Dotaz: siefs a usb

[miko]

mam siemnens cx70 a kupil som usb kabel, telefon ho najde ako dca-540.

mal som kabel do com portu ten siel.

ked pripojim telefon do usb, podla dmesg sa nieco rozumne stane.

chyba je asi takato:

miko@miko:~/build/fuse-2.3.0$ export SLINK_DEVICE=/dev/ttyUSB0
miko@miko:~/build/fuse-2.3.0$ slink i
obex_startup: No such device or address

(to iste to robi aj pri mount -t siefs blabla)

modul usbserial je v jadre (aj modul pl2303 som sa docital ze ho treba)

aj tak si myslim ze mam nejako zle nastavene jadro... any sugegstions ? :)

Odpovědi

[miko]

urcite je to v jadre...

root@miko:/home/miko# echo a > /dev/ttyUSB0
bash: /dev/ttyUSB0: No such device or address

v com moze byt chyba ?

[hele]

jeste jake jadro, ve 2.6.14 to jelo urcite . v 2.6.5 mi to nejelo.

[miko]

no, tak je to jadro 2.6.5 zrovna:( ale 2.6.14 sa mi zo zahadnych dovodov nechce nakonfigurovat ( make [x g menu]config proste nejde.. btw kde mozem nastavit nejake optiony ak sa to da, lebo make qconfig (ten _takmer_ ide :)) mi vyhadzuje ze libqt ma undefined reference na glBlabla by to chcelo niekde -lgl dopisat asi)

prisiel na to, ze

insmod usbserial.ko vendor=0x11f5 product=0x0003

prinuti slink aby sa aspon o nieco pokusil aj ked neuspesne

no idem este cosi skusat :)

[miko]

uz tam mam 2.6.14 jadro, vysledok je taky ze to _obcas_ ide. mount -t siefs nehrozi ale slink i vacsinou ide hned po pripojeni mobilu. druhy krat uz nejde... ?

dmesg vyzera asi takto

...
...
usb 3-1: new full speed USB device using uhci_hcd and address 2
usb 3-1: ep0 maxpacket = 32
usb 3-1: default language 0x0409
usb 3-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-1: Product: Siemens USB Connectivity
usb 3-1: Manufacturer: Siemens AG
usb 3-1: SerialNumber:  353542002976615
usb 3-1: hotplug
usb 3-1: adding 3-1:1.0 (config #1, interface 0)
usb 3-1:1.0: hotplug
hub 3-0:1.0: state 5 ports 2 chg 0000 evt 0002
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbserial_generic 3-1:1.0: usb_probe_interface
usbserial_generic 3-1:1.0: usb_probe_interface - got id
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
pl2303 3-1:1.0: usb_probe_interface
pl2303 3-1:1.0: usb_probe_interface - got id
pl2303 3-1:1.0: PL-2303 converter detected
usb 3-1: PL-2303 converter now attached to ttyUSB0
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12

?