Dotaz: Genius MaxFire G-08XU USB nejde, lsusb ho vidi v pohode

[Ondrej]

Zdravim! Snazim se pripojit ke kompu joypad Genius MaxFire G-08XU. Ovladace USB evidentne funguji, protoze kdyz zadam lsusb, tak mi to v pohode vypise Bus 001 Device 005: ID 0583:a000 Padix Co., Ltd (Rockfire) .

# cat /proc/bus/usb/devices

T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=ff60
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0583 ProdID=a000 Rev= 1.00
S: Product=2-Axis,8-Button
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms

# cat /proc/bus/usb/drivers

usbdevfs
hub
96-111: hiddev
hid

# dmesg | tail -n 50

pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng: RNG not detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Joystick [0583:a000] on usb1:2.0
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: USB HID v1.10 Gamepad [0583:a000] on usb1:3.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng: RNG not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng: RNG not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng: RNG not detected
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.5
i810_rng: RNG not detected
scsi singledevice 0 0 0 0
scsi singledevice 0 0 1 0
scsi singledevice 0 0 2 0
scsi singledevice 0 0 3 0
scsi singledevice 0 0 4 0
scsi singledevice 0 0 5 0
scsi singledevice 0 0 6 0
scsi singledevice 0 0 7 0
Adding Swap: 578332k swap-space (priority -1)
usb.c: USB disconnect on device 00:1f.2-2 address 3
hub.c: new USB device 00:1f.2-2, assigned address 4
input: USB HID v1.10 Gamepad [0583:a000] on usb1:4.0
usb.c: USB disconnect on device 00:1f.2-2 address 4
uhci.c: ff80: host controller halted. very bad
usb.c: USB disconnect on device 00:1f.2-1 address 2
hub.c: new USB device 00:1f.2-1, assigned address 5
input: USB HID v1.10 Joystick [0583:a000] on usb1:5.0

pokud se pokusim vypsat /dev/js0-3, tak mi to vypise jenom no such device
Nevite nekdo kudy dal? Jadro je 2.4.33.3, defaultni z Slackware 11.0

Odpovědi

[Ondrej]

Tak stacilo v /etc/rc.d/rc.modules odkomentovat vsechno co se tyka joystiku a usb radice a funguje to

[mato]

caute mam tiez problem s 2axis 8button genius maxfire G-08XU - zapojim ho vsetko nacita v pohode ale ked zapnem nhl 09 skace mi to (stale ide hore samo) OS: win 7