smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD3200BEVT-60ZCT1 Serial Number: WD-WXE908T40637 Firmware Version: 13.01A13 User Capacity: 320 072 933 376 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Sat Oct 24 00:10:58 2009 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (9960) seconds. Offline data collection capabilities: (0x51) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 118) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 188 187 021 Pre-fail Always - 1583 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 278 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1108 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 276 187 Reported_Uncorrect 0x0032 076 046 000 Old_age Always - 78 188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 057 045 040 Old_age Always - 43 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 13 193 Load_Cycle_Count 0x0032 184 184 000 Old_age Always - 48219 194 Temperature_Celsius 0x0022 104 092 000 Old_age Always - 43 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 1 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 SMART Error Log Version: 1 ATA Error Count: 78 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 78 occurred at disk power-on lifetime: 1106 hours (46 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 02 7f 45 e9 e0 Error: AMNF 2 sectors at LBA = 0x00e9457f = 15287679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 02 7f 45 e9 16 08 10:53:55.795 READ DMA EXT ec 00 00 00 00 00 00 08 10:53:55.791 IDENTIFY DEVICE ef 03 44 00 00 00 00 08 10:53:55.791 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 08 10:53:55.788 IDENTIFY DEVICE 25 00 02 7f 45 e9 16 08 10:53:52.890 READ DMA EXT Error 77 occurred at disk power-on lifetime: 1106 hours (46 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 02 7f 45 e9 e0 Error: AMNF 2 sectors at LBA = 0x00e9457f = 15287679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 02 7f 45 e9 16 08 10:53:52.890 READ DMA EXT ec 00 00 00 00 00 00 08 10:53:52.886 IDENTIFY DEVICE ef 03 44 00 00 00 00 08 10:53:52.886 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 08 10:53:52.883 IDENTIFY DEVICE 25 00 02 7f 45 e9 16 08 10:53:49.985 READ DMA EXT Error 76 occurred at disk power-on lifetime: 1106 hours (46 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 02 7f 45 e9 e0 Error: AMNF 2 sectors at LBA = 0x00e9457f = 15287679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 02 7f 45 e9 16 08 10:53:49.985 READ DMA EXT ec 00 00 00 00 00 00 08 10:53:49.981 IDENTIFY DEVICE ef 03 44 00 00 00 00 08 10:53:49.981 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 08 10:53:49.978 IDENTIFY DEVICE 25 00 02 7f 45 e9 16 08 10:53:47.081 READ DMA EXT Error 75 occurred at disk power-on lifetime: 1106 hours (46 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 02 7f 45 e9 e0 Error: AMNF 2 sectors at LBA = 0x00e9457f = 15287679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 02 7f 45 e9 16 08 10:53:47.081 READ DMA EXT ec 00 00 00 00 00 00 08 10:53:47.077 IDENTIFY DEVICE ef 03 44 00 00 00 00 08 10:53:47.077 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 08 10:53:47.074 IDENTIFY DEVICE 25 00 02 7f 45 e9 16 08 10:53:44.142 READ DMA EXT Error 74 occurred at disk power-on lifetime: 1106 hours (46 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 01 51 02 7f 45 e9 e0 Error: AMNF 2 sectors at LBA = 0x00e9457f = 15287679 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 02 7f 45 e9 16 08 10:53:44.142 READ DMA EXT ec 00 00 00 00 00 00 08 10:53:44.140 IDENTIFY DEVICE ef 03 44 00 00 00 00 08 10:53:44.140 SET FEATURES [Set transfer mode] ec 00 00 00 00 00 00 08 10:53:44.138 IDENTIFY DEVICE 25 00 02 7f 45 e9 16 08 10:53:40.760 READ DMA EXT SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.