[ 0.000000] microcode: microcode updated early to revision 0x838, date = 2019-04-22 [ 0.000000] Linux version 4.19.0-14-amd64 (debian-kernel@lists.debian.org) (gcc version 8.3.0 (Debian 8.3.0-6)) #1 SMP Debian 4.19.171-2 (2021-01-30) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-14-amd64 root=UUID=dfbee25b-6d78-4f02-9018-53575b79c242 ro quiet [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x0000000078548fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078549000-0x0000000078b48fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000078b49000-0x0000000078c48fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000078c49000-0x0000000078c88fff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000078c89000-0x00000000796f1fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000796f2000-0x0000000079ff1fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079ff2000-0x0000000079ffffff] usable [ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: LENOVO 80G0/Lancer 5A6, BIOS A7CN40WW 07/18/2014 [ 0.000000] tsc: Detected 2165.800 MHz processor [ 0.002377] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.002381] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.002395] last_pfn = 0x180000 max_arch_pfn = 0x400000000 [ 0.002400] MTRR default type: uncachable [ 0.002402] MTRR fixed ranges enabled: [ 0.002405] 00000-9FFFF write-back [ 0.002407] A0000-BFFFF uncachable [ 0.002409] C0000-FFFFF write-protect [ 0.002411] MTRR variable ranges enabled: [ 0.002413] 0 base 0FFC00000 mask FFFC00000 write-protect [ 0.002416] 1 base 000000000 mask F80000000 write-back [ 0.002418] 2 base 07C000000 mask FFC000000 uncachable [ 0.002420] 3 base 07B000000 mask FFF000000 uncachable [ 0.002423] 4 base 07AE00000 mask FFFE00000 uncachable [ 0.002425] 5 base 100000000 mask F80000000 write-back [ 0.002426] 6 disabled [ 0.002428] 7 disabled [ 0.002577] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.002685] last_pfn = 0x7a000 max_arch_pfn = 0x400000000 [ 0.009529] RAMDISK: [mem 0x303f5000-0x341f1fff] [ 0.009539] ACPI: Early table checksum verification disabled [ 0.009639] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO) [ 0.009645] ACPI: XSDT 0x0000000078C88120 000094 (v01 LENOVO CB-01 00000001 01000013) [ 0.009655] ACPI: FACP 0x0000000078C85000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009664] ACPI: DSDT 0x0000000078C74000 00B792 (v02 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009670] ACPI: FACS 0x0000000078C11000 000040 [ 0.009675] ACPI: UEFI 0x0000000078C87000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009681] ACPI: MSDM 0x0000000078C86000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009687] ACPI: HPET 0x0000000078C84000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009693] ACPI: LPIT 0x0000000078C83000 000104 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009698] ACPI: APIC 0x0000000078C82000 000084 (v03 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009704] ACPI: MCFG 0x0000000078C81000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009710] ACPI: SLIC 0x0000000078C80000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009715] ACPI: SSDT 0x0000000078C72000 000763 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009721] ACPI: SSDT 0x0000000078C71000 000290 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009727] ACPI: SSDT 0x0000000078C70000 00017A (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009733] ACPI: UEFI 0x0000000078C6F000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009738] ACPI: SSDT 0x0000000078C6E000 0003E6 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009744] ACPI: FPDT 0x0000000078C6D000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000) [ 0.009757] ACPI: Local APIC address 0xfee00000 [ 0.009927] No NUMA configuration found [ 0.009929] Faking a node at [mem 0x0000000000000000-0x000000017fffffff] [ 0.009936] NODE_DATA(0) allocated [mem 0x17fff8000-0x17fffcfff] [ 0.009987] Zone ranges: [ 0.009989] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.009992] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.009994] Normal [mem 0x0000000100000000-0x000000017fffffff] [ 0.009996] Device empty [ 0.009998] Movable zone start for each node [ 0.010000] Early memory node ranges [ 0.010002] node 0: [mem 0x0000000000001000-0x000000000009dfff] [ 0.010003] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.010005] node 0: [mem 0x0000000020100000-0x0000000078548fff] [ 0.010007] node 0: [mem 0x0000000078c89000-0x00000000796f1fff] [ 0.010008] node 0: [mem 0x0000000079ff2000-0x0000000079ffffff] [ 0.010010] node 0: [mem 0x0000000100000000-0x000000017fffffff] [ 0.011052] Zeroed struct page in unavailable ranges: 29091 pages [ 0.011056] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff] [ 0.011060] On node 0 totalpages: 1019485 [ 0.011063] DMA zone: 64 pages used for memmap [ 0.011064] DMA zone: 21 pages reserved [ 0.011067] DMA zone: 3997 pages, LIFO batch:0 [ 0.011269] DMA32 zone: 7675 pages used for memmap [ 0.011271] DMA32 zone: 491200 pages, LIFO batch:63 [ 0.041028] Normal zone: 8192 pages used for memmap [ 0.041031] Normal zone: 524288 pages, LIFO batch:63 [ 0.066215] x86/hpet: Will disable the HPET for this platform because it's not reliable [ 0.066224] Reserving Intel graphics memory at [mem 0x7b000000-0x7effffff] [ 0.066301] ACPI: PM-Timer IO Port: 0x408 [ 0.066306] ACPI: Local APIC address 0xfee00000 [ 0.066317] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1]) [ 0.066320] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1]) [ 0.066321] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1]) [ 0.066323] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1]) [ 0.066336] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86 [ 0.066340] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.066343] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.066346] ACPI: IRQ0 used by override. [ 0.066348] ACPI: IRQ9 used by override. [ 0.066352] Using ACPI (MADT) for SMP configuration information [ 0.066355] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.066362] TSC deadline timer available [ 0.066365] smpboot: Allowing 4 CPUs, 2 hotplug CPUs [ 0.066413] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.066418] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff] [ 0.066419] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] [ 0.066421] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.066422] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.066426] PM: Registered nosave memory: [mem 0x20000000-0x200fffff] [ 0.066430] PM: Registered nosave memory: [mem 0x78549000-0x78b48fff] [ 0.066431] PM: Registered nosave memory: [mem 0x78b49000-0x78c48fff] [ 0.066433] PM: Registered nosave memory: [mem 0x78c49000-0x78c88fff] [ 0.066436] PM: Registered nosave memory: [mem 0x796f2000-0x79ff1fff] [ 0.066440] PM: Registered nosave memory: [mem 0x7a000000-0x7a7fffff] [ 0.066441] PM: Registered nosave memory: [mem 0x7a800000-0x7adfffff] [ 0.066443] PM: Registered nosave memory: [mem 0x7ae00000-0x7fffffff] [ 0.066444] PM: Registered nosave memory: [mem 0x80000000-0xdfffffff] [ 0.066446] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff] [ 0.066447] PM: Registered nosave memory: [mem 0xe4000000-0xfebfffff] [ 0.066449] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.066450] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff] [ 0.066452] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff] [ 0.066453] PM: Registered nosave memory: [mem 0xfed02000-0xfed02fff] [ 0.066455] PM: Registered nosave memory: [mem 0xfed03000-0xfed03fff] [ 0.066456] PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff] [ 0.066457] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.066459] PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff] [ 0.066460] PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff] [ 0.066462] PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff] [ 0.066463] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff] [ 0.066465] PM: Registered nosave memory: [mem 0xfed1d000-0xfedfffff] [ 0.066466] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.066468] PM: Registered nosave memory: [mem 0xfee01000-0xfeefffff] [ 0.066469] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff] [ 0.066471] PM: Registered nosave memory: [mem 0xff000000-0xffbfffff] [ 0.066472] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.066475] [mem 0x80000000-0xdfffffff] available for PCI devices [ 0.066477] Booting paravirtualized kernel on bare hardware [ 0.066483] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.274465] random: get_random_bytes called from start_kernel+0x93/0x52a with crng_init=0 [ 0.274484] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.275259] percpu: Embedded 45 pages/cpu s144536 r8192 d31592 u524288 [ 0.275276] pcpu-alloc: s144536 r8192 d31592 u524288 alloc=1*2097152 [ 0.275278] pcpu-alloc: [0] 0 1 2 3 [ 0.275325] Built 1 zonelists, mobility grouping on. Total pages: 1003533 [ 0.275327] Policy zone: Normal [ 0.275330] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.19.0-14-amd64 root=UUID=dfbee25b-6d78-4f02-9018-53575b79c242 ro quiet [ 0.297203] Calgary: detecting Calgary via BIOS EBDA area [ 0.297219] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.327237] Memory: 3857372K/4077940K available (10252K kernel code, 1242K rwdata, 3324K rodata, 1600K init, 2260K bss, 220568K reserved, 0K cma-reserved) [ 0.327483] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.327496] Kernel/User page tables isolation: enabled [ 0.327593] ftrace: allocating 31973 entries in 125 pages [ 0.346824] rcu: Hierarchical RCU implementation. [ 0.346828] rcu: RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.346830] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.354519] NR_IRQS: 33024, nr_irqs: 1024, preallocated irqs: 16 [ 0.356842] Console: colour VGA+ 80x25 [ 0.356848] console [tty0] enabled [ 0.356895] ACPI: Core revision 20180810 [ 0.357124] APIC: Switch to symmetric I/O mode setup [ 0.358201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.377135] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns [ 0.377154] Calibrating delay loop (skipped), value calculated using timer frequency.. 4331.60 BogoMIPS (lpj=8663200) [ 0.377158] pid_max: default: 32768 minimum: 301 [ 0.377228] Security Framework initialized [ 0.377230] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.377263] AppArmor: AppArmor initialized [ 0.378826] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.379665] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.379731] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.379768] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.380161] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.380164] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.380190] process: using mwait in idle threads [ 0.380197] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0 [ 0.380199] Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0 [ 0.380202] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.380205] Spectre V2 : Mitigation: Full generic retpoline [ 0.380206] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.380207] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.380220] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.380251] MDS: Mitigation: Clear CPU buffers [ 0.380511] Freeing SMP alternatives memory: 24K [ 0.383012] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (family: 0x6, model: 0x37, stepping: 0x8) [ 0.383265] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver. [ 0.383282] ... version: 3 [ 0.383284] ... bit width: 40 [ 0.383285] ... generic registers: 2 [ 0.383286] ... value mask: 000000ffffffffff [ 0.383287] ... max period: 0000007fffffffff [ 0.383288] ... fixed-purpose events: 3 [ 0.383289] ... event mask: 0000000700000003 [ 0.383365] rcu: Hierarchical SRCU implementation. [ 0.384046] random: crng done (trusting CPU's manufacturer) [ 0.384450] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.384585] smp: Bringing up secondary CPUs ... [ 0.384825] x86: Booting SMP configuration: [ 0.384828] .... node #0, CPUs: #1 [ 0.385138] smp: Brought up 1 node, 2 CPUs [ 0.385138] smpboot: Max logical packages: 2 [ 0.385138] smpboot: Total of 2 processors activated (8663.20 BogoMIPS) [ 0.385637] devtmpfs: initialized [ 0.385637] x86/mm: Memory block size: 128MB [ 0.386203] PM: Registering ACPI NVS region [mem 0x78b49000-0x78c48fff] (1048576 bytes) [ 0.386203] PM: Registering ACPI NVS region [mem 0x796f2000-0x79ff1fff] (9437184 bytes) [ 0.386203] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.386203] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.386203] pinctrl core: initialized pinctrl subsystem [ 0.386203] NET: Registered protocol family 16 [ 0.386203] audit: initializing netlink subsys (disabled) [ 0.386203] audit: type=2000 audit(1615839269.028:1): state=initialized audit_enabled=0 res=1 [ 0.386203] cpuidle: using governor ladder [ 0.386203] cpuidle: using governor menu [ 0.386203] ACPI: bus type PCI registered [ 0.386203] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.386203] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) [ 0.386203] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820 [ 0.386203] PCI: Using configuration type 1 for base access [ 0.390134] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.390134] ACPI: Added _OSI(Module Device) [ 0.390134] ACPI: Added _OSI(Processor Device) [ 0.390134] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.390134] ACPI: Added _OSI(Processor Aggregator Device) [ 0.390134] ACPI: Added _OSI(Linux-Dell-Video) [ 0.390134] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.404024] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.408238] ACPI: Dynamic OEM Table Load: [ 0.408249] ACPI: SSDT 0xFFFF9164FA96C800 00045B (v01 PmRef Cpu0Ist 00003000 INTL 20121220) [ 0.408854] ACPI: Dynamic OEM Table Load: [ 0.408863] ACPI: SSDT 0xFFFF9164FAA58000 0003E5 (v01 PmRef Cpu0Cst 00003001 INTL 20121220) [ 0.409728] ACPI: Dynamic OEM Table Load: [ 0.409737] ACPI: SSDT 0xFFFF9164FAA9A400 00015F (v01 PmRef ApIst 00003000 INTL 20121220) [ 0.410124] ACPI: Dynamic OEM Table Load: [ 0.410132] ACPI: SSDT 0xFFFF9164FA990180 00008D (v01 PmRef ApCst 00003000 INTL 20121220) [ 0.411284] ACPI: EC: EC started [ 0.411286] ACPI: EC: interrupt blocked [ 0.412450] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC [ 0.412454] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.412457] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions [ 0.412458] ACPI: Interpreter enabled [ 0.412495] ACPI: (supports S0 S3 S4 S5) [ 0.412497] ACPI: Using IOAPIC for interrupt routing [ 0.412554] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.413446] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.417985] ACPI: Power Resource [USBC] (on) [ 0.423218] ACPI: Power Resource [PLPE] (on) [ 0.423625] ACPI: Power Resource [PLPE] (on) [ 0.430023] ACPI: Power Resource [CLK0] (on) [ 0.430104] ACPI: Power Resource [CLK1] (on) [ 0.512685] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.512693] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.512860] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.512879] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge [ 0.513454] PCI host bridge to bus 0000:00 [ 0.513459] pci_bus 0000:00: root bus resource [io 0x0070-0x0077] [ 0.513462] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window] [ 0.513464] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window] [ 0.513467] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.513469] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.513472] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.513474] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window] [ 0.513477] pci_bus 0000:00: root bus resource [mem 0x80000000-0x908ffffe window] [ 0.513480] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.513496] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000 [ 0.513673] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000 [ 0.513688] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff] [ 0.513698] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref] [ 0.513708] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057] [ 0.513878] pci 0000:00:13.0: [8086:0f21] type 00 class 0x01018a [ 0.513897] pci 0000:00:13.0: reg 0x10: [io 0x0000-0x0007] [ 0.513907] pci 0000:00:13.0: reg 0x14: [io 0x0000-0x0003] [ 0.513915] pci 0000:00:13.0: reg 0x18: [io 0x0000-0x0007] [ 0.513924] pci 0000:00:13.0: reg 0x1c: [io 0x0000-0x0003] [ 0.513933] pci 0000:00:13.0: reg 0x20: [io 0x3030-0x303f] [ 0.513942] pci 0000:00:13.0: reg 0x24: [io 0x3020-0x302f] [ 0.513954] pci 0000:00:13.0: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.513956] pci 0000:00:13.0: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.513958] pci 0000:00:13.0: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.513960] pci 0000:00:13.0: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.514112] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330 [ 0.514133] pci 0000:00:14.0: reg 0x10: [mem 0x90800000-0x9080ffff 64bit] [ 0.514192] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.514332] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000 [ 0.514362] pci 0000:00:1a.0: reg 0x10: [mem 0x90700000-0x907fffff] [ 0.514375] pci 0000:00:1a.0: reg 0x14: [mem 0x90600000-0x906fffff] [ 0.514476] pci 0000:00:1a.0: PME# supported from D0 D3hot [ 0.514615] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300 [ 0.514641] pci 0000:00:1b.0: reg 0x10: [mem 0x90810000-0x90813fff 64bit] [ 0.514711] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.514841] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400 [ 0.514914] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.515055] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400 [ 0.515127] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.515268] pci 0000:00:1c.3: [8086:0f4e] type 01 class 0x060400 [ 0.515339] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.515486] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100 [ 0.515689] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500 [ 0.515732] pci 0000:00:1f.3: reg 0x10: [mem 0x90814000-0x9081401f] [ 0.515801] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f] [ 0.516088] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.516192] pci 0000:02:00.0: [10ec:b723] type 00 class 0x028000 [ 0.516244] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.516292] pci 0000:02:00.0: reg 0x18: [mem 0x90500000-0x90503fff 64bit] [ 0.516475] pci 0000:02:00.0: supports D1 D2 [ 0.516478] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.516692] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.516697] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.516701] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] [ 0.516792] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000 [ 0.516822] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff] [ 0.516849] pci 0000:03:00.0: reg 0x18: [mem 0x90404000-0x90404fff 64bit] [ 0.516866] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit] [ 0.516965] pci 0000:03:00.0: supports D1 D2 [ 0.516968] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.517124] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.517129] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.517133] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff] [ 0.518795] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.518918] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.519040] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.519162] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.519283] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.519404] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.519527] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *7 [ 0.519647] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.522117] ACPI Warning: GPE type mismatch (level/edge) (20180810/evxface-792) [ 0.522122] ACPI: EC: interrupt unblocked [ 0.522131] ACPI: EC: event unblocked [ 0.522140] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x18, EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.522143] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events [ 0.522301] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.522301] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.522301] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.522301] vgaarb: loaded [ 0.522301] pps_core: LinuxPPS API ver. 1 registered [ 0.522301] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.522301] PTP clock support registered [ 0.522301] EDAC MC: Ver: 3.0.0 [ 0.522301] PCI: Using ACPI for IRQ routing [ 0.522566] PCI: pci_cache_line_size set to 64 bytes [ 0.522615] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff] [ 0.522617] e820: reserve RAM buffer [mem 0x78549000-0x7bffffff] [ 0.522619] e820: reserve RAM buffer [mem 0x796f2000-0x7bffffff] [ 0.522621] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff] [ 0.525150] clocksource: Switched to clocksource tsc-early [ 0.545725] VFS: Disk quotas dquot_6.6.0 [ 0.545760] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.545972] AppArmor: AppArmor Filesystem Enabled [ 0.546008] pnp: PnP ACPI init [ 0.546115] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.547331] system 00:01: [io 0x0680-0x069f] has been reserved [ 0.547335] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.547337] system 00:01: [io 0x0500-0x05fe] has been reserved [ 0.547340] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.547344] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.547353] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.547462] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.547525] pnp 00:03: Plug and Play ACPI device, IDs ETD0624 PNP0f13 ETD0000 (active) [ 0.548039] system 00:04: [mem 0xe0000000-0xefffffff] could not be reserved [ 0.548042] system 00:04: [mem 0xfed01000-0xfed01fff] has been reserved [ 0.548045] system 00:04: [mem 0xfed03000-0xfed03fff] has been reserved [ 0.548048] system 00:04: [mem 0xfed04000-0xfed04fff] has been reserved [ 0.548051] system 00:04: [mem 0xfed0c000-0xfed0ffff] has been reserved [ 0.548053] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved [ 0.548056] system 00:04: [mem 0xfed1c000-0xfed1cfff] has been reserved [ 0.548059] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.548062] system 00:04: [mem 0xfef00000-0xfeffffff] has been reserved [ 0.548071] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.550102] pnp: PnP ACPI: found 5 devices [ 0.558190] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.558205] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 [ 0.558211] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [ 0.558214] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [ 0.558219] pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [ 0.558223] pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [ 0.558239] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [ 0.558242] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [ 0.558249] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558252] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558259] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558262] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558268] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558271] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558277] pci 0000:00:1c.0: BAR 13: assigned [io 0x4000-0x4fff] [ 0.558285] pci 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558288] pci 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558295] pci 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558298] pci 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558302] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [ 0.558305] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [ 0.558311] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [ 0.558314] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [ 0.558318] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.558322] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff] [ 0.558332] pci 0000:00:1c.2: PCI bridge to [bus 02] [ 0.558335] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.558339] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff] [ 0.558346] pci 0000:00:1c.3: PCI bridge to [bus 03] [ 0.558349] pci 0000:00:1c.3: bridge window [io 0x1000-0x1fff] [ 0.558353] pci 0000:00:1c.3: bridge window [mem 0x90400000-0x904fffff] [ 0.558361] pci_bus 0000:00: resource 4 [io 0x0070-0x0077] [ 0.558364] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window] [ 0.558366] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window] [ 0.558368] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.558371] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.558373] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.558376] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window] [ 0.558378] pci_bus 0000:00: resource 11 [mem 0x80000000-0x908ffffe window] [ 0.558381] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.558384] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.558386] pci_bus 0000:02: resource 1 [mem 0x90500000-0x905fffff] [ 0.558389] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] [ 0.558391] pci_bus 0000:03: resource 1 [mem 0x90400000-0x904fffff] [ 0.558554] NET: Registered protocol family 2 [ 0.558840] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes) [ 0.558883] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.559007] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.559149] TCP: Hash tables configured (established 32768 bind 32768) [ 0.559242] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.559278] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.559403] NET: Registered protocol family 1 [ 0.559414] NET: Registered protocol family 44 [ 0.559434] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.559790] PCI: CLS 64 bytes, default 64 [ 0.559881] Unpacking initramfs... [ 2.102330] Freeing initrd memory: 63476K [ 2.102338] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.102341] software IO TLB: mapped [mem 0x74549000-0x78549000] (64MB) [ 2.102397] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1f37ff50e1e, max_idle_ns: 440795224014 ns [ 2.102435] clocksource: Switched to clocksource tsc [ 2.103536] Initialise system trusted keyrings [ 2.103555] Key type blacklist registered [ 2.103666] workingset: timestamp_bits=40 max_order=20 bucket_order=0 [ 2.106252] zbud: loaded [ 2.461951] Key type asymmetric registered [ 2.461954] Asymmetric key parser 'x509' registered [ 2.461980] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.462040] io scheduler noop registered [ 2.462042] io scheduler deadline registered [ 2.462119] io scheduler cfq registered (default) [ 2.462122] io scheduler mq-deadline registered [ 2.462927] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.462956] intel_idle: MWAIT substates: 0x33000020 [ 2.462958] intel_idle: v0.4.1 model 0x37 [ 2.463120] intel_idle: lapic_timer_reliable_states 0xffffffff [ 2.465291] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.485528] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.486730] hpet: number irqs doesn't agree with number of timers [ 2.486778] Linux agpgart interface v0.103 [ 2.486867] AMD IOMMUv2 driver by Joerg Roedel [ 2.486869] AMD IOMMUv2 functionality not available on this system [ 2.487288] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.499602] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.499612] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.500125] mousedev: PS/2 mouse device common for all mice [ 2.500269] rtc_cmos 00:00: RTC can wake from S4 [ 2.500486] rtc_cmos 00:00: registered as rtc0 [ 2.500517] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram [ 2.500539] intel_pstate: Intel P-state driver initializing [ 2.500962] ledtrig-cpu: registered to indicate activity on CPUs [ 2.504177] NET: Registered protocol family 10 [ 2.509137] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 2.532289] Segment Routing with IPv6 [ 2.532327] mip6: Mobile IPv6 [ 2.532331] NET: Registered protocol family 17 [ 2.532719] mpls_gso: MPLS GSO support [ 2.533030] mce: Using 6 MCE banks [ 2.533101] microcode: sig=0x30678, pf=0x8, revision=0x838 [ 2.533301] microcode: Microcode Update Driver: v2.2. [ 2.533330] sched_clock: Marking stable (2530991684, 2298667)->(2536240515, -2950164) [ 2.534044] registered taskstats version 1 [ 2.534046] Loading compiled-in X.509 certificates [ 2.606554] Loaded X.509 cert 'Debian Secure Boot CA: 6ccece7e4c6c0d1f6149f3dd27dfcc5cbb419ea1' [ 2.606586] Loaded X.509 cert 'Debian Secure Boot Signer 2020: 00b55eb3b9' [ 2.606618] zswap: loaded using pool lzo/zbud [ 2.606780] AppArmor: AppArmor sha1 policy hashing enabled [ 2.607377] rtc_cmos 00:00: setting system clock to 2021-03-15 20:14:31 UTC (1615839271) [ 2.615240] Freeing unused kernel image memory: 1600K [ 2.629710] Write protecting the kernel read-only data: 16384k [ 2.631275] Freeing unused kernel image memory: 2028K [ 2.631912] Freeing unused kernel image memory: 772K [ 2.655149] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.655298] x86/mm: Checking user space page tables [ 2.673713] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.673717] Run /init as init process [ 3.045973] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 3.045987] ACPI: Lid Switch [LID0] [ 3.046087] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.046110] ACPI: Power Button [PWRB] [ 3.046203] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.046218] ACPI: Power Button [PWRF] [ 3.063608] hidraw: raw HID events driver (C) Jiri Kosina [ 3.101938] thermal LNXTHERM:00: registered as thermal_zone0 [ 3.101940] ACPI: Thermal Zone [TZ01] (50 C) [ 3.147556] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 3.170234] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 3.178174] ACPI: bus type USB registered [ 3.178217] usbcore: registered new interface driver usbfs [ 3.178237] usbcore: registered new interface driver hub [ 3.178258] usbcore: registered new device driver usb [ 3.197110] SCSI subsystem initialized [ 3.219418] libphy: r8169: probed [ 3.219775] r8169 0000:03:00.0 eth0: RTL8168g/8111g, 28:d2:44:fd:8a:b3, XID 50900800, IRQ 87 [ 3.219778] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.293282] r8169 0000:03:00.0 enp3s0: renamed from eth0 [ 3.294537] libata version 3.00 loaded. [ 3.301516] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.301537] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 3.302607] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 3.302613] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 3.302942] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 3.302944] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.302946] usb usb1: Product: xHCI Host Controller [ 3.302948] usb usb1: Manufacturer: Linux 4.19.0-14-amd64 xhci-hcd [ 3.302950] usb usb1: SerialNumber: 0000:00:14.0 [ 3.303170] ata_piix 0000:00:13.0: version 2.13 [ 3.303306] ata_piix 0000:00:13.0: MAP [ P0 -- P1 -- ] [ 3.304012] hub 1-0:1.0: USB hub found [ 3.304118] hub 1-0:1.0: 6 ports detected [ 3.304654] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 3.304662] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 3.304669] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 3.304852] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.19 [ 3.304854] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.304856] usb usb2: Product: xHCI Host Controller [ 3.304858] usb usb2: Manufacturer: Linux 4.19.0-14-amd64 xhci-hcd [ 3.304860] usb usb2: SerialNumber: 0000:00:14.0 [ 3.305604] hub 2-0:1.0: USB hub found [ 3.305752] hub 2-0:1.0: 1 port detected [ 3.306135] [drm] Replacing VGA console driver [ 3.309695] Console: switching to colour dummy device 80x25 [ 3.311700] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.311702] [drm] Driver supports precise vblank timestamp query. [ 3.312218] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 3.312352] scsi host0: ata_piix [ 3.312792] scsi host1: ata_piix [ 3.312886] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x3030 irq 14 [ 3.312890] ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x3038 irq 15 [ 3.417004] [drm] Initialized i915 1.6.0 20180719 for 0000:00:02.0 on minor 0 [ 3.418179] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 3.418201] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 3.418596] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6 [ 3.432263] fbcon: inteldrmfb (fb0) is primary device [ 3.637608] usb 1-4: new high-speed USB device number 2 using xhci_hcd [ 3.787685] usb 1-4: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=88.32 [ 3.787698] usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.787706] usb 1-4: Product: USB2.0 Hub [ 3.789308] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [ 3.789469] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [ 3.789860] hub 1-4:1.0: USB hub found [ 3.790201] hub 1-4:1.0: 4 ports detected [ 3.791476] usb: port power management may be unreliable [ 3.792751] ata1.00: ATA-8: CSSD-V60GB2, 1.0, max UDMA/100 [ 3.792762] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 3.794778] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8FBS, F801, max UDMA/100 [ 3.795837] ata1.00: configured for UDMA/100 [ 3.799169] scsi 0:0:0:0: Direct-Access ATA CSSD-V60GB2 1.0 PQ: 0 ANSI: 5 [ 3.817901] ata2.00: configured for UDMA/100 [ 3.825615] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8FBS F801 PQ: 0 ANSI: 5 [ 3.825707] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x594f03) [ 3.841739] psmouse serio1: elantech: Synaptics capabilities query result 0x70, 0x15, 0x0a. [ 3.857955] psmouse serio1: elantech: Elan sample query result 05, 20, 97 [ 3.954323] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 4.085582] usb 1-4.1: new high-speed USB device number 3 using xhci_hcd [ 4.205740] usb 1-4.1: New USB device found, idVendor=5986, idProduct=055d, bcdDevice=36.55 [ 4.205753] usb 1-4.1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 4.205762] usb 1-4.1: Product: Lenovo EasyCamera [ 4.205771] usb 1-4.1: Manufacturer: Bsion Corp. [ 4.205779] usb 1-4.1: SerialNumber: 200901010001 [ 4.293620] usb 1-4.2: new high-speed USB device number 4 using xhci_hcd [ 4.393994] usb 1-4.2: New USB device found, idVendor=0bda, idProduct=0129, bcdDevice=39.60 [ 4.394007] usb 1-4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.394016] usb 1-4.2: Product: USB2.0-CRW [ 4.394024] usb 1-4.2: Manufacturer: Generic [ 4.394033] usb 1-4.2: SerialNumber: 20100201396000000 [ 4.409006] usbcore: registered new interface driver rtsx_usb [ 4.485621] usb 1-4.3: new full-speed USB device number 5 using xhci_hcd [ 4.587907] usb 1-4.3: New USB device found, idVendor=0bda, idProduct=b728, bcdDevice= 2.00 [ 4.587919] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.587928] usb 1-4.3: Product: Bluetooth Radio [ 4.587937] usb 1-4.3: Manufacturer: Realtek [ 4.587945] usb 1-4.3: SerialNumber: 00e04c000001 [ 4.673454] Console: switching to colour frame buffer device 170x48 [ 4.704371] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 4.737573] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.9 GiB) [ 4.737588] sd 0:0:0:0: [sda] Write Protect is off [ 4.737591] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.737612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.738815] sda: sda1 sda2 < sda5 > [ 4.739591] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.775989] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 4.775997] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 4.776484] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 5.193148] raid6: sse2x1 gen() 3344 MB/s [ 5.261151] raid6: sse2x1 xor() 2607 MB/s [ 5.329151] raid6: sse2x2 gen() 3786 MB/s [ 5.397149] raid6: sse2x2 xor() 3092 MB/s [ 5.465144] raid6: sse2x4 gen() 5561 MB/s [ 5.533144] raid6: sse2x4 xor() 2476 MB/s [ 5.533146] raid6: using algorithm sse2x4 gen() 5561 MB/s [ 5.533147] raid6: .... xor() 2476 MB/s, rmw enabled [ 5.533148] raid6: using ssse3x2 recovery algorithm [ 5.555304] xor: measuring software checksum speed [ 5.593314] prefetch64-sse: 8262.000 MB/sec [ 5.633276] generic_sse: 7239.000 MB/sec [ 5.633278] xor: using function: prefetch64-sse (8262.000 MB/sec) [ 5.750859] Btrfs loaded, crc32c=crc32c-intel [ 5.947911] PM: Image not found (code -22) [ 6.332321] cryptd: max_cpu_qlen set to 1000 [ 6.500461] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 7.029383] systemd[1]: Inserted module 'autofs4' [ 7.071191] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 7.089889] systemd[1]: Detected architecture x86-64. [ 7.098881] systemd[1]: Set hostname to . [ 7.453984] systemd[1]: Created slice User and Session Slice. [ 7.454603] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 7.454892] systemd[1]: Listening on udev Kernel Socket. [ 7.455064] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 7.455328] systemd[1]: Listening on fsck to fsckd communication Socket. [ 7.455629] systemd[1]: Listening on Journal Socket (/dev/log). [ 7.455663] systemd[1]: Reached target User and Group Name Lookups. [ 7.578065] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 7.784700] systemd-journald[210]: Received request to flush runtime journal from PID 1 [ 7.894278] audit: type=1400 audit(1615839276.783:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=241 comm="apparmor_parser" [ 7.899755] audit: type=1400 audit(1615839276.787:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=242 comm="apparmor_parser" [ 7.914920] audit: type=1400 audit(1615839276.803:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe" pid=245 comm="apparmor_parser" [ 7.914928] audit: type=1400 audit(1615839276.803:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="nvidia_modprobe//kmod" pid=245 comm="apparmor_parser" [ 7.943970] audit: type=1400 audit(1615839276.831:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi" pid=248 comm="apparmor_parser" [ 7.943981] audit: type=1400 audit(1615839276.831:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/mysqld-akonadi///usr/sbin/mysqld" pid=248 comm="apparmor_parser" [ 7.958509] audit: type=1400 audit(1615839276.847:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=246 comm="apparmor_parser" [ 7.958517] audit: type=1400 audit(1615839276.847:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=246 comm="apparmor_parser" [ 7.963836] audit: type=1400 audit(1615839276.851:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/haveged" pid=251 comm="apparmor_parser" [ 7.972810] audit: type=1400 audit(1615839276.859:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=252 comm="apparmor_parser" [ 8.242718] ACPI: AC Adapter [ADP0] (on-line) [ 8.277790] battery: ACPI: Battery Slot [BAT0] (battery present) [ 8.297202] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 8.339679] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input7 [ 8.445196] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.445299] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.535601] iTCO_vendor_support: vendor-support=0 [ 8.574630] Bluetooth: Core ver 2.22 [ 8.574669] NET: Registered protocol family 31 [ 8.574671] Bluetooth: HCI device and connection manager initialized [ 8.574677] Bluetooth: HCI socket layer initialized [ 8.574680] Bluetooth: L2CAP socket layer initialized [ 8.574690] Bluetooth: SCO socket layer initialized [ 8.598056] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 8.598259] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460) [ 8.598433] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 8.608091] input: PC Speaker as /devices/platform/pcspkr/input/input8 [ 8.698795] usbcore: registered new interface driver btusb [ 8.717019] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [ 8.717914] Bluetooth: hci0: RTL: rom_version status=0 version=1 [ 8.717919] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin [ 8.725193] bluetooth hci0: firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin [ 8.725224] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin [ 8.725258] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2) [ 8.725330] firmware_class: See https://wiki.debian.org/Firmware for information about missing firmware [ 8.725405] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [ 8.725417] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [ 8.786826] Bluetooth: HCI UART driver ver 2.3 [ 8.786829] Bluetooth: HCI UART protocol H4 registered [ 8.786830] Bluetooth: HCI UART protocol BCSP registered [ 8.786865] Bluetooth: HCI UART protocol LL registered [ 8.786867] Bluetooth: HCI UART protocol ATH3K registered [ 8.786887] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 8.786930] Bluetooth: HCI UART protocol Intel registered [ 8.786986] Bluetooth: HCI UART protocol Broadcom registered [ 8.787029] Bluetooth: HCI UART protocol QCA registered [ 8.787030] Bluetooth: HCI UART protocol AG6XX registered [ 8.787031] Bluetooth: HCI UART protocol Marvell registered [ 8.788723] media: Linux media interface: v0.10 [ 8.844230] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 8.995502] videodev: Linux video capture interface: v2.00 [ 9.027105] snd_hda_codec_conexant hdaudioC0D0: CX20751/2: BIOS auto-probing. [ 9.028260] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker [ 9.028263] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 9.028265] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0) [ 9.028267] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0 [ 9.028268] snd_hda_codec_conexant hdaudioC0D0: inputs: [ 9.028271] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a [ 9.028273] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19 [ 9.071956] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication [ 9.221086] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:055d) [ 9.265175] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 9.265278] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 9.265373] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 9.277869] input: Lenovo EasyCamera: Lenovo EasyC as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4.1/1-4.1:1.0/input/input12 [ 9.278644] usbcore: registered new interface driver uvcvideo [ 9.278645] USB Video Class driver (1.1.1) [ 9.451028] kvm: disabled by bios [ 9.501348] kvm: disabled by bios [ 9.554532] intel_rapl: Found RAPL domain package [ 9.554536] intel_rapl: Found RAPL domain core [ 9.613373] rtl8723be: Using firmware rtlwifi/rtl8723befw_36.bin [ 9.615292] rtl8723be 0000:02:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin [ 9.629715] ieee80211 phy0: Selected rate control algorithm 'rtl_rc' [ 9.630054] rtlwifi: rtlwifi: wireless switch is on [ 9.638712] rtl8723be 0000:02:00.0 wlp2s0: renamed from wlan0 [ 9.703601] Adding 4075516k swap on /dev/sda5. Priority:-2 extents:1 across:4075516k SSFS [ 10.252367] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.252370] Bluetooth: BNEP filters: protocol multicast [ 10.252376] Bluetooth: BNEP socket layer initialized [ 14.199587] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 14.205556] r8169 0000:03:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw [ 14.205806] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [ 14.315132] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [ 14.325259] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 14.668092] broken atomic modeset userspace detected, disabling atomic [ 15.072091] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 15.580529] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 15.675253] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 27.863194] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 58.390125] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 58.917671] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 64.759517] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 70.365519] usb 1-2: new high-speed USB device number 6 using xhci_hcd [ 70.562050] usb 1-2: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 5.08 [ 70.562054] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 70.562056] usb 1-2: Product: USB to ATA/ATAPI Bridge [ 70.562058] usb 1-2: Manufacturer: JMicron [ 70.562060] usb 1-2: SerialNumber: 0123456789ABCDEF [ 70.732473] usbcore: registered new interface driver usb-storage [ 70.751988] scsi host2: uas [ 70.752534] usbcore: registered new interface driver uas [ 70.762807] scsi 2:0:0:0: Direct-Access JMicron Generic 0508 PQ: 0 ANSI: 6 [ 70.764029] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 73.866362] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 73.866366] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 73.866539] sd 2:0:0:0: [sdb] Write Protect is off [ 73.866542] sd 2:0:0:0: [sdb] Mode Sense: 5f 00 00 08 [ 73.866893] sd 2:0:0:0: [sdb] Disabling FUA [ 73.866896] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 73.867165] sd 2:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes) [ 73.970683] sdb: sdb3 [ 73.982847] sd 2:0:0:0: [sdb] Attached SCSI disk [ 77.433463] wlp2s0: authenticate with 56:14:73:36:58:7d [ 77.447396] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 77.449623] wlp2s0: authenticated [ 77.457177] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 77.464046] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 77.464317] wlp2s0: associated [ 77.644464] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 120.608301] device-mapper: uevent: version 1.0.3 [ 120.608524] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ 121.451034] NET: Registered protocol family 38 [ 139.162097] EXT4-fs (dm-1): warning: mounting fs with errors, running e2fsck is recommended [ 139.213213] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null) [ 447.839583] EXT4-fs (dm-1): error count since last fsck: 2 [ 447.839587] EXT4-fs (dm-1): initial error at time 1570916908: ext4_journal_check_start:56 [ 447.839589] EXT4-fs (dm-1): last error at time 1570916908: ext4_journal_check_start:56 [ 728.360122] usb 1-2: USB disconnect, device number 6 [ 728.369725] sd 2:0:0:0: [sdb] Synchronizing SCSI cache [ 728.618757] sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK [ 756.303955] perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79250 [ 869.155100] perf: interrupt took too long (3152 > 3150), lowering kernel.perf_event_max_sample_rate to 63250 [ 1107.555420] perf: interrupt took too long (3991 > 3940), lowering kernel.perf_event_max_sample_rate to 50000 [ 1603.713101] perf: interrupt took too long (5012 > 4988), lowering kernel.perf_event_max_sample_rate to 39750 [ 1934.668371] rtlwifi: AP off, try to reconnect now [ 1934.668448] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 1935.775451] wlp2s0: authenticate with 56:14:73:36:58:7d [ 1935.785738] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 1935.787979] wlp2s0: authenticated [ 1935.788739] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 1935.892710] wlp2s0: associate with 56:14:73:36:58:7d (try 2/3) [ 1935.996798] wlp2s0: associate with 56:14:73:36:58:7d (try 3/3) [ 1936.100994] wlp2s0: association with 56:14:73:36:58:7d timed out [ 1937.594415] wlp2s0: authenticate with 56:14:73:36:58:7d [ 1937.615041] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 1937.617293] wlp2s0: authenticated [ 1937.622059] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 1937.628917] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 1937.629188] wlp2s0: associated [ 3484.321366] perf: interrupt took too long (6276 > 6265), lowering kernel.perf_event_max_sample_rate to 31750 [ 4967.761489] rtlwifi: AP off, try to reconnect now [ 4967.761532] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 4968.902430] wlp2s0: authenticate with 56:14:73:36:58:7d [ 4968.914570] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 4968.916489] wlp2s0: authenticated [ 4968.917865] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 4968.922769] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 4968.923032] wlp2s0: associated [ 5064.482781] rtlwifi: AP off, try to reconnect now [ 5064.482858] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 5065.629839] wlp2s0: authenticate with 56:14:73:36:58:7d [ 5065.640598] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 5065.645634] wlp2s0: authenticated [ 5065.647971] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 5065.654022] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 5065.654338] wlp2s0: associated [ 5205.928485] rtlwifi: AP off, try to reconnect now [ 5205.928540] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 5207.075966] wlp2s0: authenticate with 56:14:73:36:58:7d [ 5207.088163] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 5207.089684] wlp2s0: authenticated [ 5207.093423] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 5207.098130] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 5207.098403] wlp2s0: associated [ 5286.609213] rtlwifi: AP off, try to reconnect now [ 5286.609306] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 5287.721369] wlp2s0: authenticate with 56:14:73:36:58:7d [ 5287.750125] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 5287.756442] wlp2s0: authenticated [ 5287.757390] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 5287.763766] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 5287.764063] wlp2s0: associated [ 5413.678504] rtlwifi: AP off, try to reconnect now [ 5413.678590] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [ 5414.828488] wlp2s0: authenticate with 56:14:73:36:58:7d [ 5414.841771] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [ 5414.843732] wlp2s0: authenticated [ 5414.846673] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [ 5414.851940] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [ 5414.852229] wlp2s0: associated [ 9547.676993] perf: interrupt took too long (7859 > 7845), lowering kernel.perf_event_max_sample_rate to 25250 [10174.700399] rtlwifi: AP off, try to reconnect now [10174.700447] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [10175.845441] wlp2s0: authenticate with 56:14:73:36:58:7d [10175.858875] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [10175.860440] wlp2s0: authenticated [10175.869270] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [10175.884741] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [10175.885020] wlp2s0: associated [10233.162887] rtlwifi: AP off, try to reconnect now [10233.162936] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [10234.314383] wlp2s0: authenticate with 56:14:73:36:58:7d [10234.324585] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [10234.329708] wlp2s0: authenticated [10234.351050] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [10234.356016] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [10234.356301] wlp2s0: associated [10261.387813] rtlwifi: AP off, try to reconnect now [10261.388020] wlp2s0: Connection to AP 56:14:73:36:58:7d lost [10262.502091] wlp2s0: authenticate with 56:14:73:36:58:7d [10262.525019] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [10262.540179] wlp2s0: authenticated [10262.546367] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [10262.551382] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [10262.551649] wlp2s0: associated [10452.062153] wlp2s0: deauthenticating from 56:14:73:36:58:7d by local choice (Reason: 3=DEAUTH_LEAVING) [10779.325911] pci_bus 0000:01: Allocating resources [10779.325920] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000 [10779.325924] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000 [10779.325932] pci_bus 0000:02: Allocating resources [10779.325942] pcieport 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000 [10779.325947] pci_bus 0000:03: Allocating resources [10779.325954] pcieport 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000 [10779.325965] pcieport 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [10779.325968] pcieport 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [10779.325974] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.325976] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10779.325982] pcieport 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.325984] pcieport 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10779.325990] pcieport 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.325992] pcieport 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10779.325999] pcieport 0000:00:1c.3: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.326001] pcieport 0000:00:1c.3: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10779.326007] pcieport 0000:00:1c.2: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.326009] pcieport 0000:00:1c.2: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10779.326012] pcieport 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000] [10779.326014] pcieport 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000] [10779.326020] pcieport 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref] [10779.326022] pcieport 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref] [10781.496651] PM: suspend entry (deep) [10781.496654] PM: Syncing filesystems ... done. [10783.073755] (NULL device *): firmware: direct-loading firmware rtlwifi/rtl8723befw_36.bin [10783.074821] (NULL device *): firmware: direct-loading firmware rtl_bt/rtl8723b_fw.bin [10783.074912] Freezing user space processes ... (elapsed 0.001 seconds) done. [10783.076856] OOM killer disabled. [10783.076859] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [10783.078325] Suspending console(s) (use no_console_suspend to debug) [10783.164075] sd 0:0:0:0: [sda] Synchronizing SCSI cache [10784.553251] sd 0:0:0:0: [sda] Stopping disk [10784.806426] ACPI: EC: interrupt blocked [10784.824683] ACPI: Preparing to enter system sleep state S3 [10784.826023] ACPI: EC: event blocked [10784.826028] ACPI: EC: EC stopped [10784.826032] PM: Saving platform NVS memory [10784.826274] Disabling non-boot CPUs ... [10784.841896] smpboot: CPU 1 is now offline [10784.848036] ACPI: Low-level resume complete [10784.848109] ACPI: EC: EC started [10784.848110] PM: Restoring platform NVS memory [10784.850256] Enabling non-boot CPUs ... [10784.850320] x86: Booting SMP configuration: [10784.850322] smpboot: Booting Node 0 Processor 1 APIC 0x2 [10784.850611] cache: parent cpu1 should not be sleeping [10784.850930] CPU1 is up [10784.851288] ACPI: Waking up from system sleep state S3 [10784.858696] acpi LNXPOWER:03: Turning ON [10784.897055] acpi LNXPOWER:04: Turning ON [10784.937227] ACPI: EC: interrupt unblocked [10784.959749] ACPI: EC: event unblocked [10784.961351] rtlwifi: rtlwifi: wireless switch is on [10784.962845] sd 0:0:0:0: [sda] Starting disk [10785.205563] usb 1-4: reset high-speed USB device number 2 using xhci_hcd [10785.433244] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 320) [10785.493632] ata2.00: configured for UDMA/100 [10785.657771] usb 1-4.1: reset high-speed USB device number 3 using xhci_hcd [10785.733516] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) [10785.739568] ata1.00: configured for UDMA/100 [10785.838196] usb 1-4.2: reset high-speed USB device number 4 using xhci_hcd [10786.018018] usb 1-4.3: reset full-speed USB device number 5 using xhci_hcd [10786.130705] acpi LNXPOWER:02: Turning OFF [10786.130950] acpi LNXPOWER:01: Turning OFF [10786.131109] acpi LNXPOWER:00: Turning OFF [10786.131176] OOM killer enabled. [10786.131180] Restarting tasks ... done. [10786.186208] PM: suspend exit [10786.278931] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723 [10786.279928] Bluetooth: hci0: RTL: rom_version status=0 version=1 [10786.279931] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_fw.bin [10786.279962] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8723b_config.bin [10786.280006] bluetooth hci0: firmware: failed to load rtl_bt/rtl8723b_config.bin (-2) [10786.280012] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_config.bin failed with error -2 [10786.280023] Bluetooth: hci0: RTL: cfg_sz -2, total sz 22496 [10786.380730] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [10786.383235] Generic PHY r8169-300:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=r8169-300:00, irq=IGNORE) [10786.559411] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready [10786.564001] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [10823.483544] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [10823.553832] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [10825.107028] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [10826.135667] wlp2s0: authenticate with 56:14:73:36:58:7d [10826.179760] wlp2s0: send auth to 56:14:73:36:58:7d (try 1/3) [10826.192255] wlp2s0: authenticated [10826.194739] wlp2s0: associate with 56:14:73:36:58:7d (try 1/3) [10826.205525] wlp2s0: RX AssocResp from 56:14:73:36:58:7d (capab=0x431 status=0 aid=1) [10826.205821] wlp2s0: associated [10826.246410] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [12544.899230] [drm:intel_pipe_update_end [i915]] *ERROR* Atomic update failure on pipe A (start=105512 end=105513) time 392 us, min 763, max 767, scanline start 762, end 781