Portál AbcLinuxu, 26. dubna 2024 05:10
lsusblspcixinput list
Obal to pomocí <pre></pre> Takhle to nejde číst.
hacumoto@hacumoto-EP35C-DS3R:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 1058:1021 Western Digital Technologies, Inc. Elements 2TB Bus 003 Device 002: ID 045e:00f7 Microsoft Corp. LifeCam VX-1000 Bus 005 Device 002: ID 0458:0099 KYE Systems Corp. (Mouse Systems) Bus 008 Device 004: ID 04d9:a078 Holtek Semiconductor, Inc.
hacumoto@hacumoto-EP35C-DS3R:~$ hacumoto@hacumoto-EP35C-DS3R:~$ lspci 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02) 00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92) 00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] (rev 02) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1) 03:00.0 SATA controller: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 03:00.1 IDE interface: JMicron Technology Corp. JMB363 SATA/IDE Controller (rev 02) 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 05:02.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) hacumoto@hacumoto-EP35C-DS3R:~$
hacumoto@hacumoto-EP35C-DS3R:~$ xinput
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ Genius RF 2.4G K+M Receiver id=10 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ sonixj id=8 [slave keyboard (3)]
↳ Genius RF 2.4G K+M Receiver id=9 [slave keyboard (3)]
↳ G-SPY USB Gaming Mouse id=11 [slave keyboard (3)]
hacumoto@hacumoto-EP35C-DS3R:~$
Přidej ještě pro jistotu jako přílohu soubor dmesg.txt (vytvoříš ho pomocí dmesg > dmesg.txt), popř. to zase obal mezi <pre> a </pre>
Jinak jsem našel bug report
[ 0.233385] pci 0000:00:1c.3: bridge window [io 0xb000-0xbfff] [ 0.233390] pci 0000:00:1c.3: bridge window [mem 0xfc000000-0xfc0fffff] [ 0.233393] pci 0000:00:1c.3: bridge window [mem 0x80400000-0x805fffff 64bit pref] [ 0.233399] pci 0000:04:00.0: BAR 6: assigned [mem 0x80100000-0x8011ffff pref] [ 0.233401] pci 0000:00:1c.4: PCI bridge to [bus 04-04] [ 0.233404] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.233408] pci 0000:00:1c.4: bridge window [mem 0xf8000000-0xf9ffffff] [ 0.233411] pci 0000:00:1c.4: bridge window [mem 0x80100000-0x803fffff pref] [ 0.233417] pci 0000:05:02.0: BAR 6: assigned [mem 0x80000000-0x8001ffff pref] [ 0.233419] pci 0000:00:1e.0: PCI bridge to [bus 05-05] [ 0.233422] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 0.233426] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfbffffff] [ 0.233429] pci 0000:00:1e.0: bridge window [mem 0x80000000-0x800fffff pref] [ 0.233448] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.233452] pci 0000:00:01.0: setting latency timer to 64 [ 0.233459] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.233462] pci 0000:00:1c.0: setting latency timer to 64 [ 0.233470] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 0.233474] pci 0000:00:1c.3: setting latency timer to 64 [ 0.233479] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.233483] pci 0000:00:1c.4: setting latency timer to 64 [ 0.233489] pci 0000:00:1e.0: setting latency timer to 64 [ 0.233492] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.233494] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.233496] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.233499] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff] [ 0.233501] pci_bus 0000:00: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.233503] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 0.233505] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf7ffffff] [ 0.233507] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref] [ 0.233509] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 0.233511] pci_bus 0000:02: resource 1 [mem 0x80600000-0x807fffff] [ 0.233513] pci_bus 0000:02: resource 2 [mem 0x80800000-0x809fffff 64bit pref] [ 0.233516] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff] [ 0.233518] pci_bus 0000:03: resource 1 [mem 0xfc000000-0xfc0fffff] [ 0.233520] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref] [ 0.233522] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff] [ 0.233524] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xf9ffffff] [ 0.233526] pci_bus 0000:04: resource 2 [mem 0x80100000-0x803fffff pref] [ 0.233529] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 0.233531] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfbffffff] [ 0.233533] pci_bus 0000:05: resource 2 [mem 0x80000000-0x800fffff pref] [ 0.233535] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 0.233537] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 0.233539] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 0.233541] pci_bus 0000:05: resource 7 [mem 0x000c0000-0x000dffff] [ 0.233543] pci_bus 0000:05: resource 8 [mem 0x7ff00000-0xfebfffff] [ 0.233582] NET: Registered protocol family 2 [ 0.233647] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.233845] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.234202] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.234389] TCP: Hash tables configured (established 131072 bind 65536) [ 0.234391] TCP reno registered [ 0.234394] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.234401] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.234459] NET: Registered protocol family 1 [ 0.234474] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.234490] pci 0000:00:1a.0: PCI INT A disabled [ 0.234499] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.234514] pci 0000:00:1a.1: PCI INT B disabled [ 0.234522] pci 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.234537] pci 0000:00:1a.2: PCI INT C disabled [ 0.234544] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.234564] pci 0000:00:1a.7: PCI INT C disabled [ 0.234580] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.234594] pci 0000:00:1d.0: PCI INT A disabled [ 0.234600] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.234615] pci 0000:00:1d.1: PCI INT B disabled [ 0.234621] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.234635] pci 0000:00:1d.2: PCI INT C disabled [ 0.234642] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.234654] pci 0000:00:1d.7: PCI INT A disabled [ 0.234676] pci 0000:01:00.0: Boot video device [ 0.234688] PCI: CLS 32 bytes, default 64 [ 0.235001] audit: initializing netlink socket (disabled) [ 0.235008] type=2000 audit(1363585696.228:1): initialized [ 0.252403] highmem bounce pool size: 64 pages [ 0.252408] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.254170] VFS: Disk quotas dquot_6.5.2 [ 0.254223] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.254722] fuse init (API version 7.17) [ 0.254804] msgmni has been set to 1678 [ 0.255071] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.255093] io scheduler noop registered [ 0.255094] io scheduler deadline registered [ 0.255100] io scheduler cfq registered (default) [ 0.255210] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.255237] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.255279] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.255311] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X [ 0.255363] pcieport 0000:00:1c.3: setting latency timer to 64 [ 0.255395] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X [ 0.255445] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.255477] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X [ 0.255554] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.255572] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.255656] intel_idle: MWAIT substates: 0x22220 [ 0.255658] intel_idle: does not run on family 6 model 23 [ 0.255726] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 0.255731] ACPI: Power Button [PWRB] [ 0.255779] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 0.255782] ACPI: Power Button [PWRF] [ 0.257117] ERST: Table is not found! [ 0.257118] GHES: HEST is not enabled! [ 0.257189] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.268111] isapnp: Scanning for PnP cards... [ 0.277509] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.410312] Freeing initrd memory: 13804k freed [ 0.620910] isapnp: No Plug & Play device found [ 0.748487] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.748810] Linux agpgart interface v0.103 [ 0.750394] brd: module loaded [ 0.751128] loop: module loaded [ 0.751233] ahci 0000:03:00.0: version 3.0 [ 0.751247] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.764041] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.764045] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.764051] ahci 0000:03:00.0: setting latency timer to 64 [ 0.764382] scsi0 : ahci [ 0.764460] scsi1 : ahci [ 0.764545] ata1: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000100 irq 19 [ 0.764549] ata2: SATA max UDMA/133 abar m8192@0xfc000000 port 0xfc000180 irq 19 [ 0.764592] ata_piix 0000:00:1f.2: version 2.13 [ 0.764600] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.764604] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.764639] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.764901] scsi2 : ata_piix [ 0.764966] scsi3 : ata_piix [ 0.765403] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14 [ 0.765407] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15 [ 0.765436] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.765441] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.765477] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.765668] scsi4 : ata_piix [ 0.765731] scsi5 : ata_piix [ 0.766097] ata5: SATA max UDMA/133 cmd 0xe700 ctl 0xe800 bmdma 0xeb00 irq 19 [ 0.766100] ata6: SATA max UDMA/133 cmd 0xe900 ctl 0xea00 bmdma 0xeb08 irq 19 [ 0.766158] pata_acpi 0000:03:00.1: enabling device (0000 -> 0001) [ 0.766163] pata_acpi 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.766187] pata_acpi 0000:03:00.1: setting latency timer to 64 [ 0.766199] pata_acpi 0000:03:00.1: PCI INT B disabled [ 0.766510] Fixed MDIO Bus: probed [ 0.766529] tun: Universal TUN/TAP device driver, 1.6 [ 0.766531] tun: (C) 1999-2004 Max Krasnyansky [ 0.766572] PPP generic driver version 2.4.2 [ 0.766663] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.766676] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.766685] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.766689] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.766727] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.770633] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.770646] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfc105000 [ 0.784013] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.784184] hub 1-0:1.0: USB hub found [ 0.784188] hub 1-0:1.0: 6 ports detected [ 0.784256] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.784265] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.784268] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.784308] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 0.788215] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.788228] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfc104000 [ 0.804013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.804145] hub 2-0:1.0: USB hub found [ 0.804150] hub 2-0:1.0: 6 ports detected [ 0.804228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.804241] uhci_hcd: USB Universal Host Controller Interface driver [ 0.804255] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.804260] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.804263] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.804301] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 0.804329] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e000 [ 0.804444] hub 3-0:1.0: USB hub found [ 0.804447] hub 3-0:1.0: 2 ports detected [ 0.804506] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.804512] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 0.804515] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 0.804556] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 0.804584] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000e100 [ 0.804693] hub 4-0:1.0: USB hub found [ 0.804696] hub 4-0:1.0: 2 ports detected [ 0.804755] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.804763] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 0.804766] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 0.804802] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 0.804822] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000e500 [ 0.804933] hub 5-0:1.0: USB hub found [ 0.804936] hub 5-0:1.0: 2 ports detected [ 0.804996] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.805002] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.805005] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.805046] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 0.805065] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e200 [ 0.805177] hub 6-0:1.0: USB hub found [ 0.805180] hub 6-0:1.0: 2 ports detected [ 0.805240] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.805246] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.805248] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.805292] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 0.805311] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e300 [ 0.805426] hub 7-0:1.0: USB hub found [ 0.805429] hub 7-0:1.0: 2 ports detected [ 0.805489] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.805495] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.805498] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.805537] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 0.805556] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e400 [ 0.805667] hub 8-0:1.0: USB hub found [ 0.805670] hub 8-0:1.0: 2 ports detected [ 0.805775] usbcore: registered new interface driver libusual [ 0.805823] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.806228] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.806235] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.806377] mousedev: PS/2 mouse device common for all mice [ 0.806540] rtc_cmos 00:04: RTC can wake from S4 [ 0.806634] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 0.806655] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.806717] device-mapper: uevent: version 1.0.3 [ 0.806785] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.806816] EISA: Probing bus 0 at eisa.0 [ 0.806818] EISA: Cannot allocate resource for mainboard [ 0.806820] Cannot allocate resource for EISA slot 1 [ 0.806821] Cannot allocate resource for EISA slot 2 [ 0.806823] Cannot allocate resource for EISA slot 3 [ 0.806825] Cannot allocate resource for EISA slot 4 [ 0.806826] Cannot allocate resource for EISA slot 5 [ 0.806828] Cannot allocate resource for EISA slot 6 [ 0.806830] Cannot allocate resource for EISA slot 7 [ 0.806831] Cannot allocate resource for EISA slot 8 [ 0.806833] EISA: Detected 0 cards. [ 0.806841] cpufreq-nforce2: No nForce2 chipset. [ 0.806843] cpuidle: using governor ladder [ 0.806845] cpuidle: using governor menu [ 0.806847] EFI Variables Facility v0.08 2004-May-17 [ 0.807089] TCP cubic registered [ 0.807196] NET: Registered protocol family 10 [ 0.807746] NET: Registered protocol family 17 [ 0.807750] Registering the dns_resolver key type [ 0.807766] Using IPI No-Shortcut mode [ 0.807861] PM: Hibernation image not present or could not be loaded. [ 0.807872] registered taskstats version 1 [ 0.813709] Magic number: 5:648:820 [ 0.813733] ehci_hcd 0000:00:1a.7: hash matches [ 0.813774] rtc_cmos 00:04: setting system clock to 2013-03-18 05:48:17 UTC (1363585697) [ 0.813789] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.813790] EDD information not available. [ 1.092024] ata2: SATA link down (SStatus 0 SControl 300) [ 1.092073] ata1: SATA link down (SStatus 0 SControl 300) [ 1.094533] ata5: SATA link down (SStatus 0 SControl 300) [ 1.208014] usb 1-4: new high-speed USB device number 3 using ehci_hcd [ 1.232011] Refined TSC clocksource calibration: 2999.999 MHz. [ 1.232016] Switching to clocksource tsc [ 1.248039] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.256116] ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223Q, SB01, max UDMA/100 [ 1.272112] ata6.00: configured for UDMA/100 [ 1.342516] Initializing USB Mass Storage driver... [ 1.342580] scsi6 : usb-storage 1-4:1.0 [ 1.342634] usbcore: registered new interface driver usb-storage [ 1.342636] USB Mass Storage support registered. [ 1.560054] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.560065] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.568065] ata4.00: SATA link down (SStatus 0 SControl 300) [ 1.568080] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.578798] ata3.00: HPA detected: current 234435439, native 234441648 [ 1.578803] ata3.00: ATA-6: ST3120827AS, 3.42, max UDMA/133 [ 1.578806] ata3.00: 234435439 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.592233] ata3.00: configured for UDMA/133 [ 1.592356] scsi 2:0:0:0: Direct-Access ATA ST3120827AS 3.42 PQ: 0 ANSI: 5 [ 1.592487] sd 2:0:0:0: [sda] 234435439 512-byte logical blocks: (120 GB/111 GiB) [ 1.592531] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 1.592545] sd 2:0:0:0: [sda] Write Protect is off [ 1.592548] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.592567] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.598280] ata4.01: HPA detected: current 976771055, native 976773168 [ 1.598285] ata4.01: ATA-8: WDC WD5000AAKX-001CA0, 15.01H15, max UDMA/133 [ 1.598289] ata4.01: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.612915] ata4.01: configured for UDMA/133 [ 1.613011] scsi 3:0:1:0: Direct-Access ATA WDC WD5000AAKX-0 15.0 PQ: 0 ANSI: 5 [ 1.613121] sd 3:0:1:0: [sdb] 976771055 512-byte logical blocks: (500 GB/465 GiB) [ 1.613147] sd 3:0:1:0: Attached scsi generic sg1 type 0 [ 1.613164] sd 3:0:1:0: [sdb] Write Protect is off [ 1.613166] sd 3:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.613185] sd 3:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.613802] scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223Q SB01 PQ: 0 ANSI: 5 [ 1.614429] sda: sda1 sda2 < sda5 sda6 > [ 1.614826] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.617622] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.617626] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.617741] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 1.617805] sr 5:0:0:0: Attached scsi generic sg2 type 5 [ 1.642886] sdb: sdb1 sdb2 < sdb5 sdb6 > [ 1.643230] sd 3:0:1:0: [sdb] Attached SCSI disk [ 1.643241] Freeing unused kernel memory: 712k freed [ 1.643452] Write protecting the kernel text: 5628k [ 1.643493] Write protecting the kernel read-only data: 2328k [ 1.656360] udevd[102]: starting version 175 [ 1.692022] usb 3-1: new full-speed USB device number 2 using uhci_hcd [ 1.715415] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.715444] pata_jmicron 0000:03:00.1: setting latency timer to 64 [ 1.717007] scsi7 : pata_jmicron [ 1.719052] scsi8 : pata_jmicron [ 1.719536] ata7: PATA max UDMA/100 cmd 0xb000 ctl 0xb100 bmdma 0xb400 irq 16 [ 1.719538] ata8: PATA max UDMA/100 cmd 0xb200 ctl 0xb300 bmdma 0xb408 irq 16 [ 1.721517] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.721532] r8169 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 gt: příkaz nebyl nalezen[ 1.721555] r8169 0000:04:00.0: setting latency timer to 64 [ 1.721619] r8169 0000:04:00.0: irq 44 for MSI/MSI-X [ 1.722083] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xf800a000, 00:1d:7d:05:8e:fc, XID 18000000 IRQ 44 [ 1.722086] r8169 0000:04:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko] [ 1.723519] 3c59x 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.723525] 3c59x: Donald Becker and others. [ 1.723531] 0000:05:02.0: 3Com PCI 3c905C Tornado at f8014000. [ 2.047241] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 2.092016] usb 5-1: new low-speed USB device number 2 using uhci_hcd [ 2.340841] scsi 6:0:0:0: Direct-Access WD Ext HDD 1021 2002 PQ: 0 ANSI: 4 [ 2.341283] sd 6:0:0:0: Attached scsi generic sg3 type 0 [ 2.341830] sd 6:0:0:0: [sdc] 1953519616 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.342703] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 2.343577] sd 6:0:0:0: [sdc] Asking for cache data failed [ 2.343579] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 2.345079] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 2.345959] sd 6:0:0:0: [sdc] Asking for cache data failed [ 2.345963] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 2.346394] sdc: sdc1 [ 2.348210] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled [ 2.349083] sd 6:0:0:0: [sdc] Asking for cache data failed [ 2.349086] sd 6:0:0:0: [sdc] Assuming drive cache: write through [ 2.349089] sd 6:0:0:0: [sdc] Attached SCSI disk [ 2.528010] usb 8-2: new low-speed USB device number 2 using uhci_hcd [ 16.318336] Adding 2094076k swap on /dev/sdb6. Priority:-1 extents:1 across:2094076k [ 16.324667] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.324673] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 16.366127] udevd[384]: starting version 175 [ 16.407991] lp: driver loaded but no devices found [ 16.466028] Linux video capture interface: v2.00 [ 16.467799] gspca_main: v2.14.0 registered [ 16.478742] gspca_main: sonixj-2.14.0 probing 045e:00f7 [ 16.493577] input: sonixj as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/input/input2 [ 16.493691] usbcore: registered new interface driver sonixj [ 16.509296] nvidia: module license 'NVIDIA' taints kernel. [ 16.509299] Disabling lock debugging due to kernel taint [ 16.533553] type=1400 audit(1363582113.214:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=539 comm="apparmor_parser" [ 16.533922] type=1400 audit(1363582113.214:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=539 comm="apparmor_parser" [ 16.534129] type=1400 audit(1363582113.214:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=539 comm="apparmor_parser" [ 16.537174] input: Genius RF 2.4G K+M Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/input/input3 [ 16.537435] generic-usb 0003:0458:0099.0001: input,hidraw0: USB HID v1.00 Keyboard [Genius RF 2.4G K+M Receiver] on usb-0000:00:1a.2-1/input0 [ 16.548539] parport_pc 00:08: reported by Plug and Play ACPI [ 16.548580] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 16.622830] input: Genius RF 2.4G K+M Receiver as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/input/input4 [ 16.622998] generic-usb 0003:0458:0099.0002: input,hidraw1: USB HID v1.00 Mouse [Genius RF 2.4G K+M Receiver] on usb-0000:00:1a.2-1/input1 [ 16.632289] lp0: using parport0 (interrupt-driven). [ 16.678995] input: HID 04d9:048e as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input5 [ 16.679161] generic-usb 0003:04D9:048E.0003: input,hidraw2: USB HID v1.10 Mouse [HID 04d9:048e] on usb-0000:00:1d.2-2/input0 [ 16.679197] usbcore: registered new interface driver usbhid [ 16.679199] usbhid: USB HID core driver [ 16.819165] ppdev: user-space parallel port driver [ 16.830718] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 16.830725] nvidia 0000:01:00.0: setting latency timer to 64 [ 16.830730] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 16.831420] NVRM: loading NVIDIA UNIX x86 Kernel Module 304.64 Tue Oct 30 11:09:29 PDT 2012 [ 16.849807] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 16.850045] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X [ 16.850068] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 16.860023] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro [ 16.878282] usbcore: registered new interface driver snd-usb-audio [ 16.889481] hda_codec: ALC889A: BIOS auto-probing. [ 16.898867] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6 [ 16.898937] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 [ 16.898998] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 16.899059] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 16.899122] input: HDA Intel Line-Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 16.899183] input: HDA Intel Line-Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 16.899247] input: HDA Intel Line-Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 16.899308] input: HDA Intel Line-Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 17.206134] init: failsafe main process (795) killed by TERM signal [ 17.267341] Bluetooth: Core ver 2.16 [ 17.267375] NET: Registered protocol family 31 [ 17.267377] Bluetooth: HCI device and connection manager initialized [ 17.267379] Bluetooth: HCI socket layer initialized [ 17.267381] Bluetooth: L2CAP socket layer initialized [ 17.267611] Bluetooth: SCO socket layer initialized [ 17.271636] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 17.271639] Bluetooth: BNEP filters: protocol multicast [ 17.273536] Bluetooth: RFCOMM TTY layer initialized [ 17.273540] Bluetooth: RFCOMM socket layer initialized [ 17.273542] Bluetooth: RFCOMM ver 1.11 [ 17.290268] type=1400 audit(1363582113.970:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=857 comm="apparmor_parser" [ 17.290745] type=1400 audit(1363582113.970:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=857 comm="apparmor_parser" [ 17.401124] type=1400 audit(1363582114.082:7): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=888 comm="apparmor_parser" [ 17.401154] type=1400 audit(1363582114.082:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=889 comm="apparmor_parser" [ 17.403371] type=1400 audit(1363582114.082:9): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=890 comm="apparmor_parser" [ 17.403749] type=1400 audit(1363582114.082:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=890 comm="apparmor_parser" [ 17.403958] type=1400 audit(1363582114.082:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=890 comm="apparmor_parser" [ 17.464882] r8169 0000:04:00.0: eth0: link down [ 17.465018] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.465317] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 17.467930] eth1: setting full-duplex. [ 17.535927] vesafb: mode is 640x480x32, linelength=2560, pages=0 [ 17.535930] vesafb: scrolling: redraw [ 17.535932] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 17.539966] vesafb: framebuffer at 0xf5000000, mapped to 0xf8500000, using 1216k, total 1216k [ 17.540065] fbcon: VESA VGA (fb0) is primary device [ 17.540119] Console: switching to colour frame buffer device 80x30 [ 17.540130] fb0: VESA VGA frame buffer device [ 17.674539] init: teamviewerd main process (1000) killed by TERM signal [ 17.675674] init: gdm main process (999) killed by TERM signal [ 19.262199] NVRM: Your system is not currently configured to drive a VGA console [ 19.262203] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver [ 19.262205] NVRM: requires the use of a text-mode VGA console. Use of other console [ 19.262207] NVRM: drivers including, but not limited to, vesafb, may result in [ 19.262209] NVRM: corruption and stability problems, and is not supported. [ 28.016005] eth1: no IPv6 routers present [32890.920043] usb 8-2: USB disconnect, device number 2 [32896.368012] usb 8-2: new full-speed USB device number 3 using uhci_hcd [32896.593451] input: G-SPY USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input14 [32896.593566] generic-usb 0003:04D9:A078.0004: input,hidraw2: USB HID v1.10 Keyboard [G-SPY USB Gaming Mouse] on usb-0000:00:1d.2-2/input0 [32896.600629] generic-usb: probe of 0003:04D9:A078.0005 failed with error -22 [32896.604282] generic-usb 0003:04D9:A078.0006: hiddev0,hidraw3: USB HID v1.10 Device [G-SPY USB Gaming Mouse] on usb-0000:00:1d.2-2/input2 [32899.600045] usb 8-2: USB disconnect, device number 3 [32902.348015] usb 8-2: new full-speed USB device number 4 using uhci_hcd [32902.573450] input: G-SPY USB Gaming Mouse as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input15 [32902.573526] generic-usb 0003:04D9:A078.0007: input,hidraw2: USB HID v1.10 Keyboard [G-SPY USB Gaming Mouse] on usb-0000:00:1d.2-2/input0 [32902.580634] generic-usb: probe of 0003:04D9:A078.0008 failed with error -22 [32902.584165] generic-usb 0003:04D9:A078.0009: hiddev0,hidraw3: USB HID v1.10 Device [G-SPY USB Gaming Mouse] on usb-0000:00:1d.2-2/input2 hacumoto@hacumoto-EP35C-DS3R:~$
Nemáš zač. Ještě bych boj nevzdával. Zkusil bych nabootovat z CD či Flash disku nejnovější verzi nějaké live distribuce. Pokud v ní myš pojede, znamená to téměř 100% jistotu, že v novější verzi distribuce, než co máš aktuálně teď, bude chyba opravena.
Pokud tedy v live distribuci bude myš fungovat, tak nejjednodušší bude povýšit na nejnovější verzi tvé distribuce, kde by měla být chyba opravena.
Koukám, že používáš Ubuntu. Zkus tedy nejnovější verzi jenom jako live distribuci, tzn. nic neinstalovat na pevný disk. Aktuálně nejnovější je Ubuntu 12.10 "Quantal Quetzal".
Vyzkoušej až ti nastartuje systém myš odpojit a pak zase připojit do usb jestli neni chyba někde jinde.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.
18.3.2013 14:54