smartctl version 5.36 [x86_64-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.8 family Device Model: ST3400832AS Serial Number: 4NF0DFZ3 Firmware Version: 3.06 User Capacity: 400�088�457�216 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 7 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sun Mar 8 11:31:08 2009 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 121) The previous self-test completed having the read element of the test failed. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 134) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 052 045 006 Pre-fail Always - 90353939 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 13 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 087 060 030 Pre-fail Always - 504516026 9 Power_On_Hours 0x0032 094 094 000 Old_age Always - 5936 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 14 194 Temperature_Celsius 0x0022 041 049 000 Old_age Always - 41 (Lifetime Min/Max 0/22) 195 Hardware_ECC_Recovered 0x001a 052 045 000 Old_age Always - 90353939 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 190 000 Old_age Always - 10 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 ATA Error Count: 3 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 3 occurred at disk power-on lifetime: 1316 hours (54 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 07 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 e0 00 13:11:25.736 READ DMA ec 00 46 00 00 00 a0 00 13:11:24.798 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:11:24.798 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 a0 00 13:11:27.725 IDENTIFY DEVICE 00 00 08 00 00 00 00 04 13:11:27.724 NOP [Abort queued commands] Error 2 occurred at disk power-on lifetime: 1316 hours (54 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 07 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 e0 00 13:11:25.736 READ DMA ec 00 46 00 00 00 a0 00 13:11:24.798 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:11:24.798 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 a0 00 13:11:24.797 IDENTIFY DEVICE 00 00 01 00 00 00 00 04 13:11:24.744 NOP [Abort queued commands] Error 1 occurred at disk power-on lifetime: 1316 hours (54 days + 20 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 07 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000007 = 7 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 08 00 00 00 e0 00 13:11:12.644 READ DMA ec 00 46 00 00 00 a0 00 13:11:12.322 IDENTIFY DEVICE ef 03 46 00 00 00 a0 00 13:11:11.700 SET FEATURES [Set transfer mode] ec 00 01 01 00 00 a0 00 13:11:11.652 IDENTIFY DEVICE 00 00 01 00 00 00 00 04 13:11:10.710 NOP [Abort queued commands] SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed: read failure 90% 5931 52675887 # 2 Extended offline Completed without error 00% 5789 - # 3 Extended offline Completed without error 00% 5617 - # 4 Extended offline Completed without error 00% 5453 - # 5 Extended offline Completed without error 00% 5288 - # 6 Extended offline Completed without error 00% 5128 - # 7 Extended offline Completed without error 00% 4965 - # 8 Extended offline Completed without error 00% 4782 - # 9 Extended offline Completed without error 00% 4620 - #10 Extended offline Completed without error 00% 4468 - #11 Extended offline Completed without error 00% 4304 - #12 Extended offline Completed without error 00% 4140 - #13 Extended offline Completed without error 00% 3972 - #14 Extended offline Completed without error 00% 3810 - #15 Extended offline Completed without error 00% 3644 - #16 Extended offline Completed without error 00% 3476 - #17 Extended offline Completed without error 00% 3312 - #18 Extended offline Completed without error 00% 3147 - #19 Extended offline Completed without error 00% 3002 - #20 Extended offline Completed without error 00% 2815 - #21 Extended offline Completed without error 00% 2651 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.