Dotaz: hostap

[vetron]

Zdravim, Chcem nastavit po linuxom (RH8.0)wifi kartu, aby pracovala ako ACCESS POINT. typ karty je : Long RAnge NL-2511CD plus etx2 a ovladac, ktory pouzivam je (hostap_cs) verzia zdrojakov hostap-0.0.4 Podarilo sa mi rozchodit ovladac a aj nastavit kartu do modu: master (ESSID som nastavil),ale ked som z ineho pocitaca v ktorom bolo nastavene to iste ESSID, dal hladat AP tak ho nenaslo. Neviete mi poradit v com moze byt problem, pripadne co by trebalo este nastavit.

DIK

Odpovědi

[Alex Kubicek]

A co vypisuje dmesg po inicializaci hostap? Jake pouzivate jadro a jake wireless tools?

[vetron]

jadro: 2.4.18-14 wireless tools: verzia 25 (wireless_tools.25.tar.gz) vypis: dmesg: nevypisal nic kernel: Aug 13 14:42:42 osiris kernel: Linux Kernel Card Services 3.1.22 Aug 13 14:42:42 osiris kernel: options: [pci] [cardbus] [pm] Aug 13 14:42:42 osiris kernel: Intel PCIC probe: not found. Aug 13 14:42:42 osiris kernel: PCI: Found IRQ 9 for device 00:0a.0 Aug 13 14:42:42 osiris kernel: Yenta IRQ list 0000, PCI irq9 Aug 13 14:42:42 osiris kernel: Socket status: 10000051 Aug 13 14:42:43 osiris kernel: cs: IO port probe 0x0c00-0x0cff: clean. Aug 13 14:42:43 osiris kernel: cs: IO port probe 0x0800-0x08ff: clean. Aug 13 14:42:43 osiris kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x290-0x297 0x370-0x37f 0x480-0x48f 0x4d0-0x4d7 Aug 13 14:42:43 osiris kernel: cs: IO port probe 0x0a00-0x0aff: clean. Aug 13 14:42:43 osiris kernel: cs: memory probe 0xa0000000-0xa0ffffff: clean. Aug 13 14:42:44 osiris kernel: hostap_cs: 0.0.4 - 2003-07-27 (Jouni Malinen ) Aug 13 14:42:44 osiris kernel: hostap_cs: setting Vcc=33 (constant) Aug 13 14:42:44 osiris kernel: hostap_cs: CS_EVENT_CARD_INSERTION Aug 13 14:42:44 osiris kernel: prism2_config() Aug 13 14:42:44 osiris kernel: hostap_cs: setting Vcc=33 (from config) Aug 13 14:42:44 osiris kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) Aug 13 14:42:44 osiris kernel: IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 Aug 13 14:42:44 osiris kernel: io->flags = 0x0046, io.base=0x0000, len=64 Aug 13 14:42:44 osiris kernel: hostap_cs: index 0x01: Vcc 3.3, irq 9, io 0x0100-0x013f Aug 13 14:42:44 osiris kernel: divert: allocating divert_blk for wlan1 Aug 13 14:42:44 osiris kernel: hostap_cs: Registered netdevice wlan1 Aug 13 14:42:44 osiris kernel: prism2_hw_init() Aug 13 14:42:44 osiris kernel: prism2_hw_init: initialized in 210 ms Aug 13 14:42:44 osiris kernel: wlan1: NIC: id=0x800c v1.0.0 Aug 13 14:42:44 osiris kernel: wlan1: PRI: id=0x15 v1.1.0 Aug 13 14:42:44 osiris kernel: wlan1: STA: id=0x1f v1.4.2 Aug 13 14:42:44 osiris kernel: wlan1: defaulting to host-based encryption as a workaround for firmware bug in Host AP mode WEP Aug 13 14:42:44 osiris kernel: wlan1: defaulting to bogus WDS frame as a workaround for firmware bug in Host AP mode WDS Aug 13 14:42:44 osiris kernel: wlan1: Warning: secondary station firmware version 1.4.2 does not seem to work in Host AP mode Aug 13 14:43:21 osiris kernel: wlan0: LinkStatus=4 (Access point out of range) Aug 13 14:43:21 osiris kernel: wlan0: LinkStatus: BSSID=00:02:2d:5e:29:f7 Aug 13 14:43:21 osiris kernel: wlan0: LinkStatus=5 (Access point in range) Aug 13 14:43:21 osiris kernel: wlan0: LinkStatus: BSSID=00:02:2d:5e:29:f7

[CIJOML]

Zacni tim, ze do karty nasmazis novy firmware :)

http://daisy.servodata.cz/~cijoml/Vyhled/utils/1.5.6.zip

[vetron]

Ono je to tak, ze tu pcmcia kartu(Long Range NL-2511CD) som vybral z original HW AP, a zasunul som ju do adaptera pcmcia/pci v pocitaci, namiesto pcmcia karty s nizsim vykonom. No a teraz by som ju chcel nakonfigurovat ako AP. Ale ako to, ze s tym firmwarom ktory tam je uz bezala ako AP(v tom original HW).

[Zdeněk štěpánek]

Aug 13 14:42:44 osiris kernel: wlan1: Warning: secondary station firmware version 1.4.2 does not seem to work in Host AP mode -------- mozna vubec neumim anglicky, ale tady je napsany ze karta HostAP neumi. Zkus ten novej firmware, treba to umet bude. Ovsem jako uz zkuseny wifista ti muzu jen a pouze doporucit tohle zahodit a koupit si jednu ZE DVOU opravdu funkcnich karet a temi jsou XI-626 a P-24. Zdenek