DreamBox 7000S

Podpora:	kompletní
Ovladač:	dodává někdo jiný

Technické parametry

Jednočipový počítač IBM STB 04500

• PowerPC 405 252MHz (IBM Redwood5)
• 32 MB RAM
• 1x IDE ATA-5
• 1x USB v1.1
• 1x RS 232 (console)
• 1x ethernet
• 2x smart card readers
• 1x CF card reader/writer
• 2x SCART
• 1x optical SPID

Identifikace pod Linuxem

dmesg:
Linux version 2.4.19-rc3 (tmbinc@stb4500) (gcc version 3.2) #106 Mon Oct 14 15:31:39 CEST 2002
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=none root=/dev/mtdblock/0
Console: colour dummy device 80x25
Calibrating delay loop... 251.49 BogoMIPS
Memory: 29896k available (1856k kernel code, 536k data, 84k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
OCP uart ver 1.5 init complete
Starting kswapd
devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB.
i2c-core.o: i2c core module
i2c-dev.o: i2c /dev entries driver module
i2c-core.o: driver i2c-dev dummy driver registered.
i2c-proc.o version 2.6.1 (20010825)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
ttyS00 at 0xe0040000 (irq = 20) is a 16550A
ttyS01 at 0xe0000000 (irq = 21) is a 16550A
ttyS02 at 0xe00e0000 (irq = 31) is a 16550A
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
IBM IDE ocp driver version 2.2
ide_stb04xxx: waiting for drive ready......Drive spun up 
hda: WDC WD800AB-00CBA1, ATA DISK drive
Unhandled interrupt 19, disabled
ide0 at 0xc307d1f8-0xc307d1ff,0xc307d1f6 on irq 25
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=155061/16/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: p1
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
smc91111.c:v1.0saa 08/22/01 by Daris A Nevil (dnevil@snmc.com)
eth0: SMC91C11xFD(r:1) at 0xc3083300 IRQ:28
 INTF:<NULL> MEM:8192b NOWAIT:0  ADDR 00:09:34:00:15:b7 
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
Linux video capture interface: v1.00
dreambox: flash mapping: 800000 at 7f800000
0: offset=0x0,size=0x20000,blocks=64
Using buffer write method
Creating 5 MTD partitions on "DreamBOX rev3+":
0x00000000-0x00600000 : "DreamBOX cramfs"
0x00600000-0x007c0000 : "DreamBOX jffs2"
0x007c0000-0x00800000 : "DreamBOX OpenBIOS"
0x00000000-0x007c0000 : "DreamBOX (w/o bootloader)"
0x00000000-0x00800000 : "DreamBOX (w/ bootloader)"
IBM On-chip iic (i2c) algorithm module 2002.30.04
iic_ibmocp_init: IBM on-chip iic adapter module
i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 0
i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 0.
i2c-dev.o: Registered 'IBM OCP IIC adapter' as minor 1
i2c-core.o: adapter IBM OCP IIC adapter registered as adapter 1.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
NET4: Ethernet Bridge 008 for NET4.0
VFS: Mounted root (cramfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k init
Warning: unable to open an initial console.
fb: loaded
Console: switching to colour frame buffer device 90x36
pfb: fb0: Pallas frame buffer device
i2c-core.o: driver DreamBOX frontprocessor registered.
i2c-core.o: client [fp] registered to adapter [IBM OCP IIC adapter](pos. 0).
fp: attaching fp at 0xee to adapter IBM OCP IIC adapter
error occured: 43
incomplete xfer
nack
event: init ...
CICCR:00800088
core: Loaded IBM STB04xxx core driver
write 1 event's ...
registering device.
demux: inited
xp0_clk_stop
[XP1] Init
[XP1] 896KBytes used for Queues
ist da doch was mit 1394?
i2c-core.o: driver stv0299 DVB demodulator registered.
i2c-core.o: client [stv0299] registered to adapter [IBM OCP IIC adapter](pos. 1).
registering frontend...
already got one.
i2c-core.o: driver Mitel tuner driver registered.
i2c-core.o: client [Dreambox Tuner Driver] registered to adapter [IBM OCP IIC adapter](pos. 2).
lcd.o: LCD driver (KS0713) module
i2c-core.o: driver DreamBOX AV-Switch registered.
i2c-core.o: client [avs] registered to adapter [IBM OCP IIC adapter](pos. 3).
avs: attaching avs at 0x94 to adapter IBM OCP IIC adapter
error occured: 43
incomplete xfer
nack
VFS: Can't find ext2 filesystem on dev ide0(3,1).
cramfs: wrong magic
Unable to identify CD-ROM format.
JFFS: Trying to mount a non-mtd device.
jffs2: attempt to mount non-MTD device 03:01
reiserfs: checking transaction log (device 03:01) ...
Using r5 hash to sort names
ReiserFS version 3.6.25
set event: 00000008
ci-open
continuous Tone is ON
disable continuous tone
delay 25ms
(0)commited command send
do not change continuous Tone State .. ( OFF )
[AVS] cmd:1009 1
FBLK:1
[AVS] cmd:1001 5
set_vsw1:5
[AVS] cmd:1004 1
[AVS] cmd:1002 1
[AVS] cmd:1005 0
[AVS] cmd:1003 1
[AVS] cmd:1006 1
open audio device
[AVS] cmd:1007 a
[AVS] cmd:1009 1
FBLK:1
[AVS] cmd:100a 2
FNC:2
[AVS] cmd:100a 2
FNC:2
eth0:PHY remote fault detected
continuous Tone is OFF
do not disable continuous tone (already off)
(0)commited command send
delay 25ms
set continuous tone ON
open audio device
VIDEO_PLAY / VIDEO_CONTINUE, state 0
VIDEO_FREEZE, state 1
ok, state now: 2
VIDEO_PLAY / VIDEO_CONTINUE, state 2
xp0_clk_start
eth0: no IPv6 routers present

Postup zprovoznění pod Linuxem

Jedná se o set-top-box, tzn. po zapnutí je připraven k použití.

Poznámka

Vetšinu obslužného softu je možné najít na stránkách projektu TUXBOX.

Po nastavení IP adresy přes dálkový ovladač a připojení do sítě je možné se přihlásit přes telnet.

Zařízení je možné interně dovybavit IDE diskem.

Dokument vytvořil: Honza Petrouš, 23.1.2003 07:03 | Poslední úprava: Fluttershy, yay!, 27.2.2011 15:09 | Historie změn | Zobrazeno: 4075×