smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Western Digital Raptor family Device Model: WDC WD1500ADFD-00NLR5 Serial Number: WD-WMAP42131474 Firmware Version: 21.07QR5 User Capacity: 150 039 945 216 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: ATA/ATAPI-7 published, ANSI INCITS 397-2005 Local Time is: Sun Jan 18 11:19:51 2009 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (4783) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 72) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x103f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 178 178 051 Pre-fail Always - 268 3 Spin_Up_Time 0x0007 212 165 021 Pre-fail Always - 2416 4 Start_Stop_Count 0x0032 100 100 040 Old_age Always - 28 5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 1 7 Seek_Error_Rate 0x000a 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 092 092 000 Old_age Always - 5947 10 Spin_Retry_Count 0x0012 100 253 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0012 100 253 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 24 194 Temperature_Celsius 0x0022 118 107 000 Old_age Always - 29 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 10 198 Offline_Uncorrectable 0x0012 100 253 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 051 Old_age Offline - 0 SMART Error Log Version: 1 ATA Error Count: 308 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 308 occurred at disk power-on lifetime: 5947 hours (247 days + 19 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 82 bf 5a e0 Error: UNC 8 sectors at LBA = 0x005abf82 = 5947266 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 7f bf 5a 40 00 02:47:00.450 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:47:00.450 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:47:00.450 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:47:00.450 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:47:00.450 READ DMA EXT Error 307 occurred at disk power-on lifetime: 5947 hours (247 days + 19 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 82 bf 5a e0 Error: UNC 8 sectors at LBA = 0x005abf82 = 5947266 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 7f bf 5a 40 00 02:46:57.600 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:57.600 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:57.600 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:57.600 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:57.600 READ DMA EXT Error 306 occurred at disk power-on lifetime: 5947 hours (247 days + 19 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 82 bf 5a e0 Error: UNC 8 sectors at LBA = 0x005abf82 = 5947266 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 7f bf 5a 40 00 02:46:53.650 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:53.650 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:53.650 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:53.650 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:53.650 READ DMA EXT Error 305 occurred at disk power-on lifetime: 5947 hours (247 days + 19 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 82 bf 5a e0 Error: UNC 8 sectors at LBA = 0x005abf82 = 5947266 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 7f bf 5a 40 00 02:46:50.800 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:50.800 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:50.800 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:50.800 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:50.800 READ DMA EXT Error 304 occurred at disk power-on lifetime: 5947 hours (247 days + 19 hours) When the command that caused the error occurred, the device was doing SMART Offline or Self-test. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 08 82 bf 5a e0 Error: UNC 8 sectors at LBA = 0x005abf82 = 5947266 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 08 7f bf 5a 40 00 02:46:47.900 READ DMA EXT ec 00 08 82 bf 5a 00 00 02:46:47.900 IDENTIFY DEVICE 25 00 08 7f bf 5a 40 00 02:46:47.900 READ DMA EXT ca 00 08 07 f6 eb 4f 00 02:46:47.900 WRITE DMA 35 00 08 af 8d 89 40 00 02:46:47.900 WRITE DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.