Linux version 2.6.31.5-desktop-1mnb (herton@n2.mandriva.com) (gcc version 4.4.1 (GCC) ) #1 SMP Fri Oct 23 01:46:54 EDT 2009 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d800 (usable) BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003f6d0000 (usable) BIOS-e820: 000000003f6d0000 - 000000003f6dd000 (ACPI data) BIOS-e820: 000000003f6dd000 - 000000003f700000 (ACPI NVS) BIOS-e820: 000000003f700000 - 0000000040000000 (reserved) BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x3f6d0 max_arch_pfn = 0x100000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-CFFFF write-protect D0000-DFFFF uncachable E0000-FFFFF write-protect MTRR variable ranges enabled: 0 base 000000000 mask FC0000000 write-back 1 base 03F700000 mask FFFF00000 uncachable 2 base 03F800000 mask FFF800000 uncachable 3 disabled 4 disabled 5 disabled 6 disabled 7 disabled x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 initial memory mapped : 0 - 00c00000 init_memory_mapping: 0000000000000000-00000000373fe000 0000000000 - 0000400000 page 4k 0000400000 - 0037000000 page 2M 0037000000 - 00373fe000 page 4k kernel direct mapping tables up to 373fe000 @ 7000-d000 RAMDISK: 37a14000 - 37fef3fd Allocated new RAMDISK: 00703000 - 00cde3fd Move RAMDISK from 0000000037a14000 - 0000000037fef3fc to 00703000 - 00cde3fc ACPI: RSDP 000f6aa0 00024 (v02 LENOVO) ACPI: XSDT 3f6d1f53 00084 (v01 LENOVO TP-7P 00002220 LTP 00000000) ACPI: FACP 3f6d2000 000F4 (v03 LENOVO TP-7P 00002220 LNVO 00000001) ACPI Warning: 32/64X length mismatch in Gpe1Block: 0/32 20090521 tbfadt-527 ACPI Warning: Optional field Gpe1Block has zero address or length: 000000000000102C/0 20090521 tbfadt-558 ACPI: DSDT 3f6d241d 0A7B1 (v01 LENOVO TP-7P 00002220 MSFT 03000000) ACPI: FACS 3f6e4000 00040 ACPI: SSDT 3f6d21b4 00269 (v01 LENOVO TP-7P 00002220 MSFT 03000000) ACPI: ECDT 3f6dcbce 00052 (v01 LENOVO TP-7P 00002220 LNVO 00000001) ACPI: APIC 3f6dcc20 00068 (v01 LENOVO TP-7P 00002220 LNVO 00000001) ACPI: MCFG 3f6dcc88 0003C (v01 LENOVO TP-7P 00002220 LNVO 00000001) ACPI: HPET 3f6dccc4 00038 (v01 LENOVO TP-7P 00002220 LNVO 00000001) ACPI: SLIC 3f6dce62 00176 (v01 LENOVO TP-7P 00002220 LTP 00000000) ACPI: BOOT 3f6dcfd8 00028 (v01 LENOVO TP-7P 00002220 LTP 00000001) ACPI: SSDT 3f6e234d 0025F (v01 LENOVO TP-7P 00002220 INTL 20050513) ACPI: SSDT 3f6e25ac 000A6 (v01 LENOVO TP-7P 00002220 INTL 20050513) ACPI: SSDT 3f6e2652 004F7 (v01 LENOVO TP-7P 00002220 INTL 20050513) ACPI: SSDT 3f6e2b49 001D8 (v01 LENOVO TP-7P 00002220 INTL 20050513) ACPI: DMI detected: Lenovo ThinkPad R61 ACPI: Added _OSI(Linux) ACPI: Local APIC address 0xfee00000 130MB HIGHMEM available. 883MB LOWMEM available. mapped low ram: 0 - 373fe000 low ram: 0 - 373fe000 node 0 low ram: 00000000 - 373fe000 node 0 bootmap 00009000 - 0000fe80 (9 early reservations) ==> bootmem [0000000000 - 00373fe000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000100000 - 00006feec4] TEXT DATA BSS ==> [0000100000 - 00006feec4] #4 [000009d800 - 0000100000] BIOS reserved ==> [000009d800 - 0000100000] #5 [00006ff000 - 000070213c] BRK ==> [00006ff000 - 000070213c] #6 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] #7 [0000703000 - 0000cde3fd] NEW RAMDISK ==> [0000703000 - 0000cde3fd] #8 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] found SMP MP-table at [c00f6ad0] f6ad0 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x000373fe HighMem 0x000373fe -> 0x0003f6d0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009d 0: 0x00000100 -> 0x0003f6d0 On node 0 totalpages: 259693 free_area_init_node: node 0, pgdat c05cdee0, node_mem_map c1000000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3965 pages, LIFO batch:0 Normal zone: 1736 pages used for memmap Normal zone: 220470 pages, LIFO batch:31 HighMem zone: 262 pages used for memmap HighMem zone: 33228 pages, LIFO batch:7 Using APIC driver default ACPI: PM-Timer IO Port: 0x1008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 SMP: Allowing 2 CPUs, 0 hotplug CPUs nr_irqs_gsi: 24 PM: Registered nosave memory: 000000000009d000 - 000000000009e000 PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Allocating PCI resources starting at 40000000 (gap: 40000000:b0000000) NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 PERCPU: Embedded 14 pages at c17f5000, static data 35132 bytes Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257663 Kernel command line: BOOT_IMAGE=linux root=UUID=e5875168-1243-4034-9213-eee8de13494e resume=UUID=19bdc031-24ac-497a-b080-98292f3b67b2 splash=silent vga=788 PID hash table entries: 4096 (order: 12, 16384 bytes) Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 Initializing HighMem for node 0 (000373fe:0003f6d0) Memory: 1017220k/1039168k available (3086k kernel code, 21240k reserved, 1883k data, 436k init, 133960k highmem) virtual kernel memory layout: fixmap : 0xffd55000 - 0xfffff000 (2728 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) .init : 0xc05db000 - 0xc0648000 ( 436 kB) .data : 0xc0403a96 - 0xc05da888 (1883 kB) .text : 0xc0100000 - 0xc0403a96 (3086 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 NR_IRQS:1280 Extended CMOS year: 2000 Fast TSC calibration using PIT Detected 1496.277 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered HPET: 3 timers in total, 0 timers will be used for per-cpu timer Calibrating delay loop (skipped), value calculated using timer frequency.. 2992.55 BogoMIPS (lpj=1496277) Security Framework initialized TOMOYO Linux initialized Mount-cache hash table entries: 512 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 6 MCE banks CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. Performance Counters: Core2 events, Intel PMU driver. ... version: 2 ... bit width: 40 ... generic counters: 2 ... value mask: 000000ffffffffff ... max period: 000000007fffffff ... fixed-purpose counters: 3 ... counter mask: 0000000700000003 Checking 'hlt' instruction... OK. ACPI: Checking initramfs for custom DSDT ACPI: Core revision 20090521 ftrace: converting mcount calls to 0f 1f 44 00 00 ftrace: allocating 14182 entries in 28 pages ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d Booting processor 1 APIC 0x1 ip 0x6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 2992.39 BogoMIPS (lpj=1496197) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 mce: CPU supports 6 MCE banks CPU1: Thermal monitoring enabled (TM2) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz stepping 0d checking TSC synchronization [CPU#0 -> CPU#1]: Measured 344583 cycles TSC warp between CPUs, turning off TSC clock. Marking TSC unstable due to check_tsc_sync_source failed Brought up 2 CPUs Total of 2 processors activated (5984.94 BogoMIPS). CPU0 attaching sched-domain: domain 0: span 0-1 level MC groups: 0 1 CPU1 attaching sched-domain: domain 0: span 0-1 level MC groups: 1 0 devtmpfs: initialized Booting paravirtualized kernel on bare hardware Time: 15:26:18 Date: 01/10/10 NET: Registered protocol family 16 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63 PCI: MCFG area at f0000000 reserved in E820 PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 for base access bio: create slab at 0 ACPI: EC: EC description table is found, configuring boot EC ACPI: BIOS _OSI(Linux) query honored via DMI ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: EC: GPE = 0x12, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: Power Resource [PUBS] (on) ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:02.0: reg 10 64bit mmio: [0xf8100000-0xf81fffff] pci 0000:00:02.0: reg 18 64bit mmio: [0xe0000000-0xefffffff] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807] pci 0000:00:02.1: reg 10 64bit mmio: [0xf8200000-0xf82fffff] pci 0000:00:1a.0: reg 20 io port: [0x1820-0x183f] pci 0000:00:1a.1: reg 20 io port: [0x1840-0x185f] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfe304800-0xfe304bff] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold pci 0000:00:1a.7: PME# disabled pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe100000-0xfe103fff] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold pci 0000:00:1c.2: PME# disabled pci 0000:00:1d.0: reg 20 io port: [0x1860-0x187f] pci 0000:00:1d.1: reg 20 io port: [0x1880-0x189f] pci 0000:00:1d.2: reg 20 io port: [0x18a0-0x18bf] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe304c00-0xfe304fff] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold pci 0000:00:1d.7: PME# disabled pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 1600 (mask 007f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 15e0 (mask 000f) pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 1680 (mask 001f) pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f] pci 0000:00:1f.2: reg 10 io port: [0x1c00-0x1c07] pci 0000:00:1f.2: reg 14 io port: [0x18d4-0x18d7] pci 0000:00:1f.2: reg 18 io port: [0x18d8-0x18df] pci 0000:00:1f.2: reg 1c io port: [0x18d0-0x18d3] pci 0000:00:1f.2: reg 20 io port: [0x18e0-0x18ff] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe304000-0xfe3047ff] pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: reg 10 32bit mmio: [0xfe305000-0xfe3050ff] pci 0000:00:1f.3: reg 20 io port: [0x1c20-0x1c3f] pci 0000:00:1c.0: bridge io port: [0x2000-0x2fff] pci 0000:00:1c.0: bridge 32bit mmio: [0xfc000000-0xfdffffff] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8000000-0xf80fffff] pci 0000:03:00.0: reg 10 32bit mmio: [0xdfcff000-0xdfcfffff] pci 0000:03:00.0: PME# supported from D0 D3hot pci 0000:03:00.0: PME# disabled pci 0000:00:1c.1: bridge io port: [0x3000-0x3fff] pci 0000:00:1c.1: bridge 32bit mmio: [0xdc100000-0xdfcfffff] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xdfe00000-0xdfefffff] pci 0000:04:00.0: reg 10 64bit mmio: [0xfe000000-0xfe00ffff] pci 0000:04:00.0: PME# supported from D3hot D3cold pci 0000:04:00.0: PME# disabled pci 0000:00:1c.2: bridge 32bit mmio: [0xfe000000-0xfe0fffff] pci 0000:15:00.0: reg 10 32bit mmio: [0xf8300000-0xf8300fff] pci 0000:15:00.0: supports D1 D2 pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:15:00.0: PME# disabled pci 0000:00:1e.0: transparent bridge pci 0000:00:1e.0: bridge io port: [0x4000-0x7fff] pci 0000:00:1e.0: bridge 32bit mmio: [0xf8300000-0xfbffffff] pci 0000:00:1e.0: bridge 64bit mmio pref: [0xf4000000-0xf7ffffff] pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 comparators, 64-bit 14.318180 MHz counter Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered PnPBIOS: Disabled system 00:00: iomem range 0x0-0x9ffff could not be reserved system 00:00: iomem range 0xc0000-0xc3fff could not be reserved system 00:00: iomem range 0xc4000-0xc7fff could not be reserved system 00:00: iomem range 0xc8000-0xcbfff has been reserved system 00:00: iomem range 0xcc000-0xcffff has been reserved system 00:00: iomem range 0xd0000-0xd3fff could not be reserved system 00:00: iomem range 0xe0000-0xe3fff could not be reserved system 00:00: iomem range 0xe4000-0xe7fff could not be reserved system 00:00: iomem range 0xe8000-0xebfff could not be reserved system 00:00: iomem range 0xec000-0xeffff could not be reserved system 00:00: iomem range 0xf0000-0xfffff could not be reserved system 00:00: iomem range 0x100000-0x3fffffff could not be reserved system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved system 00:02: ioport range 0x164e-0x164f has been reserved system 00:02: ioport range 0x1000-0x107f has been reserved system 00:02: ioport range 0x1180-0x11bf has been reserved system 00:02: ioport range 0x800-0x80f has been reserved system 00:02: ioport range 0x15e0-0x15ef has been reserved system 00:02: ioport range 0x1600-0x165f could not be reserved system 00:02: iomem range 0xf0000000-0xf3ffffff has been reserved system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved system 00:02: iomem range 0xfed14000-0xfed17fff has been reserved system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 pci 0000:00:1c.0: IO window: 0x2000-0x2fff pci 0000:00:1c.0: MEM window: 0xfc000000-0xfdffffff pci 0000:00:1c.0: PREFETCH window: 0x000000f8000000-0x000000f80fffff pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 pci 0000:00:1c.1: IO window: 0x3000-0x3fff pci 0000:00:1c.1: MEM window: 0xdc100000-0xdfcfffff pci 0000:00:1c.1: PREFETCH window: 0x000000dfe00000-0x000000dfefffff pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04 pci 0000:00:1c.2: IO window: disabled pci 0000:00:1c.2: MEM window: 0xfe000000-0xfe0fffff pci 0000:00:1c.2: PREFETCH window: disabled pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16 pci 0000:15:00.0: IO window: 0x004000-0x0040ff pci 0000:15:00.0: IO window: 0x004400-0x0044ff pci 0000:15:00.0: PREFETCH window: 0xf4000000-0xf7ffffff pci 0000:15:00.0: MEM window: 0x40000000-0x43ffffff pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15 pci 0000:00:1e.0: IO window: 0x4000-0x7fff pci 0000:00:1e.0: MEM window: 0xf8300000-0xfbffffff pci 0000:00:1e.0: PREFETCH window: 0x000000f4000000-0x000000f7ffffff pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1c.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22 pci 0000:00:1c.2: setting latency timer to 64 pci 0000:00:1e.0: enabling device (0005 -> 0007) pci 0000:00:1e.0: setting latency timer to 64 pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci_bus 0000:00: resource 0 io: [0x00-0xffff] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff] pci_bus 0000:02: resource 1 mem: [0xfc000000-0xfdffffff] pci_bus 0000:02: resource 2 pref mem [0xf8000000-0xf80fffff] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] pci_bus 0000:03: resource 1 mem: [0xdc100000-0xdfcfffff] pci_bus 0000:03: resource 2 pref mem [0xdfe00000-0xdfefffff] pci_bus 0000:04: resource 1 mem: [0xfe000000-0xfe0fffff] pci_bus 0000:15: resource 0 io: [0x4000-0x7fff] pci_bus 0000:15: resource 1 mem: [0xf8300000-0xfbffffff] pci_bus 0000:15: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:15: resource 3 io: [0x00-0xffff] pci_bus 0000:15: resource 4 mem: [0x000000-0xffffffff] pci_bus 0000:16: resource 0 io: [0x4000-0x40ff] pci_bus 0000:16: resource 1 io: [0x4400-0x44ff] pci_bus 0000:16: resource 2 pref mem [0xf4000000-0xf7ffffff] pci_bus 0000:16: resource 3 mem: [0x40000000-0x43ffffff] NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 Trying to unpack rootfs image as initramfs... Freeing initrd memory: 5996k freed Simple Boot Flag at 0x35 set to 0x1 apm: BIOS not found. audit: initializing netlink socket (disabled) type=2000 audit(1263137177.724:1): initialized highmem bounce pool size: 64 pages HugeTLB registered 4 MB page size, pre-allocated 0 pages VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) msgmni has been set to 1737 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:00:02.0: Boot video device pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X pcieport-driver 0000:00:1c.0: setting latency timer to 64 pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X pcieport-driver 0000:00:1c.1: setting latency timer to 64 pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X pcieport-driver 0000:00:1c.2: setting latency timer to 64 vesafb: framebuffer at 0xe0000000, mapped to 0xf7c80000, using 1875k, total 7616k vesafb: mode is 800x600x16, linelength=1600, pages=6 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel 965GM Chipset agpgart-intel 0000:00:00.0: detected 7676K stolen memory agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000 Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled brd: module loaded PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs cpuidle: using governor ladder cpuidle: using governor menu input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 TCP cubic registered Using IPI No-Shortcut mode PM: Checking image partition UUID=19bdc031-24ac-497a-b080-98292f3b67b2 psmouse serio1: ID: 10 00 64 IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input1 PM: Resume from disk failed. registered taskstats version 1 Magic number: 10:683:436 rtc_cmos 00:07: setting system clock to 2010-01-10 15:26:20 UTC (1263137180) BIOS EDD facility v0.16 2004-Jun-25, 1 devices found Freeing unused kernel memory: 436k freed [drm] Initialized drm 1.1.0 20060810 i915 0000:00:02.0: power state changed by ACPI to D0 i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 i915 0000:00:02.0: setting latency timer to 64 i915 0000:00:02.0: irq 27 for MSI/MSI-X fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver Console: switching to colour dummy device 80x25 Console: switching to colour frame buffer device 160x50 [drm] LVDS-8: set mode 1280x800 c [drm] fb0: inteldrmfb frame buffer device acpi device:03: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/input/input2 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 SCSI subsystem initialized libata version 3.00 loaded. ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 ahci 0000:00:1f.2: irq 28 for MSI/MSI-X ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 1.5 Gbps 0x5 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ahci 0000:00:1f.2: setting latency timer to 64 scsi0 : ahci scsi1 : ahci scsi2 : ahci ata1: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304100 irq 28 ata2: DUMMY ata3: SATA max UDMA/133 abar m2048@0xfe304000 port 0xfe304200 irq 28 ata3: SATA link down (SStatus 0 SControl 300) ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: ATA-7: HITACHI HTS541612J9SA00, SBDIC7UP, max UDMA/100 ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32) ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out ata1.00: configured for UDMA/100 ata1.00: configured for UDMA/100 ata1: EH complete scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54161 SBDI PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 < sda5 sda6 > sd 0:0:0:0: [sda] Attached SCSI disk ata_piix 0000:00:1f.1: version 2.13 ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16 ata_piix 0000:00:1f.1: setting latency timer to 64 scsi3 : ata_piix scsi4 : ata_piix ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14 ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15 ata5: port disabled. ignoring. ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WX05, max UDMA/33 ata4.00: configured for UDMA/33 scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20N WX05 PQ: 0 ANSI: 5 PM: Marking nosave pages: 000000000009d000 - 0000000000100000 PM: Basic memory bitmaps created PM: Basic memory bitmaps freed EXT4-fs (sda6): barriers enabled kjournald2 starting: pid 68, dev sda6:8, commit interval 5 seconds EXT4-fs (sda6): delayed allocation enabled EXT4-fs: file extents enabled EXT4-fs: mballoc enabled EXT4-fs (sda6): mounted filesystem with ordered data mode Tomoyo security MAC extension available but disabled by default. If you want to enable and use it, ccs-tools package must be installed. udev: starting version 146 ACPI: AC Adapter [AC] (on-line) input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 ACPI: Lid Switch [LID] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 ACPI: Sleep Button [SLPB] ACPI: SSDT 3f6e1aef 0085E (v01 PmRef Cpu0Cst 00000100 INTL 20050513) Monitor-Mwait will be used to enter C-1 state Monitor-Mwait will be used to enter C-2 state ACPI: CPU0 (power states: C1[C1] C2[C2]) processor LNXCPU:00: registered as cooling_device1 ACPI: Processor [CPU0] (supports 8 throttling states) ACPI: SSDT 3f6e1a6a 00085 (v01 PmRef Cpu1Cst 00000100 INTL 20050513) ACPI: CPU1 (power states: C1[C1] C2[C2]) processor LNXCPU:01: registered as cooling_device2 ACPI: Processor [CPU1] (supports 8 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THM0] (37 C) thermal LNXTHERM:02: registered as thermal_zone1 ACPI: Thermal Zone [THM1] (38 C) Non-volatile memory driver v1.3 ACPI: Battery Slot [BAT0] (battery present) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver uhci_hcd: USB Universal Host Controller Interface driver ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22 ehci_hcd 0000:00:1a.7: setting latency timer to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfe304800 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd usb usb1: SerialNumber: 0000:00:1a.7 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 4 ports detected uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:1a.0: setting latency timer to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001820 usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd usb usb2: SerialNumber: 0000:00:1a.0 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0 ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:1d.7: setting latency timer to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 ehci_hcd 0000:00:1d.7: debug port 1 ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfe304c00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: EHCI Host Controller usb usb3: Manufacturer: Linux 2.6.31.5-desktop-1mnb ehci_hcd usb usb3: SerialNumber: 0000:00:1d.7 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0 uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:1a.1: setting latency timer to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840 usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd usb usb4: SerialNumber: 0000:00:1a.1 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 uhci_hcd 0000:00:1d.0: setting latency timer to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001860 usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd usb usb5: SerialNumber: 0000:00:1d.0 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 uhci_hcd 0000:00:1d.1: setting latency timer to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001880 usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd usb usb6: SerialNumber: 0000:00:1d.1 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: power state changed by ACPI to D0 uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 uhci_hcd 0000:00:1d.2: setting latency timer to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0 usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb7: Product: UHCI Host Controller usb usb7: Manufacturer: Linux 2.6.31.5-desktop-1mnb uhci_hcd usb usb7: SerialNumber: 0000:00:1d.2 usb usb7: configuration #1 chosen from 1 choice hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected thinkpad_acpi: ThinkPad ACPI Extras v0.23 thinkpad_acpi: http://ibm-acpi.sf.net/ thinkpad_acpi: ThinkPad BIOS 7PETC2WW (2.22 ), EC 7KHT24WW-1.08 thinkpad_acpi: Lenovo ThinkPad R61e/R61i, model 76508TG thinkpad_acpi: ACPI backlight control delay disabled thinkpad_acpi: radio switch found; radios are enabled thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver thinkpad_acpi: Disabling thinkpad-acpi brightness events by default... Registered led device: tpacpi::thinklight Registered led device: tpacpi::power Registered led device: tpacpi::standby Registered led device: tpacpi::thinkvantage thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. input: ThinkPad Extra Buttons as /devices/virtual/input/input6 usb 2-1: new full speed USB device using uhci_hcd and address 2 usb 2-1: New USB device found, idVendor=0a5c, idProduct=2110 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1: Product: BCM2045B usb 2-1: Manufacturer: Broadcom Corp usb 2-1: configuration #1 chosen from 1 choice Bluetooth: Core ver 2.15 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: Generic Bluetooth USB driver ver 0.5 usbcore: registered new interface driver btusb hdaps: inverting axis (3) readings. hdaps: LENOVO ThinkPad R61 detected. input: hdaps as /devices/platform/hdaps/input/input7 hdaps: driver successfully loaded. usb 5-2: new low speed USB device using uhci_hcd and address 2 usb 5-2: New USB device found, idVendor=045e, idProduct=00e1 usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 5-2: Product: Microsoft Notebook Receiver v2.0 usb 5-2: Manufacturer: Microsoft usb 5-2: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Microsoft Microsoft Notebook Receiver v2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input8 generic-usb 0003:045E:00E1.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Notebook Receiver v2.0] on usb-0000:00:1d.0-2/input0 usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c4] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16 yenta_cardbus 0000:15:00.0: Socket status: 30000006 yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x7fff: clean. yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf8300000 - 0xfbffffff yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff EXT4-fs (sda6): internal journal on sda6:8 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. fuse init (API version 7.12) Adding 1043240k swap on /dev/sda5. Priority:-1 extents:1 across:1043240k