Portál AbcLinuxu, 26. dubna 2024 04:27
glxgears Xlib: extension "GLX" missing on display ":0.0". glxgears: Error: couldn't get an RGB, Double-buffered visual.Hledal jsem tu na abíčku a nenašel jsem nic srozumitelného jak to spustit. Prosím o radu jak to spustit, nebo kde a jak to nakonfigurovat aby to běhalo. Aurox 10.1, Celer 600, 128MB, Rive TNT2 Vanta 32MB Předem díky za nějakou radu. PS:Jest-li jsem někde něco přehlídl tak please no flame
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name
of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated
together)
# By default, Red Hat 6.0 and later now use a font server independent
of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
Neviznám se v tom moc dobře, ale ten radek tam je. Mozna je chyba někde jinde? FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "ADI M700"
DisplaySize 320 240
HorizSync 30.0 - 70.0
VertRefresh 50.0 - 160.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "RIVA TNT2"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
Option "NoLogo" "true"A stejně prd. Obrazovka černá a na ní jen kurzor myši který při posunu nechává stopy. Takže zatím jedu jen s nv driverama. Nevíte co s tím? Já už né.
load "dri"v sekci Module pak nahradit v sekci Device
nvza
nvidiaa doplnit do této samé sekce
Option "NoLogo" "true"PS : Snad to někomu pomůže.
Section "Module" Load "dbe" Load "extmod" # Load "fbdevhw" Load "glx" # Load "record" Load "freetype" Load "type1" EndSection Section "Device" Identifier "Videocard0" Driver "nvidia" # Driver "nv" VendorName "Videocard vendor" BoardName "NVIDIA GeForce 4 (generic)" Option "NoLogo" EndSectionUpravte to podle tohoto moduly nechat pouze dbe, extmod, glx, freetype, type1 a ovladač nvidia.
# Load "fbdevhw" # Load "record"Prosím alespoň o stučný popisek. Díky
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.