-cache hash table entries: 512 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks using C1E aware idle routine Performance Events: AMD PMU driver. ... version: 0 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 00007fffffffffff ... fixed-purpose events: 0 ... event mask: 000000000000000f Checking 'hlt' instruction... OK. ACPI: Checking initramfs for custom DSDT ACPI: Core revision 20091214 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 16230 entries in 32 pages Enabling APIC mode: Flat. Using 1 I/O APICs ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: AMD Athlon(tm) II Dual-Core M320 stepping 02 Booting Node 0, Processors #1 Initializing CPU#1 Brought up 2 CPUs Total of 2 processors activated (8378.90 BogoMIPS). System has AMD C1E enabled Switch to broadcast mode on CPU1 Switch to broadcast mode on CPU0 devtmpfs: initialized NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MMCONFIG for domain 0000 [bus 00-0f] at [mem 0xf7000000-0xf7ffffff] (base 0xf7000000) PCI: MMCONFIG at [mem 0xf7000000-0xf7ffffff] reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code ACPI: BIOS _OSI(Linux) query ignored ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62 ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored) pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000cc000-0x000cffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xf6ffffff] (ignored) pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xfffffffe] invalid; aligning end to 16-byte boundary pci_root PNP0A08:00: host bridge window [mem 0xf8000000-0xffffffff] (ignored) pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:04.0: PME# supported from D0 D3hot D3cold pci 0000:00:04.0: PME# disabled pci 0000:00:06.0: PME# supported from D0 D3hot D3cold pci 0000:00:06.0: PME# disabled pci 0000:00:11.0: reg 10: [io 0x8038-0x803f] pci 0000:00:11.0: reg 14: [io 0x804c-0x804f] pci 0000:00:11.0: reg 18: [io 0x8030-0x8037] pci 0000:00:11.0: reg 1c: [io 0x8048-0x804b] pci 0000:00:11.0: reg 20: [io 0x8010-0x801f] pci 0000:00:11.0: reg 24: [mem 0xf2208000-0xf22083ff] pci 0000:00:12.0: reg 10: [mem 0xf2207000-0xf2207fff] pci 0000:00:12.1: reg 10: [mem 0xf2206000-0xf2206fff] pci 0000:00:12.2: reg 10: [mem 0xf2208500-0xf22085ff] pci 0000:00:12.2: supports D1 D2 pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:12.2: PME# disabled pci 0000:00:13.0: reg 10: [mem 0xf2205000-0xf2205fff] pci 0000:00:13.1: reg 10: [mem 0xf2204000-0xf2204fff] pci 0000:00:13.2: reg 10: [mem 0xf2208400-0xf22084ff] pci 0000:00:13.2: supports D1 D2 pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot pci 0000:00:13.2: PME# disabled pci 0000:00:14.2: reg 10: [mem 0xf2200000-0xf2203fff 64bit] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold pci 0000:00:14.2: PME# disabled pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff pref] pci 0000:01:00.0: reg 14: [io 0x7000-0x70ff] pci 0000:01:00.0: reg 18: [mem 0xf2100000-0xf210ffff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: supports D1 D2 pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x7000-0x7fff] pci 0000:00:02.0: bridge window [mem 0xf2100000-0xf21fffff] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02-07] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff] pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] pci 0000:08:00.0: reg 10: [mem 0xf1000000-0xf103ffff 64bit] pci 0000:08:00.0: reg 18: [io 0x2000-0x207f] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:08:00.0: PME# disabled pci 0000:00:06.0: PCI bridge to [bus 08-08] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] pci 0000:00:06.0: bridge window [mem 0xf1000000-0xf10fffff] pci 0000:00:14.4: PCI bridge to [bus 09-09] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: loaded PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 comparators, 32-bit 14.318180 MHz counter Switching to clocksource tsc pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved system 00:01: [mem 0xf7000000-0xf7ffffff] has been reserved system 00:08: [io 0x0400-0x04cf] has been reserved system 00:08: [io 0x04d0-0x04d1] has been reserved system 00:08: [io 0x04d6] has been reserved system 00:08: [io 0x0680-0x06ff] has been reserved system 00:08: [io 0x077a] has been reserved system 00:08: [io 0x0c00-0x0c01] has been reserved system 00:08: [io 0x0c14] has been reserved system 00:08: [io 0x0c50-0x0c52] has been reserved system 00:08: [io 0x0c6c] has been reserved system 00:08: [io 0x0c6f] has been reserved system 00:08: [io 0x0cd0-0x0cdb] has been reserved system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved system 00:09: [mem 0xffe00000-0xffffffff] has been reserved pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xf2120000-0xf213ffff pref] pci 0000:00:02.0: PCI bridge to [bus 01-01] pci 0000:00:02.0: bridge window [io 0x7000-0x7fff] pci 0000:00:02.0: bridge window [mem 0xf2100000-0xf21fffff] pci 0000:00:02.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref] pci 0000:00:04.0: PCI bridge to [bus 02-07] pci 0000:00:04.0: bridge window [io 0x3000-0x6fff] pci 0000:00:04.0: bridge window [mem 0xf1100000-0xf20fffff] pci 0000:00:04.0: bridge window [mem 0xf0000000-0xf0ffffff 64bit pref] pci 0000:00:06.0: PCI bridge to [bus 08-08] pci 0000:00:06.0: bridge window [io 0x2000-0x2fff] pci 0000:00:06.0: bridge window [mem 0xf1000000-0xf10fffff] pci 0000:00:06.0: bridge window [mem pref disabled] pci 0000:00:14.4: PCI bridge to [bus 09-09] pci 0000:00:14.4: bridge window [io disabled] pci 0000:00:14.4: bridge window [mem disabled] pci 0000:00:14.4: bridge window [mem pref disabled] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:04.0: setting latency timer to 64 pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:00:06.0: setting latency timer to 64 pci_bus 0000:00: resource 0 [io 0x0000-0xffff] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff] pci_bus 0000:01: resource 1 [mem 0xf2100000-0xf21fffff] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x3000-0x6fff] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf20fffff] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf0ffffff 64bit pref] pci_bus 0000:08: resource 0 [io 0x2000-0x2fff] pci_bus 0000:08: resource 1 [mem 0xf1000000-0xf10fffff] pci_bus 0000:09: resource 3 [io 0x0000-0xffff] pci_bus 0000:09: resource 4 [mem 0x00000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered UDP hash table entries: 512 (order: 2, 16384 bytes) UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) NET: Registered protocol family 1 pci 0000:01:00.0: Boot video device PCI: CLS 64 bytes, default 64 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5945k freed Simple Boot Flag at 0x44 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1314204655.692:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) JFS: nTxBlock = 8192, nTxLock = 65536 msgmni has been set to 1698 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pcieport 0000:00:02.0: setting latency timer to 64 pcieport 0000:00:02.0: irq 24 for MSI/MSI-X pcieport 0000:00:04.0: setting latency timer to 64 pcieport 0000:00:04.0: irq 25 for MSI/MSI-X pcieport 0000:00:06.0: setting latency timer to 64 pcieport 0000:00:06.0: irq 26 for MSI/MSI-X vesafb: framebuffer at 0xe0000000, mapped to 0xf8180000, using 1875k, total 16384k vesafb: mode is 800x600x16, linelength=1600, pages=16 vesafb: protected mode interface info at c000:a31c vesafb: pmi: set display start = c00ca3be, set palette = c00ca47c vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... Linux agpgart interface v0.103 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu TCP cubic registered Using IPI No-Shortcut mode input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 isapnp: No Plug & Play device found registered taskstats version 1 BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 480k freed BFS CPU scheduler v0.357 by Con Kolivas. input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input1 input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input2 usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: USB HID core driver ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 ehci_hcd 0000:00:12.2: setting latency timer to 64 ehci_hcd 0000:00:12.2: EHCI Host Controller ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:12.2: debug port 1 ehci_hcd 0000:00:12.2: irq 17, io mem 0xf2208500 ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.33.7-pclos6.bfs ehci_hcd usb usb1: SerialNumber: 0000:00:12.2 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.2: setting latency timer to 64 ehci_hcd 0000:00:13.2: EHCI Host Controller ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:13.2: debug port 1 ehci_hcd 0000:00:13.2: irq 19, io mem 0xf2208400 ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.33.7-pclos6.bfs ehci_hcd usb usb2: SerialNumber: 0000:00:13.2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.0: setting latency timer to 64 ohci_hcd 0000:00:12.0: OHCI Host Controller ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:12.0: irq 16, io mem 0xf2207000 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.33.7-pclos6.bfs ohci_hcd usb usb3: SerialNumber: 0000:00:12.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 3 ports detected ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:12.1: setting latency timer to 64 ohci_hcd 0000:00:12.1: OHCI Host Controller ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:12.1: irq 16, io mem 0xf2206000 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.33.7-pclos6.bfs ohci_hcd usb usb4: SerialNumber: 0000:00:12.1 hub 4-0:1.0: USB hub found hub 4-0:1.0: 3 ports detected ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.0: setting latency timer to 64 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.0: irq 18, io mem 0xf2205000 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.33.7-pclos6.bfs ohci_hcd usb usb5: SerialNumber: 0000:00:13.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 3 ports detected ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.1: setting latency timer to 64 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 ohci_hcd 0000:00:13.1: irq 18, io mem 0xf2204000 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: OHCI Host Controller usb usb6: Manufacturer: Linux 2.6.33.7-pclos6.bfs ohci_hcd usb usb6: SerialNumber: 0000:00:13.1 hub 6-0:1.0: USB hub found hub 6-0:1.0: 3 ports detected uhci_hcd: USB Universal Host Controller Interface driver SCSI subsystem initialized usb 1-3: new high speed USB device using ehci_hcd and address 2 libata version 3.00 loaded. ahci 0000:00:11.0: version 3.0 ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:11.0: irq 27 for MSI/MSI-X ahci 0000:00:11.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part ccc sxs scsi0 : ahci scsi1 : ahci ata1: SATA max UDMA/133 abar m1024@0xf2208000 port 0xf2208100 irq 27 ata2: SATA max UDMA/133 abar m1024@0xf2208000 port 0xf2208180 irq 27 usb 1-3: New USB device found, idVendor=0bda, idProduct=0138 usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-3: Product: USB2.0-CRW usb 1-3: Manufacturer: Generic usb 1-3: SerialNumber: 20090516388200000 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-8: WDC WD5000BEVT-24A0RT0, 01.01A02, max UDMA/133 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD5000BEVT-2 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: ata2.00: ATAPI: SlimtypeDVD A DS8A4S, JL61, max UDMA/100, ATAPI AN usb 2-2: new high speed USB device using ehci_hcd and address 2 ata2.00: configured for UDMA/100 scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A4S JL61 PQ: 0 ANSI: 5 sda1 sda2 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk usb 2-2: New USB device found, idVendor=064e, idProduct=f207 usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-2: Product: Lenovo EasyCamera usb 2-2: Manufacturer: SuYin usb 2-2: SerialNumber: CN031B-J311-SE03-VL-R02.05.03 EXT4-fs (sda1): mounted filesystem with ordered data mode usb 5-3: new full speed USB device using ohci_hcd and address 2 usb 5-3: New USB device found, idVendor=0a5c, idProduct=2150 usb 5-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-3: Product: BCM2046 Bluetooth Device usb 5-3: Manufacturer: Broadcom Corp usb 5-3: SerialNumber: 506313E43830 <30>udev[98]: starting version 167 ACPI: Invalid active0 threshold thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (55 C) ACPI: Invalid active0 threshold thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THR1] (0 C) ACPI: AC Adapter [AC] (off-line) input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 ACPI: Power Button [PWRB] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4 ACPI: Sleep Button [SLPB] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5 ACPI: Lid Switch [LID] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 ACPI: Power Button [PWRF] ACPI: processor limited to max C-state 1 ACPI: Battery Slot [BAT0] (battery present) rtc_cmos 00:04: RTC can wake from S4 rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, 114 bytes nvram, hpet irqs IdeaPAD \_SB_.DECN method failed 5. Is this an IdeaPAD? [Firmware Bug]: ACPI: ACPI brightness control misses _BQC function acpi device:05: registered as cooling_device2 input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:03/LNXVIDEO:01/input/input7 ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com vboxguest: VirtualBox Guest PCI device not found. EXT4-fs (sda6): mounted filesystem with ordered data mode Adding 4088500k swap on /dev/sda5. Priority:-1 extents:1 across:4088500k sd 0:0:0:0: Attached scsi generic sg0 type 0 scsi 1:0:0:0: Attached scsi generic sg1 type 5 Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 Linux video capture interface: v2.00 Initializing USB Mass Storage driver... scsi2 : usb-storage 1-3:1.0 usbcore: registered new interface driver usb-storage USB Mass Storage support registered. Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda pop-up Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (064e:f207) input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:13.2/usb2/2-2/2-2:1.0/input/input8 usbcore: registered new interface driver uvcvideo USB Video Class driver (v0.1.0) atl1c 0000:08:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 atl1c 0000:08:00.0: setting latency timer to 64 atl1c 0000:08:00.0: version 1.0.0.2-NAPI fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. Disabling lock debugging due to kernel taint [fglrx] Maximum main memory to use for locked dma buffers: 3391 MBytes. [fglrx] vendor: 1002 device: 9555 count: 1 [fglrx] ioport: bar 1, base 0x7000, size: 0x100 pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 pci 0000:01:00.0: setting latency timer to 64 [fglrx] Driver built-in PAT support is enabled successfully [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors Bluetooth: L2CAP ver 2.14 Bluetooth: L2CAP socket layer initialized Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 HDA Intel 0000:00:14.2: setting latency timer to 64 Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 [fglrx] ATIF platform detected with notification ID: 0x81 fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X [fglrx] Firegl kernel thread PID: 1287 [fglrx] Firegl kernel thread PID: 1288 [fglrx] Firegl kernel thread PID: 1289 [fglrx] IRQ 28 Enabled [fglrx] Gart USWC size:1108 M. [fglrx] Gart cacheable size:439 M. [fglrx] Reserved FB block: Shared offset:0, size:1000000 [fglrx] Reserved FB block: Unshared offset:fc87000, size:379000 [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000 scsi 2:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 2:0:0:0: [sdb] Attached SCSI removable disk NET: Registered protocol family 10 lo: Disabled Privacy Extensions atl1c 0000:08:00.0: irq 29 for MSI/MSI-X atl1c 0000:08:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex> martian source 255.255.255.255 from 10.11.20.22, on dev eth0 ll header: ff:ff:ff:ff:ff:ff:00:0c:42:76:ae:be:08:00 NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. Installing knfsd (copyright (C) 1996 okir@monad.swb.de). svc: failed to register lockdv1 RPC service (errno 111). lockd_up: makesock failed, error=-111 svc: failed to register lockdv1 RPC service (errno 111). eth0: no IPv6 routers present usbcore: registered new interface driver snd-usb-audio [root@localhost ~]#