Portál AbcLinuxu, 27. dubna 2024 02:39
xawtv
.scantv
jde normalne a najde kanaly a zapise do souboru pro xawtv
. Zkusil jsem nainstalovat tvtime
tam chodi TV OK, ale mam 766 Celer s 256 RAM a obraz jede jak zpomaleny film. Takze nepouzitelny.
bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). PCI: Found IRQ 5 for device 0000:01:04.0 PCI: Sharing IRQ 5 with 0000:00:1f.3 PCI: Sharing IRQ 5 with 0000:00:1f.5 PCI: Sharing IRQ 5 with 0000:01:04.1 bttv0: Bt878 (rev 17) at 0000:01:04.0, irq: 5, latency: 128, mmio: 0xfcefe000 bttv0: detected: Leadtek WinFast TV 2000 [card=34], PCI subsystem ID is 107d:6606 bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP [card=34,autodetected] bttv0: gpio: en=00000000, out=00000000 in=00bfff06 [init] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) bttv0: using tuner=5 tuner 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 . ok bttv0: add subdevice "remote0"projel jsem ruzny nastaveni v
/etc/modules.conf
, ale nic.
xawtv -device /dev/video0
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.