Portál AbcLinuxu, 12. května 2024 13:14
[ 8.241886] IT8212: IDE controller at PCI slot 0000:00:10.0
[ 8.308700] IT8212: chipset revision 19
[ 8.354667] it821x: controller in smart mode.
[ 8.406858] IT8212: 100% native mode on irq 17
[ 8.460115] ide1: BM-DMA at 0xbca0-0xbca7, BIOS settings: hdc:DMA, hdd:pio
[ 8.544767] ide2: BM-DMA at 0xbca8-0xbcaf, BIOS settings: hde:pio, hdf:pio
[ 8.809492] hdc: Hitachi HDT725025VLAT80, ATA DISK drive
[ 9.179577] hdc: Performing identify fixups.
[ 9.230708] ide1 at 0xbc88-0xbc8f,0xbc9a on irq 17
[ 9.553233] hde: Hitachi HDT725025VLAT80, ATA DISK drive
[ 9.923343] hde: Performing identify fixups.
[ 9.974534] ide2 at 0xbc90-0xbc97,0xbc9e on irq 17
[ 10.032503] IT8212: IDE controller at PCI slot 0000:00:12.0
[ 10.099306] IT8212: chipset revision 19
[ 10.145229] it821x: controller in smart mode.
[ 10.145246] IT8212: 100% native mode on irq 16
[ 10.145275] ide3: BM-DMA at 0xbc70-0xbc77, BIOS settings: hdg:pio, hdh:pio
[ 10.145342] ide4: BM-DMA at 0xbc78-0xbc7f, BIOS settings: hdi:pio, hdj:pio
[ 10.409999] hdg: Hitachi HDT725025VLAT80, ATA DISK drive
[ 10.717035] hdg: Performing identify fixups.
[ 10.768193] ide3 at 0xbc58-0xbc5f,0xbc6a on irq 16
[ 11.866693] hda: max request size: 128KiB
[ 11.914672] hda: 8448300 sectors (4325 MB), CHS=8940/15/63, UDMA(33)
[ 11.991490] hda: hda1
[ 12.172540] hdc: max request size: 128KiB
[ 12.220570] hdc: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=30401/255/63, BUG DMA OFF
[ 12.323657] hdc:hdc: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 12.412164] hdc: recal_intr: error=0x04 { DriveStatusError }
[ 12.412188] ide: failed opcode was: unknown
[ 23.476291] hdc: irq timeout: status=0xd0 { Busy }
[ 23.533806] ide: failed opcode was: unknown
[ 23.633224] ide1: reset: master: ECC circuitry error
[ 24.721720] unknown partition table
[ 24.765212] hde: max request size: 128KiB
[ 24.813254] hde: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=30401/255/63, BUG DMA OFF
[ 24.916287] hde:hde: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 25.004640] hde: recal_intr: error=0x04 { DriveStatusError }
[ 25.004661] ide: failed opcode was: unknown
[ 36.069895] hde: irq timeout: status=0xd0 { Busy }
[ 36.127426] ide: failed opcode was: unknown
[ 36.227834] ide2: reset: master: ECC circuitry error
[ 37.318164] unknown partition table
[ 37.361681] hdg: max request size: 128KiB
[ 37.409672] hdg: 488397168 sectors (250059 MB) w/7372KiB Cache, CHS=30401/255/63, BUG DMA OFF
[ 37.512611] hdg:hdg: recal_intr: status=0x51 { DriveReady SeekComplete Error }
[ 37.601167] hdg: recal_intr: error=0x04 { DriveStatusError }
[ 37.669164] ide: failed opcode was: unknown
[ 48.665500] hdg: irq timeout: status=0xd0 { Busy }
[ 48.723023] ide: failed opcode was: unknown
[ 48.821435] ide3: reset: master: ECC circuitry error
[ 49.908581] unknown partition table
Najskor vsetko fungovalo normalne, ale teraz je ten problem, ze ked chcem na to pole nieco zapisat tak vidim v dmesg taketo nieco:
[ 661.978174] end_request: I/O error, dev hdc, sector 345001432 [ 661.978195] __journal_remove_journal_head: freeing b_frozen_data [ 661.978218] __journal_remove_journal_head: freeing b_committed_data [ 661.978250] __journal_remove_journal_head: freeing b_frozen_data [ 661.978218] __journal_remove_journal_head: freeing b_committed_data [ 661.978250] __journal_remove_journal_head: freeing b_frozen_data [ 661.978272] end_request: I/O error, dev hdc, sector 345004928 [ 661.978301] __journal_remove_journal_head: freeing b_frozen_data [ 661.978322] end_request: I/O error, dev hdc, sector 345005456 [ 661.978352] __journal_remove_journal_head: freeing b_frozen_data [ 661.978373] end_request: I/O error, dev hdc, sector 345005480 [ 661.978402] __journal_remove_journal_head: freeing b_frozen_data [ 661.978419] __journal_remove_journal_head: freeing b_committed_data [ 661.978528] end_request: I/O error, dev hdc, sector 345009576 [ 661.978574] end_request: I/O error, dev hdc, sector 345011088 [ 685.022347] end_request: I/O error, dev hdc, sector 344932736 [ 685.022456] EXT3-fs error (device dm-0): ext3_readdir: directory #21544961 contains a hole at offset 0 [ 687.822486] end_request: I/O error, dev hdc, sector 344932736 [ 687.822591] EXT3-fs error (device dm-0): ext3_readdir: directory #21544961 contains a hole at offset 0 [ 688.475297] end_request: I/O error, dev hdc, sector 344932736 [ 688.475411] EXT3-fs error (device dm-0): ext3_readdir: directory #21544961 contains a hole at offset 0 [ 694.252807] end_request: I/O error, dev hdc, sector 344932736 [ 694.252917] EXT3-fs error (device dm-0): ext3_readdir: directory #21544961 contains a hole at offset 0 [ 704.578133] end_request: I/O error, dev hdc, sector 344932736 [ 704.581904] EXT3-fs error (device dm-0): ext3_readdir: directory #21544961 contains a hole at offset 0a filesystem sa remountne z read-write na read-only. Ked dam reboot tak v dmesg vidim taketo nieco:
Unmounting local file systems. [ 1244.285765] __journal_remove_journal_head: freeing b_frozen_data [ 1244.357777] __journal_remove_journal_head: freeing b_frozen_data [ 1244.429660] __journal_remove_journal_head: freeing b_committed_data [ 1244.504734] __journal_remove_journal_head: freeing b_frozen_data [ 1244.576644] __journal_remove_journal_head: freeing b_frozen_data [ 1244.648562] __journal_remove_journal_head: freeing b_committed_data [ 1244.723872] end_request: I/O error, dev hdc, sector 4896 [ 1244.787410] printk: 12 messages suppressed. [ 1244.837502] Buffer I/O error on device dm-0, logical block 564 [ 1244.907351] lost page write due to I/O error on dm-0 [ 1244.992297] end_request: I/O error, dev hdc, sector 0 /dev/hdc: read failed after 0 of 4096 at 0: Input/output error [ 1245.178891] end_request: I/O error, dev hdc, sector 0 [ 1245.239374] Buffer I/O error on device hdc, logical block 0 [ 1245.306191] end_request: I/O error, dev hdc, sector 8 [ 1245.366595] Buffer I/O error on device hdc, logical block 1 [ 1245.433377] end_request: I/O error, dev hdc, sector 16 [ 1245.494866] Buffer I/O error on device hdc, logical block 2 [ 1245.561636] end_request: I/O error, dev hdc, sector 24 [ 1245.623136] Buffer I/O error on device hdc, logical block 3 [ 1245.690074] end_request: I/O error, dev hdc, sector 0 [ 1245.690111] Buffer I/O error on device hdc, logical block 0 /dev/hdc: read f[ 1245.819623] end_request: I/O error, dev hdc, sector 488396928 ailed after 0 of[ 1245.905054] end_request: I/O error, dev hdc, sector 0 4096 at 0: Input/output error /dev/hdc: read failed after 0 [ 1246.036117] end_request: I/O error, dev hdc, sector 384 of 4096 at 250059227136: Input/output error /[ 1246.157549] end_request: I/O error, dev hdc, sector 0 dev/hdc: read fa[ 1246.225759] end_request: I/O error, dev hdc, sector 384 iled after 0 of [ 1246.310322] end_request: I/O error, dev hdc, sector 0 4096 at 0: Input[ 1246.382055] end_request: I/O error, dev hdc, sector 384 /output error [ 1246.463699] end_request: I/O error, dev hdc, sector 0 /dev/fileserver[ 1246.538478] end_request: I/O error, dev hdc, sector 384 /data: read fail[ 1246.616124] end_request: I/O error, dev hdc, sector 0 ed after 0 of 40[ 1246.694681] end_request: I/O error, dev hdc, sector 384 96 at 0: Input/output error Couldn't find device with uuid '29TD1l-70ab-aSe8-KJ34-m2Cp-8Rwp-33suzk'. Couldn't find all physical volumes for volume group fileserver. /dev/hdc: read failed after 0 of 4096 at 0: Input/output error /dev/fileserver/data: read failed after 0 of 4096 at 0: Input/output error Couldn't find device with uuid '29TD1l-70ab-aSe8-KJ34-m2Cp-8Rwp-33suzk'. Couldn't find all physical volumes for volume group fileserver. /dev/hdc: read failed after 0 of 4096 at 0: Input/output error /dev/fileserver/data: read failed after 0 of 4096 at 0: Input/output error /dev/hdc: read failed after 0 of 4096 at 0: Input/output error /dev/fileserver/data: read failed after 0 of 4096 at 0: Input/output error Couldn't find device with uuid '29TD1l-70ab-aSe8-KJ34-m2Cp-8Rwp-33suzk'. Couldn't find all physical volumes for volume group fileserver. /dev/hdc: read failed after 0 of 4096 at 0: Input/output errorSMART nehlasi ziadne chyby, fsck prebehne s takymto vysledkom:
root@(none)[tts/0]:~>fsck.ext3 -c -y -f -v /dev/fileserver/data
e2fsck 1.38 (30-Jun-2005)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
53497 inodes used (0%)
2141 non-contiguous inodes (4.0%)
# of inodes with ind/dind/tind blocks: 16594/6038/5
74350352 blocks used (40%)
0 bad blocks
10 large files
50247 regular files
3240 directories
0 character device files
0 block device files
0 fifos
0 links
1 symbolic link (1 fast symbolic link)
0 sockets
53488 files
Skusal som vymenit aj IDE PCI radic, aj kable, ale bez uspechu. Kde moze byt problem? Moze byt problem v disku? Vdaka.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.