[ 0.000000] Linux version 4.9.0-8-amd64 (debian-kernel@lists.debian.org) (gcc version 6.3.0 20170516 (Debian 6.3.0-18+deb9u1) ) #1 SMP Debian 4.9.144-3.1 (2019-02-19) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=f3203236-3047-469c-b769-19f2de04ee82 ro quiet splash [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009cc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ce03fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ce04000-0x000000003ce33fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003ce34000-0x000000003ce6dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ce6e000-0x000000003cf2cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003cf2d000-0x000000003e3b1fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003e3b2000-0x000000003e3b2fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003e3b3000-0x000000003e3bafff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000003e3bb000-0x000000003e50ffff] usable [ 0.000000] BIOS-e820: [mem 0x000000003e510000-0x000000003ec39fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003ec3a000-0x000000003ec70fff] usable [ 0.000000] BIOS-e820: [mem 0x000000003ec71000-0x000000003eff0fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000003eff1000-0x000000003effffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./AM1H-ITX, BIOS P1.40 10/27/2014 [ 0.000000] Kernel/User page tables isolation: disabled [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D6FFF write-protect [ 0.000000] D7000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 000000023f000000 aka 9200M [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT [ 0.000000] e820: update [mem 0x40000000-0xffffffff] usable ==> reserved [ 0.000000] e820: last_pfn = 0x3f000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff9096400fd7e0] [ 0.000000] Base memory trampoline at [ffff909640096000] 96000 size 24576 [ 0.000000] Using GB pages for direct mapping [ 0.000000] BRK [0x1bff34000, 0x1bff34fff] PGTABLE [ 0.000000] BRK [0x1bff35000, 0x1bff35fff] PGTABLE [ 0.000000] BRK [0x1bff36000, 0x1bff36fff] PGTABLE [ 0.000000] BRK [0x1bff37000, 0x1bff37fff] PGTABLE [ 0.000000] BRK [0x1bff38000, 0x1bff38fff] PGTABLE [ 0.000000] BRK [0x1bff39000, 0x1bff39fff] PGTABLE [ 0.000000] BRK [0x1bff3a000, 0x1bff3afff] PGTABLE [ 0.000000] BRK [0x1bff3b000, 0x1bff3bfff] PGTABLE [ 0.000000] BRK [0x1bff3c000, 0x1bff3cfff] PGTABLE [ 0.000000] BRK [0x1bff3d000, 0x1bff3dfff] PGTABLE [ 0.000000] RAMDISK: [mem 0x33b5f000-0x35da6fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 0x000000003CEF2080 00007C (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x000000003CEF7520 00010C (v05 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160831/tbfadt-658) [ 0.000000] ACPI: DSDT 0x000000003CEF2190 00538A (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x000000003CF23E80 000040 [ 0.000000] ACPI: APIC 0x000000003CEF7630 00007E (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x000000003CEF76B0 000044 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 0x000000003CEF76F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 0x000000003CEF7738 000038 (v01 ALASKA A M I 01072009 AMI 00000005) [ 0.000000] ACPI: AAFT 0x000000003CEF7770 0001A5 (v01 ALASKA OEMAAFT 01072009 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x000000003CEF7918 000E58 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000003CEF8770 0046B7 (v02 AMD AGESA 00000002 MSFT 04000000) [ 0.000000] ACPI: CRAT 0x000000003CEFCE28 0003F8 (v01 AMD AGESA 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 0x000000003CEFD220 0006CA (v01 AMD CPMADPS4 00000001 INTL 20051117) [ 0.000000] ACPI: SSDT 0x000000003CEFD8F0 001120 (v01 AMD CPMCMN 00000001 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023effffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23effb000-0x23effffff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023effffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009bfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000003ce03fff] [ 0.000000] node 0: [mem 0x000000003ce34000-0x000000003ce6dfff] [ 0.000000] node 0: [mem 0x000000003e3b2000-0x000000003e3b2fff] [ 0.000000] node 0: [mem 0x000000003e3bb000-0x000000003e50ffff] [ 0.000000] node 0: [mem 0x000000003ec3a000-0x000000003ec70fff] [ 0.000000] node 0: [mem 0x000000003eff1000-0x000000003effffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023effffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff] [ 0.000000] On node 0 totalpages: 1556341 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3995 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 3840 pages used for memmap [ 0.000000] DMA32 zone: 245722 pages, LIFO batch:31 [ 0.000000] Normal zone: 20416 pages used for memmap [ 0.000000] Normal zone: 1306624 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000 [ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ce04000-0x3ce33fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ce6e000-0x3cf2cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x3cf2d000-0x3e3b1fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3e3b3000-0x3e3bafff] [ 0.000000] PM: Registered nosave memory: [mem 0x3e510000-0x3ec39fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3ec71000-0x3eff0fff] [ 0.000000] PM: Registered nosave memory: [mem 0x3f000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xffbfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff] [ 0.000000] e820: [mem 0x3f000000-0xfebfffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] percpu: Embedded 35 pages/cpu @ffff90987ec00000 s105304 r8192 d29864 u524288 [ 0.000000] pcpu-alloc: s105304 r8192 d29864 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1532000 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.9.0-8-amd64 root=UUID=f3203236-3047-469c-b769-19f2de04ee82 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 6009660K/6225364K available (6268K kernel code, 1161K rwdata, 2872K rodata, 1424K init, 656K bss, 215704K reserved, 0K cma-reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4 [ 0.000000] NR_IRQS:33024 nr_irqs:1000 16 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2049.918 MHz processor [ 0.000057] Calibrating delay loop (skipped), value calculated using timer frequency.. 4099.83 BogoMIPS (lpj=8199672) [ 0.000062] pid_max: default: 32768 minimum: 301 [ 0.000089] ACPI: Core revision 20160831 [ 0.015297] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.015382] Security Framework initialized [ 0.015386] Yama: disabled by default; enable with sysctl kernel.yama.* [ 0.015396] AppArmor: AppArmor disabled by boot time parameter [ 0.016173] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.019288] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.020740] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.020758] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes) [ 0.021272] mce: CPU supports 6 MCE banks [ 0.021282] LVT offset 1 assigned for vector 0xf9 [ 0.021291] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.021293] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.021296] Spectre V2 : Mitigation: Full AMD retpoline [ 0.021297] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.021298] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.032018] Freeing SMP alternatives memory: 24K [ 0.039206] ftrace: allocating 25295 entries in 99 pages [ 0.060697] smpboot: Max logical packages: 1 [ 0.061234] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.207675] smpboot: CPU0: AMD Athlon(tm) 5350 APU with Radeon(tm) R3 (family: 0x16, model: 0x0, stepping: 0x1) [ 0.207682] Performance Events: AMD PMU driver. [ 0.207688] ... version: 0 [ 0.207689] ... bit width: 48 [ 0.207690] ... generic registers: 4 [ 0.207691] ... value mask: 0000ffffffffffff [ 0.207692] ... max period: 00007fffffffffff [ 0.207693] ... fixed-purpose events: 0 [ 0.207694] ... event mask: 000000000000000f [ 0.208651] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.208927] x86: Booting SMP configuration: [ 0.208929] .... node #0, CPUs: #1 #2 #3 [ 0.219236] x86: Booted up 1 node, 4 CPUs [ 0.219241] smpboot: Total of 4 processors activated (16399.34 BogoMIPS) [ 0.220684] devtmpfs: initialized [ 0.220802] x86/mm: Memory block size: 128MB [ 0.226848] PM: Registering ACPI NVS region [mem 0x3ce6e000-0x3cf2cfff] (782336 bytes) [ 0.226889] PM: Registering ACPI NVS region [mem 0x3e3b3000-0x3e3bafff] (32768 bytes) [ 0.226989] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.227006] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.227083] pinctrl core: initialized pinctrl subsystem [ 0.227286] NET: Registered protocol family 16 [ 0.235788] cpuidle: using governor ladder [ 0.251729] cpuidle: using governor menu [ 0.251851] ACPI: bus type PCI registered [ 0.251854] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.252022] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.252026] PCI: not using MMCONFIG [ 0.252028] PCI: Using configuration type 1 for base access [ 0.252028] PCI: Using configuration type 1 for extended access [ 0.252563] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.252564] mtrr: probably your BIOS does not setup all CPUs. [ 0.252565] mtrr: corrected configuration. [ 0.268187] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 0.268190] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.268798] ACPI: Added _OSI(Module Device) [ 0.268800] ACPI: Added _OSI(Processor Device) [ 0.268801] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.268802] ACPI: Added _OSI(Processor Aggregator Device) [ 0.269031] ACPI: Executed 1 blocks of module-level executable AML code [ 0.278441] ACPI: Interpreter enabled [ 0.278474] ACPI: (supports S0 S3 S4 S5) [ 0.278476] ACPI: Using IOAPIC for interrupt routing [ 0.278524] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.278601] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.278621] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.288573] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.289167] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.289177] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.289501] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME] [ 0.289808] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability] [ 0.290351] PCI host bridge to bus 0000:00 [ 0.290355] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.290357] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.290359] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.290362] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.290364] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.290366] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window] [ 0.290369] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window] [ 0.290372] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.290383] pci 0000:00:00.0: [1022:1536] type 00 class 0x060000 [ 0.290555] pci 0000:00:01.0: [1002:9830] type 00 class 0x030000 [ 0.290572] pci 0000:00:01.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.290583] pci 0000:00:01.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref] [ 0.290591] pci 0000:00:01.0: reg 0x20: [io 0xf000-0xf0ff] [ 0.290599] pci 0000:00:01.0: reg 0x24: [mem 0xffb00000-0xffb3ffff] [ 0.290607] pci 0000:00:01.0: reg 0x30: [mem 0xffb40000-0xffb5ffff pref] [ 0.290650] pci 0000:00:01.0: supports D1 D2 [ 0.290653] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.290789] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300 [ 0.290804] pci 0000:00:01.1: reg 0x10: [mem 0xffb64000-0xffb67fff 64bit] [ 0.290871] pci 0000:00:01.1: supports D1 D2 [ 0.290991] pci 0000:00:02.0: [1022:1538] type 00 class 0x060000 [ 0.291142] pci 0000:00:02.2: [1022:1439] type 01 class 0x060400 [ 0.291219] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold [ 0.291360] pci 0000:00:02.3: [1022:1439] type 01 class 0x060400 [ 0.291434] pci 0000:00:02.3: PME# supported from D0 D3hot D3cold [ 0.291516] pci 0000:00:02.3: System wakeup disabled by ACPI [ 0.291586] pci 0000:00:02.4: [1022:1439] type 01 class 0x060400 [ 0.291661] pci 0000:00:02.4: PME# supported from D0 D3hot D3cold [ 0.291748] pci 0000:00:02.4: System wakeup disabled by ACPI [ 0.291814] pci 0000:00:02.5: [1022:1439] type 01 class 0x060400 [ 0.291888] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold [ 0.291969] pci 0000:00:02.5: System wakeup disabled by ACPI [ 0.292057] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330 [ 0.292079] pci 0000:00:10.0: reg 0x10: [mem 0xffb68000-0xffb69fff 64bit] [ 0.292176] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold [ 0.292261] pci 0000:00:10.0: System wakeup disabled by ACPI [ 0.292335] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601 [ 0.292352] pci 0000:00:11.0: reg 0x10: [io 0xf140-0xf147] [ 0.292361] pci 0000:00:11.0: reg 0x14: [io 0xf130-0xf133] [ 0.292370] pci 0000:00:11.0: reg 0x18: [io 0xf120-0xf127] [ 0.292379] pci 0000:00:11.0: reg 0x1c: [io 0xf110-0xf113] [ 0.292387] pci 0000:00:11.0: reg 0x20: [io 0xf100-0xf10f] [ 0.292396] pci 0000:00:11.0: reg 0x24: [mem 0xffb6e000-0xffb6e3ff] [ 0.292443] pci 0000:00:11.0: PME# supported from D3hot [ 0.292574] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310 [ 0.292587] pci 0000:00:12.0: reg 0x10: [mem 0xffb6d000-0xffb6dfff] [ 0.292710] pci 0000:00:12.0: System wakeup disabled by ACPI [ 0.292776] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320 [ 0.292791] pci 0000:00:12.2: reg 0x10: [mem 0xffb6c000-0xffb6c0ff] [ 0.292863] pci 0000:00:12.2: supports D1 D2 [ 0.292866] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292940] pci 0000:00:12.2: System wakeup disabled by ACPI [ 0.293008] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310 [ 0.293021] pci 0000:00:13.0: reg 0x10: [mem 0xffb6b000-0xffb6bfff] [ 0.293144] pci 0000:00:13.0: System wakeup disabled by ACPI [ 0.293210] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320 [ 0.293226] pci 0000:00:13.2: reg 0x10: [mem 0xffb6a000-0xffb6a0ff] [ 0.293298] pci 0000:00:13.2: supports D1 D2 [ 0.293300] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.293376] pci 0000:00:13.2: System wakeup disabled by ACPI [ 0.293443] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500 [ 0.293613] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300 [ 0.293631] pci 0000:00:14.2: reg 0x10: [mem 0xffb60000-0xffb63fff 64bit] [ 0.293693] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.293766] pci 0000:00:14.2: System wakeup disabled by ACPI [ 0.293827] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100 [ 0.294012] pci 0000:00:18.0: [1022:1530] type 00 class 0x060000 [ 0.294143] pci 0000:00:18.1: [1022:1531] type 00 class 0x060000 [ 0.294273] pci 0000:00:18.2: [1022:1532] type 00 class 0x060000 [ 0.294401] pci 0000:00:18.3: [1022:1533] type 00 class 0x060000 [ 0.294536] pci 0000:00:18.4: [1022:1534] type 00 class 0x060000 [ 0.294665] pci 0000:00:18.5: [1022:1535] type 00 class 0x060000 [ 0.294874] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601 [ 0.294892] pci 0000:01:00.0: reg 0x10: [io 0xe050-0xe057] [ 0.294903] pci 0000:01:00.0: reg 0x14: [io 0xe040-0xe043] [ 0.294914] pci 0000:01:00.0: reg 0x18: [io 0xe030-0xe037] [ 0.294925] pci 0000:01:00.0: reg 0x1c: [io 0xe020-0xe023] [ 0.294936] pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe01f] [ 0.294947] pci 0000:01:00.0: reg 0x24: [mem 0xffa00000-0xffa001ff] [ 0.303803] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.303812] pci 0000:00:02.2: bridge window [io 0xe000-0xefff] [ 0.303816] pci 0000:00:02.2: bridge window [mem 0xffa00000-0xffafffff] [ 0.303980] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.304002] pci 0000:02:00.0: reg 0x10: [io 0xd000-0xd0ff] [ 0.304029] pci 0000:02:00.0: reg 0x18: [mem 0xff900000-0xff900fff 64bit] [ 0.304046] pci 0000:02:00.0: reg 0x20: [mem 0xd0800000-0xd0803fff 64bit pref] [ 0.304149] pci 0000:02:00.0: supports D1 D2 [ 0.304151] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.304219] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.315753] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.315762] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff] [ 0.315766] pci 0000:00:02.3: bridge window [mem 0xff900000-0xff9fffff] [ 0.315772] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.315903] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330 [ 0.315932] pci 0000:03:00.0: reg 0x10: [mem 0xff800000-0xff807fff 64bit] [ 0.316074] pci 0000:03:00.0: PME# supported from D3cold [ 0.327801] pci 0000:00:02.4: PCI bridge to [bus 03] [ 0.327813] pci 0000:00:02.4: bridge window [mem 0xff800000-0xff8fffff] [ 0.327938] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000 [ 0.327965] pci 0000:04:00.0: reg 0x10: [mem 0xff700000-0xff77ffff 64bit] [ 0.328013] pci 0000:04:00.0: reg 0x30: [mem 0xff780000-0xff78ffff pref] [ 0.328099] pci 0000:04:00.0: supports D1 D2 [ 0.328101] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.339751] pci 0000:00:02.5: PCI bridge to [bus 04] [ 0.339762] pci 0000:00:02.5: bridge window [mem 0xff700000-0xff7fffff] [ 0.340473] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 *10 11 14 15) [ 0.340597] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 *5 7 10 11 14 15) [ 0.340721] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 *11 14 15) [ 0.340847] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *5 7 10 11 14 15) [ 0.340951] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 *11 14 15) [ 0.341034] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 *10 11 14 15) [ 0.341117] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0 [ 0.341200] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0 [ 0.341838] vgaarb: setting as boot device: PCI:0000:00:01.0 [ 0.341840] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.341848] vgaarb: loaded [ 0.341849] vgaarb: bridge control possible 0000:00:01.0 [ 0.342034] PCI: Using ACPI for IRQ routing [ 0.349066] PCI: pci_cache_line_size set to 64 bytes [ 0.349135] e820: reserve RAM buffer [mem 0x0009cc00-0x0009ffff] [ 0.349137] e820: reserve RAM buffer [mem 0x3ce04000-0x3fffffff] [ 0.349139] e820: reserve RAM buffer [mem 0x3ce6e000-0x3fffffff] [ 0.349141] e820: reserve RAM buffer [mem 0x3e3b3000-0x3fffffff] [ 0.349143] e820: reserve RAM buffer [mem 0x3e510000-0x3fffffff] [ 0.349144] e820: reserve RAM buffer [mem 0x3ec71000-0x3fffffff] [ 0.349146] e820: reserve RAM buffer [mem 0x3f000000-0x3fffffff] [ 0.349147] e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff] [ 0.349473] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.349478] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.351548] clocksource: Switched to clocksource hpet [ 0.364630] VFS: Disk quotas dquot_6.6.0 [ 0.364695] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.364869] pnp: PnP ACPI init [ 0.365116] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.365122] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.365277] system 00:01: [mem 0x40000000-0xbfffffff] has been reserved [ 0.365281] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365488] system 00:02: [io 0x0290-0x029f] has been reserved [ 0.365492] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365572] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.365633] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.365750] system 00:05: [io 0x04d0-0x04d1] has been reserved [ 0.365754] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.366046] pnp 00:06: [dma 0 disabled] [ 0.366134] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.366665] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.366667] system 00:07: [io 0x040b] has been reserved [ 0.366670] system 00:07: [io 0x04d6] has been reserved [ 0.366673] system 00:07: [io 0x0c00-0x0c01] has been reserved [ 0.366675] system 00:07: [io 0x0c14] has been reserved [ 0.366678] system 00:07: [io 0x0c50-0x0c51] has been reserved [ 0.366680] system 00:07: [io 0x0c52] has been reserved [ 0.366683] system 00:07: [io 0x0c6c] has been reserved [ 0.366685] system 00:07: [io 0x0c6f] has been reserved [ 0.366688] system 00:07: [io 0x0cd0-0x0cd1] has been reserved [ 0.366690] system 00:07: [io 0x0cd2-0x0cd3] has been reserved [ 0.366693] system 00:07: [io 0x0cd4-0x0cd5] has been reserved [ 0.366695] system 00:07: [io 0x0cd6-0x0cd7] has been reserved [ 0.366698] system 00:07: [io 0x0cd8-0x0cdf] has been reserved [ 0.366700] system 00:07: [io 0x0800-0x089f] has been reserved [ 0.366703] system 00:07: [io 0x0b20-0x0b3f] has been reserved [ 0.366705] system 00:07: [io 0x0900-0x090f] has been reserved [ 0.366708] system 00:07: [io 0x0910-0x091f] has been reserved [ 0.366711] system 00:07: [io 0xfe00-0xfefe] has been reserved [ 0.366715] system 00:07: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.366718] system 00:07: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.366720] system 00:07: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.366723] system 00:07: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.366726] system 00:07: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.366729] system 00:07: [mem 0xfed00000-0xfed00fff] could not be reserved [ 0.366732] system 00:07: [mem 0xffc00000-0xffffffff] has been reserved [ 0.366736] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.367144] pnp: PnP ACPI: found 8 devices [ 0.375537] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.375588] pci 0000:00:02.2: PCI bridge to [bus 01] [ 0.375592] pci 0000:00:02.2: bridge window [io 0xe000-0xefff] [ 0.375597] pci 0000:00:02.2: bridge window [mem 0xffa00000-0xffafffff] [ 0.375605] pci 0000:00:02.3: PCI bridge to [bus 02] [ 0.375608] pci 0000:00:02.3: bridge window [io 0xd000-0xdfff] [ 0.375613] pci 0000:00:02.3: bridge window [mem 0xff900000-0xff9fffff] [ 0.375617] pci 0000:00:02.3: bridge window [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.375622] pci 0000:00:02.4: PCI bridge to [bus 03] [ 0.375627] pci 0000:00:02.4: bridge window [mem 0xff800000-0xff8fffff] [ 0.375635] pci 0000:00:02.5: PCI bridge to [bus 04] [ 0.375640] pci 0000:00:02.5: bridge window [mem 0xff700000-0xff7fffff] [ 0.375649] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 0.375652] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 0.375654] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 0.375656] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window] [ 0.375658] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 0.375660] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window] [ 0.375663] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window] [ 0.375665] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.375667] pci_bus 0000:01: resource 1 [mem 0xffa00000-0xffafffff] [ 0.375670] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 0.375672] pci_bus 0000:02: resource 1 [mem 0xff900000-0xff9fffff] [ 0.375674] pci_bus 0000:02: resource 2 [mem 0xd0800000-0xd08fffff 64bit pref] [ 0.375676] pci_bus 0000:03: resource 1 [mem 0xff800000-0xff8fffff] [ 0.375679] pci_bus 0000:04: resource 1 [mem 0xff700000-0xff7fffff] [ 0.375848] NET: Registered protocol family 2 [ 0.376170] TCP established hash table entries: 65536 (order: 7, 524288 bytes) [ 0.376420] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.376714] TCP: Hash tables configured (established 65536 bind 65536) [ 0.376779] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.376830] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.376985] NET: Registered protocol family 1 [ 0.377016] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.748147] PCI: CLS 64 bytes, default 64 [ 0.748253] Unpacking initramfs... [ 1.580789] Freeing initrd memory: 35104K [ 1.580875] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.580880] software IO TLB [mem 0x38e04000-0x3ce04000] (64MB) mapped at [ffff909678e04000-ffff90967ce03fff] [ 1.580938] perf: AMD NB counters detected [ 1.580941] perf: AMD L2I counters detected [ 1.581181] LVT offset 0 assigned for vector 0x400 [ 1.581246] perf: AMD IBS detected (0x000000ff) [ 1.581850] audit: initializing netlink subsys (disabled) [ 1.581886] audit: type=2000 audit(1571553063.468:1): initialized [ 1.582673] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 1.582747] zbud: loaded [ 1.584140] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.584203] io scheduler noop registered [ 1.584204] io scheduler deadline registered [ 1.584226] io scheduler cfq registered (default) [ 1.584851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.584862] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.585375] GHES: HEST is not enabled! [ 1.585471] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.605937] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.606576] Linux agpgart interface v0.103 [ 1.606931] AMD IOMMUv2 driver by Joerg Roedel [ 1.606932] AMD IOMMUv2 functionality not available on this system [ 1.607451] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.610184] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.610192] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.610422] mousedev: PS/2 mouse device common for all mice [ 1.610488] rtc_cmos 00:04: RTC can wake from S4 [ 1.610627] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.610653] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.610759] ledtrig-cpu: registered to indicate activity on CPUs [ 1.611155] NET: Registered protocol family 10 [ 1.611475] mip6: Mobile IPv6 [ 1.611477] NET: Registered protocol family 17 [ 1.611482] mpls_gso: MPLS GSO support [ 1.611788] microcode: microcode updated early to new patch_level=0x0700010f [ 1.611830] microcode: CPU0: patch_level=0x0700010f [ 1.611835] microcode: CPU1: patch_level=0x0700010f [ 1.611846] microcode: CPU2: patch_level=0x0700010f [ 1.611858] microcode: CPU3: patch_level=0x0700010f [ 1.611914] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 1.612140] registered taskstats version 1 [ 1.612165] zswap: loaded using pool lzo/zbud [ 1.612356] ima: No TPM chip found, activating TPM-bypass! [ 1.612360] ima: Allocated hash algorithm: sha256 [ 1.612810] rtc_cmos 00:04: setting system clock to 2019-10-20 06:31:04 UTC (1571553064) [ 1.612923] PM: Hibernation image not present or could not be loaded. [ 2.206074] Freeing unused kernel memory: 1424K [ 2.206077] Write protecting the kernel read-only data: 12288k [ 2.208799] Freeing unused kernel memory: 1908K [ 2.213771] Freeing unused kernel memory: 1224K [ 2.223525] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.242994] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.243140] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.243160] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.283202] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 2.283210] ACPI: Power Button [PWRB] [ 2.283583] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 2.283586] ACPI: Power Button [PWRF] [ 2.292868] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.294653] SCSI subsystem initialized [ 2.295660] [drm] Initialized [ 2.295787] ACPI: bus type USB registered [ 2.295839] usbcore: registered new interface driver usbfs [ 2.295865] usbcore: registered new interface driver hub [ 2.295928] usbcore: registered new device driver usb [ 2.299071] libata version 3.00 loaded. [ 2.299589] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.299600] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 [ 2.299838] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410 [ 2.300151] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.300154] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.300157] usb usb1: Product: xHCI Host Controller [ 2.300159] usb usb1: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd [ 2.300160] usb usb1: SerialNumber: 0000:00:10.0 [ 2.300427] hub 1-0:1.0: USB hub found [ 2.300445] hub 1-0:1.0: 2 ports detected [ 2.300668] xhci_hcd 0000:00:10.0: xHCI Host Controller [ 2.300677] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 [ 2.302152] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.302436] ehci-pci: EHCI PCI platform driver [ 2.303307] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.303386] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.303390] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.303392] usb usb2: Product: xHCI Host Controller [ 2.303394] usb usb2: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd [ 2.303396] usb usb2: SerialNumber: 0000:00:10.0 [ 2.303840] hub 2-0:1.0: USB hub found [ 2.303859] hub 2-0:1.0: 2 ports detected [ 2.304290] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.304299] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 2.304763] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffb063c0c75000, d0:50:99:1c:c6:d2, XID 0c000800 IRQ 34 [ 2.304766] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.304880] ahci 0000:00:11.0: version 3.0 [ 2.305128] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.305166] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.305171] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio slum part [ 2.308075] scsi host0: ahci [ 2.308810] scsi host1: ahci [ 2.308904] ata1: SATA max UDMA/133 abar m1024@0xffb6e000 port 0xffb6e100 irq 36 [ 2.308907] ata2: SATA max UDMA/133 abar m1024@0xffb6e000 port 0xffb6e180 irq 36 [ 2.309218] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled [ 2.309263] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode [ 2.309266] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs [ 2.310298] scsi host2: ahci [ 2.310618] scsi host3: ahci [ 2.310706] ata3: SATA max UDMA/133 abar m512@0xffa00000 port 0xffa00100 irq 38 [ 2.310709] ata4: SATA max UDMA/133 abar m512@0xffa00000 port 0xffa00180 irq 38 [ 2.315970] [drm] radeon kernel modesetting enabled. [ 2.319985] AVX version of gcm_enc/dec engaged. [ 2.319987] AES CTR mode by8 optimization enabled [ 2.342951] r8169 0000:02:00.0 enp2s0: renamed from eth0 [ 2.364860] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x10000410 [ 2.365159] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.365162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.365164] usb usb3: Product: xHCI Host Controller [ 2.365166] usb usb3: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd [ 2.365167] usb usb3: SerialNumber: 0000:03:00.0 [ 2.365409] hub 3-0:1.0: USB hub found [ 2.365424] hub 3-0:1.0: 2 ports detected [ 2.365614] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 2.365620] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 2.365637] ehci-pci 0000:00:12.2: EHCI Host Controller [ 2.365647] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5 [ 2.365652] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.365662] ehci-pci 0000:00:12.2: debug port 1 [ 2.365675] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.365713] ehci-pci 0000:00:12.2: irq 17, io mem 0xffb6c000 [ 2.365715] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 2.365718] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.365720] usb usb4: Product: xHCI Host Controller [ 2.365721] usb usb4: Manufacturer: Linux 4.9.0-8-amd64 xhci-hcd [ 2.365723] usb usb4: SerialNumber: 0000:03:00.0 [ 2.365904] hub 4-0:1.0: USB hub found [ 2.365917] hub 4-0:1.0: 2 ports detected [ 2.379778] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.380008] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.380011] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.380013] usb usb5: Product: EHCI Host Controller [ 2.380015] usb usb5: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd [ 2.380017] usb usb5: SerialNumber: 0000:00:12.2 [ 2.380288] hub 5-0:1.0: USB hub found [ 2.380310] hub 5-0:1.0: 4 ports detected [ 2.380770] ehci-pci 0000:00:13.2: EHCI Host Controller [ 2.380780] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6 [ 2.380787] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.380796] ehci-pci 0000:00:13.2: debug port 1 [ 2.380839] ehci-pci 0000:00:13.2: irq 17, io mem 0xffb6a000 [ 2.395780] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.396032] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.396035] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.396037] usb usb6: Product: EHCI Host Controller [ 2.396039] usb usb6: Manufacturer: Linux 4.9.0-8-amd64 ehci_hcd [ 2.396041] usb usb6: SerialNumber: 0000:00:13.2 [ 2.396316] hub 6-0:1.0: USB hub found [ 2.396342] hub 6-0:1.0: 4 ports detected [ 2.396691] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 2.396694] piix4_smbus 0000:00:14.0: Using register 0x2e for SMBus port selection [ 2.396861] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 [ 2.397212] ohci-pci: OHCI PCI platform driver [ 2.397402] ohci-pci 0000:00:12.0: OHCI PCI host controller [ 2.397411] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 7 [ 2.397459] ohci-pci 0000:00:12.0: irq 18, io mem 0xffb6d000 [ 2.459835] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.459839] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.459841] usb usb7: Product: OHCI PCI host controller [ 2.459843] usb usb7: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd [ 2.459845] usb usb7: SerialNumber: 0000:00:12.0 [ 2.460184] hub 7-0:1.0: USB hub found [ 2.460198] hub 7-0:1.0: 4 ports detected [ 2.460621] ohci-pci 0000:00:13.0: OHCI PCI host controller [ 2.460631] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8 [ 2.460667] ohci-pci 0000:00:13.0: irq 18, io mem 0xffb6b000 [ 2.523833] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.523837] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.523839] usb usb8: Product: OHCI PCI host controller [ 2.523841] usb usb8: Manufacturer: Linux 4.9.0-8-amd64 ohci_hcd [ 2.523843] usb usb8: SerialNumber: 0000:00:13.0 [ 2.524177] hub 8-0:1.0: USB hub found [ 2.524191] hub 8-0:1.0: 4 ports detected [ 2.527220] Found CRAT image with size=1016 [ 2.527225] Parsing CRAT table with 1 nodes [ 2.527227] Found CU entry in CRAT table with proximity_domain=0 caps=0 [ 2.527228] CU CPU: cores=4 id_base=0 [ 2.527229] Found memory entry in CRAT table with proximity_domain=0 [ 2.527230] Found memory entry in CRAT table with proximity_domain=0 [ 2.527231] Found memory entry in CRAT table with proximity_domain=0 [ 2.527232] Found memory entry in CRAT table with proximity_domain=0 [ 2.527233] Found cache entry in CRAT table with processor_id=0 [ 2.527234] Found cache entry in CRAT table with processor_id=0 [ 2.527235] Found cache entry in CRAT table with processor_id=0 [ 2.527236] Found cache entry in CRAT table with processor_id=1 [ 2.527237] Found cache entry in CRAT table with processor_id=1 [ 2.527238] Found cache entry in CRAT table with processor_id=1 [ 2.527239] Found cache entry in CRAT table with processor_id=2 [ 2.527240] Found cache entry in CRAT table with processor_id=2 [ 2.527240] Found cache entry in CRAT table with processor_id=2 [ 2.527241] Found cache entry in CRAT table with processor_id=3 [ 2.527242] Found cache entry in CRAT table with processor_id=3 [ 2.527243] Found cache entry in CRAT table with processor_id=3 [ 2.527244] Creating topology SYSFS entries [ 2.527280] Finished initializing topology ret=0 [ 2.527309] kfd kfd: Initialized module [ 2.528041] [drm] initializing kernel modesetting (KABINI 0x1002:0x9830 0x1849:0x9830 0x00). [ 2.528067] [drm] register mmio base: 0xFFB00000 [ 2.528068] [drm] register mmio size: 262144 [ 2.528074] [drm] doorbell mmio base: 0xD0000000 [ 2.528074] [drm] doorbell mmio size: 8388608 [ 2.528133] ATOM BIOS: AMD [ 2.528222] radeon 0000:00:01.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used) [ 2.528225] radeon 0000:00:01.0: GTT: 2048M 0x0000000080000000 - 0x00000000FFFFFFFF [ 2.528230] [drm] Detected VRAM RAM=2048M, BAR=256M [ 2.528231] [drm] RAM width 128bits DDR [ 2.528347] [TTM] Zone kernel: Available graphics memory: 3024672 kiB [ 2.528348] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 2.528349] [TTM] Initializing pool allocator [ 2.528357] [TTM] Initializing DMA pool allocator [ 2.528392] [drm] radeon: 2048M of VRAM memory ready [ 2.528394] [drm] radeon: 2048M of GTT memory ready. [ 2.528416] [drm] Loading kabini Microcode [ 2.528454] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_pfp.bin [ 2.528483] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_me.bin [ 2.528510] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_ce.bin [ 2.528541] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_mec.bin [ 2.528570] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_rlc.bin [ 2.528594] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/kabini_sdma.bin [ 2.528599] [drm] Internal thermal controller without fan control [ 2.529973] [drm] radeon: dpm initialized [ 2.530118] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/bonaire_uvd.bin [ 2.530122] [drm] Found UVD firmware Version: 1.64 Family ID: 9 [ 2.530212] radeon 0000:00:01.0: firmware: direct-loading firmware radeon/BONAIRE_vce.bin [ 2.532071] [drm] Found VCE firmware/feedback version 40.2.2 / 15! [ 2.532084] [drm] GART: num cpu pages 524288, num gpu pages 524288 [ 2.560919] [drm] PCIE GART of 2048M enabled (table at 0x000000000030E000). [ 2.561183] radeon 0000:00:01.0: WB enabled [ 2.561203] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff90986edcfc00 [ 2.561206] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff90986edcfc04 [ 2.561209] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff90986edcfc08 [ 2.561211] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff90986edcfc0c [ 2.561214] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff90986edcfc10 [ 2.562094] radeon 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000078d30 and cpu addr 0xffffb063c1438d30 [ 2.562428] radeon 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000080000c18 and cpu addr 0xffff90986edcfc18 [ 2.562431] radeon 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000080000c1c and cpu addr 0xffff90986edcfc1c [ 2.562434] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.562434] [drm] Driver supports precise vblank timestamp query. [ 2.562503] radeon 0000:00:01.0: radeon: using MSI. [ 2.562541] [drm] radeon: irq initialized. [ 2.568563] [drm] ring test on 0 succeeded in 2 usecs [ 2.568659] [drm] ring test on 1 succeeded in 3 usecs [ 2.568684] [drm] ring test on 2 succeeded in 3 usecs [ 2.569244] [drm] ring test on 3 succeeded in 4 usecs [ 2.569253] [drm] ring test on 4 succeeded in 4 usecs [ 2.607652] tsc: Refined TSC clocksource calibration: 2049.999 MHz [ 2.607661] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1d8cae5ad53, max_idle_ns: 440795237019 ns [ 2.614949] [drm] ring test on 5 succeeded in 2 usecs [ 2.627678] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.634812] [drm] UVD initialized successfully. [ 2.707675] usb 5-4: new high-speed USB device number 2 using ehci-pci [ 2.744021] [drm] ring test on 6 succeeded in 16 usecs [ 2.744032] [drm] ring test on 7 succeeded in 3 usecs [ 2.744032] [drm] VCE initialized successfully. [ 2.746692] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.775390] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610 [ 2.775393] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.775395] usb 1-1: Product: USB2.0 Hub [ 2.775397] usb 1-1: Manufacturer: GenesysLogic [ 2.776794] hub 1-1:1.0: USB hub found [ 2.777503] hub 1-1:1.0: 4 ports detected [ 2.783697] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.784300] ata1.00: ATA-10: WDC WD20SPZX-00CRAT0, 01.01A01, max UDMA/133 [ 2.784302] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.785001] ata1.00: configured for UDMA/133 [ 2.785363] scsi 0:0:0:0: Direct-Access ATA WDC WD20SPZX-00C 1A01 PQ: 0 ANSI: 5 [ 2.787840] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.787843] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.790089] ata2.00: ATAPI: hp HLDS BDRE BU40N, BW41, max UDMA/133 [ 2.793022] ata2.00: configured for UDMA/133 [ 2.793072] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 2.794356] ata3.00: ATA-8: ST2000LM003 HN-M201RAD, 2BC10001, max UDMA/133 [ 2.794359] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 2.800901] ata3.00: configured for UDMA/133 [ 2.969772] usb 5-4: New USB device found, idVendor=046d, idProduct=09a4 [ 2.969776] usb 5-4: New USB device strings: Mfr=0, Product=0, SerialNumber=2 [ 2.969778] usb 5-4: SerialNumber: AE48E442 [ 3.043854] usb 8-1: new full-speed USB device number 2 using ohci-pci [ 3.067711] usb 1-1.2: new low-speed USB device number 3 using xhci_hcd [ 3.187820] usb 1-1.2: New USB device found, idVendor=04d9, idProduct=a06b [ 3.187824] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.187826] usb 1-1.2: Product: Wireless USB Device [ 3.187828] usb 1-1.2: Manufacturer: HOLTEK [ 3.191978] hidraw: raw HID events driver (C) Jiri Kosina [ 3.221567] usbcore: registered new interface driver usbhid [ 3.221570] usbhid: USB HID core driver [ 3.222855] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:04D9:A06B.0001/input/input5 [ 3.232767] usb 8-1: New USB device found, idVendor=0489, idProduct=e036 [ 3.232771] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.232774] usb 8-1: Product: Bluetooth USB Host Controller [ 3.232776] usb 8-1: Manufacturer: Atheros Communications [ 3.232778] usb 8-1: SerialNumber: Alaska Day 2006 [ 3.247887] [drm] ib test on ring 1 succeeded in 0 usecs [ 3.247946] [drm] ib test on ring 2 succeeded in 0 usecs [ 3.248008] [drm] ib test on ring 3 succeeded in 0 usecs [ 3.248068] [drm] ib test on ring 4 succeeded in 0 usecs [ 3.280163] hid-generic 0003:04D9:A06B.0001: input,hidraw0: USB HID v1.10 Keyboard [HOLTEK Wireless USB Device] on usb-0000:00:10.0-1.2/input0 [ 3.280653] input: HOLTEK Wireless USB Device as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:04D9:A06B.0002/input/input6 [ 3.340266] hid-generic 0003:04D9:A06B.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [HOLTEK Wireless USB Device] on usb-0000:00:10.0-1.2/input1 [ 3.632085] clocksource: Switched to clocksource tsc [ 3.791920] [drm] ib test on ring 5 succeeded [ 3.812551] [drm] ib test on ring 6 succeeded [ 3.813182] [drm] ib test on ring 7 succeeded [ 3.813820] [drm] Radeon Display Connectors [ 3.813821] [drm] Connector 0: [ 3.813822] [drm] HDMI-A-1 [ 3.813823] [drm] HPD1 [ 3.813825] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c [ 3.813826] [drm] Encoders: [ 3.813827] [drm] DFP1: INTERNAL_UNIPHY [ 3.813828] [drm] Connector 1: [ 3.813828] [drm] HDMI-A-2 [ 3.813829] [drm] HPD2 [ 3.813831] [drm] DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 0x654c [ 3.813832] [drm] Encoders: [ 3.813832] [drm] DFP2: INTERNAL_UNIPHY [ 3.813833] [drm] Connector 2: [ 3.813834] [drm] VGA-1 [ 3.813836] [drm] DDC: 0x65c0 0x65c0 0x65c4 0x65c4 0x65c8 0x65c8 0x65cc 0x65cc [ 3.813836] [drm] Encoders: [ 3.813837] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.964759] [drm] fb mappable at 0xC0722000 [ 3.964761] [drm] vram apper at 0xC0000000 [ 3.964762] [drm] size 33177600 [ 3.964764] [drm] fb depth is 24 [ 3.964764] [drm] pitch is 15360 [ 3.964977] fbcon: radeondrmfb (fb0) is primary device [ 4.059361] Console: switching to colour frame buffer device 240x67 [ 4.069354] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device [ 4.091050] [drm] Initialized radeon 2.49.0 20080528 for 0000:00:01.0 on minor 0 [ 8.488054] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 8.495594] ata2.00: configured for UDMA/133 [ 8.497871] ata2.00: failed to clear UNIT ATTENTION (err_mask=0x1) [ 8.497876] ata2: limiting SATA link speed to 1.5 Gbps [ 8.497878] ata2.00: limiting speed to UDMA/133:PIO3 [ 14.120304] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 14.127898] ata2.00: configured for UDMA/133 [ 35.165161] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 35.165240] ata2.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in Inquiry 12 00 00 00 24 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 35.165364] ata2.00: status: { DRDY } [ 35.165398] ata2: hard resetting link [ 35.637143] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 35.644497] ata2.00: configured for UDMA/133 [ 35.646845] ata2: EH complete [ 35.757421] scsi 1:0:0:0: CD-ROM hp HLDS BDRE BU40N BW41 PQ: 0 ANSI: 5 [ 35.771241] scsi 2:0:0:0: Direct-Access ATA ST2000LM003 HN-M 0001 PQ: 0 ANSI: 5 [ 35.807211] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 35.807215] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 35.807249] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB) [ 35.807252] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 35.807364] sd 2:0:0:0: [sdb] Write Protect is off [ 35.807366] sd 0:0:0:0: [sda] Write Protect is off [ 35.807368] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 35.807370] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 35.807413] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 35.807416] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 36.030213] sdb: sdb1 sdb4 [ 36.031124] sd 2:0:0:0: [sdb] Attached SCSI disk [ 36.117227] ata4: SATA link down (SStatus 0 SControl 300) [ 36.171086] sda: sda1 sda2 sda3 [ 36.171996] sd 0:0:0:0: [sda] Attached SCSI disk [ 36.185043] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen [ 36.185114] ata2.00: irq_stat 0x08000000, interface fatal error [ 36.185170] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 4 Test Unit Ready 00 00 00 00 00 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 36.185297] ata2.00: status: { DRDY } [ 36.185331] ata2: hard resetting link [ 36.429587] random: fast init done [ 36.661170] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 36.666477] ata2.00: configured for UDMA/133 [ 36.666822] ata2: EH complete [ 36.677214] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 36.677289] ata2.00: irq_stat 0x08000000, interface fatal error [ 36.677337] ata2: SError: { Handshk } [ 36.677378] ata2.00: cmd a0/01:00:00:80:00/00:00:00:00:00/a0 tag 5 dma 16512 in Mode Sense(10) 5a 00 2a 00 00 00 00 00 80 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 36.677519] ata2.00: status: { DRDY ERR } [ 36.677555] ata2: hard resetting link [ 37.149196] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 37.149203] ata2.00: link online but device misclassified [ 42.321393] ata2.00: qc timeout (cmd 0xa1) [ 42.321402] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 42.321405] ata2.00: revalidation failed (errno=-5) [ 42.321466] ata2: hard resetting link [ 42.793416] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 42.798000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 42.798003] ata2.00: revalidation failed (errno=-5) [ 42.798062] ata2.00: limiting speed to UDMA/133:PIO2 [ 47.953686] ata2: hard resetting link [ 48.425654] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 48.432990] ata2.00: configured for UDMA/133 [ 48.435355] ata2: EH complete [ 48.438363] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 48.438369] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 48.438698] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 78.942894] ata2.00: limiting speed to UDMA/100:PIO2 [ 78.942899] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 78.942980] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 9 pio 16392 in Get event status notification 4a 01 00 00 10 00 00 00 08 00res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) [ 78.943128] ata2.00: status: { DRDY } [ 78.943162] ata2: hard resetting link [ 79.414886] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 79.422457] ata2.00: configured for UDMA/100 [ 79.424748] ata2: EH complete [ 79.434881] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen [ 79.434953] ata2.00: irq_stat 0x08000000, interface fatal error [ 79.435010] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 11 dma 16640 in Inquiry 12 01 00 00 ff 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 79.435141] ata2.00: status: { DRDY ERR } [ 79.435178] ata2: hard resetting link [ 79.906887] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 79.914153] ata2.00: configured for UDMA/100 [ 79.914196] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 85.075136] ata2: hard resetting link [ 85.547108] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 85.554465] ata2.00: configured for UDMA/100 [ 85.557070] ata2: EH complete [ 85.567147] ata2.00: limiting speed to UDMA/33:PIO2 [ 85.567150] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen [ 85.567215] ata2.00: irq_stat 0x08000000, interface fatal error [ 85.567272] ata2.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 13 pio 16392 in Get event status notification 4a 01 00 00 10 00 00 00 08 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 85.567424] ata2.00: status: { DRDY ERR } [ 85.567462] ata2: hard resetting link [ 86.039123] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 86.046391] ata2.00: configured for UDMA/33 [ 86.048659] ata2: EH complete [ 86.079281] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 86.079351] ata2.00: irq_stat 0x40000001 [ 86.079394] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 17 Test Unit Ready 00 00 00 00 00 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [ 86.079520] ata2.00: status: { DRDY ERR } [ 86.079556] ata2: hard resetting link [ 86.551154] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 86.558479] ata2.00: configured for UDMA/33 [ 86.561140] ata2: EH complete [ 86.571199] ata2.00: limiting speed to PIO2 [ 86.571204] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 86.571278] ata2.00: irq_stat 0x0c000000, interface fatal error [ 86.571327] ata2: SError: { Handshk } [ 86.571368] ata2.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 19 dma 16640 in Inquiry 12 01 00 00 ff 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 86.571498] ata2.00: status: { DRDY ERR } [ 86.571534] ata2: hard resetting link [ 87.043209] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 87.050458] ata2.00: configured for PIO2 [ 87.052736] ata2: EH complete [ 87.079218] ata2.00: limiting speed to PIO1 [ 87.079222] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400000 action 0x6 frozen [ 87.079297] ata2.00: irq_stat 0x08000000, interface fatal error [ 87.079345] ata2: SError: { Handshk } [ 87.079387] ata2.00: cmd a0/00:00:00:00:01/00:00:00:00:00/a0 tag 23 pio 16640 in Inquiry 12 01 00 00 ff 00res 50/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x10 (ATA bus error) [ 87.079517] ata2.00: status: { DRDY } [ 87.079550] ata2: hard resetting link [ 87.551193] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 87.558453] ata2.00: configured for PIO1 [ 87.560736] ata2: EH complete [ 87.575320] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 87.575391] ata2.00: irq_stat 0x40000001 [ 87.575434] ata2.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 25 Test Unit Ready 00 00 00 00 00 00res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [ 87.575560] ata2.00: status: { DRDY ERR } [ 87.575596] ata2: hard resetting link [ 88.047202] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 88.054439] ata2.00: configured for PIO1 [ 88.056710] ata2: EH complete [ 88.071353] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 88.071424] ata2.00: irq_stat 0x40000001 [ 88.071467] ata2.00: cmd a0/00:00:00:00:01/00:00:00:00:00/a0 tag 27 pio 16640 in Inquiry 12 01 00 00 ff 00res 51/54:03:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error) [ 88.071597] ata2.00: status: { DRDY ERR } [ 88.071633] ata2: hard resetting link [ 88.543233] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 88.543240] ata2.00: link online but device misclassified [ 93.779464] ata2.00: qc timeout (cmd 0xa1) [ 93.779474] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 93.779477] ata2.00: revalidation failed (errno=-5) [ 93.779536] ata2: hard resetting link [ 94.251460] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 94.256050] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x100) [ 94.256055] ata2.00: revalidation failed (errno=-5) [ 94.256113] ata2.00: limiting speed to PIO0 [ 99.411701] ata2: hard resetting link [ 99.883662] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 99.890899] ata2.00: configured for PIO0 [ 99.890941] ata2.00: TEST_UNIT_READY failed (err_mask=0x100) [ 99.890943] ata2.00: disabled [ 99.890962] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x6 frozen t4 [ 99.891033] ata2: irq_stat 0x08000000, interface fatal error [ 99.891082] ata2: hard resetting link [ 100.363706] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 100.363754] ata2: EH complete [ 101.288613] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 101.581270] random: crng init done [ 101.581275] random: 7 urandom warning(s) missed due to ratelimiting [ 103.510093] ip_tables: (C) 2000-2006 Netfilter Core Team [ 103.603703] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 103.604085] systemd[1]: Detected architecture x86-64. [ 103.614135] systemd[1]: Set hostname to . [ 104.596978] systemd[1]: Listening on Syslog Socket. [ 104.597140] systemd[1]: Listening on Journal Socket (/dev/log). [ 104.597436] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 104.597510] systemd[1]: Listening on udev Control Socket. [ 104.597539] systemd[1]: Reached target Remote File Systems. [ 104.597814] systemd[1]: Created slice System Slice. [ 104.598038] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 105.340965] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 105.453901] systemd-journald[238]: Received request to flush runtime journal from PID 1 [ 105.766169] lp: driver loaded but no devices found [ 105.768349] ppdev: user-space parallel port driver [ 105.858204] nct6775: Found NCT6776D/F or compatible chip at 0x2e:0x290 [ 106.471548] acpi_cpufreq: overriding BIOS provided _PSD data [ 106.632314] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 107.140561] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 107.140718] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 107.140876] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 107.150002] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 107.150135] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x780b, Revision ID: 0x3a [ 107.150142] sp5100_tco: I/O address 0x0cd6 already in use [ 107.512494] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 108.222636] snd_hda_intel 0000:00:01.1: Force to non-snoop mode [ 108.241556] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input8 [ 108.241672] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9 [ 108.499284] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line [ 108.499294] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 108.499301] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) [ 108.499306] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0 [ 108.499311] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0 [ 108.499315] snd_hda_codec_realtek hdaudioC1D0: inputs: [ 108.499322] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19 [ 108.499328] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18 [ 108.499334] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a [ 108.523659] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10 [ 108.523776] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input11 [ 108.523900] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12 [ 108.524014] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input13 [ 108.524114] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input14 [ 108.659332] ath: EEPROM regdomain: 0x65 [ 108.659335] ath: EEPROM indicates we should expect a direct regpair map [ 108.659338] ath: Country alpha2 being used: 00 [ 108.659339] ath: Regpair used: 0x65 [ 108.700644] kvm: Nested Virtualization enabled [ 108.700654] kvm: Nested Paging enabled [ 108.864279] EDAC MC: Ver: 3.0.0 [ 108.883777] MCE: In-kernel MCE decoding enabled. [ 108.901661] EDAC amd64: DRAM ECC disabled. [ 108.901678] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 108.943340] EDAC amd64: DRAM ECC disabled. [ 108.943358] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. Either enable ECC checking or force module loading by setting 'ecc_enable_override'. (Note that use of the override may cause unknown side effects.) [ 108.943361] media: Linux media interface: v0.10 [ 108.956082] Bluetooth: Core ver 2.22 [ 108.956117] NET: Registered protocol family 31 [ 108.956118] Bluetooth: HCI device and connection manager initialized [ 108.956125] Bluetooth: HCI socket layer initialized [ 108.956130] Bluetooth: L2CAP socket layer initialized [ 108.956151] Bluetooth: SCO socket layer initialized [ 109.088121] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 109.088837] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffb063c3400000, irq=48 [ 109.225759] Linux video capture interface: v2.00 [ 109.392525] Adding 7913468k swap on /dev/sdb1. Priority:-1 extents:1 across:7913468k FS [ 109.457077] usb 5-4: set volume quirk for QuickCam E3500 [ 109.457776] usbcore: registered new interface driver snd-usb-audio [ 109.499423] usbcore: registered new interface driver btusb [ 109.730890] usb 8-1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2) [ 109.731062] usb 8-1: Direct firmware load for ar3k/AthrBT_0x01020200.dfu failed with error -2 [ 109.731074] Bluetooth: Loading patch file failed [ 109.731193] ath3k: probe of 8-1:1.0 failed with error -2 [ 109.731335] usbcore: registered new interface driver ath3k [ 109.833057] uvcvideo: Found UVC 1.00 device (046d:09a4) [ 109.849832] uvcvideo 5-4:1.0: Entity type for entity Extension 4 was not initialized! [ 109.849840] uvcvideo 5-4:1.0: Entity type for entity Extension 10 was not initialized! [ 109.849845] uvcvideo 5-4:1.0: Entity type for entity Extension 12 was not initialized! [ 109.849849] uvcvideo 5-4:1.0: Entity type for entity Extension 8 was not initialized! [ 109.849854] uvcvideo 5-4:1.0: Entity type for entity Extension 11 was not initialized! [ 109.849859] uvcvideo 5-4:1.0: Entity type for entity Processing 2 was not initialized! [ 109.849863] uvcvideo 5-4:1.0: Entity type for entity Extension 13 was not initialized! [ 109.849868] uvcvideo 5-4:1.0: Entity type for entity Camera 1 was not initialized! [ 109.850120] input: UVC Camera (046d:09a4) as /devices/pci0000:00/0000:00:12.2/usb5/5-4/5-4:1.0/input/input15 [ 109.850397] usbcore: registered new interface driver uvcvideo [ 109.850400] USB Video Class driver (1.1.1) [ 110.378570] EXT4-fs (sdb4): mounted filesystem with ordered data mode. Opts: (null) [ 110.579141] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0 [ 111.582779] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) [ 112.449614] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 120.717753] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 120.806372] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw [ 120.878442] r8169 0000:02:00.0 enp2s0: link down [ 120.878560] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready [ 120.922447] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 120.936849] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 120.961723] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 122.166749] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 123.135855] IPv6: ADDRCONF(NETDEV_UP): wlp4s0: link is not ready [ 123.207165] wlp4s0: authenticate with 8c:59:73:8f:73:90 [ 123.221394] wlp4s0: send auth to 8c:59:73:8f:73:90 (try 1/3) [ 123.223320] wlp4s0: authenticated [ 123.224428] wlp4s0: associate with 8c:59:73:8f:73:90 (try 1/3) [ 123.230287] wlp4s0: RX AssocResp from 8c:59:73:8f:73:90 (capab=0xc11 status=0 aid=2) [ 123.230424] wlp4s0: associated [ 123.245024] ath: EEPROM regdomain: 0x80cb [ 123.245027] ath: EEPROM indicates we should expect a country code [ 123.245028] ath: doing EEPROM country->regdmn map search [ 123.245029] ath: country maps to regdmn code: 0x36 [ 123.245031] ath: Country alpha2 being used: CZ [ 123.245031] ath: Regpair used: 0x36 [ 123.245033] ath: regdomain 0x80cb dynamically updated by country IE [ 123.639620] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready [ 126.654555] tun: Universal TUN/TAP device driver, 1.6 [ 126.654560] tun: (C) 1999-2004 Max Krasnyansky [ 126.717450] vboxdrv: loading out-of-tree module taints kernel. [ 126.742770] vboxdrv: Found 4 processor cores [ 126.761290] vboxdrv: TSC mode is Invariant, tentative frequency 2049982136 Hz [ 126.761294] vboxdrv: Successfully loaded version 5.2.24_Debian (interface 0x00290001) [ 127.307844] VBoxNetFlt: Successfully started. [ 127.459894] VBoxNetAdp: Successfully started. [ 127.486774] VBoxPciLinuxInit [ 127.551942] vboxpci: IOMMU not found (not registered) [ 134.718649] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 162.723278] usb 5-4: reset high-speed USB device number 2 using ehci-pci [ 183.079758] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 183.079761] Bluetooth: BNEP filters: protocol multicast [ 183.079769] Bluetooth: BNEP socket layer initialized