Problemy s Adaptecem na SLES 10

Mam na SLES 10 ( SUSE ) problemy s radicem Adaptec 19160, jednou za cas se objevi v systemovem logu toto :

Nov 27 05:26:51 sles10 kernel: sd 4:0:0:0: Attempting to queue an ABORT message
Nov 27 05:26:51 sles10 kernel: CDB: 0x2a 0x0 0x3 0x9d 0x92 0x87 0x0 0x0 0x8 0x0
Nov 27 05:26:51 sles10 kernel: scsi4: At time of recovery, card was not paused
Nov 27 05:26:51 sles10 kernel: >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
Nov 27 05:43:35 sles10 syslog-ng[2417]: STATS: dropped 3
Nov 27 05:26:51 sles10 kernel: scsi4: Dumping Card State while idle, at SEQADDR 0x9
Nov 27 05:26:51 sles10 kernel: Card was paused
Nov 27 05:26:51 sles10 kernel: ACCUM = 0x4, SINDEX = 0x64, DINDEX = 0x65, ARG_2 = 0x2
Nov 27 05:26:51 sles10 kernel: HCNT = 0x0 SCBPTR = 0x18
Nov 27 05:26:51 sles10 kernel: SCSIPHASE[0x0] SCSISIGI[0x48]:(SELI|IOI) ERROR[0x0] 
Nov 27 05:26:51 sles10 kernel: SCSIBUSL[0x1] LASTPHASE[0x1]:(P_BUSFREE) SCSISEQ[0x12]:(ENAUTOATNP|ENRSELI) 
Nov 27 05:26:51 sles10 kernel: SBLKCTL[0xa]:(SELWIDE|SELBUSB) SCSIRATE[0x0] SEQCTL[0x10]:(FASTMODE) 
Nov 27 05:26:51 sles10 kernel: SEQ_FLAGS[0xc0]:(NO_CDB_SENT|NOT_IDENTIFIED) SSTAT0[0x0] 
Nov 27 05:26:51 sles10 kernel: SSTAT1[0x8]:(BUSFREE) SSTAT2[0x0] SSTAT3[0x0] SIMODE0[0x8]:(ENSWRAP) 
Nov 27 05:26:51 sles10 kernel: SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)

Po nejakem case se to samo vzpamatuje a jede dal, disk to neni, testoval jsem ho pomoci smartmontools.

Diky za radu.

David

Dotaz: Problemy s Adaptecem na SLES 10