MSI-6178

Technické parametry

i810 chipset, 4MB video RAM, AC97 zvukova, 3PCI sloty podporuje UDMA66, senzor (teplota, volty) Winbond W83627HF

Identifikace pod Linuxem

/proc/pci
PCI devices found:
Bus 0, device 0, function 0:
Host bridge: Intel Corporation 82810-DC100 GMCH [Graphics Memory Controller Hub] (rev 3).
Bus 0, device 1, function 0:
VGA compatible controller: Intel Corporation 82810-DC100 CGC [Chipset Graphics Controller] (rev 3).
IRQ 10.
Prefetchable 32 bit memory at 0xd0000000 [0xd3ffffff].
Non-prefetchable 32 bit memory at 0xd6000000 [0xd607ffff].
Bus 0, device 30, function 0:
PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 2).
Master Capable. No bursts. Min Gnt=6.
Bus 0, device 31, function 0:
ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 2).
Bus 0, device 31, function 1:
IDE interface: Intel Corporation 82801AA IDE (rev 2).
I/O at 0xf000 [0xf00f].
Bus 0, device 31, function 2:
USB Controller: Intel Corporation 82801AA USB (rev 2).
IRQ 5.
I/O at 0xd000 [0xd01f].
Bus 0, device 31, function 3:
SMBus: Intel Corporation 82801AA SMBus (rev 2).
IRQ 11.
I/O at 0x5000 [0x500f].
Bus 1, device 1, function 0:
Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 36).
IRQ 11.
Master Capable. Latency=32. Min Gnt=10.Max Lat=10.
I/O at 0xc000 [0xc07f].
Non-prefetchable 32 bit memory at 0xd5000000 [0xd500007f].
Bus 1, device 2, function 0:
Multimedia audio controller: Ensoniq CT5880 [AudioPCI] (rev 2).
IRQ 12.
Master Capable. Latency=32. Min Gnt=12.Max Lat=128.
I/O at 0xc400 [0xc43f].

/proc/bus/i2c
i2c-0 i2c I810/I815 I2C Adapter Bit-shift algorithm
i2c-1 i2c I810/I815 DDC Adapter Bit-shift algorithm
i2c-2 smbus SMBus I801 adapter at 5000 Non-I2C SMBus adapter
i2c-3 dummy ISA main adapter ISA bus algorithm

/proc/ide/piix
Intel PIIX4 Ultra 66 Chipset.
--------------- Primary Channel ---------------- Secondary Channel -------------
enabled enabled
--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------
DMA enabled: yes yes yes yes
UDMA enabled: yes yes yes yes
UDMA enabled: 4 4 2 2
UDMA
DMA
PIO

Postup zprovoznění pod Linuxem

RH 7.2 bez problemov
Starsia doska. Nemozem rozchodit Celeron 900, Celeron 566 ide.

Poznámka

Dobry MB na pracovnu stanicu - video idem 1152x864 (1152x900 - Solaris). Spustit /usr/sbin/sensors-detect - detekuje typ senzoru, vypise konfiguraciu, potom prikaz sensors vypise teplotu, napetia (RH7.2). 99% casu ide pod Solaris8, teraz som instaloval aj Linux.

Dokument vytvořil: Zaphod, 10.12.2001 15:22 | Zobrazeno: 775×